Time Capsule backup not available without reboot disk

Similar Questions

• drive time capsule is not available

  The time capsule disk is not available.

  Finally, he worked on 08/08/2016.

  If the capsule is on a wireless network, other devices work on this network? Have you checked your settings on the screen of Airport utility? You've restarted the router?

  The time Capsule is the computer wifi range? Time Capsule shows a green light?

• macOS sierra time capsule does not

  I have upgraded to iOS sierra on my MacBook 2013 and 2015 s pro on 24/09/16. The time machine-

  Time capsule has not worked since. Wifi works but not the backup. We need real expert

  help solve this problem, not conjecture. I understand that if I use others

  equipment suppliers, it can give wrong. But I'm all Apple. Help, please. I should have mentioned

  It's a new time capsule airport which was working fine until I changed the Sierra.

  Thank you

  Bill

  afternoon, this seems to be a common problem - I came here looking for an answer as well. There is a smc / ram p reset fix floating MacOS Sierra - time machinestuck preparation backup on network devices. There is also an exclusion to spotlight some suggest work. I have tried both and neither worked for me, a lot more. I ended up clear time capsule. Airport utility > change > disks > erase disk. has immediately started a new backup and have not had a problem since.

• Time Capsule backup disabled on Bridge mode

  Hi all...

  I have a 3rd generation (A1355) Time Capsule and I connected on a D-Link DSL-2520U router which is connected to my DSL via PPPoE internet connection. In order to get my setup working, I had to put the network on the bridge mode settings. Since my backup Time Capsule does not work, and when I try to manually force the backup system, it is said: "the backup drive is not found. Make sure that the backup disk is connected, or select a different backup disk. »

  When I try to put the time Capsule to DHCP, it is said: "the DHCP range you have entered conflicts with your base station WAN IP address."

  Now, what can I do to get it working again?

  Bridge mode is the correct setting of the time Capsule, but you changed the 'path' that has been using Time Machine to locate your Time Capsule on the network, so that it can not find the time Capsule.

  (Gear on the dock icon)... open Mac system preferences

  Open Time Machine

  Click Add or remove disks

  Under the backup disks, click to select the current backup drive

  Click on remove the disc at the bottom right of the window

  Close the windows

  Restart the Mac.

  Then, go to time Machine again as above, click select disk and select the backup drive that you want to use, and then click on using the drive.

  Wait a few minutes for a backup start, or if you do not want to wait... click on the "clock" icon Time machine at the top of the screen of the Mac, and then click Backup now.

• Airport Time Capsule device not found

  I have the time Capsule on the airport of the TB 3 802.11ac (bought 9/2014).  It integrates the latest version of the 7.7.7.  Just last week, I received the error device not found (.. .has been previously a part of your network... etc.).  The internet connection is always good and the component of the time capsule router still works.  When I unplug the device, it can find him but eventually will go down in a few minutes.  I also did a warm reboot, but some results.  Printer connected to the time capsule does not, nor does Time Machine back ups.

  Would be grateful of any advice on why the drive not found error continues to occur.  Thank you!

  You have Back to My Mac enabled on the Time Capsule?

  If so, turn it off for the moment in the AirPort Utility and restart the time Capsule.

• How can I remove a time Capsule backups I want to recycle?

  How can I remove a time Capsule backups I want to recycle?

  Reformat the disk via disk utility. This will remove all the contents of the disc.

• I can restore time capsule backup to another computer that already has a user

  Looking for help, my laptop was stolen, thankfully I have a time capsule backup. I could buy a new laptop, but I was wondering if there is anyway I can just restore my backup on the laptop of my wife, or if that's too difficult/impossible.  Currently laptop my wife not a as user, so my question is could I myself set him up as an additional user and then use my backup time capsule of my laptop now flown to restore everything on your computer? Just a question because I don't think we need 2 notebooks more, so would be nice to not have to buy one additional laptop just to get my time capsule backup. Any help much appreciated.

  The Finder, choose utilities go to menu and use the Migration Wizard to restore.

  (139740)

• I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...

• Intermittently, Time Capsule does not connect to the cable Modem

  Capsule time bought a few weeks ago.  Barely implemented.  TC does not recognize the cable modem.  These forums to get help.  Tracking the specific set of sequence with long delays between the steps and the modem and the TC.  It worked for about a month.  Now about once a day the TC works but not internet wireless or ethernet through the CT.  If I unplug the TC and let it restart and initialize internet connection returns.  During the internet cuts I have ethernet and Wi - Fi at transport CANADA, printers, and drives on the network as well as the time Capsule backup drive and your data.  If I ever lose ethernet and Wi - Fi to TB.  In addition, the modem works fine.  If I cut the TC and to the cable modem ethernet connection I have access to the internet.

  Thank you.  All were huge last time assistance.

  If it's always the same modem... a SB6141 of Arris... There have been a number of reports of trouble with this product with Apple routers. There is no mention that in your first post a month ago, because we wanted to see if a reset of the good modem would get things works well for you.  I had the same experience as with the same exact modem you have.

  The SB6141 is a good product, and the time Capsule is as well. But for some users, these two products do not work as well together. If you call people to support for modem, they show sure to like the question time Capsule. If you call Apple, they will have a different view on things. The bottom line when you go to a support group... because it of always the other guy that you are having problems.

  At this point, the only real solution would be to decide if you want to try another brand and model of modem and keep the time Capsule, or keep the modem and try another brand of router and then connect the Capsule to the router.

  In my case, I replaced the SB6141 (I tried 3 different SB6141s previously because the ISP admitted having difficulties with this modem and some routers) with a 5341J Zoom, and did not have a single falling Internet connection since I installed the Zoom for more than a year. If your Internet service provider indicates that the Zoom is a product that is compatible with their service, you might want to try this modem.

  But unfortunately, there is no assurance that the "solution" that has worked for me will be the solution that suits you. Such is the nature of the beast, when you work with products from two different suppliers.

• ORA-38500: in USING the JOURNAL CURRENT file option is not available without waiting Journal

  I have done some testing migration of expdp on the physics of the standby database by creating db_recovery_file_dest and then convert the day before instant db db. After that test was done, I converted to the db in waiting.
  
  However the recovery process does not seem to work somehow.
  
  I ORA-38500: option with the HELP of JOURNAL CURRENT file is not available without redoing standby connect mode standby when I tried to recover managed standby database.
  
  It seems all messed up. Can someone help me on this issue? Thank you.

  Laughing out loud

  Test on mine

  Primary

  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> select thread#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
  
     THREAD# MAX(SEQUENCE#)
  ---------- --------------
           1            422
  
  SQL> 
  

  Standby

  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> select thread#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
  
     THREAD# MAX(SEQUENCE#)
  ---------- --------------
           1            422
  
  SQL> 
  

  Checking for gap

  Try this query

  http://www.Visi.com/~mseberg/monitor_data_guard_transport.html

  This is very late.

  Best regards

  mseberg

• Initial backup, Time Capsule will not end.

  I recently started to use my Time Capsule to back up my early 2014 MBA 13 '' again. However the initial backup will never end. The TC is not used as a Wi - Fi router; It is connected to the existing wireless network.

  When I started having this problem initially. I erased the disc TC and more fresh and Time Machine, under System Prefs, told me that the backup has been chugging along just great. Well... now, after he had all of August to reach the end of time Machine always shows me "waiting for full first backup."

  If I choose "save now" widget menu bar or if I let the system restart automatically backups TM shows Control Panel "backup x of x, XX, XX" and the second number continues to increase. The backup will never end.

  I searched the Ko of Apple and these discussion forums and not found the answer. What can I do to make this backup finish?

  TIA.

  The TC is not used as a Wi - Fi router; It is connected to the existing wireless network.

  And that's probably the problem, because Apple does not officially support backups Time Machine to TB unless you use the wireless TC, or connect the Mac directly on the TC using a wired Ethernet cable connection.

  Things can work with your existing wireless network, but it will be no help if it is not. Sometimes in situations like this, a Mac will back up OK wireless, and another Mac will have problems.

  As you try to add 'new' backups 'old' backup, Time Machine can also have issues with this, try to compare the old and new files and get confused about what to keep and do not keep. In this case, the recommended solution would be to delete older backups of the MBA and then start again and try a new backup.

  Wireless is never recommended for a first full backup. It's OK to use it, then much smaller incremental backups.

  If you try this course the existing wireless you have and still have questions, other than to try to save on the wireless TC, on the only other option to try would be to connect the MBA directly to one of the LAN port <>- on the back of the TC using an Ethernet cable.  Since you have an MBA, who does not have an Ethernet port, you can buy a bolt of lightning for the Ethernet card.  Maid in Gigabit Ethernet Adapter - Apple

• Since the upgrade to El Capitan my automatic backups on my Apple Time capsule do not work

  Everything worked fine until I upgraded to El Capitan... now I don't have enough space for back ups on my time capsule (1 TB is) and a couple of years.

  What can I do simple?

  Thank you

  You have 3 options.  Ranked in order of the most expensive on the down...

  (1) add a new time Capsule and start backups goes to this device. It is also the easiest option.

  (2) add a USB hard drive to the existing time Capsule and start going that animate the backups. Next best option in terms of simplicity

  (3) delete the existing and any time Capsule hard drive start over with new backups. Not too difficult, if you're good by following the instructions

• Time Capsule does not remove older backups.

  Our 2 TB time capsule is full and no more deletes older backups so new back ups fail.  We have two Macs with El Capitan. What can we do for the capsule of time delete old backups?

  Unfortunately, when the proposed backup is too large, Time Machine can not delete older files to make room for new backups.

  Your options... in terms of more expensive down... are:

  (1) add an another Time Capsule and begin to go to backups

  (2) add a USB hard drive to your existing Time Capsule and start to go back up

  (3) erase the hard drive on the existing time Capsule and start backups

• Time capsule will not recognize the backup from another mac

  Time machine will not recognize the backup from another mac

  Time Machine will never find "another" Mac backups unless you've been backup that 'different' Mac on the same Capsule you have there.

  So, we need more information and to try to understand what it is that you are trying to accomplish. Please assume that we know nothing about what you could have done in the past... (since we don't have).

• Time Capsule backup suddenly stopped working

  I used my Air Port Time Capsule since July last year, without a hitch. Then all of a sudden today, he says: 'no back ups for 155 days' (!) and I get this message:

  "The backup drive is not available. Make sure that the backup disk is connected, or select a different backup disk. »

  It is connected. I can see it in the AirPort Utility. I see it in the Finder. I access it via the finder. I am at a total loss!

  (1) what on Earth is my all backups since July 2015?

  (2) how to operate again?

  (3) a way to ensure this NEVER happens again?

  Help, please!

  It is connected. I can see it in the AirPort Utility. I see it in the Finder. I access it via the finder. I am at a total loss!

  It's a little unusual to see full access to the rest of the computer and the inability to access by Time Machine.

  (1) what on Earth is my all backups since July 2015?

  They never happened.

  During your updates... things are lost and error messages are never toward the front of the screen even if I suspect that the log is full of them.

  (2) how to operate again?

  Reset complete TC... and I recommend you wipe it and start the new backup. See the section below... my standard how to correct the answer to the problem.

  (3) a way to ensure this NEVER happens again?

  Only a stupid person would make a promise, that it will NEVER happen.

  Thinking more broadly... I say to the people in these columns now ad nauseum... Use an alternative solution. Carbon Copy clone or Chronosync are good examples.

  They can be used alongside TM... but tend to be more reliable.

  He is also much better working on a local disk instead of a network... Although with a MBPr having to plug a USB stick in the car all the time would be a brake.

  Try to CCC. It's free for a month... If you find that it works for you purchase the license.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually. (In your case, it seems not to be a problem... and I need to solve this problem, as El Capo behaves different).

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  This one is important. The auto setting uses apple straightens always not good values.

  

  For computers updated once or twice since the major point of revisions... I think that a clean installation becomes almost a necessity.

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. In the end... A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159