Time Capsule - devices do not connect

Similar Questions

• How can I get my xp computer that relates to the time capsule hard airport to connect to the internet

  My time capsule airport works to my iMac and my Sony laptop win7.

  I also have a windows xp computer that needs to connect to the internet while the airport time capsule hard cable . However, that xp computer seems not to recognize that the capsule exists and cannot connect to the internet. Can someone help me do this work? I'm not fluent in technical aspects of networks and connections. On the Sony, I just had to select the wireless network and put the password and everything was good. With the XP, nothing but problems.

  Help?

  Can your computer XP connect to Internet from other networks or simply not yours? From the description of your problem, looks like a configuration issue with your Windows XP computer and NOT the airport Time Capsule.

  Note: You do now that Microsoft does support Windows XP and that she would run as a potential security risk, especially when accessing Internet with it?

  However, if you still wish to pursue this, you can try the following to help you get started. You can post to a forum of Microsoft support for troubleshooting of networking with Windows XP problems.

  Step 1. Check your network configuration.

  To check the settings of network configuration for the correct IP address information, you can do the following:

  • In the command prompt window, type ipconfig/alland then press ENTER.
  • The results of this command will display a list of IPv4 default gateway addresses (this should be your Time Capsule) and DNS settings for all of your network interfaces (Ethernet, wireless, etc.) By default, your IPv4 address should be something like: 10.0.1.n.; the default gateway address should be: 10.0.1.1. The DNS addresses must match what your ISP provides you.
  • If you get an IPv4 address that begins with 169.n.n.n, then go to step 2 below.

  Step 2. Try to repair the connection.
  Network connection repair feature to renew the IPv4 network connection setting to try to correct the configuration on your Windows XP device issues. To access repair network connection, follow these steps:

  • Click Start, click Control Panel, and then double-click network connections.
  • Right click on the connection that you want to repair and then click Repair. Repair function will perform a number of steps automatically to try to fix the poorly configured settings for your network connection.

• Envy 15 t-j100 Select Edition: the device is not connected to the computer. Please insert the authentication device.

  Hello

  So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.

  Y at - it no information or help to clear this message?

  We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.

  The user says if 10 can be made to work well, then we can go back to 7 or 8.

  Please notify.

  Thank you for your time.

  Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.

• 9.3 OS does not complete on my iPad 2 get message that device is not connected to the Internet, when it exists, a solution?

  WWhen updated my iPad 2 with OS 9.3, when I finally install, during the verification step, message, is that the device is not connected to the Internet when connected. Anyone else have the problem? All solutions?

  Sesame problem on my iPad mini I want to finish the update already

• Error: Your device is not connected to the Internet.

  Hello

  I have a dash HID - B70 model and until last week it works fine. I used about 2 weeks ago and have had on energy saving mode after that. I tried to use it again a couple of days, and when I typed on the screen the unit remained in power save screen and showed a yellow above the clock error message: "your device is not connected to the Internet. Press to reconnect. "I hit this button and the unit tried to reconnect, but will still end up back in the same error message and the screen.
  I tried to push the reset button on the device, but I still see the same black screen and the clock with the error message once it restarts. I unplugged my wireless router and managed to get the device to show me the other wireless networks, then I plugged the router back in and reconnected (device showed that the connection was successful), but then he went immediately to the error screen.
  I can't the unit to go to the home menu at all, no matter what button I push, if unfortunately I can't even reset to factory settings to avoid the problem.

  Any advice on how to fix this? I do know not why it happened because I didn't have the routers or wireless providers, nor have I added all devices on my home network.

  Thanks in advance for your help.

  
  

• Envy DV7 HP: HP DV7 Envy your PC need to be repaired a required device is not connected

  I have 10 Windows on my HP DV7 envy.  When I turn it on I get the error "Your PC need to be repaired a necessary device is not connected."

  None of the keys work, which means I can't select startup options or select System Restore.  It just brings back me to the blue screen with the error message. So I can not try all options, I found on the internet that are made not boot master book or disable secure boot record.

  I ran the tests of memory and fast disk, as someone else suggested that memory may be bad.

  (HP please don't answer back Windows 10 is not supported.)  Microsoft has given to all customers of Windows 8. Besides it is not at all compared to the question, since the system cannot not even load the operating system.)

  I fixed that basically like this:

  1. safe mode in the bios
  2. change the boot order to put USB in the front
  3. Install Ubuntu from USB, so erase Windows

  I got stuck because I had copied the Ubuntu ISO was not a complete file.

  No doubt I could able recover if I asked HP ship me a replacement disc for Windows 8.1

  Also, I learned that you press f8, f9, f10 or f11 when you turn on the computer.  You must wait until the screen goes to sleep again and repower the computer to switch to another option.  Now key people will work until you do this.

• Pavilion 15-p051us: a required device is not connected or is not accessible - virus

  Product name: Pavilion 15-p051us
  OS: Windows 8 (I mean 64-bit, but I'm really not sure)
  
  To start the HP logo lights up and says prepare auto repair, but it brings me to a blue screen of recovery saying a required device is not connect or are not accessible.
  
  With an error code: 0xc0000185
  
  Says I need to use recovery on my installation media tools. Unfortunately, I don't have and searched online including the HP website to no luck maybe a way to order them.
  
  I also have the 3-year warranty for the laptop but not sure if that includes software problems or damage accidental just like a fall, spillage, etc.

  You can order a media recovery on your Support page. The last item in the list of software/drivers:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7242101#Z7_3054ICK0K8UDA0AQC11TA930O2

• BlackBerry Z10 works: "your device is not connected to a network", but the staff is OK

  Good day to all,

  We have a BDS server work with IBM Traveler.

  We have 1 user who, since this morning, cannot receive email.

  After looking around on the traveler and the BDS, servers, we found no manifest error.

  On the phone, we can see that the Internet/personal workspace work perfectly.

  But the BES 'Account' is in the status "not connected" and when you walk inside to examine the configs, we get the red message "your device is not connected to a network. To connect to a network and try again.

  That is, of course, completely false as works of personal data and its other, personal accounts work correctly as well.

  10.1 device.

  We triied what follows (no license):

  -> Stop / start the data on the device.

  -> Stop the data + mobile network > both start

  ->, Restart the phone

  -> Go into airplane mode > back to normal.

  We triied to reproduce the issue with the other 2 phones: both work well. If only 1 phone has the question.

  The BES server shows that, since the beginning of the question, we get this:

  <#03>[30371] (05/23 11:35:39.365): {0xAD4} {John Smith} Packet cancelled locally, Tag = 1520726

  We consider the deletion/re-create the account of a last resort and to explore other alternatives to build our knowledge base... but we are few ideas here!

  Any suggestions?

  Thank you very much!

  Jonathan

  you have the BlackBerry logo next to your connection?

  If not then do a batterypull while the power is on and see if it comes back

  happened twice with me

• Im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected.

  Hi im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected. What should I do? Thank you

  Hello

   
  1. have you checked the problem by plugging the headset to another computer?
  2. it worked before?
  3. What are you talking about ""device"is not connected?
   
   
   
  I suggest you to connect to another computer and check.
  Also check if the device is compatible with Windows 7.
  Reference:
  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/
  If it's compatible, perform the methods below
  If it is not compatible, see the following articles:
   
   
   
   
  What is program compatibility?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
  
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
   
   
  Method 1: Run the audio Troubleshooter and see if it helps.
  Open the audio playback troubleshooting utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter
   
   
   
  Method 2:
  Run the Fixit described in the article and perform the steps:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  See also:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
   
   
   
   
  I hope this helps.

• A required device is not connected or cannot be accessed error on startup blue screen

  I have a PC laptop Toshiba Satelite P75-A7200 w / CORE i7 that had been working well until I got a wild hair update to Win 8.1 since then that I was getting an error warning ' criticism of the process died ", I have not been able to get into safe mode and tried to change it w / without success. Now, when I try to turn on my computer the Toshiba logo appears then a blue screen error message "a required device is not connected or is not accessible", then it turns off after a minute or less. I created recovery disks when I bought this computer, but they do nothing. I am not very computer but can follow directions.

  Hello

  Thank you for writing to us, we are happy to help Microsoft Community.

  I checked online based on the error code you have mentioned and found that this issue is related to the UEFI secure boot fast.

  To resolve this problem, it is recommended to disable fast secure boot UEFI BIOS (Basic Input Output System) of your computer.

  To make changes to the BIOS settings, you will need to get in touch with the computer manufacturer.

  Hope that the information provided is useful. Do not hesitate to write us if you have any questions on windows and we will be happy to help you.

• Airport Time Capsule device not found

  I have the time Capsule on the airport of the TB 3 802.11ac (bought 9/2014).  It integrates the latest version of the 7.7.7.  Just last week, I received the error device not found (.. .has been previously a part of your network... etc.).  The internet connection is always good and the component of the time capsule router still works.  When I unplug the device, it can find him but eventually will go down in a few minutes.  I also did a warm reboot, but some results.  Printer connected to the time capsule does not, nor does Time Machine back ups.

  Would be grateful of any advice on why the drive not found error continues to occur.  Thank you!

  You have Back to My Mac enabled on the Time Capsule?

  If so, turn it off for the moment in the AirPort Utility and restart the time Capsule.

• New mac connects to the time capsule but does not see the old backups

  My new MacBook Pro connects perfectly to my Time Capsule, but it is not all backups that are there.  I can't scroll through them as I can with my old MacBook Pro.  The MacBook still connect to Time Capsule well and see and scroll through all the backups it.

  No idea why?

  I wish that my new mac to be able to go back through the backups as does my current MacBook.

  Thanks for any help.

  Since El Capo OS a lot stricter security.

  You will generally not be able to simply use a backup Time old Machine as you did in the past.

  Backups made by different computers must be used via migration assistant... not just opened in TM.

  However, you can always copy a file or folder, you must manually via the Finder... ride the sparsebundle and access... If you have issues copy folder in the form of TM and then paste it in Finder... There are different ways to trick the it.

• Comments on Time Capsule network does not

  I recently installed and configured my new Time Capsule (TC) and created my home network, that works without problem. The guest network distributes however, 169 IP addresses to any device connected to it. My TC has the following parameters:

  Internet: Connect using DHCP, IPv4 address: 192.168.0.10, Internet Options configure IPv6: link-local, wireless: welcome and feedback network enabled with both wireless security WPA/WPA2 Personal, wireless Options: not used, network: router Mode: Off (Bridge Mode). I tried to use DHCP and NAT (distributes 172 IP address for iPhone and iPad and internet work), but my TC light flashes orange and the home network is not working correctly. What is the correct Assembly and my home and guest network can work properly? Thanks for your help!

  Network: Router Mode: Off (Bridge Mode).

  The prompt will not work with the TC in bridge.

  I tried to use DHCP and NAT (distributes 172 IP address for iPhone and iPad and internet work), but my TC light flashes orange and the home network is not working correctly.

  It of the right mode for wireless guest... but is the wrong way for the TC, because then you have double NAT.

  Reset you the TC to plant before you set up or do you exchange you bridge DHCP and NAT... If the later, it won't work... you must first factory reset.

  In my humble OPINION Apple made a stupid decision to prevent comments in mode bridge... but you can't change it.

  The bridge is the right settings for the TC... you use the wireless on the main router as a guest... wireless or you should fill the main router in order to use the TC as the only router.

• Airport Time Capsule 2013 loses Internet connection

  Hello! Help, please! Bought a new airport Time Capsule 2013, hung, everything works well, but it several times a day, disconnect from the Internet. Saves only the reboot. It is very annoying ((the provider said it sees it's requests on a regular basis but does not correct. Apparently she must ask for options and more them do not ask, and she periodically asks for new, but do not correctly. It is for the USA, and I am in Ukraine. I have a wedding? (((((

  Apple routers can be very problematic on some connections... You use PPPOE with any kind of modem? Apple routers have proved to be unreliable with this setup for some people. In particular the fiber connections simply do not work very well.

  For you help, we need to know what kind of internet that you have and the modem... brand and model may not mean a lot but the actual type, is it a pure modem or a router? Or do you not need a router at all. If it is an installation of fiber you plug straight ethernet of ONTARIO at the time Capsule?

  The demands of love.

• Bluetooth devices will not connect after a long period of absence

  It started in the last 3 months, I'm not sure of that OS upgrade specifically.  I currently have Version 10.11.3.  I have a MBP late 2011.  I use a keyboard, trackpad and bluetooth magic, bought the same time as my mac.

  Whenever I come back from a business trip (usually a day or two max), my bluetooth keyboard and trackpad will not connect.  They appear in the drop down bluetooth devices, but when I select Connect, nothing happens.  I did everything the new standard batteries, SMC/PRAM reset, nothing helps.  I then manually have to pair them up with difficulty using Set Up Bluetooth Trackpad/keyboard.  It will show "found", then say could not pair.  I have the power on the devices several times his cycle, and then hold the power button 'on' to the pair.  Usually, it takes 5-10 minutes and is terribly frustrating.  Once I get the paired, as long as my stays Mac in the same room with the devices, they pair very well.  Appreciate the advice.

  99 + % of the time, there is a previous event - you indicate that this has been the case for «...» 3 months... »

  What event would it? Upgrade to El Cap? Nothing at all you can think of that has occurred "3 months ago"