Time Capsule visitor files a network (associated with possible network connectivity)

I have one Capsule of 3 TB I bought in early 2015.  I had a very frustrating problem from the beginning with her down my network, apparently at random.  I tried a lot of different things, and nothing worked, so I post to see if anyone else can help.

The TC is plugged directly into my UVerse router/gateway via ethernet and I put the TC to have a static IP address.  The Uverse router firewall has a rule for the TC and TC shows how a router cascade in the rou UVerse.  I have wireless 2.4 GHz and 5 GHz when put in place on the TC.  I have a Mac Mini connected directly to it via ethernet, but it's a recent thing (maybe I was hoping that it would help).  I have also a PC attached to it for internet access only windows.  I have two Macs backup via Time Machine, well I tried to disable backups on one to see if that has had an effect (it didn't).  In fact, I have a whole list of notes on things I tried in the last two months, since I started to really tackle this problem seriously.  In particular, I've tried steps 1 to 5 in this link: Time Capsule constantly default to be recognized by Airport utility if I have not tried a factory reset.  I'm running the latest versions of OS X and iOS.

The basic model is that I have the TC set up and work.  The wireless works fine.  Time Machine will back to it fine.  I can see the TC in the Finder.  I can open the AirPort on a Mac and iOS utility and it is 'green '.  All right.  Then, at a random time in the next few days (the longest one since I started to take notes is 7 days), the TC will drop from the network.  The without wire will be there and still works fine, but Time Machine will not be able to find it for backups, it will not be displayed in the Finder.  AirPort (iOS or Mac) utility shows a yellow triangle with an exclamation point and says that the device is no longer part of my network.  I have to unplug the TC and plug it back again so that he can return to the top.  As soon as I did that, everything will return to normal and be fine for a few days, and then he disappeared again.

Tonight, however, I connected to another event.  I was watching something on my AppleTV when he started the buffering.  I grabbed my iPhone to see if my internet has declined.  More or less on a whim, I checked the airport utility and noticed that the TC showed a green dot but 'Internet' showed an orange dot.  A minute or two later, the AppleTV started playing video again, so I checked again airport utility and this 'Internet' time, has a green dot and the TC showed the usual brand yellow triangle / exclamation indicating it was abandoned.  I noted the time and then went back to look at what I had looked at.  About two hours later, I went to the power of the TC cycle and understand what to try next.

The AppleTV is not connected to the CT.  It connects to the UVerse bridge (it is connected to the ethernet on the back of one of the set-top boxes UVerse).  This means that the loss of the internet was for everything in the House, not only the TC.  Something about the process seems to have caused the TC to drop from the network somehow, but everything remains recovered him very well.  Looking the UVerse bridge, it seems rebooting once since then (about an hour and a half after the TC dropped) but not by anyone in the House (I don't know if perhaps AT & T pushed something in the modem or if it is defective).

So, no idea why loss of connectivity would cause the TC had to give up in the network?  Of course, it also appears, I may have a problem with the gateway Uverse, but if the TC goes down when everything is ok, it suggests a problem here as well.

Since you seem to have picked up some things from my post...

We will continue the process... This is where life becomes difficult. It is not uncommon to what you feel.

Just to get the full picture.

The TC is plugged directly into my UVerse router/gateway via ethernet and I put the TC to have a static IP address.

I would prefer you to the TC using the bridge... using standard DHCP... (you can leave the Uverse for him apply a DHCP reservation).

Once you do that... move the cable that connects the TC to the WAN Uverse on TC to the LAN port... It is fine in bridge...

If it always falls I have a more serious way to do. It is much more complicated, however, because apple has removed all controls on sensitive router. But I think you will find that the WAN port is dubious on the TC. It can appear at different times and with different modems/routers...

Alternatively, you can take the TC to Apple and have them replaced... It took me three goes to get a decent one. And I'm not even sure that the fault will not be displayed again in the near future out of warranty.

But it could appear perfectly when Apple test it... and the replacement can be just as bad... in other words it is a deeper problem that Apple realize.

Another thing tricky, I discovered.

Airport routers stick to the local domain... even packed... they do not Pick-up area of the main router.

This means that some devices will lose the connection because they are on the wrong field. It is possible to change the field on the Uverse make local as well... Since apple has not all the controls of the airport. I did some time ago on my main router and I can hardly give you direct evidence that helps... as many adjustments it is one of the many small things that are in addition to the lack of reliability that can help if you get the other 20 on the right. I think it helped...!

From there on, we need to work a little more on maybe the ethernet connection... or the LAN port 100 Mbps gigabit Uverse? I think I'd rather see you adjust the speed of 100Mbps as long as your internet speed is less than that of course for gigabit.

Give me some screenshots of the configuration... It is also useful.

Tags: Wireless

Similar Questions

  • Open files are more associated with a connection

    Sorry if this has been posted before, but I couldn't find any mention of it.

    Steps to reproduce the problem:

    -Open SQLDev
    -Open a connection
    -Open a file (using the "Files" tab in the left pane)

    Result: the file is not associated with the connection open, and you will have to manually select from the dropdown at the top right.

    Previous versions didn't work as expected and current behavior is extremely boring.

    Hope you'll fix it as soon as POSSIBLE.

    Kind regards.

    Alessandro

    To summarize what we have:

    1. before 3.2 newly opened file based PL/SQL Editor have been associated with the connection 'default', and as xxsawer pointed out, it was a bug.

    2. once 3.2 newly opened editor is not associated with any connection and requires the user to choose one explicitly.

    After a little reflection, it seems that fix correct is for an editor newly open to study the project.qbql mapping and if there is an entry, then choose this connection (which, of course, can be changed if the user wants so).  Am I missing any other usage scenario?

    Edit: implemented for ai2.

  • New Time Capsule ranging from Windows to Mac with file sharing.

    OK, so we bought a new time capsule recently and my family migrates slowly over Apple products.

    My question comes from having moved all our old saved files from various sources during the share of time capsule. Currently, the file system is FAT32 because that's what it was by default and I don't see an option to adjust it.

    "My wife has a time machine backup works fine already on the device, but when she opens the 'data' /: Time Capsule" on the Mac, we don't see any of these files that I put in there. What should we do, she can be seen on Mac.

    What OS is the Mac running?

    Can you please show me what you can see on the Mac... because the screenshot of Windows with all the deleted folder names is not helpful at all.

    I assume you can open all windows files... did you create the folder in windows?

    Let me suggest that you create the folder in the Mac. then copy the files through him, to the windows machine.

    Apple uses file permissions, and permissions have become significantly more restrictive of the end. Windows seems to ignore... but you might need repair permissions until it works.

    NOTE... the appearance of the windows FAT32 is not real... It's because of the way windows reads the network of the TC function... the drive is not formatted FAT32 in the TC... It is HFS +, a Mac format... offered by SMB (windows network blocks) which windows reads with FAT32.

  • Time Capsule no longer works in conjunction with the ISP modem

    Hi everyone, thanks in advance for any help you can provide, and my apologies if similar topics have already answered - rushed for this post, so I did not have too much time to browse the forums - please point me in the right direction if other threads exist!

    I'm in the United Kingdom and Virgin like my ISP... I had my Time Capsule for almost a year now and if it had connected to the Virgin Super Hub (dial-up Modem mode), without any problems. A few weeks back, I started to notice the drops intermittent in the Internet, until it finally went down all together without apparent reason. Now I can no longer use the Network Time Capsule using a Macbook, laptop computer Windows, Smartphone, Tablet, or Console games (I can always connect to the network, but there is 'no internet'). After talking at length with Virgin they basically blame the Time Capsule and say they cannot help me because it is not their technology. Since cutting the Capsule and turning back on the Super hub wireless, everything works again. I tried the simple things like rebooting, check connections etc., but to no avail.

    I have a lot of backups on the time Capsule (I use it for work purposes), so I'm afraid to play with things too in case they are deleted, but now desperately need to get operational new... Should I look for to reset the Capsule of time and/or remove/reset the wireless network I created when the first set up (if everything resets is possible without deleting the stored files)? Any help or advice would be much appreciated... Sorry for the long post!

    Thank you guys so much!

    The first part is to ease your mind... the TC is perfectly ok with reset... nothing can be deleted by using the reset button or reset everything in airport utility... the only way to erase the hard drive is to clear its contents through the disk tab in the airport utility.

    We noticed a lot of problems with the WAN port on the TC... And a bunch of modems... This can happen a day or day 366... but once it starts, it doesn't go away.

    Connect the TC in the Virgin hub working in router mode full... you're going to fill the TC.

    1 factory reset the TC.

    Universal factory reset

    Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

    NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

    2. make a new configuration of your Mac or iOS devices.

    With the wan of the TC plugged into the hub of Virgin by ethernet it should choose default wire bridge... If this isn't the case, manually change the configuration.

    3. once it is bridged leave the connection of the Virgin hub since the LAN of the TC port WAN... and see how it goes...

    If it works ok for the backup then continue to use it... If it's still questions... Please post screenshots... or consider to resume to apple... in the United Kingdom, you should have a legal guarantee of a couple of years... much longer warranty Apple offer directly.

  • Time Capsule backups of different networks?

    I have a Time Capsule that serves ONLY to expand my current network, but is also used for the backup of a single computer through Time Machine. If I take this time capsule to a new place, which has a different network I can configure it to join the new network and continue the backups Time Machine to a computer (which moves with it) without losing any old backups? If so, how can I say to join the network at the new place.

    Thank you

    Roger

    The time Capsule cannot 'join' a wireless provided third-party router, if that's what you're asking.

  • How to connect my Time Capsule to a WiFi network?

    Happily, I use a Time Capsule for years as a WiFi router connected as a bridge to the router provided by my supplier.

    Now, I'm moving to a place where internet is already provided by an access point in my new apartment and included in the monthly cost of the facilities in this village. The access point is hidden behind the ceiling of my apartment and doesn't have any port ethernet except the one used to get the internet. WiFi which will be available for me is configured by an administrator with the name of my apartment.

    My internet needs TC that the ethernet source and I wonder what I could do to work around this problem. I don't see any option in the settings of TC to connect to an existing WiFi.

    While waiting to move to the new apartment, I did a test by trying to create a scenario similar to the House, for example by using the wifi router of my provider to create a wifi network, then using an extension of WiFi that is connected to A WiFi network and connect my TC via ethernet connected on WiFi extender set up my TC as a bridge and the creation of a WiFi B with my TC that I can use with my devices. It works fine, but I wonder if there is something I'm missing or a better solution or possible issues related to this configuration.

    Tnxs.

    My internet needs TC that the ethernet source and I wonder what I could do to work around this problem.

    In a Word, nothing. The TC must connect to a network by using a wired Ethernet cable connection. The only exception to this would be a Workbench where you already have a router Apple providing a wireless signal, in which case the TC can connect wireless to "extend" the network.

    While waiting to move to the new apartment, I did a test by trying to create a scenario similar to the House, for example by using the wifi router of my provider to create a wifi network, then using an extension of WiFi that is connected to A WiFi network and connect my TC via ethernet connected on WiFi extender set up my TC as a bridge and the creation of a WiFi B with my TC that I can use with my devices. It works fine, but I wonder if there is something I'm missing or a better solution or possible issues related to this configuration.

    This is how the TC must be connected to the network of the apartment. If your extension does not work with the network of the apartment, an AirPort Express could be used to 'join' the network wireless of the apartment, and then provide an Ethernet connection to the Treasury Board.

  • Time Capsule hidden files

    How are you?

    I have a big problem, I made a copy of my macbook to time capsule 3 gen and delete of macbook.

    Now I need to use my files and I can't, they are transparent and do not open but to inspect the show that using 30 GB.

    How can I solve this problem?

    These files are extremely important.

    There are permission issues interesting past especially with El Capo.

    This could have been caused by you not deliberately creating a directory until you moved your files.

    On your screen to get information, there is nothing wrong with permissions, but nothing!

    You have enabled see hidden files in Finder? I don't think it will help, but you should try.

    You must also use the same computer and the same username... but if wipe you the computer and clean installed which can also be a problem even if you use the same user name.

    I wish I could just give you a bunch of Terminal commands to copy the files to your computer. My brain is too old to remember all the commands and I'm too frustrated to get them... but if you want to learn to make google copy of the files of the terminal. (rsync commands can be more mature to use). By giving access to the root, you can copy the files.

    The alternatives are

    Plug in a USB key in the TC... it must be big enough for all files on the TC and Mac format. Usually just say a drive of the same size... IE if your TC is standard Gen3 with 1 TB disk and then use a 1 TB USB drive or more.

    In airport utility to archive the TC.

    Certainly not erase it... I put a red box around erasing...

    Once you have finished of archive (it's pretty slow, but once started, you don't have the computer running)... Plug the USB key directly on the computer.

    Then you can repair permissions... utility disk used to do but El CAPO disk utility is a useless piece of lard.

    http://osxdaily.com/2015/11/04/verify-repair-permissions-Mac-OS-x/

    Huge progress in El Capo is to remove the permissions in disk utility and bring it back to the command-line... you can clearly see the progress made in simple GUI OSX...! (Sorry I still use.. Mountain Lion works very well!)

    Another way to work around the problem...

    The old gen3, you can easily remove the CT disk... get a USB to Sata (HDD holder or external cable and power) adapter. And plug the USB into the computer... It's really the same thing as above but you don't have to buy another USB key if you do not.

    Yet another way to work around the problem...

    There is another way... a secret path... (think Gollum and the col de Minas Morgul, Cirith Ungol) I'm Arachne... who has lived for centuries in the Hollows of secret... Talking to me directly... my email is opened in the profile. You must give me remote access and I can help you. Maybe it's the last access of type resort to Mordor. (You can guess my last reading list).

  • Hard, my time capsule airport is connected to my network. I also use it as my Wi - Fi. The time capsule disconnects from the network periodically and does not restore I have to restart to reconnect. What problem I have

    Hard, my time capsule airport is connected to my network. I also use it as my Wi - Fi and the backup. He constantly falls the internet connection and I have to restart the so he can reconnect. What problem I have?

    What brand and model of your Internet modem you have the Capsule Time (TC) by Ethernet? What exact model of the TC do you have? ... and who is your ISP?

  • Time Capsule and nearby contradictory network of country Codes

    All my gear (Time Capsule 4th generation, MacBook Pro mid-2010 and iPhone 5) was purchased from resellers Apple supported in South Africa. They are all a few years now, but only recently my MacBook Pro and iPhone to my Time Capsule WiFi connections have been falling frequently and do not reconnect automatically. I have to turn off my WiFi on my MacBook Pro and turn it on again to reconnect. My favorite network is the 5 GHz range.

    I ran Diagnostics wireless and it lists this problem:

    The only problem is that the neighbouring network has the code to the right country, ZA, and my Time Capsule has one, Go bad, as my Time Capsule does not give me ZA option even though I bought it in South Africa from a supported Apple retailer:

    How is that?

    My Time Capsule firmware version is 7.6.7, my OS X 10.11.6 and my iOS 9.3.4.

    Post edited by: n c h

    Your Apple dealer supported delivered for you... by mistake or other... an Apple product markets in Europe.

    You can contact the seller about the error and ask them to correct the error, since Apple does not provide users the ability to change the codes of the "region" on their products.

    In theory, a really good hacker... which includes the Apple programming... peut be able to change things, but to do this, you must give them full access to your private network, probably something you do not want to consider unless you knew the pirate very well.

  • How can I connect my Airport time capsule to my WiFi network so he just backup my Mac and not extend nor want to be a base station

    How do I connect/install my time capsule airport to my new WiFi network so she just backup my Mac and not to extend my WiFi or want to be a WiFi hotspot

    There is no way to connect a TC to a wifi network. It must be connected by ethernet to the main modem or to the router.

    I don't understand what you're asking...

    If you want that the backup more wireless computer... How the TC cannot work as Wifi hotspot... It's impossible.

  • Airport Extreme will not read Time Capsule trying to create network roaming

    I have read all the forums on that alone and became frustrated. I am creating a roaming network for a time at an airport extreme capsule. I followed the directions of countless times without success. Time Capsule is set to DHCP and Nat, while the extreme is in Bridge Mode and has the exact same name and password network settings. Now, I have to say that the ethernet cable connecting is extremely long (well over 100 meters) and I know that the connection will degrade, some, but my lap top is able to capture the signal when I connect it directly to the cable coming from the time Capsule, so I know that the cable works. In fact, this is how I am writing this post right now! My problem is that the Airport extreme will not even read the time capsule at all. Can someone help me please? A friend told me that I might have to configure the router second to accept the connection at a slower pace? I don't know what that means. Sorry to be a pain.

    has the exact same name and password network settings.

    Just to double check that you mean the password and the name of wireless... not the base station name and password the names of base station must be different.

    Now, I have to say that the ethernet cable connecting is extremely long (well over 100 meters) and I know that the connection will degrade, some, but my lap top is able to capture the signal when I connect it directly to the cable coming from the time Capsule, so I know that the cable works.

    To the limit sometimes the gradient exceeds just slower... it does not connect.

    If you check the laptop goes to the Advanced preferences network ethernet to the last tab has the speed dropped to 10Mbit? The extreme is not able to go as low automatically... and unfortunately there is no controls for the later models.

    What model is your extreme?

    If it's a Gen5 or an earlier version... you can use older airport utility to set the speed of the wan port. This feature is removed from models later, of course... and the AU later so does she. If you can go try it using full duplex 10mbit. If that works try 100mbit full duplex, but you might find it's too fast.

    A friend told me that I might have to configure the router second to accept the connection at a slower pace?

    Your friend has a good idea.

    I would have cut the cable in the middle... and put an end to both ends. Then place a switch on the line (not a router). A switch is a bit like an amplifier. It is to retransmit the signal so it can go another 100M...

    The other issue is on pairs... If you have installed this cable yourself and terminated yourself you were affecting the pairs?

    Ethernet is delicate to the wire because of its origins as the wiring phone... where the Center pair is for the phone.

    MacBook won't connect to the Internet via long cable?

    Here is a very similar problem to yours... was bad ethernet endpoints. Break the pairs at your own risk.

  • Time capsule is not displayed but the work of WIFI connection

    Hello

    I have a Time Capsule 2 giga, which is used as a WIFI router connected to my normal router via Ethernet and an Airport Extreme, main, used as extension. Until today everything worked well.

    Now, when I open the Airport utility to display the connection, it shows me that the TC and AE are not registered more (device not found). But I can still access the Wifi and internet via networks, I created, but not the backup.

    I unplugged the TC and AE, reconnected them, reset, then the connection worked.

    But now it is again.

    Does anyone have the same problem?

    Concerning

    Unfortunately, this issue is not new and has been reported a number of times since OS X Mavericks.

    AirPort Utility is based on both the mDNS (aka, Hello) and IPv6 IP protocols to find an AirPort base station.

    When access to the airport through the AirPort Utility, try the following, in order, accessibility with the utility check after each step:

    • Check the local connection. If you try to access the airport wireless, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
    • Try to access the base station using the utility file > configure other... option. Then enter the IP address of LAN - side base station (the default value is: 10.0.1.1) and password of the administrator of the base station.
    • Make sure that the base station and your computer are configured for IPv6 link-local only.
      • For a Mac: System preferences > network > Wi - Fi or Ethernet > advanced > TCP/IP tab > configure IPv6: link-local only
      • For the AirPort Base Station:
        Note: You may temporarily connect your Mac or PC directly to the base by Ethernet station to access.
        • From a Mac: AirPort Utility > select the base station > change > Internet tab > Internet Options... > configure IPv6: link-local only
        • Since an iOS device: AirPort Utility > tap the base station > press Edit > tap Advanced > tap on IPv6 > change configure IPv6 to: link-local only > Tap actually
    • The base station power cycle. Remove the power branch of the socket adapter and then wait 15 seconds before plugging back in.
    • Perform a ' default ' reset on the base station.
    • Finally, if you try to access the Airport via an Ethernet connection, make sure that your Ethernet port is NOT configured for Jumbo frames, that is, by using a MTU of 9000 +.
  • Said airport Time Capsule LAN Ethernet cables disconnected, but they are all connected

    We have a Time Capsule airport 2nd generation connected to a Comcast Modem for Internet service. Our network is suddenly saying that the LAN Ethernet does not work because a cable is unplugged. However, I checked all the cables and connections. I disconnected all devices and then only plugged my Mac a to. A continuous Wi - Fi connection to work but not the Ethernet LAN. I tried to use another LAN cable. He also said that a cable is unplugged. We need the Ethernet LAN to access high-speed Internet and I tried everything and can not operate. The Ethernet LAN has been upward and years of work. If the Capsule or the Comcast Modem was defective, we would not have Wi - Fi access to the Internet, but we do. Material preferences network has always been implemented are configured automatically. However, the speed is now empty display instead of speed. If I change the settings to manually set up the material, I am still unable to set the speed manually, because when I try to select the up-down arrows next to the speed, nothing happens. It's as if the speed setting has been disabled. It's so frustrating. And I have no idea how to fix this.

    If you have not already completed a power cycle full of your network, now would be a good time to do this.

    Turning off all network devices in any order you want

    Wait a minute

    Turn on the modem first and leave 2-3 minutes, he managed by itself

    Switch on the device connected to the modem and leaves turn a good minute

    Keep power devices one at a time about a minute out until the entire network is back

    Check the network

  • How can I move my old TIme Capsule at the new Time Capsule backup files?

    For five years, I use a 2 TB TC. It is also the main router wired into my local network.

    Have the new TC even router feautures?

    If I buy the new TC I would like to transfer the backup files stored in the current TC. Is this possible? How?

    Thank you very much for your support.

    Beppe53

    1. Yes.

    2. click here and follow the instructions.

    (144542)

  • Internet with possibility of connection DNS issues

    Able to browse internet but cannot solve half of sites visited.

    [Window title]
    Windows Network Diagnostics

    [Main instruction]
    Windows cannot find the host name "books.google.com" using DNS

    [Content]
    The domain name server is maybe out of service.

    [Windows found a problem that cannot be repaired automatically] [Cancel]

    [Window title]
    Windows Network Diagnostics

    [Main instruction]
    Windows cannot find the host name "books.google.com" using DNS

    [Content]
    The domain name server is maybe out of service.

    [Windows found a problem that cannot be repaired automatically] [Cancel]

    There is a router involved and seems to operate normally.  Config IP/tous indicates that 192.168.2.1 is the IP address of the DNS.  Looking for tips to solve problems

    I think your DNS server IP is incorrect - it is a local IP address and you want a (often, they include two) provided by the ISP who has been on the internet.  Set DNS settings for the DNS setting automatically if they are not already like this.  If this does not work, then contact the ISP and ask for their help in the configuration of your connection - specific DNS settings.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • Scripting - change existing polymorpic vi - dependencies problem

    I wrote a nice little tool using scripts to make it less time consuming to create polymorphic screws for my libraries and functional global / action of the wrappers of engine to make an interface for the object/data features «»  I hated having to cli

  • How can I delete unwanted updates from the list?

    Windows 7 update list more than 35 languages to be updated.  How I removed these updates from my list of updates not installed so that I see only the coming updates to install in the future?  Whenever I open the list of updates, these 35 languages co

  • Need help with the error "user environment.

    I get the following message to the start and now all my personal files and settings are gone.  Help, please. Environment of the user - Windows cannot load the locally stored profile.  Possible causes of this error include insufficient security rights

  • Updates change the resolution

    The last two times that installed Windows automatic updates, the next time I used the computer, the resolution was changed to one that is less than the optimum for Windows Vista.  I did a system restore every time to solve the problem, because it was

  • Pavilion P7-1254: monitor goes to sleep

    I leave my computer on 24/7.  After several minutes of non-use, the screen goes black and the power button on the monitor HP ha17 turns yellow.  Most of the time, I just have to move the mouse or press the enter keyboard key and the power button on t