time control system

Similar Questions

• Timer & events system process

  I usually use a "smart" delay dealing with the events, but I wanted to use a thread separate to process system events. Wording of menchar here, I feel that using a timer, it is automatically in a different thread. Is this true?

  A timer from asynchrous (in fact, all the timers async for a given process) runs on a common, separate thread.  A 'ordinary' timer is a Panel control that will run a reminder on the thread which instructed the Group of experts.

  Events system includes GUI events as I understand it, and these can be worked on the thread that the Committee.  Thus, on the face of it, you do not want to process system events using a 'regular' timer, not an asynchronous timer.

  I don't know exactly what will happen that if you did a process system events on an asynchronous callback to timer on its separate thread - some things may work, others might not.

  In the old days, CVI had a "processGUIevents" function, which was different from the function of "handle system events".  I don't know if CVI maintains this distinction much longer.

  I don't use a timer to make a smart delay, I put the thread to sleep and not the timing, rescheduling the thread after some time operating system.  You do not have a problem, unless you happen precisely set the 'smart' delay in a separate thread (a you created explicitly, or the CVI runtime provided thread timer async) and not expect to update the GUI, you have loaded on another thread.  I intend the delay "smart" to be used only from the main thread - which is the point of it, it allows the process to sleep but will react to user on the GUI input within a short time.

  It seems that the delay NOR will be spinlock, at least in some situations, and NEITHER was told that they treat events from the system during this period, at least in certain situations.  So, using the Delay(), NEITHER would have the same issues if use you some other thread than the thread that has loaded a GUI you are using.

  If your application does not have a graphical interface, there is no problem to use the smart delay on any thread, that I shouldn't think.

  I hope this helps.

• best type of measure daqmx for several closed loop control system

  Hello

  I wonder what kind of type of measure daqmx which are suitable for the control system of closed loop with control about loop 128?

  I design unique loop with continuous sample and sample application. The two correct answer. But I don't know if the control loop number increases.

  Another question is, clock synchronization of time needed for such a system?

  taov,

  I recommend you to use continuous sampling because it is time of material while on demand collection is software time.

  As for the RTOS system, please see this link.

  CarmenC

• iPhone 6s 9.3.2 bluetooth doesn't always work only not with the control system of Mercedes

  Connection Bluetooth iPhone 6s with Mercedes control system does not work with version 9.3.2.

  (Last worked with 9.3).

  Hello..

  On your iPhone, tap settings > general > reset > reset all settings , and then restart your iPhone and then try Bluetooth with the control system of Mercedes.

  * No data is lost due to reset

• lack of LabVIEW MathScript commands for control systems

  I look at these:

  • https://www.YouTube.com/watch?v=sbUqlhpaHoU (2007)
  • https://www.YouTube.com/watch?v=PfCcB8hodv8 (2013)

  It comes with LabVIEW control system engineering.

  I have 2015 LabVIEW MathScript RT and a trial license for the library control and Simulation.  I also installed MatLab license, but it doesn't have the toolboxes of the control system.

  They both use the command 'SS' in MathScript.  I can't find.  I get errors.  I am looking for help and he's not here.  It is not in the examples.  When I look at the block schema of VI of the video HAS I have fewer controls on mine.  I get the PID, fuzzy and System Identification.  I do not have "SISO.

  I have several assumptions about what is wrong:

  • It has been removed from the MathScript RT module.
  • I need a package of different tools or demo.
  • It has a new name that is not intuitive.

  You can help me find the "ss" command so I can reproduce what they do?

  You have installed the wrong version of the Control Design and Simulation module - version must match the version of LabVIEW (i.e. 2015, in your case).

  Download/install the older version and you should be good to go.

• Property string color control system

  I'm trying to change the background color of a control/indicator system string through the Text.BGColor property, and I wasn't able to do.  After that I changed the command/indicator of modern, I was able to change the background color.

  I am not mistaken?  Or some control/led catergories have no background color property, even if it is to show as an option?

  You cannot change the color of any control system. Their appearances to adapt to the operating system running the LabVIEW application on.

• The color control system

  Hi all

  y at - it a way to color a Boolean control system.

  I use a Boolean system control with "changes when you press on" mechanical Action. He wants her to be green when it is real and by default if the value False. But I am unable to color in the customization mode.

  How can I color it?

  Thank you

  Ritesh

  Controls from the system palette are color-matched to the theme of the operating system and cannot be changed.

  If you want to use custom colors use a control among other palettes.

• PDA time control is not editable

  I have a PDA LV8.6 application installed on an iPAQ hx2490c running Windows Mobile 5.0.  On the front is a cluster that contains a DateTime control and a control chain.  Date/time control cannot be changed by using one of the functions available on the local keypad.  The control of the chain changes very well.

  The components of the date and time can be selected, and the cursor moves between the numbers correctly, but back on the elements have an effect on the values or type a new value.  This seems to be a problem with the control of time.

  Hi Michael,

  I gave it a try and I've seen the same behavior as you. It seems that direct input is not supported (I tried other versions as well) and is unfortunately not documented. I'll make a point report to R & D as something that we must fix, or document. There are often cases like this, that just needs to be better documented with the Mobile Module (because of the process of compilation involved), and that we just need to find a way around.

  The options seem to be to use the up/down keys, or the browser popup. The browser allows you to enter the date and time via the on-screen keyboard. Otherwise, you can also try to manipulate digital and string entries in the timestamps (there are screws that do).

  Thank you for reporting this issue. We appreciate any comment like this, we can get!

  see you soon,

• How can I remove "windows multi control system.

  does anyone know of the 'windows multi control system', software trial version, how do I remove it?

  He wads indicated as a trial version, I do not want to buy it, it now break all, and it seems that I have to buy it.

  does anyone know of the 'windows multi control system', software trial version, how do I remove it?

  He wads indicated as a trial version, I do not want to buy it, it now break all, and it seems that I have to buy it.

  It is also a malware (malicious software). In other words, your computer is infected.

  Click HERE. Download Malwarebytes. Install the program. To create a folder in the start menu. Uncheck the boxes to update and run Malwarebytes. Now, click Start > all programs > Browse to Mawarebytes folder, click it. Within the Malwarebytes folder click the Tools folder. Click on Malwarebytes Anti-malware Colt. A window will open as shown below. Click one of the buttons of the colt. Press a key when you are prompted. The malicious process will cease to run and Malwarebytes will update and then launch the scanner. Follow the prompts to scan with Malwarebytes and remove all detected object.

  

  

  

• Date and time system continues to change each time the system starts.

  I noticed that the time and date of my home PC gets changed every time the system is booted. The default date is set for Jan. 2008, when in fact it should be July 2014.

  Also, my PC became slow death. I use Windows 7 on 1 GB of RAM, 250 GB PC. I used last my home PC 2 years back, but there has always been someone to use it.

  It shows the OS disk to 7 GB of free, when in fact I never installed or anything unnecessary stored on the disk of BONE; Whatever unnecessary programs were there, I uninstalled them recently, keeping just a few essential ones. After uninstalling, it shows to 7 GB of free, when in fact it should be more than that.

  I use Avast anti-virus, which I think is unnecessary, that its not to protect my PC and as other programs, too, is quite dead slow.

  The system is infected by viruses? Manually, I checked the system for viruses and clean the system of all unnecessary and, program files, but I'm still not sure whether it is a virus or a PC problem.

  I am a COMPUTER analyst, and's just done it 2 days that I use my PC at home. I could format my PC, or where applicable be buy Windows 8 with a new processor.

  Please advise.

  Thank you and best regards,

  Ralph Davidson.

  Hello

  You really need a minimum of at least 2GBs of RAM to run Windows 7 well enough.

  As you have only 1 GB of RAM, which seems to be one of the reasons why it is slow.

  Increase the physical RAM or try ReadyBoost:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  Looks like you have some problems.

  Wrong Date/time

  If after you set the Date and time, and then stop and restart your machine and the time returns to the year 2008, and she did this whenever you reset, then restart the PC you have a CMOS battery has failed in the motherboard.

  They cost about $5 and are easy to replace.

  How to replace a CMOS battery.

  http://www.computerhope.com/issues/ch000239.htm

  ________________________________

  For hard disk space:

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  And for general maintenance on your machine:

  You should have used Malwarebytes in previous advice here on hard drive

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary make mode safe mode with networking: AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  @@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• Project files Eclipse (BB JDE Plugin) to record in the version control system?

  Hi all

  What are the files to save in a BB App Version control system developed with the JDE plugin for Eclipse?

  And those to be excluded?

  In addition the .java, HR Manager, rrc files and images to follow, what are those needed for Eclipse and those for the BB plugin? Others?

  Except .cod, .jar and .jad, what are the "useless"?

  Thanks in advance,

  MY

  JDW is the workspace
  JDP is the description of the project
  all the others are useless.

• vCO Plugin Version Control System Support

  I read in some places that there is support for maven vCO to manage workflows (and other stuff of package) in a build and version control for the side dev.  In the Orchestrator Release Notes, there is a bulleted list item:

  • The version control system support
    Client vCenter Orchestrator offers the possibility to export existing packages directly to a folder. Once workflow packages are exported, they can be easily integrated with a version control system and the content can be easily worked within the team.

  And in this forum thread, I read that there is even a maven plugin to serialize an XML file and the binary .package...

  Version control for the workflows of vCO and packages

  The problem is that I can't find a lot of documentation of all this stuff of Maven.  I found the following link talking about the maven repo, which comes with the vCO.  However, I use the vCO comes with the vCAC device, and that the link does not work against my camera vCAC.

  Creating Plug-Ins using Maven

  (1) where the docs on the maven stuff?

  (2) where the maven repo in the context of the Oct in the context of device vCAC?

  Thank you!

  I think we are talking about different things:

  Versioning of workflows (and other 'content' vCO) vs vCO developing a Plugin.

  Of course, you must first included in your Plugin development process, too.

  Maven integration mentioned in the development of Plugin release notes targets vCO, it is available in the 5.5.1 'stand-alone' device, but NOT YET in the 5.5.1 version that is part of the vCAC.

  As Christopher mentioned, go to the 'Develop with vCO' link on the homepage of the device to see the commands to use for developing a plugin maven archetypes.

  If you are not interested in the development of a plugin for vCO, but 'just' for version control workflows, it is not of interest.

  See you soon,.

  Joerg

• Hi, I just bought Adobe Acrobat Pro DC. I used the link that was sent to me to download. But the download was not successful. After trying 5 times, the system says, now I downloaded too many times and has refused to let me download it again. It's someone

  Hi, I just bought Adobe Acrobat Pro DC. I used the link that was sent to me to download. But the download was not successful. After trying 5 times, the system says, now I downloaded too many times and has refused to let me download it again. Someone from Adobe is reading this? How can I get this fixed a problem? Thank you.

  Download Acrobat products | Standard, Pro | DC, XI, X

• Oracle forms version control system

  Hello

  Which tool is best Version and difference, audit reports and Oracle Forms.

  My environment is

  OS = Redhat 5.9

  Database = 10.2.0.1

  Developer = 6i patch 17

  Thanks in advance

  I'm used to subversion, but this does not mean that it is the right tool for you. GIT is a distributed version control system that provides the ability to create local chapters that sometimes miss me in subversion, for example when I do a greater research who needs significant changes to code.

  At the end of the day, you read about the characteristics of some version control systems, to play and see if it fits your needs. At least that's what I did 7 years ago when we checked the subversion.

  For example, take a look here:

  http://en.Wikipedia.org/wiki/Comparison_of_revision_control_software

  Don't be overwhelmed by the amount of VCS out there. That's just my opinion, but the free Source Open (like subversion or GIT) VCS are at least as powerful as their commercial counterparts (of not more powerful), so I will abstain to scrutinize sales.

  What is diff/merge is in a team of 4 developers I guess having to resolve conflicts is rather rare?

  There are a few possibilities but to compare changes:

  -convert your forms to XML format and compare with a plain vanilla diff viewer: conversion of an Oracle Forms Application

  -convert the pll files in text format gross LDP with rwconverter and compare with a spectator ordinary vanilla diff

  -use a commercial tool like FormsTool - ORCL Toolbox

  I don't know, maybe there are other tools of differentiation/fusion available as well, but that's what we use (Forms tool in collaboration with rwconverter to merge pll files, as this does not well in the forms tool but not the fault of the tool itself, but on the API, it based on...)

  see you soon

• "APP-OFA-48289: unknown error when creating control systems (immobilization).

  Hello
  
  I have problem
  
  Navigator: Fixed Asset Manager > Setup > system > control systems
  
  When I tried to create in the system controls are error message:
  
  "APP-OFA-48289: unknown error." Please contact your system administrator. »
  
  
  OS: Linux
  EBS: Oracle R12.1.3
  Database: 10g
  
  
  Thank you
  
  Escaline

  Navigator: Fixed Asset Manager > Setup > active system > system controls

  When I tried to create in the system controls are error message:

  "APP-OFA-48289: unknown error." Please contact your system administrator. »

  OS: Linux
  EBS: Oracle R12.1.3
  Database: 10g

  Please see (APP-OFA-48289 unknown error when recording data in system controls form FAXSUSTL.) [ID] 966382.1).

  Thank you
  Hussein