time (for wsn 9791) in MAX server configuration


I need to set up a time for my gateway WSN9791 server in order to ger readings with timestamp of remote nodes. How can I do?

I already checked this forum and other sources of information on this issue and has concluded that the time server is configured by using MAX under "Remote Systems > NOR-WSN9791 > System Settings" but I have not found any arrangement for the NTP server there.

My system configuration is:

-Windows 7 Professional

-LabView 2013

NOR-WSN 2013

-MAX 5.5.0f0 of worm.

-a WSN9791 gateway

-eight knots of WSN3202




Finally, I asked the technicians support of OR who have come to find a solution.

I report the message that describes the problem.


Why can I not set a time for my NOR-WSN-9791 gateway server?

It is a known problem in NI MAX 5.5 and 5.6 MAX OR. The time server option was not be displayed due to a change in the backend of the system settings page. Workaround to view the setting of the time server was created. The following steps will allow the option of time server OR 5.5 or 5.6 MAX MAX OR

1. on your development computer, go to C:\Program NIUninstaller Instruments\MAX\UI Providers\DefaultRemoteUixml\ to C:\Program Files (x 86) and 64-bit windows \National Instruments\MAX\UI Providers\DefaultRemoteUixml\ for 32-bit windows.
2. in the directory C:\Program Files (x 86) of Providers\DefaultRemoteUixml\ \National Instruments\MAX\UI, make a copy of the original mxrmcfg. DDPSystem.def.xml original-mxrmcfg file. DDPSystem.def.xml. this backup the original file to undo the changes.
3. open in Notepad the file mxrmcfg. DDPSystem.def.xml

4 replace the contents of the file with the following:


5 restart NI MAX

After you follow these steps, you will be able to set the time server on the NOR-WSN-9791 via NI MAX.


Tags: NI Products

Similar Questions

  • Activate connections encrypted for the database engine (SQL Server Configuration Manager)

    Hi team,

    I have a quick question, on the protocols for properties of SQL. Option:

    SQL Server Configuration Manager > SQL Server Network Configuration > Protocol for SQL_xxx (right click) > properties, we can see two tabs:

    Tab 1: flags

    Tab 2: certificate

    If I put the value of Instance of hide = Yes, 'Force Enctyption', the fact must be set to YES as well?

    Or Enctyption of the Force must be activated in order to hide the instance?

    What is recommend settings?

    I can see there are good article, but would appreciate if a response.


    Thank you

    + Moin

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  • WSN-9791 gateway crashes

    Hello, dear OR engineers!

    There is a problem with WSN-9791.

    There hangs after a month of work.

    WSN driver/firmware 1.1.0f3.

    In the MAX is not displayed any module. Work has been pursued only after restarting WSN-9791 to MAX.

    Now I'm about to update driver for version 1.2. Anyone know can help to resolve the situation?

    Hi Kolan,

    The update to version 1.2 of WSN is certainly recommended. because it fixes bugs and improves performance.

    WSN 1.2 update

    First update the Firmware of the bridge, then each node as well.

    A problem with the bridge would probably have an impact so nodes to see if the problem persists after the update of the firmware.

    All the best,

  • VI LabVIEW Run-Time Engine adapter server configuration

    I want to connect to use the desktop execution trace toolkit to debug LabVIEW code modules using the adapter runtime TestStand.  How can I configure Server VI using LabVIEW VI in the LabVIEW Run-Time for TestStand engine adapter?

    Have you tried to create seqedit.ini (really .ini) or even in the directory of the executable that you use for the TestStand UI?


  • Solution for Bluetooth PAN server configuration

    -Internet on Bluetooth PAN profile
    -Connection for laptop (Toshiba Satellite A300 1 2 (WinXP SP2) with Sony Ericsson K810i with BT PAN)
    -Computer as a server of PAN (!). Lance PAN Mobile phone connection-> computer.
    You can use internet to mobile phone to laptop.

    But it's bug in Toshiba PAN-server - right click doesn't work in pan-Server tray :( (Local Russian (?))

    * Configuration server PAN *.
    1. options:
    set of 2 boxes in the Bluetooth dialog options (service of pan, pan DHCP service), the [ok] button
    2. Press win - r, type: cmd
    Enter (case sensitivity "") ":"
    CD "c:\Program Files Toshiba Stack\"
    TosBtPSS.exe /END
    TosBtPSS.exe /NAP

    If it is absent pan server in the status bar - check your network connection BTPAN (Bluetooth Personal Area Network) enabled in the control panel and try
    TosBtPSS.exe /NAP

    ((3 set the IP address for the network BTPAN connectivity: (I don't know how Toshiba DHCP server works, but it works!)))
    You can use your own DHCP server configured...

    You can make these instructions batch file...

    Sorry, my bad English)

    P.S. to the developer of Bluetooth PAN server: fixed a bug, please)

    Thanks for this interesting article.

  • WSN-9791 Firmware

    I'm trying to update the firmware on my WSN-9791. I see the 9791 in Max and OR network browser. I use MAX version 4.7.7f0. The current version of the firmware 9791 is 1.0.1. I have the ni9791fwROM_LV861_LV2009 file. Once I click on the Firmware update, I click Yes and I see: Check The WSN gateway Firmware consistency... After that a few seconds, an error message appears saying: a communication error occurred during the update the WSN. Reboot and try.

    I tried to restart but it does not work.

    Any help is appreciated to muvh.

    Thank you

    Hi wv,.

    It seems that it is a network connection problem. For the most part, the software installs our hardware restarts in installation mode and trying to reconnect to the computer now to begin the installation of the software. At this stage there may be re-problems connecting to the PC. In practice, this problem manifests exactly as you described.

    Here are a few troubleshooting steps:

    -Drop your firewalls

    -disable the antivirus

    -set your camera to have a static IP (see this kb).

    -turn off wireless on your PC

    If your computer has multiple ethernet ports or several cards it can also cause problems like this.

    I would like to know how they

  • authorization for AAA and GANYMEDE unavailable server scenario

    I installed a PIX for users authentication for telnet and enable access. I have permission to install a subset of users can run only display orders. This set works as expected.

    The problem is when I simulate and network failure and try to get access the PIX console. I can't run the enable command because the command shall not be permitted. I have to use means of recovery of password to access the PIX. How to do this? Can I have permission to order processed locally? Can I associated with the command show a lower level of the priveledge? If so, how and how can I limit the user to this level of privilege (via GANYMEDE)? I confiscate doing?

    Thank you

    If the PIX is configured for GANYMEDE authentiaction and RADIUS server is unavailable for authentication, there is no way to rescue or get around this issue at this time.

    You can configure the pix to get back to local authentication if Ganymede is not available.

    Release then (I think 6.3 and above) who will be available.

  • Set up the time capsule airport as a media server

    I would like to know the procedure step by step to set up my Airport time capsule as my media server to watch movies, listen to music. No help here please? Thanks in advance.

    Step by step is simple, because they do not exist. This is because you cannot use Time Capsule as a media server because it does not provide this type of service. At best, you can use your TC for storage media. Then you still have a media server to access these files for distribution. This media server could be iTunes, Plex, or in infusion for example.

  • WSN-9791 frequency selection and interference

    WSN-9791 indicates that it can operate on the 2.4 GHz band channels 11-24 (I'm guessing that USA is limited to 11).  How to avoid multiple interference OR WSN, in the same neighborhood?  Is there a way to set or determine the channels that the network is working in?  For example, with the 802.11 standard common internet hubs can fix them to use one of these 11 channels.

    Thank you


    Hey Garret.

    You are right that channels 25 and 26 are outside the range of 802.11, but they cannot be used for the same reason that you can't go to channel 11 for 802.11 here in the United States.

    Also, for the gateways in the same neighborhood, you must assign different channels.  Gateways running on the same channel in the same vicinity will cause problems for both networks.

    The questions keep coming!


  • Can not find driver for CompactLogix L32E in OPC Server OR

    Anyone know how to contact the CompactLogix L32E Lookout 6.5.

    It doesn't seem to be a driver for it in the OPC server from OR.  Can someone point me in the right direction.

    I thought that the 5300 ENI:CompactLogix would work, but it does not work.

    Thanks to the folks at Kepware. I was able to get this working for CompactLogix L32E.

    Step 1: In the OPC Server OR create a new channel. The channel name can be anything you want.

    Step 2: Device driver will be ControlLogix Ethernet.  You can also enable diagnostics if you want.

    Step 3: Network adapter. I used default.

    Step 4: Write only the latest values.  Service at 10. (These are the default settings and are recommended.)

    Step 5: Finish new channels configuration

    Step 6: Click the icon to create the new device

    Step 7: The name of the device can be selected.

    Step 8: Select model of device in this case CompactLogix 5300

    Step 9: Device for me ID been XXX.XXX.XXX.XXX, 1, 0 IP address (note the 1 redirects the path at the bottom of basket.) 0 to the location where the processor is)

    Step 9: Device synchronization.  Leave the default values.

    Step 10: Automatic demotion leave unchecked.

    Step 11: Leave default values do not generate start remove create and enable the subgroups

    Step 12: Port and watchdogs with default settings

    Step 13: Options of the project leave default. (In my case, I've changed to short because that's what most of my tags was)

    Step 14: Create tagname of the device.

    Step 14: Finishing Device setup.

    You now have two options.

    Option 1: Start creating labels according to your needs. (This is what I did)

    Option 2: Newly created device right click and select property.  Then select the database creation and click auto create.

    Go to the belvedere and create the new driver.

    Select Client OPC

    The server name will be on the menu drop down. National Instruments: NIOPCServers

    Click OK

    You must be done and smiling.

  • Question of 2012 of R2 group key Distribution Server configuration.

    Hi all

    I searched online for more information on the problems of kdssvc. and addition of KDSRoot keys that have been problematic.

    In looking Site and Services snap-in and display of the Service node information I see the Server Configuration file, but no input config key Distribution of Service Group.

    I don't see anything online that would allow me to recreate the Configuration of the server. Is there a way to re - generate the Cryptography keys properly here and allow me to move forward with additions of Cle_principale. I have a 2003 with a r2 dc 2012 functional area in the field of parent and child.

    In the test of items off I see kds configs are always available and kdsrootkey can be created after the deletion of the entry of the Server Configuration. I'm looking for documents of deep dive on the subject.

    Any help is greatly appreciated.


    This issue is beyond the scope of this site and must be placed on Technet or MSDN



  • Blackberry enterprise server configuration will not accept the connection.

    Original title: remote terminal BlackBerry or resource will not accept connection

    Blackberry enterprise server configuration


    1. What operating system is installed on the computer?
    2. What exactly are you trying to achieve?
    3. What is the full error message received?
    Since your post looks like this, the problem is related to the server, Blackberry enterprise server, that's why I suggest you to report the issue to the links below for assistance:
    I hope this helps!
  • I try to use media center as my for my entire home media server.

    Original title: expanders

    I try to use media center as my for my entire home media server.

    After experimenting with several servers and clients on tv

    I decided to use a computer at each location tv, I want that these pc's to connect to the central server (windows media server)

    I can't choose and configure the best player on the client PC.

    can I use windows media center on a second computer as a client or remote control?

    or can I use media player?

    How do I configure this? or where is the documentation?

    What devices can be used for an Extender?

    Basically, the only device that you can use as an Extender is a Xbox 360 console. You cannot use another computer. All third-party Extenders are abandoned. Media Center started as Windows 10. http://Windows.Microsoft.com/en-us/Windows7/set-up-a-Windows-Media-Center-Extender has information about the Setup program.

  • SQL to set overall time for all work


    We had a maintenance COMPUTER each night window that starts at 22:30 for many years.  Looks like that will change to start at 23:00 every night instead. We have hundreds of "hard coded" ad-hoc jobs at 22:30 (not inherit) that needs to be changed to 23:00 start.  The jobs are not inherit time due to a current bug who inherited the time is not picked up when insertion in annex jobs who do not have a calendar.

    I need a SQL script that can change the world for the start time for me, so I can't spend an entire day by clicking on the graphical interface.

    Appreciate any help.

    Thank you!

    Hey Tyler,

    Just a little warning: as with the SQL query that modifies the data base of the Admiral in a form, code must be tested and validated by Cisco Support before applying the changes in your own environment. Otherwise, if you run any piece of code that will break the database of the Admiral, this will void the contract between your company and Cisco etc. Note that this piece of SQL code is intended to guide you in the right direction, so that you can view and change your environmental needs, and ALWAYS back up your database of Admiral.


    -Tide uses a default funny SQL server date depending on version, it's okay to take effect the

    ' SET jd.jobdtl_fromtm = ' MM/DD/YYYY 11:00:00 PM.
    OF jobdtl LIKE jd
    INNER JOIN jobmst AS jm
    ON jd.jobdtl_id = jm.jobdtl_id

    -to determine whether employment is ad-hoc when no calendar is from jobmst
    WHERE jm.evntmst_id IS NULL AND
    JM.jobmst_active = 'Y' AND
    JM.jobmst_dirty <> 'X '.

    - AND jm.jobmst_id = XX, where XX is only linked to a single task for test purposes


    The Derrick

  • IPCC 4.0.4 1-server for the installation procedure 2-Server w/HA

    Does anyone have the correct procedure for a Server 4.0.4sr1 monkey (still running MSDE) to a fully redundant dual server, configuration of availability very?

    Will this work?

    1. remove existing SR1 4.0.4/MSDE server (I have to?).

    2. install the SQL/Execute SQL utility on primary

    3. install CRS on the standby server

    4 install the utility SQL SQL/Run

    5 Install SR1 on both boxes

    6. active components on the standby server

    7 active Editor.

    Am I missing something? Measures of out-of-order?

    Thanks in advance

    This URL should help you:

    Release notes for Cisco Customer Response Solutions 4.0 (4):


    The IPCC with CallManager compatibility in the following document.


    Release notes for Cisco CallManager 4.0 (2) on the Cisco ICS 7750:


Maybe you are looking for

  • Satellite A500 - HDMI never knit - error don't pass the test regza

    Hi mate, I come from Italy and, first of all, I want to apologize for my English... ^ ^I'll try to explain my problem: Whenever I try to connect to my Pc to my TV by HDMI port "Satellite A500'... an error pops up: _The tv is turned off or in standby

  • Satellite A200-10W: I lost dual-mode Touchpad after Windows update

    I got a satellite A200-10W. The touchpad worked well at the beginning. Then, an update of windows has been installed and I lost dual mode on my touchpad. It is for me a normal function as a touchpad, but the mode button does not work. It lights, it d

  • Cosmetic glitch of Boolean properties window

    When you select 'Properties' from the context menu of a Boolean control, the following window opens: Note the location of the checkbox "show the Boolean text." It can be expected, but I doubt so.

  • EliteBook 8460p: BIOS password problem

    I wanted to make my starting the computer from a USB/CD/DVD key, but there is no option to do so. There is a BIOS password on the computer It is entered incorrectly 3 times. No 'CNUxxxx' code is seen, only "system locked, please restart" or something

  • on the ISA async map

    I am a technician who fixes office computers / laptops. When it comes to "viruses" I've seen what they can do. In some cases, the only option is to rebuild like Windows XP, Vista, Windows 7. The laptop I am train, has no modem yet, there under "netwo