Time Machine asking to create new backup, backups, but seems to work very well

Similar Questions

• my time machine just to complete a backup, but it is not listed?

  I have three macs backed up on a time machine. The mac, I want to migrate was on the list, but I made a new backup to get the latest version. Now that it's over, it is not on the news on the time machine. No idea where it went? It drives me crazy.

  Your question is unclear.

  I have three macs backed up on a time machine.

  You mean a Time Capsule? They are backed up by Time Machine on every Mac.

  The mac, I want to migrate was on the list, but I made a new backup to get the latest version.

  Mac that you want to migrate from appeared in the Finder with a sparsebundle? It's still there... Have you opened it manually and check the dates?

  Now that it's over, it is not on the news on the time machine

  Sorry now it gets too complicated... did you really mean Time Machine here?

  If the Time Machine works normally... hourly backup you would not need to do anything special, so I'm lost exactly what you're doing different.

  No idea where it went? It drives me crazy.

  Me too.. I don't know where he's been... because I don't know what that means, or it you are talking about.

  Missing the sparsebundle to the backup?

  It is simply not enough the last backup date?

  Backup details will be in the paper... you can go through it and find out what happened.

  If you are migrating to a new computer before get rid you of this computer... Just use migration between the method of computers... not the method of TM. Transfer works very well... better even... If you connect two computers together through ethernet (love at first sight would be fantabulous)... and transfer on the standard gigabit network. If your method of backup fails for some reason any.

  But there are as many reasons for the failure of TM is not easy to understand.

  Use a work around if it is important to do this via the backup instead of direct.

  for example... a USB plug into the computer and use it as the target for backup... TM has done well above the local level as network drives.

  You can also create a clone bootable disk USB using Carbon Copy Cloner who is free to use for one month.

• Time Machine: Frequently said a new backup must be created on my hard drive NAS. Nothing seems to be in disarray when this happens. I can't infer why.

  In what circumstances, Time Machine deduce that a backup is unusable and tells me that he should create a new on my hard drive NAS Buffalo?

  My system is:

  -OS X: 10.9.5

  -MacBook Pro

  -4 GB of memory

  -Hard drive 500 GB

  I asked that your thread moved to the forum of the Mavericks.  Leopard people may not have the same problems as you.

• New Canon MS216 all-in-one works very well (test prints work.) But it does not print some documents I send to her.

  Support Menu Ex driver is not installed. Do I need? I am running Windows 7 and that you have installed a new MF216 Canon all-in-one. It keeps switching me to fax or scan, when I want to do is print my computer USB connected articles.

  Hi Irma,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the number of full model of your printer?

  This problem may occur if the settings or device drivers are corrupt.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the printer Troubleshooter and check.
  Refer to this article:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions provided in this Microsoft support article and check.
  Reference:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• InDesign CC closes on opening a separate, previously created with this version of the program work very well.

  What can I do maybe? Tried to restart the computer and reinstall the program. I need the current file!

  Any help much appreciated. Thank you.

  This could help with the problem of CC app: App does not open. Wheel of progress turn continuously

• Time Machine every few weeks stopped backup because it must create a new backup. 9 to on MY Cloud EX2 takes 4 full days. Crazy to keep losing all backup dates.

  Time Machine every few weeks stopped backup because it must create a new backup. 9 to on MY Cloud EX2 takes 4 full days.

  Crazy to keep losing all backup dates

  Message reads

  "Time Machine has conducted an audit of your backups on"WDMyCloudEX2". To improve the reliability,

  Time Machine must create a new backup for you"

  Click Start a new backup to create a new backup. This will remove your existing backup history. This may take several hours.

  Click Back Up later to be reminded tomorrow. Time Machine won't perform backups during this period.

  Is - this common, no way to stop it?

  Just take a brief look at WD for 'My Cloud EX2' site, they list El Capitan as an operating system supported. Mavericks is the latest OS listed. Probably you need to contact Western Digital support.

• Why Time Machine will not erase old backups when it needs more space for a new backup?

  I have problems with Time Machine.  I am running on an iMac (21.5 inch, end 2012) with a processor Intel Core i7 3.1 GHz and 16 GB 1600 MHz DDR3 memory.  My OS is El Capitan, 10.11.3 version (15 d 21).

  Since a few days I received the following Time machine error message:

  Time Machine could not complete the backup "IoSafe.

  Backup disc neds 47,49 GB for backup, but only 39,98 GB are available.  Select a larger drive for backup or do

  the smaller by excluding the backup files.

  I thought that Time Machine was supposed to automatically delete older backups when there was not enough space on the backup drive.  Am I missing something?  Is that what I can do to diagnose the underlying problem?

  -Is [Larry] is-

  When you enter Time Machine, you see windows cascading over time. The foreground window represents the current state of the data and those behind it successive snapshots of data taken by Time Machine. Is there only a snapshot (i.e. one behind the windshield), or more than one?

• Time Machine wants to finish the backup

  I recently had a repair on my MacBook Pro.  They replaced the Logic Board 2.5 GHz.  Time Machine now wants to do a full backup instead of only since my last backup.  Should I just let a backup completes or is there a way to backup only since the last of them?  Will allowing him to make a full backup take too much space on my external hard drive?  The drive is fairly new and I know that there is enough space (for now.)  Apple advice for troubleshooting time Machine said to call the repair center, but I thought someone here might be able to help.  Thank you.

  This is quite normal. Time Machine it's an another computer because the new logic board. So, you have to make a new backup. If you have no space on the backup drive, then erase the disc first.

• I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  You can add another drive to accept backups Time Machine... assuming it is correctly formatted for Mac to Mac OS extended (journaled), but things are not exactly "continue."

  You have not indicated if you intend to add the player to the USB port on the Time Capsule, or connect directly to your computer using USB or FireWire connections. Or the other method works, with the option to connect directly to the computer being the faster connection.

  Once the disc is added, you would go in Time Machine preferences (click the "clock" at the top of the screen on your Mac) to add the disk for Time Machine backups and delete the old Time Capsule disk, since backups will go is no longer this destination.

  Since you have a new drive, Time Machine will do a new full backup of your Mac and then go forward with incremental backups.

• Time Machine could not complete the backup

  Since installing a Superdrive replacement, Time Machine is not back up.  I get an error message that says: 'Time Machine could not complete the backup "Time Machine backup disk. Full backup impossible. An error occurred during the creation of the backup folder. »

  I followed the instructions in the Time Machine error - backup failed, but none of the steps solved my problem.

  I suggest that visit you Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.

• Time Machine could not complete the backup-backup drive is not found

  I get a message...

  "Time machine could not complete the backup to Time Capsule

  I can't find the backup disk. Make sure that the backup disk is connected, or select a different backup disk. »

  I have not had this problem before, it's all connected...

  If you have not already made a comprehensive network feeding cycle, it would be a good basic troubleshooting step.

  To turn off some appliances, you actually pull the plug on the appliance.

  Turn off all devices on your network, computers, routers, modem, printers, mobile devices, etc... in any order you want

  Wait a minute

  Turn on the modem and let it run for 2-3 minutes by itself

  Switch on the device connected to a modem and let run for a minute

  Keep turn on devices one at a time about a minute apart, until the entire network is back

  Try a backup

  Report on the results

• Time machine could not complete the backup of... The backup disk image could not be found (error (null))

  Running OS 10.11.3 on my early 2011 Macbook Pro 2.7 GHz Intel Core i7 with 4 GB 1333 MHz DDR3, use Time Machine to back up to my Airport 802.11ac purchased 16/09/2014:

  Backup failed: Time Machine could not complete the backup of... Airport Time Capsule.   The backup disk image ' / Volume/Data/MacBookPro.sparsebundle ' could not be found (error (null)).   Last successful backup: yesterday at 12:17

  I can see the airport and the data file in my network.

  I immediately did a full time Machine backup on a USB key and it disconnected from my system.

  I unplugged the airport, let it rest for a minute and returned the power plug, let it settle for a green light.  I'm restarting Time Machine backup to the airport.

  I need to replace the airport?  The appliance starts to fail?  Or, it is more likely is a problem with winter static electricity that has damaged the image and reconstruction will fix all this.  Reconstruction will take about four hours with no guarantee that it will work.

  Please see #C17 in this document great support... http://pondini.org/TM/troubleshooting.html

• Copy the old Time Machine files to the new disk TM

  Sorry people, I have to ask two (related) questions:

  (1) I have a WD My Passport for Mac drive connected to an Airport Extreme and 2 Macs use for backup via Time Machine. Now, the disk is full. I bought a WD My Book for Mac drive with a capacity of 4 TB and am ready to go.

  Question: can I copy the old files of Time Machine on my new book?

  (2) until now 2 different Macs used the My Passport as a Time Machine drive with no problems.

  Question: Should I partition the new drive (My Book) and every Mac uses its own partition as Time Machine or can proceed us as is?

  Thank you very much for your help!

  Question: can I copy the old files of Time Machine on my new book?

  Yes you can, but there is a lot of work, a little complicated, time consuming and not worth the effort for most users.  The main reasons for this are...

  (1) the older backups will take a good amount of space on the new drive, limiting the space on the disk again.

  (2) Time Machine backups for the old files will continue... it will make a new copy of every Mac and then go forward again with incremental backups.

  A better plan would be to keep the old drive on hand for a few months, in which case you need to go back and look for a file. After a few months, you will have a beautiful story from backup to the new hard drive and no need of older backups so you can remove the old disk and keep around as a spare part or use it for other purposes.

  Question: Should I partition the new drive (My Book) and every Mac uses its own partition as Time Machine or can proceed us as is?

  While you can partition the drive and save each Mac to a separate partition if you wish, there is really no need to do this since Time Machine will automatically create separate for each Mac backup files.

• I am very new to dream. I created a simple site that worked very well. I tried SEO booster and was checking on things different (for example Goigle webmaster). I don't know exactly what I did, but now when I type in my site it says the Palestinian Authori

  I am very new to dream. I created a simple site that worked very well. I tried SEO booster and was checking on things different (for example Goigle webmaster). I don't know exactly what I did, but now when I type in my site it tells me that the page cannot be opened because it was redirected too many times...? Help, please!

  Let me add some details to the choice in the scenarios you have for the use of domains.

  The areas are to simplify all kinds of activities on the Internet for users. Instead of addressing your email to go to the software from e-mail server to a computer with the IP 113.78.59.238 number, users can simply run their mail to "hannah" @ "gmail.com" or go to the website to "gildedgraces.com". This makes things a lot easier for users, but requires a little more difficult techniques backstage, because Internet computers connected and hardware (servers, tablets, phones, refrigerators) have only single numbers, not names. So, how internet needs to know which computer manages all emails for "@gildedgraces.com", and where physically this site 'www.gildedgraces.com '? This is where the "Domain Name Servers" kick in. They maintain long lists of these domain names, with references to the IP numbers correct and up-to-date. In this way, technicians can also easily Exchange computers, servers, connections, where a site is moved to another host, or when a server suddenly collapses. These things will happen, things have to change. They want to update certain IP numbers in the list on the DNS servers. I have it?

  So in order to get a Web site running, you know where your domain registry database is guarded and kept safe, and where your Web site is physically located.

  Note the difference between DNS (or servers) and the service (or Web servers) throughout all the instructions and documentation.

  Now, have a look at this PDF that was returned by Brad, in his response above.

  The domain name can be registered at any domain provider and the registry itself is not always need to reside there. You could relegate (you might say "move" or move) the registry for the DNS to another provider (like BC) service. In such a scenario, he must tell the provider holding the credentials of your registry, to redelegate it in British Colombia. That's what the article 4 in the PDF file. And of course, BC DNS service can internally so all applications for this field to their own web server.

  You can also choose to keep your current domain provider maintains the registry, but that their DNS servers before any request of this area on the web servers of British Colombia, where your site is published. This is typically a necessity for registrations from non-American, since many extensions of national domains (such as .nl and .de) can be recorded by suppliers outside of this nation. So the registry simply cannot be moved to an American company (it's a legal thing). In such a situation, article 6 of the PDF comes into play, describing what BC would normally internally: to the domains of the physical location of the Web site.

• Windows 7 64 bit worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  Hello Hans,.

  Thanks for choosing Microsoft Community!

  According to the description of the problem, you have problems when you use the backup on Windows 8 feature.

  Please answer these questions to better understand the issue and help you:

  1. are - what you're talking to backup and restore functionality on Windows 7?

  2 have you made any changes to the computer before the show?

  It is perhaps to cause bad sectors on the hard drive, run the disk check to repair bad sectors

  Check your hard drive for errors:

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information:

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.