Time machine automatically upwards a WD passport when its plugged into the machine of time rather than the macbook?
I have a Macbook Pro with a WD passport for mac that I keep all my photos on. I know that time machine will back up there if I plug it into the mac and select it to be excluded from the United Nations through the time machine preferences, which I did, but I generally keep the Passport plugged into the time machine itself and use wireless.
However, I don't really know if time machine is it backs up this way, or if it's just a wireless router that allows me to access the Passport.
How will I know if it is saved? And if not, how can I save it while it is plugged into the time machine?
Unfortunately, it seems as if you are confused about the terms of Time Machine and Time Capsule.
Time Machine is a software on your Mac, which is used to back up your Mac hard disk... like a Time Capsule
A Time Capsule is material... more precisely a wireless router with a built-in hard drive that can be used to store backups Time Machine .
With this information in mind, can clarify you what it is you want to do?
Turn off the music when I plug speake / headphones cord. Have to unplug to get the music to play again.
Have you ever force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data, but it can cure a few glitches.
Usually the music stops if you unplug the headphones to the device, and you have to press 'play' again to keep listening via the external speaker.
If you use the external speaker and plug in the headphones, the song doesn't stop and continues to play through headphones. Just tried it with my camera.
I have a question maybe?
How can I audit end user when they connect to the database by technical user in client/server environment.
I want to know who is?
Then you need id'ing to the application level. Fortunately, Oracle supports these (technical) applications.
For example, CLIENT_IDENTIFIER seems potentially useful.
Doc example links:
I have connected my passport mass storage device to a USB port and it notifies as new hardware, but it did not show in my computer anywhere. However, I installed and uninstalled several times my computer.
1. what happens when you plug the device to your computer, you get an error message?
2. don't you make changes to the computer until the problem occurred?
I suggest you try the steps mentioned below and check if it helps.
Try to connect the Passport mass storage device into the other USB port or try to connect the Passport mass storage device in another computer and verify that the problem persists.
Method 2: Try running the Fixit tool from the link below.
Hardware devices do not work or are not detected in Windows:
Method 3: Also try to follow the steps from the link below.
A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196
Hope this information is useful.
When buying individual images rather than a subscription, is it possible to buy images in a library at the same time, rather than just one at a time?
Unfortunately not - it must be done one at a time.
WiFi becomes quick and reliable whne the memory stick is disconnected. Always reproducible. Does not occur when the memory stick is plugged into the USB port on the left. Also has anyone seen this behavior?
Wireless network adapter Qualcom Atheros QCA61x4 with the version of the driver 220.127.116.11 dated 03-2016-21.
The explanation is simple. I'm sure that the memory stick is a USB 3.0, a plugged in a USB 3.0 port. The problem is that all USB 3.0 devices generate a 2.4 Ghz interference, as it generates interference on the frequency working on wireless. The solution is to connect the player to another port or to spend the 5 GHz wifi if your router supports. The wifi antenna is probably very close to the port and to the USB key.
This is known for a long time, and has nothing to do with the laptop.
There is an article on the Web page of intel who described the problem more technically. You can search if you wish.
This causes a problem also with a wireless mouse, if the receiver is connected next to a USB 3.0 stick or any other device.
Original title: BAD USB
I have an Acer netbook. I was able to download my photos from my computer on a USB key until a few days ago. When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive? Why does it say this?
I am confused with this... I really hope someone can help me.
Thank you for your time in doing
· Have you tried to connect to a different USB port?
Method 1: Try to connect the USB key to a different port on the netbook and check the issue. You can also connect the drive to another computer and see if the problem persists.
Method 2: Update of the netbook with the latest chipset drivers. In addition, install other updates of the device driver. Log in the Web site of the manufacturer to do the same thing.
Method 3: This problem can also occur if there is a drive letter conflict. A drive letter conflict occurs if the disk that is affected by the error is mapped to a reserved drive letter. I suggest you try to change the drive letter.
HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter
The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).
(1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.
(2) I tried to change the power adapter too.
The problem is that it is.
Your advice is very much appreciated.
Thank you best regards &,.
Welcome and thanks for posting your question on the Forum of Support HP
It seems that you are not able to turn on the laptop and tried to solve the problem
Please perform steps listed to find out if it is a hardware or software problem below:
1. remove all cables and devices, disconnect them and try to turn on the device
2. check the LED light situation and ensure the action of the spring button / stop is normal
3 Exchange with a well known power cord and the AC adapter
4 Pack no adapters are available, check if the power adaptor is slightly warm
Note: This will give us an indication that the power adapter could be good
5. do you know if the laptop was in battery or power adapter when you used the last time
Note: Make sure that there is no spill of liquid or cutting
6. check if the Port of the AC adaptor is loose/broken
Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit
Hope this helps for other queries to answer the post and feel free to join us again
* Click on the star of CONGRATULATIONS on the left to say thank you *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
K N R K
I work on behalf of HP
It is a very new problem for me. I had the iPad the same docking for the months and not had a problem. But now when I plug in, the iPad now tells me in the upper corner is it 'not supported' y at - it something I can do to fix this?
There seems to be something that is changed with iOS modified 10 power requirements for the load.
No idea when or if things will change, so all users can make use of the work load by plugging into the wall.
I have an ipod touch that needs to be picked up by itunes. When I plug into a wall outlet, it lights up and told you to connect to itunes, but it not turn on when I plug it into my computer.
I have an ipod touch that needs to be picked up by itunes. When I plug into a wall outlet, it lights up and told you to connect to itunes, but it not turn on when I plug it into my computer. Or my computer will recognize any device connected to the usb port. I tried another ipod to check the usb ports work and they are. Ive run out of ideas. help please
Check with iPod Support and Forums for more information if necessary.
iTunes and iPod Support
Each iPod - iPod help & Technical Support (part 3)
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Anyone know if it is possible to create a pulse square with its dependent on the frequency at the time rather than the sampling frequency and size?
for example if I set the frequency to 10. That means 10 pulses per second.
rather than having to set the sampling rate and use the equation
frequency = [(# of cycles) * (sampling frequency)] / sample size
Thanks in advance. a photo of the block diagram would be grateful if possible
NVM, that I solved it
I have no sound on my computer, I have a Toshiba laptop and I don't have external speakers. He says he works very well when I go into the properties, but there is no sound in any programoriginal title: no sound
Try to run the tool:
See if she could detect any problem.
Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.
As you have a laptop, better make this laptop in the computer Forum post here:
Tip: when you post a message, preferable to always include the computer model.
phone was low load and I let it run out, but when I plugged in the charger all that I get is a blank screen and flashing light. How he goes again please.
Have you tried to remove and reinsert the battery while your device is connected to a charger? If not try and see if it blinks.
I just got my new BB bold 9900. Has updated the OS to v7.1.714. Now I see not a helmet on the homescreen icon when I plug the headphones of BB. Although I get sound when I plug from the 3.5 mm plug.
Another issue is when I receive a call I am not able to hear the call, ringing on the headset, rather that I hear from the speaker as I would when no headset is plugged.
I heard that it is a common problem when an upgrade of the OS is made. Is there a solution? Help, please!
Welcome to the BlackBerry support community.
Thank you for your question about the helmet on the BlackBerry 7.1 software feature.
The headphones icon should only appear in within the phone application and not on the home screen when connected and on a call.
The ringtone will also go through the speakers of the device and not on taking 3.5 mm connected headphones. This is normal.
Maybe you are looking for
Hello. I have a little problem,I have the game of simulation of tractor and I'll start the following error message: Error: Not impossible not init 3D System.Shader 2.0 model is necessaryPlease install the latest video drivers. I install some drivers
I tried to install the NeatDesk scanner today. A message appears saying that it is not compatible with Windows XP and if I don't get software compatible with the seller, my computer can be damaged, now or in the future. How is risky to move forward?
Hello, I am trying to use my DVD / drive of CD-ROM, but it does not. In the administration of devices, I received the following notification in HL-DT-ST DVDRAM GT20L ATA Device: Windows cannot start this hardware device because its information of con
I'm trying to insert a 186 MB video into a website that accepts only videos of 2 MB. Is it possible to do this somehow?
Windows Defender does not work on my pc with vista. I am unable to turn on because it shows the error by clicking turn on. is it necessary to activate for the bases of security of microsoft (anti virus) to work? Help, please