Time Machine can't see the 2nd Logical Volume

Similar Questions

• Time Machine can't see my passport

  I use OS x captain and time machine can't see my passport.  It is a new issue as it worked yesterday.  Is it possible to add a link to it?

  The WD passport seems to be very reliable. Or with TM.

  I see several complaints here with this kind of question. Try connecting to a different USB port. I guess it is plugged directly into your computer?

  No chance get a disk with disk utility repair... Although disk in El Capo utility is a shadow of his old self useful.

  People even load the version of Yosemite in El Crapo.

  https://Justus.Berlin/2015/10/restore-old-disk-utility-in-OS-x-El-Capitan/

• Time Machine can't see NAS to format / partitioned in El Capitan

  We have two MacBook Pro and 4 car TB WD MyBook attached to our wireless router. This disk is partitioned and used for Time Machine backups. We did not have problems with this configuration, up to yesterday, that we decided to format the disk and repartition it. We did it with my MacBook Pro which is running El Capitan (10.11.3) and the newer disk utility program. I plugged the drive locally on the laptop and he came back and said that through fine form/partitioning layout. However, I moved to the router as a NAS and went to setup Time Machine... Time Machine could not see the player. I could map the drive and write to her through 'connect to server... ". "without any problem. Even tried the thing to "map the drive on the desktop" to make it appear on the list of drives available in Time Machine. Nothing worked! I thought something may had been bad installation, or gone bad, partitioning and started... always the same results. The third time, I decided to use MacBook Pro my wife who still works Yosemite with the old "Disk Utility" program on this subject. I went through and formatted/partitioned it the same as before. However, when I hooked up like the SIN this time and the mapped drive he appeared right on Time Machine just as it should have the first time.

  Is there a problem with Time Machine, find readers NAS to format / partitioned in El Capitan? Is there a setting that needs to be changed in the new "Disk Utility" program to make it work? I'm a bit of a loss here...

  The router cannot possibly recognize a drive formatted by OS X. It uses an operating system that is totally foreign.

  A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine, especially if it's your only backup. I know that's not what you want to hear. I know that Time Machine accepts the device as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you are trying to restore and find that you can't.

  Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification. They all use the application of Netatalk incomplete, obsolete Apple Filing Protocol.

  Apple does not endorse any device third-party network for use with Time Machine. See this support article.

  Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

  Otherwise, use Time Machine at all. There are other ways to save, although none of them are nowhere near as effective or as well integrated with OS X. I don't have a specific recommendation.

  If you are determined to continue to use the device with Time Machine, your only remedy for any resulting problem is the manufacturer (who will blame Apple, neither you nor anyone else but herself.)

• Time machine does not see the existing backups

  When I tried to make a backup of TM to my doesn.t TM HD external see my existing backups and trying to do a new backup complete. Firstly, it said "preparing backup..." "that takes a long time before you go make a new backup full not not using the existing to make a differential.

  You're talking about two different things that above:

  • Create a new full backup
  • Recognizing the existence of previous backups

  You seem to be assuming that because Time Machine seems to be to create a new full backup, so should not recognize the existence of all the previous backups.  This assumption is wrong.  New full backups are created, for example, when the update of OS X.

  The way to check if the Time Machine recognizes the previous backups would be to use the Time Machine application to check if you can see previous versions of files.

• Can not see the 2nd partition on the computer after using the shrink volume option

  I had 2 partitions on the hard disk the same... but after separate 60 GB unallocated space of 2nd partition (drive D) and after rebooting I don't see my 2nd partition. After that I tried to change the drive letter and path, but it displays the following message 'the operation did not complete because the disk management console view is not updated. Refresh the view by using the refresh task. "If the problem persists close the disk management console, then restart disk or restart the calculation Managerr. I don't want to lose the data.

  Hello

  ·         Have you installed a third-party program like Partition magic on the computer?

  Try these methods further and check if it helps:

  Method 1:

  Try to use diskpart to assign a drive letter to the disk #0 Partition #1.

  (a) click Start Orb > type diskpart

  (b) click right diskpart in the above results > click run as administrator right

  (c) once diskpart load type list volume, press enter

  You should notice that you can see your partition you use for your data, it should not not have a drive letter assigned to it.

  (d) type select volume 6 (replace 6 with the number of the volume assigned to the partition in question)

  (e) type assign letter Z (replace Z with the letter you want to assign)

  When you look in the computer, you should be able to see your score.

  Method 2:

   

  I also suggest that you run the Microsoft fixit tool and check if that helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:

  You can follow the steps in troubleshooting section below and check if it helps:

  http://support.Microsoft.com/kb/2001877

• Created in Esxi virtual MACHINE can't see the network

  Hello

  I installed Esxi 5.5 and I have no problem to access and create a virtual machine.

  However, the virtual machine, which is 2012 Windows, does not begin with a network adapter.

  When I check the configuration of the VM, the network adapter is connected, turned on, E1000E but says directpath e/s is not supported. I don't have VMware tools installed in the virtual machine.

  I don't understand where the problem lies. I connect to Esxi ok. I can run the virtual machine in Esxi client ok, but the images says that there is no network.

  I created the VM Windows before 2012, outside of Esxi and the network built in card is detected ok.

  STOP PRESS - in computer management Windows, peripheral, the Ethernet controller is not recognized. So, how can I get the virtual machine to recognize when it is running in ESXI?

  Help?

  Thank you

  Jason

  Also can you check with adapter VMXNET or tru uninstalling and reinstalling VMware tools.

  -f10

  http://highoncloud.blogspot.in

  Virtualization VMware on NetApp

• Can I partition my drive Time Machine to back up the other 2 drives?

  Is it possible to partition a hard drive and use it with Time Machine to back up the other 2 drives?

  Example: I want to save internal drive of my iMac and my external storage drive, and I wonder if I can partition a hard drive for use with Time Machine, in order to safeguard my internal drive on one partition and the external drive to another partition. Hope that makes sense.

  Yes, if it's not a time Capsule, but I wouldn't recommend it. I would use readers separated for each device you want to back up. If you put all one hard drive and this player goes down, then you have lost all your backups. With separate if backup fails a drive you will always have backups remaining intact.

• I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture. How can I fix it?

  I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture.

  How can I fix it? Someone please help

  Hello

  What operating system do you use?

  If you are using windows 7, I suggest you to follow the link and set the picture on the screen of the link fill and check.

  Make changes to your desktop wallpaper slideshow

  http://Windows.Microsoft.com/en-us/Windows7/make-changes-to-your-desktop-background-slide-show

• new time machine snapshots copied to the old directory of the machine not recognized

  I had a time Capsule 2 TB which showered, and I started a new backup (a USB key) by mode Apple drive. It took me a while to return to deal with the old clichés left on my Time Capsule. I found nothing specific online to tell me how to deal with this, so I made a few decisions naïve. I've disabled the Time Machine, renamed my new store backup and copied over the old store backup on the new backup drive time Capsule. Then in a Terminal on the command line, I mvhad snapshot directories in the newly copied backup of the old backup store store renamed folder. NOTE: On this site, I learned about a Time Machine of assistance called bypasscommand, and I needed to use it to move the Flash files in the command line:

  $ sudo mv 2016-09-17-211302 /System/Library/Extensions/TMSafetyNet.kext/Contents/Helpers/bypass.

  .. /.. /Backups.BackupDB/MyMachine /

  At this point, I thought: well, now, I have all my old and new pictures in the active backup store on the local USB drive. Then I turned on the Time Machine, and the first backup failed:

  "An error occurred during the file copying. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk. »

  Then I noticed that Finder shows only most original snapshots while in the Terminal, I see all snapshots using the ls command. All snapshots have the same names in fashion and the owner/group permissions. So, why don't Finder shows all snapshots and why is Time Machine unhappy?

  Given that I can't modify my own * post, here are the corrections and updates of the original:

  I had a time Capsule 2 TB which showered, and I started a new backup (a USB key) by mode Apple drive. It took me a while to return to deal with the old clichés left on my Time Capsule. I found nothing specific online to tell me how to deal with this, so I made a few decisions naïve. I've disabled the Time Machine, renamed my new store backup and copied over the old store backup on the new backup drive time Capsule. Then in a Terminal on the command line, I mvhad snapshot directories in the newly copied backup of the old backup store store renamed folder. NOTE: On this site, I learned about a Time Machine called command help work around, and I needed to use it to move the Flash files in the command line:

  $ sudo mv 2016-09-17-211302 /System/Library/Extensions/TMSafetyNet.kext/Contents/Helpers/bypass.

  .. /.. /Backups.BackupDB/MyMachine/

  At this point, I thought: well, now, I have all my old and new pictures in the active backup store on the local USB drive. Then I turned on the Time Machine, and the first backup failed:

  "An error occurred during the file copying. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk. »

  Then I noticed that Finder shows only most original snapshots while in the Terminal, I see all snapshots using the ls command. All snapshots have the same names in fashion and the owner/group permissions.

  Then, I thought that the Finder was confused somehow. I turned off Time machine and ejected from the USB drive. When I plugged back it it, of course now Finder shows all snapshots. The tmutil listbackups command confirms also all snapshots. I started a new backup, but it has not yet.

• Time machine could not complete the backup of... The backup disk image could not be found (error (null))

  Running OS 10.11.3 on my early 2011 Macbook Pro 2.7 GHz Intel Core i7 with 4 GB 1333 MHz DDR3, use Time Machine to back up to my Airport 802.11ac purchased 16/09/2014:

  Backup failed: Time Machine could not complete the backup of... Airport Time Capsule.   The backup disk image ' / Volume/Data/MacBookPro.sparsebundle ' could not be found (error (null)).   Last successful backup: yesterday at 12:17

  I can see the airport and the data file in my network.

  I immediately did a full time Machine backup on a USB key and it disconnected from my system.

  I unplugged the airport, let it rest for a minute and returned the power plug, let it settle for a green light.  I'm restarting Time Machine backup to the airport.

  I need to replace the airport?  The appliance starts to fail?  Or, it is more likely is a problem with winter static electricity that has damaged the image and reconstruction will fix all this.  Reconstruction will take about four hours with no guarantee that it will work.

  Please see #C17 in this document great support... http://pondini.org/TM/troubleshooting.html

• Time Machine restore, most of the alias icons are broken?

  I recently restored the system of Time Machine, but my alias (for most) have broken images.  If I copy the aliases, they are all fixed, but I can't do it exactly for each alias on the machine!  Restoration of the alias of Time Machine seems to have the same effect.

  Is it possible for the shot to solve this problem?

  I tried several solutions, compensation resolved cache:

  Deploy sudo rm - rf / *.

  sudo rm - rf ~/Library/Caches/*

  Reset

  If I had known what specific cache which is held the icon broken, images that would have been better.  It turns out that only some of the specific sizes were broken, which explains why the icons seem to appear and then disappear again on another page.

• Backup Restore Time Machine does not see RAID external drive

  Hi all

  I have a problem with my iMac restore from a Time Machine backup, and I was wondering if anyone else had the same problem already.

  I had to reinstall OS X El Capitan from scratch, based on education, I received Support from Apple. That worked without problems and my iMac works fine. However, I wanted to restore it to how it was before, using Time Machine. I keep my backups on a LaCie 5big Thunderbolt 2 and never had any problems with it.

  To restore the system, I followed the instructions on the Support page. I restarted my system in recovery mode and selected the "restore from Time Machine backup". Unfortunately the LaCie 5big does not appear on the list of drives, so I'm stuck... When you use the system in normal mode, the external RAID is visible and Time Machine stores backups on it without any problem.

  Any of you are familiar with this problem? I would be very grateful if you could help me with this problem!

  Kind regards

  Valerio

  Hello

  -While the system is booted in recovery mode, confirm that the Lacie 5big network is visible in disk utility.   You will need to disconnect / reconnect the Thunderbolt cable to the Lacie 5big be detected.

  -Once seen, a new attempt to restore from Time Machine backup.

  See you soon

• updated to 38.2.0 and now I can't see the messages. I don't see the list of folders in the left pane.

  I only see the list of folders in the left pane, but the messages are not displayed. It receives without problem, I can't see the emails.

  pscolnik,

  You were usng the lightning/calendar addon in time. Are you still using it?

• Time Machine wants to finish the backup

  I recently had a repair on my MacBook Pro.  They replaced the Logic Board 2.5 GHz.  Time Machine now wants to do a full backup instead of only since my last backup.  Should I just let a backup completes or is there a way to backup only since the last of them?  Will allowing him to make a full backup take too much space on my external hard drive?  The drive is fairly new and I know that there is enough space (for now.)  Apple advice for troubleshooting time Machine said to call the repair center, but I thought someone here might be able to help.  Thank you.

  This is quite normal. Time Machine it's an another computer because the new logic board. So, you have to make a new backup. If you have no space on the backup drive, then erase the disc first.

• Time machine can finish no backup on airport time capsule

  Time machine can finish no backup on airport time capsule.

  explanation: there is no access to the/volumes/data-1/macbook diskcopiefile xxxx.sparsebundle that is used to back-up pro (error (null))

  The network failed to halfway through the backup.

  To resolve this problem, we need to know your complete network type.

  This modem do you have? Brand and model please.

  Who is your ISP? It is important for the IPv6 configuration.

  What model is the TC?

  What the configuration of TC in the network?

  How old is the MBP? If you have an ethernet port that you use it instead of wireless?

  Is this a first backup? Or were you works well for awhile and it's broken now?