Time Machine could not complete the backup

Similar Questions

• Time Machine could not complete the backup-backup drive is not found

  I get a message...

  "Time machine could not complete the backup to Time Capsule

  I can't find the backup disk. Make sure that the backup disk is connected, or select a different backup disk. »

  I have not had this problem before, it's all connected...

  If you have not already made a comprehensive network feeding cycle, it would be a good basic troubleshooting step.

  To turn off some appliances, you actually pull the plug on the appliance.

  Turn off all devices on your network, computers, routers, modem, printers, mobile devices, etc... in any order you want

  Wait a minute

  Turn on the modem and let it run for 2-3 minutes by itself

  Switch on the device connected to a modem and let run for a minute

  Keep turn on devices one at a time about a minute apart, until the entire network is back

  Try a backup

  Report on the results

• Time machine could not complete the backup of... The backup disk image could not be found (error (null))

  Running OS 10.11.3 on my early 2011 Macbook Pro 2.7 GHz Intel Core i7 with 4 GB 1333 MHz DDR3, use Time Machine to back up to my Airport 802.11ac purchased 16/09/2014:

  Backup failed: Time Machine could not complete the backup of... Airport Time Capsule.   The backup disk image ' / Volume/Data/MacBookPro.sparsebundle ' could not be found (error (null)).   Last successful backup: yesterday at 12:17

  I can see the airport and the data file in my network.

  I immediately did a full time Machine backup on a USB key and it disconnected from my system.

  I unplugged the airport, let it rest for a minute and returned the power plug, let it settle for a green light.  I'm restarting Time Machine backup to the airport.

  I need to replace the airport?  The appliance starts to fail?  Or, it is more likely is a problem with winter static electricity that has damaged the image and reconstruction will fix all this.  Reconstruction will take about four hours with no guarantee that it will work.

  Please see #C17 in this document great support... http://pondini.org/TM/troubleshooting.html

• Time Machine does not recognize the backups when you configure the external drive as a network drive

  I have a MyBook 5 to disk with a 1 TB partition that I used as a destination for Time Machine > 1 year now. I recently gathered the energy to connect the my book on my Airport Extreme Base Station (model 2014? the second model) to implement wireless backups. I plugged the MyBook on the base station, set up file sharing in AirPort Utility and created an account with access to the partition of TM on the MyBook under the section 'Sharing secured disk' utility.

  Now, when I open the time Machine, I choose this partition, but it does not seem to recognize that I have a string of backups already there. Then he tries to start a new backup. So a few questions.

  1. Should I abandon my old backups and start over? I don't think that I did nothing to my system in these last days that I would need to be careful, if I couldn't rely on a TM backup from that moment.
  2. Is there a way to get TM to recognize my old backups and start from there? I do not look down the barrel of a backup of time + 13.

  If 1, should I reformat the partition TM in order to start over? I don't see the older backups on disk when I look in the Finder, but I know that they are there and they are too much space. Help/suggestions appreciated!

  Inherit from a backup

  Inherit from a backup (2)

• Could not complete the backup - error 0 x 80080005

  When I try to set up the backup I get "the application of backup could not start due to an internal error: Server execution failed (0 x 80080005).»

  original title: 0 x 80080005

  Hello?  Did someone at Ms tuned?  This answer does not work.  Now I'm up to 12 hours on the phone with MS in India and Texas... Have reinstalled the operating system.  Have downloaded several log files.

  Summary: it may not be one solution other than a clean reinstall of the operating system and all applications.  Ugh.

  Update - June 25, 2011: spent another six hours on the phone with MS: FIXED!  Solution: manually set all permissions in the "System Volume Information" to the SYSTEM.  You must do so separately each item in the folder. If you miss one, the backup will fail.

  Update - July 15, 2011: worked well for 10 times now.  No problem and can also restore.

• Why Time Machine will not erase old backups when it needs more space for a new backup?

  I have problems with Time Machine.  I am running on an iMac (21.5 inch, end 2012) with a processor Intel Core i7 3.1 GHz and 16 GB 1600 MHz DDR3 memory.  My OS is El Capitan, 10.11.3 version (15 d 21).

  Since a few days I received the following Time machine error message:

  Time Machine could not complete the backup "IoSafe.

  Backup disc neds 47,49 GB for backup, but only 39,98 GB are available.  Select a larger drive for backup or do

  the smaller by excluding the backup files.

  I thought that Time Machine was supposed to automatically delete older backups when there was not enough space on the backup drive.  Am I missing something?  Is that what I can do to diagnose the underlying problem?

  -Is [Larry] is-

  When you enter Time Machine, you see windows cascading over time. The foreground window represents the current state of the data and those behind it successive snapshots of data taken by Time Machine. Is there only a snapshot (i.e. one behind the windshield), or more than one?

• Time capsule will not recognize the backup from another mac

  Time machine will not recognize the backup from another mac

  Time Machine will never find "another" Mac backups unless you've been backup that 'different' Mac on the same Capsule you have there.

  So, we need more information and to try to understand what it is that you are trying to accomplish. Please assume that we know nothing about what you could have done in the past... (since we don't have).

• Don't throw Illustrator CC 2014 (could not complete the requested operation) even after the new installation (3 times), someone knows how to solve? (Windows 8.1)

  Hi guys, my CC 2014 Illustrator won't launch, receive an error message 'Could not complete the requested operation', this isn't a problem of specific files, I can't launch independent Illustrator.  I have uninstalled and reinstalled 3 times and contacted support, but they were not able to solve at the moment.  This is a relatively new 8.1 windows installation and none of the custom fonts have been added.  I tried to delete the preferences and launch files and which had no effect.  No idea what I can do, any help would be greatly appreciated.

  Edit: Forgot to mention that I also tried running Illustrator as an administrator and that Illustrator worked perfectly on this computer from the installation (about 2 weeks) before this started happening.

  Thank you

  Chris

  

  baglosh,

  You reinstall using the way complete three steps (the otherwise strange things may persist)?

  (Check the box to delete the preferences), run the clean uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Storage migration fails with the error: could not complete the network copy to path to the file

  Hello

  I have two hosts ESXi 5.5 with local storage and VMware vCenter device which manage them. Everything worked well until that time.

  Now when I try to make the host migration and storage, processing or power off the virtual machine, I get the error message:

  Could not complete the network for file /vmfs/volumes/.../path/to/file.vmdk copy

  The situation is the same when I try to deploy VM on ESXi-2 model that is on ESXi-1.

  All with the network configuration is correct. I have ping between the hosts on ESXi and ESXi and vCenter. No firewall hosts ESXi and vcenter. No physical firewall between hosts.

  The network latency is less than 1 ms. No packet loss.

  I read this VMware KB article: Storage migration fails with the error: could not complete network file copy and I tried solutions explained here, but the results are the same.

  You have ideas where the problem may be?

  Hello guys,.

  I finally found the problem.

  ESXi servers are configured with MTU 9000, but the switch where the hosts are connected was a bug documented with frames. I found the problem after finding this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003734

  I run the command of ESXi-1:

  vmkping - d-s 8972 192.168.10.12 where 192.168.10.12 is the ip address of ESXi-2

  The result was:

  3 packets transmitted, 0 packets received, 100% packet loss

  as a workaround, I reduce the MTU to 1500, then I patched the problematic switch.

• HDR Pro - "could not complete the command because of a program error"

  Select some photos in Lightroom CC, right click, "Edit In" > «Merge to HDR Pro in Photoshop...» ». Select 32-bit Mode, 'Tone in ACR', and... "Could not complete the command because of a program error". Every time. No indication of any other details (outside this wonderfully detailed error message). HDR work in 16 Bit Mode, but I prefer to work in 32 bits, for obvious reasons. The combination of three. Files CR2 to a Canon 50 d, which I did successfully many times, as recently as a couple of weeks.

  Attempt to use:

  Uninstall/reinstall full of PS.

  -Reset the PS preferences.

  -bodies "killall node" (a little Voodoo).

  -Hold on a leg (certainly Voodoo) monkey.

  Technical details:

  -PS: 2015.1.2

  -CAB: 9.5.0.585

  -LR: 2015.5

  -OS X El Capitan, 10.11.1

  -MBP 15 "retina, mid-2015

  Help, please?

  Recent error log:

  2016:03:28 21:55:07: follow-up of the main 0000000000001DA0 of type P5_ARef not found: 1: REQUEST failed

  2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

  2016:03:28 21:55:07: follow-up of the main 0000000000001FA0 of type P5_ARef not found: 1: REQUEST failed

  2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

  2016:03:28 21:55:07: caterpillars type 0000000000002918 P5_ADsc key not found: 1: REQUEST failed

  2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

  2016:03:28 21:55:07: caterpillars type 0000000000002910 P5_ADsc key not found: 1: REQUEST failed

  2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

  2016:03:28 21:55:07: caterpillars type 0000000000002720 P5_ADsc key not found: 1: REQUEST failed

  2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

  2016:03:28 21:55:07: caterpillars type 0000000000002718 P5_ADsc key not found: 1: REQUEST failed

  2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

  2016:03:28 21:55:07: tracking key 8 type 00000000000026D not found P5_ADsc: 1: REQUEST failed

  2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

  It is a problem with the Camera Raw plugin 9.5.  Until that a fix is released, the solution is to roll back to ACR 9.4 unless you have a camera that requires a 9.5 ACR.  Use the installer from 9.4 to roll back:

  https://helpx.Adobe.com/camera-raw/KB/camera-raw-plug-in-installer.html

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• Windows could not complete the installation - Message in Vista 32

  Windows could not complete the installation. To install windows on this computer, run the Setup again.

  I get this message when I switch on my compaq CQ40 with Vista 32. From this screen, I can go into Manager tasks and go online, see the program files on the C: drive, change passwords, etc. Anything except support Vista. I just downloaded and installed SP2 via the Task Manager. Always stops after the Welcome screen. Another thing I never noticed before: during the boot and just after opening orb, the Welcome to Windows message lights up with the small circle of progress, then I hear a sound of gong just before startup fails. Curious. Any help out there?

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• BitLocker: Could not complete the requested operation because of...

  Two days ago Windows 10 was running on my laptop. BitLocker has been on two disks (D and E). For some reason, I have formated Win 10 and do a new install of Windows 7 Ultimate. After installation, when I unlock the drive D, it works very well. But I can't unlock the E drive. When I enter the password, the message "Could not complete the requested operation due to a catastrophic media failure or corruption of data on the disk structure."
  I'm sure that the password is correct at 100%, but I do not have any file recovery. Can someone help me?

  Hi NooriSAN,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, you cannot unlock a drive locked by Bitlocker key and get error message: "Could not complete the requested operation due to a catastrophic media failure or corruption of data on the disk structure."

  This could be if defective media stored on database security, or a program in the security software error has caused corruption on disk.

  For reference I suggest you to return the items mentioned below.

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Overview of BitLocker Drive encryption

  What are the main issues for Bitlocker?

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Sysprep is not - Windows could not complete the installation

  Original title: Sysprep failed

  I started a sysprep on my windows7 pro computer restarts and says

  From Windows, it jumps to "Setup prepares your computer for first use.

  After 5 seconds an error occure

  / "Windows is unable to complete the installation. To install Windows on theis compuiter, re-run the installation. »

  I press Ok and it says installation continues after the reboot.

  and in this loop im stuck.

  Is it possible to do a new sysprep without getting the OS to start?

  Hello Simon,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  Your computer is connected to a domain network?

  Thank you for details on the issue.

  Preparation system (Sysprep) tool prepares an installation of Windows for duplication, auditing, and customer delivery. Duplication, also called imaging, allows to capture a customized Windows image that you can reuse throughout the organization. Audit mode allows you to add additional device drivers or applications to a Windows installation. After you install additional drivers and applications, you can test the integrity of the Windows installation. Sysprep also allows to prepare an image to be delivered to a customer. When the customer boots Windows, Windows Welcome starts.

  You can check the suggestions of MarkBeacom responded on 28 June 2012 and Mark l. Ferguson responded on November 3, 2009.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-could-not-complete-the-installation-to/bf09c3c5-298B-459F-AED5-4f431b8398f5

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows could not complete the installation.

  Hi, I use the windows 7 edition starter with ASUS Eee flare series.  This message appears when I do the system restore, "Windows could not complete the installation. To install windows on this computer, restart the installation.

  Hello

  Welcome to the Microsoft community.

  According to the description, it looks like you get the error, such as "Windows could not complete the installation" when you perform a system restore.

  However, we need more information about the issue to help you better.

  Please help me to answer these questions.

  Why you perform a restore of the system on the computer?

  Try this method and check:

  Method 1:

  Try to choose a different restore point and check.

  Method 2:

  Perform a startup repair

  Note: you can perform this step only if the mode of the Windows recovery environment is enabled on your computer by the manufacturer of the system (Acer). This mode allows you to use the recovery options.

  Click: Startup Repair

  Also check:

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-in/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Hope this information helps. If you have any additional questions with Windows do not hesitate to answer and we will be happy to help.