Time Machine for all users?

Similar Questions

• Error "have sufficient privileges to complete this installation for all users of the machine. "log on as an administrator and try again the installation" when you try to install iTunes

  Original title:

  I just installed windows7, I had to uninstall itunes in order to complete the instalation of windows7. everything went well until I tried to reinstall itunes.

  During this process, I get the message "you don't have sufficient privileges to complete this installation for all users of the machine. log on as an administrator and try this installation again. ». but I am logged on as administrator.

  Hello

  To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

  Method 1:

  Right click on the installer for iTunes and click Run as administrator.

  Method 2:

  Disable user account control settings and check.

  Enable or disable the User Account Control

  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. Disabling it can make your compromised computer. Please make sure that enable you UAC, once you have completed troubleshooting.

  Method 3:

  Allow the default Administrator and try to install it in this user account.

  a.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  b.Type in the following command and press ENTER.

  NET user administrator / active: yes

  c.Log disable the current user account and log in to the user called Administrator account.

  d.Install iTunes in this default Administrator account.

  e.Once of that installation is complete, the default administrator is disconnected.

  f. log in to your user account.

  g.Disable the default Administrator account. Follow these steps.

  i.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  II. type the following command and press ENTER.

  NET user administrator / active: No.

• How to set preferences of creation for all users - machine laboratory at the University?

  I'll put up for our University editing room which has a CC license "per machine". It is a PC facility. This machine will be used by a class of students who will register with their own credentials. I need to set preferences for the first (video output, default working space planning etc. discs) so that it is the same for all users connecting from us want a consistent configuration for educational purposes and not want to help every student to configure so that it displays correctly on monitors. Is there a way to save this default setting for each user?

  The most important of them is the preferences - reading to set up the second monitor.

  Post edited by: Bruce Cooke

  Just copy the files preference and workspace of your user folder.

  Mylenium

• Why Firefox 31 change all icons PDF and open in browser, require a fix by using REGEDIT to set for all USERS on a computer?

  The solution to use REGEDIT in the question linked below almost fixed my problem with PDF files on more than 30 computers with multiple users on each computer:
  https://support.Mozilla.org/en-us/questions/1013642

  But I need to fix for all users on a computer without logging on each account on each computer. My challenge was to log on as an administrator and change the following key of the overall system instead:

  HKEY_LOCAL_MACHINE\Software\Classes\.PDF

  Name: by default
  Type: Reg_SZ
  Data: FirefoxHtm

  Changed FirefoxHtm to AcroExch.Document.11 data

  I use Adobe Reader XI on Win7 Pro 64-bit machines.
  The problem started when I ran a file downloaded to install the new version of Firefox on computers.

  Why Firefox would require me to use REGEDIT in this way to solve the problem?

  This only happens when you set Firefox as the default browser and Firefox thinks that there is currently no application PDF file handles.

• Docking station by default for all users

  I would like to create a default dock that all users will have when they connect.

  So far on the administrator account, I installed the dock how I want it to look.

  I copied the \Library\Preferences\com.apple.dock.plist file, and then paste it in the system\library\User / Template\English.lproj file.

  This doesn't seem to work.

  I also tried to stick in system\library\User / Template\English.lproj\Library\Preferences

  That did not work.

  I also tried to stick in system\library\User / Template\English.lproj\Library\Application/ Support

  This no longer works.

  Any ideas?

  I remind you that you are on a UNIX machine and not Windoze. Stop putting human oblique zigzag in your paths - they lean forward under macOS. A slash (as you'll see below) is used to escape white space in a path name.

  In your local account, configure the applications you want for all users (including system preferences: Dock settings) in your Dock. Then apply the following copy command in the Terminal of your home directory (you will be asked your admin password).

  sudo cp ~/Library/Preferences/com.apple.dock.plist Template/English.lproj/Library/Preferences system/library/User\

• AddOns for all users

  I'm trying to deploy Firefox on my personal work machines.

  We use Windows 7 on them and want to be able to have available extensions for all users on this computer.

  However, after much research, it seems that all previous to this problem solutions have been limited or removed.

  There should be an easy way to have addOns installed for all users. It is not feasible to make each single user install each single addOn one by one.

  So while the links were good and everything worked, but I thought that it would take an easy source of step by step to get an addon to work for all users of a "dumbed down" version As a result I got an addOn to work for all users, there may be shortcuts here and there, but it worked for me.

  So here it is:

  1. first you need to download the '. '. XPI file"of the addOn. This is done by downloading using another browser (Internet explorer).

  2. Once downloaded, you must extract the contents of the "." XPI file"in a folder. I used WinZip to do this.

  3. go to the extracted files and you should see a file called 'install.rdf '. Open this file with WordPad.

  4 in this file is a Unique ID, specific to the addOn. It is normally at the top of the file. You can search the

   <Description about="urn:mozilla:install-manifest">
  

  and the next line after that it should be your ID in the form of:

   {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
  

  for example.

  5. with the help of this Unique ID, you must create a folder in the install directory of Mozilla Firefox called 'distribution' and a subfolder in that called "extensions" and a subfolder using the name of your Unique code.
  Example:

   C:\Program Files (x86)\Mozilla Firefox\distribution\extensions\{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
  

  In this case, you should empty your extracted contents of the "." XPI file.

  6. you must now tell Mozilla to look in these folders. To do this, you need to change the global preferences. This is done by going to:

   C:\Program Files (x86)\Mozilla Firefox\defaults\pref
  

  In this case, you should have 2 files:

   channel-prefs.js
   user.js
  

  If they do not exist, create them if you please.

  Inside of "channel - prefs.js" you need to put the following at the end of the file:

   pref("app.update.channel", "release");
   pref("extensions.enabledScopes", "0");
   user_pref("extensions.autoDisableScopes", 0);
  

  Inside the "user.js" you must put the following at the end of the file:

   user_pref("extensions.shownSelectionUI", true);
   user_pref("extensions.autoDisableScopes", 0);
  

  7, you're done! Your addOn should be activated automatically as soon as the user starts Firefox.

• Using Time Machine for subsequent backups

  I would like to know how can I use Time Machine for frequent backups after the initial. Specifically, I want to know how I can assure you that Time Machine DO backup files that have changed since the initial AND only the new backup files that have been added to the hard drive since the last backup?  In other words, Time Machine will do it automatically or it will save all the entire hard drive again?

  Time Machine which will automatically

  Yes.

• Can I install Firefox in a way that will never check an upgrade for all users?

  In the approximately 500 mV VDI environment I would like to disable checking of upgrades for users of all virtual machines. We cannot update Firefox until we have ensured that the new version works with specific tools. Virtual machines are linked clones that are being refreshed to their State before logon after users log off. This causes the popup to come upgrade whenever users connect. Users are not allowed to upgrade, then it is a nuisance that I would like to eliminate them.

  I found that I can use on: config to disable checking of upgrade on the image, where all virtual machines are created, but cela will not shut it for all users for the user with which the image is kept. Is there a central setting that allows me to do this? Or this would require a change in profile all users? And if the latter, what a change I need to make to their profile?

  Use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify default values.

  Place a local file - settings.js in the defaults\pref folder where you will also find the channel - prefs.js to specify using mozilla.cfg file.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0); // use this to disable the byte-shift
  

  See:

  • http://KB.mozillazine.org/Locking_preferences

  You can use these functions in mozilla.cfg:

  defaultPref();  // set new default value
  pref();         // set pref, but allow changes in current session
  lockPref();     // lock pref, disallow changes
  

  lockPref("app.update.enabled", false);

• Is it possible to have full control for all users in the directory/files/registry?

  Can I have a lot of control (read, write, change) my specific file / registry for all users, you have any program or script for this reason?

  as 'cacls '. Because I can't use cacls.

  is it wrong?

  C:\>Cacls "program * Files\NETAS" / c/r users: «F»»»

  Displays or modifies access control (ACL) of the files lists

  CACLS filename [/ t] [/ e] [/ c] [/G user: permission] [/R user [...]]
  [/P user: permission [...]] [/D user [...]]
  the ACL file name.
  / T changes ACLs of files specified in
  the current directory and all its subdirectories.
  /E Edit ACL instead of replace it.
  /C continue on access denied errors.
  /G user: permission Grant specified user access rights.
  Perm can be: R read
  W write
  C change (write)
  F full control
  ...

  Perhaps you could elaborate a little bit on "this command is not running"...  What happens when you try?

  I'm not knowledgeable about Windows 7, but Windows XP, I found the registry permissions must be put in a file.  So in your example, you can create a file named "z.txt", and in this file, you put the line:
  [1 5 7 17] \registry\Machine\Software
  Then call you the command line:
  Regini z.txt

  HTH,
  JW

• How to activate permanently on "Show processes for all users" in the Task Manager

  I have a facility with windows 7 installed twice.  will receive run the Task Manager in the initial installation of windows the "show processes from all users" is checked by default and visible.

  However, in the second installation on a spare drive will receive run that task manager this option is converted (boxed) and must be clicked but the machine doesn't remember this setting.

  How can I get windows 7 to continuously show me processes for all users?

  Thank you footoomsh

  Hello

  Are you logged on as ADMINISTRATOR?

  The Task Manager - create a shortcut high
  http://www.SevenForums.com/tutorials/10499-Task-Manager-create-elevated-shortcut.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to create a shortcut for all users during installation

  Hi people,

  We have a desktop application that is distributed with Java Webstart and works on Win7 machines. Initially, users all connected using a connection by default, so creating shortcuts was not a problem. Now, because of new networking strategies, each user has his own connection.

  The problem is that the shortcut to the application is created in the user profile (for example "C:\Users\JohnDoe\", so that other users in the same machine can not run the application unless he or she installs the application again.)

  Is there a way to create this shortcut for all users using JNLP API or configuration in the xml file?

  If anyone has need of the solution: during installation I save the jnlp file in a directory accessible to all the world and then start the application using "javaws path\to\file.jnlp". More details in How to create a shortcut for java webstart available for all users on Windows 7?-stack overflow

• Easy way to change the label of the field for all user interfaces?

  How a client would change a label field for all user interfaces that use this field or attribute, which is not really a translation?

  What I have found seems to be that we would need to edit Resource Bundles and it will be much easier in version 8:

  1. the information on Resource Bundles in https://blogs.oracle.com/fadevrel/entry/translating_your_customizations section has this key passage:

  It is a standard open sector (OASIS) XML file with the extension .xliff format and store translated values for strings used by the ADF running. The general process is that these values are exported from the MDS, modified manually and then imported into the new repository. This must be done by an administrator, either via Enterprise Manager or WLST orders according to the screenshot below. It is detailed on the merger application Extensibility Guide.

  2. this blog announcement also says that it will be easier in version 8:

  Currently planned for version 8 is what we call the UI (UI) text editor. This tool will allow the mounting of all the text on the pages and merge request forms. This will provide a search based on an expression or a Word, say 'Worker' and will allow it to be adjusted, tell 'Employee', which then updates all the resource bundles that contain.

  3. I found video, How to customize field labels , but it seems that it is a label of the user interface at the same time...

  WIlliam, Yes, and we have a documentation and/or videos on this feature when R8 is available.

• 2 How to save the settings for all users.

  I recently had to move the hearing to a vista machine.

  Now, the Setup is a slight pain in the * mainly because of Vista in Vista.

  But now that I put it in place under my profile how can I keep those settings for all users?

  When a new person connects to this computer, it goes to the built-in default material (which of course didn't is not connected to anything) and not to the sound card that is connected to the mixer.

  So what I'm after, is a way to save all settings (including workspaces) and their default for all users (including users)

  (Please tell me there's a way to do it...) Having to configure AA for each trainee or a guest is going to be an incredible pain in my *.)

  Thank you.

  Audition CS6 and later have the opportunity to create "Machine-specific device settings" that replace a users roaming profile preference files when you connect to jobs at random, but cela was not available in Audition 3.  There may be solutions workaround, depending on your network configuration, but nothing as nice and direct.

• HOWTO enable Adobe pdf-plugin and add packs of langugate for all users

  I have firefox installations on many terminalservers and my users are tapped daily with a prompt to enable Adobe PDF plugin view PDF files in the browser.

  We use a Group Policy object to substitute different parameters on the homepage by default and disabled the built-in PDF reader.

  How can I activate the plug-ins for all users?
  How to install the langugate packs and a dictionary for all users for Norwegian?

  Unfortunately, you can install is no longer extensions including Linguistics by the record of distribution/bundles in the Firefox program folder.

  • Bug 1144127 - Remove support for distribution/bundles (39 +)

  For language packs, see:

  • https://developer.Mozilla.org/Installing_extensions
  • https://developer.Mozilla.org/Adding_Extensions_using_the_Windows_Registry

  A file to mozilla.cfg in the Firefox program folder can be used to lock the prefs or specify new values (default).

  A file local - settings.js must be placed in the folder "by default/pref" also the file prefs.js - channel where to specify using mozilla.cfg.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0);
  

  These functions can be used in the mozilla.cfg file:

  defaultPref();	// set new default value
  pref();		// set pref, allow changes in current session
  lockPref();	// lock pref, disallow changes
  

  See the Configuration:

  • https://developer.Mozilla.org/en-us/Firefox/Enterprise_deployment

  See also:

  • http://KB.mozillazine.org/Locking_preferences
  • http://Mike.kaply.com/2012/03/16/customizing-Firefox-AutoConfig-files/

  You can try this in the mozilla.cfg file:

  //
  pref("plugin.state.nppdf", 2);

• 33 Firefox extension for all users

  How can I make an extension available for all users using Firefox 33?
  I have the as and extract if necessary?

  See:

  • https://developer.Mozilla.org/Adding_Extensions_using_the_Windows_Registry