Time Machine periodically tells me it has not saved in two weeks

Similar Questions

• Time Machine the new disk transfer has not moved all the time

  I have a Time Machine backup to an external drive. It works very well. However, he was beginning to run out of space, so I bought a new, bigger HD.

  I followed all the steps of Time Machine: how to transfer backups from a current backup disk to a new backup drive - Apple Support.

  I then waited 12 hours for that copy.

  Around midnight, I noticed the copy is complete. There was a message that iWork had not been copied because he needed a different operating system. But I rejected. There are no other messages.

  I changed the Time Machine preferences on the new disk. And fell asleep.

  This morning, I walked into a Time Machine.

  Only the first date from July 2014, was on the new disc of TM. Then there was five times after midnight when the new drive was saved.

  But there is nothing in any of the years between the first date and after midnight.

  I know that there are hundreds of TM captures on the original disc. And I've used them very well.

  I tried to copy individual files from the old drive to TM to the new, but it is not possible to "change the backups."

  10.10.5 system

  What should do?

  While in Time Machine, to see all the volumes mounted shift - command - c.    Information derived from Linc Davis.

  If this does not work, try to copy the file to disk/restore utility using to copy the backup to a new location. Please note that this will reformat the destination partition.

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• I just restored my HD Mac from a time machine backup and PS 4 will not open. I get an error code 150:30. No idea what I need to do?

  I just restored my HD Mac from a time machine backup and PS 4 will not open. I get an error code 150:30. No idea what I need to do?

  Most likely your Photoshop installation was damaged by the restoration. Re-installing Photoshop CS4. You can find the latest version that has been published here: products CS4 download

  Benjamin

• Delete photos from my camera do not roll after the update to 9.3.1 IOS iphone 4s, also the photo has not saved when taken by camera

  Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

  Mhefzi86 wrote:

  Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

  OK, thanks for sharing.

  Maybe you can provide clarification comments on what happens when you try and what troubleshooting steps you did.

• Time Machine backup fails because "there is not enough space on the «DiskStation «»

  My backups regular TimeMachine to DiskStation stopped working a few months ago.  I thought it was because I ran out of space but now I installed an extra 1 TB RAID and I always get this error message.

  Here is the chronology of events that led to the error message.

  16/01/10 23:09 - Backup started manually (1.47 TB TB 2.45 available):

  

  16/01/10 23:11 - preparation of backup... (1.47 TB TB 2.45 available)

  16/01/10 23:15 - "backup: zero KB of 63.8 MB, calculating time remaining..." »

  16/01/10 23:22-2.1 MB saved 63.8 and the first estimate of the remaining time: 'about 4 hrs.

  

  16/01/10 23:50 - now 2.3 63.8 MB MB, 16 hours left (I'm ready for bed).

  16/01/10 23:55-5 minutes later and it backed up 419 MB!

  16/01/11 00:55 - an hour later and it is up to 6.72 GB but the gas target increased to 7.39 GB (I went to bed)

  16/01/11 06:50 - next day morning and it's up to 23,76 GB and the goal is now to 26.13 GB

  

  16/01/11 18:49 - I go home at night and it failed.

  

  

  

  Here is the view viewfinder of the TimeMachine file that I am trying to backup (note, a lot of disk space):

  

  This is the view of the Inspector of it:

  

  System details:

  -MacBook Pro 2013 with OS X 10.11.2

  -LAN WiFi Pace 2Wire998 router with DiskStation connected by Ethernet, MacBook Pro by WiFi

  -Synology DiskStation DS411slim with 4 x 2.5 "hard drives installed.

  A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine, especially if it's your only backup. I know that's not what you want to hear. I know that Time Machine accepts the device as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you are trying to restore and find that you can't.

  Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification. They all use the application of Netatalk incomplete, obsolete Apple Filing Protocol.

  Apple does not endorse any device third-party network for use with Time Machine. See this support article.

  Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

  Otherwise, use Time Machine at all. There are other ways to save, although none of them are nowhere near as effective or as well integrated with OS X. I don't have a specific recommendation.

  If you are determined to continue to use the device with Time Machine, your only remedy for any resulting problem is the manufacturer (who will blame Apple, neither you nor anyone else but herself.)

• Unplug the machine but private interconnection cable has not restarted

  Dear all,

  I have RAC Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - database of 64-bit on Linux.

  I had a strange experience with my private of interconnection between the 2 nodes. When I test disconnect interconnection link private in one of the nodes, the machine has not restarted. When I check in the cluster log, it is said to one of the nodes is restarted.

  2013-10-07 12:34:18.570

  [cssd (7565)] CRS - 1612:Network communication with node centaurus22 missing (2) for 50% of the timeout interval.  Removal of this node of cluster in 14,360 seconds

  2013-10-07 12:34:25.572

  [cssd (7565)] CRS - 1611:Network communication with node centaurus22 missing (2) 75% of the timeout interval.  Removal of this node of cluster in 7,360 seconds

  2013-10-07 12:34:30.573

  [cssd (7565)] CRS - 1610:Network communication with node centaurus22 missing (2) 90 percent of the timeout interval.  Removal of this node of cluster in 2,360 seconds

  2013-10-07 12:34:32.935

  [cssd (7565)] CRS - 1607:Node centaurus22 is to be expelled in incarnation cluster 272740834; details at (: CSSNM00007 :) in opt/app/11.2.0/grid/log/centaurus21/cssd/ocssd.log.)

  2013-10-07 12:34:34.937

  [cssd (7565)] CRS - 1625:Node centaurus22, number 2, has been closed manually

  2013-10-07 12:34:34.952

  [cssd (7565)] CRS - 1601:CSSD Reconfiguration is complete. Active nodes are centaurus21.

  2013-10-07 12:34:34.965

  [crsd (8720)] CRS - 5504:Node event reported for the node 'centaurus22 '.

  2013-10-07 12:34:36.427

  [crsd (8720)] CRS - 2773:Server "centaurus22" has been deleted from the pool "generic."

  2013-10-07 12:34:36.428

  [crsd (8720)] CRS - 2773:Server "centaurus22" has been deleted from the pool ' ora. SASDB'.

  2013-10-07 18:46:28.633

  Have you ever faced this problem?

  Your help will be kindly appreciated.

  Thank you

  Kind regards

  Moussa Hanafie

  Fencing without rebooting is introduced in 11.2.0.2 grid Infrastructure, instead of restarting a node as pre - 11.2.0.2 during expulsion happens, he'll try to stop GI gracefuly on the evicted node to avoid a restart of the node.

  http://www.Trivadis.com/uploads/tx_cabagdownloadarea/Trivadis_oracle_clusterware_node_fencing_v.PDF

• Time machine backup my photos that are only saved in iCloud?

  Mac Book Pro version: 10.11.3.  Memory: 8 GB 1867 MHz DDR3 processor: 2.7 GHz Intel Core i5

  I record copies "full" of my photos in iCloud.  I am now saved my computer with Time Machine, I wanted to know that it would also make a back up of files that I have on iCloud.  and if not then how can I do to save my iCloud on an external hard Bank without first download the files on the laptop...?

  Thank you!

  Time Machine backs up everything on your Mac, including photos by iCloud if you only send copies reduced to your Mac (storage management) it's what will be saved.

• Windows Vista has not saved password for shared network folder

  Whenever I try to open any resource on our network, it always ask password click even RECORD on several times. I checked in the credentials manager, there is no password is saved and I tried to add the IP network to share resources, but also has not worked

  Hello
   
  1. who is the edition of Windows Vista installed on the computer?
  2 you get an error message when trying to access the network resource?
   
  Please, try the following steps and check the result.
  1. click on start, type control userpasswords2 and click on enter.
  2. on the window user accounts, on the users tab, click the Add button and add the details of the user.
  3. click on the Advanced tab on the window user accounts, and then click manage passwords.
  4. click on the Add button, add the details and select the type of credentials according to your requirement.
  5. apply the changes and check the result.
   
  Visit this link for more information on "Troubleshooting network connection problems":
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Video has stopped playing and has not saved after alert imessage

  During video recording on my iPad, I received an alert from iMessage.  The video has stopped playing and did not save what has been already registered.

  Is this a normal behavior or y at - it a setting I can change to block all alerts being recorded?

  Thanks in advance.

  Hi sabfa,

  If you do not want to be interrupted when you save the video on your iPad, try to activate do not disturb.

  Use of do not disturb on your iPhone, iPad or iPod touch

  Turn on or off the do not disturb

  When do not disturb is activated, a Crescent Moon , or half-moon, an icon will appear in the status bar. There are two ways to turn on or off the do not disturb:

  • Tap Settings > do not disturb. Choose the manual option to activate the do not disturb sign now or set a schedule.
  • Swipe up from the bottom of the screen to open the Control Center. Tap on the Crescent Moon.

  

  Change your settings

  You can also choose if you want to be disturbed:

  • Allow calls to: allow calls from anyone, person, your Favorites or stored on your device or your iCloud account specific contact groups.
  • The calls repeated: If someone calls you twice within three minutes, the call will not be silent.
  • Silence: select silencing calls and notifications always or only when the device is locked.

  Take care

• Windows xp has not updated for two months and will not open internet explore.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: who can I cotact to solve this problem?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  Windows XP Edition with Service Pack _ _, _ - bit?
  (Fill in the blanks).
   
  Antivirus solution that you use now and all the others that have already been installed on the system to your knowledge (including trial versions)?
   
  Why you waited two months?  What you have tried in these two months?
   
  I'm guessing that you have Firefox or an alternative browser?
   
  Assuming Windows XP with Service Pack 2 or higher * and * 32-bit...
   
  Please check * exactly * what you have:

   

  AutoScan--> RUN (no 'RUN', press the Windows_Key + R at the same time)--> type:
  winver
  --> Click OK.
   
  This will give you (top photo) the full name of the operating system.
  This will give you (in the text) the Service Pack you have installed.
   
  How to determine whether a computer is running a 32-bit version or 64-bit
  version of the Windows operating system
  http://support.Microsoft.com/kb/827218

   

  Please post your results here in response to this message.

   

  If you have Windows XP (any edition) 32-bit at least SP2 already installed (SP3 is preferable) and then continue on after the posting of the above requested information...

   

  Restart, and then log on as a user with administrative privileges.

  Difficulty your file or registry permissions...

  Ignore the title and follow the subsection under
  "Advanced Troubleshooting", titled,
  "Method 1: reset the registry and the file permissions.
  http://support.Microsoft.com/kb/949377
  * will take time
  * Skip the last step (6) - you * should * have SP3 now.

  But if you do not, we are not only fixing right now.

  You may see errors go even if you watch, count upwards.  NO.
  worries at the moment.

  Restart, and then log on as a user with administrative privileges.

   

  Download, install, execute, update and perform a full scan with the following
  (freeware version):

  SuperAntiSpyware
  http://www.SUPERAntiSpyware.com/

  Restart, and then log on as an administrative user.

  Download, install, execute, update and perform a full scan with the following
  (freeware version):

  MalwareBytes
  http://www.Malwarebytes.com/

  Restart, and then log on as an administrative user.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx

  You find nothing, you will only find cookies, you may think that it is a
  waste of time - but if do you these things and report back here with what you
  / don't think you do all that - you add more parts to
  the puzzle and all of the picture just may become clearer and your
  problem solved.

  Restart, and then log on as an administrative user.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Restart, and then log on as an administrative user.

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your drive C:\.  After you have saved in the
  root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'run.) --> Click on NEXT--> select 'I agree' and click
  THEN--> when it completed the installation, click "Finish"...

  Restart, and then log on as an administrative user.

  Visit this web page:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ... and click on the "Microsoft Fix it."  When asked, select "RUN."
  both times.  Check the box "I agree" and click "next".  Select the check box
  to "Run the aggressive options (not recommended)" and click "next".  Let
  He finish and follow the instructions until it does.  Close/exit and
  reset when it is.

   
  You should now perform a full CHKDSK on your system drive (C :)...)

  How to scan your disks for errors
  http://support.Microsoft.com/kb/315265
  * will take time and a reboot

  You should now perform a full defragmentation on your system drive (C :)...)

  How to defragment your hard drives
  http://support.Microsoft.com/kb/314848
  * will take time

  Reboot again.
  Log in as a user with administrative rights and open Internet Explorer
  and visit http://windowsupdate.microsoft.com/ and select to make a
  CUSTOM scan...

  Whenever you are about to click on something in these pages - web
  first of all, press on and hold down the CTRL key while you click on it.  You can
  release the CTRL key after clicking on each time.

  Once the scan is complete, select that ONLY updates of high priority
  (deselect all others) and install it.

  Reboot again.

  If it worked - try the web page - selection not more than 3-5 a
  time.  Reboot as needed.

  The optional software updates are generally safe - although I recommend
  against the 'Windows Search' one and all of the "Office Live" those or
  "Windows Live" which for the moment.  I would like to avoid completely the
  Optional hardware updates.

  Seriously - do these things.  It's like antibiotics - do not skip a single
  step, don't leave because you think it will be ok now - review
  until the end, until you have done all given in the order shown.  If
  you have a problem with a step to ask and let someone here, you get
  Thanks to this step.  If you do not understand how to bring one back
  and ask here on this step and let someone guide you through it.

  Then - actually - that everyone here knows if it worked for you - or if
  you have more questions.

  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• Help with Time Machine

  Although I've owned a mac for years, I started using Time Machine a few months ago only.

  For two weeks, I said that my backup disk was full. Today, I got the message that the backup failed and that yesterday was the most recent upward. a double click on the backup disk, I see the records dating back to November. However, when I get Time machine, I can only highlight yesterday.

  So, a few questions.

  1. the November record is really an existing back-up? Why do I see there, but not in Time Machine?

  2. I have several external hard drives that I use for Time Machine and I am interested in finding someone to help me with the best solution to achieve my goal. That is, to remove the 300 GB of photos I have on my internal hard drive to an external hard drive, while still supporting upward from my internal hard drive and a multimedia hard drive for Time Machine.

  I hope I can say this is not confusing.

  I have an internal 500 GB running 10.11.1 HD because I have pictures of some 300 GB internal hard disk, I only 6.66 GB of available space.

  I have 3 external drives available that I can use for the back upward. 1 TB, I got for Christmas and is not used for anything and 2 500 GB HDs... one of them is currently used for Time Machine. The other has a backup is no longer necessary, so I can be erased.

  In addition to using Time Machine to back up, I also pay a monthly fee for Crash Plan. Even though this was my home folder files, it does not back up the operating system. I can, however, point it to back up an external hard drive.

  Finally, these are my questions. To free up space on my internal hard drive, can I (should) move the photos off my internal HD (I don't use iphoto) and put them on an external HD and then have my internal HD and HD with photos backed up with TM? Would it not be better to transfer my photos on a 500 GB HD and then use the 1 TB (without this partitioning) to back up both the internal and external HDs?

  I hope that what I am asking is logical. Thanks to all those who want to take part of my ramblings and give a meaning to me.

  Respectfully,.

  Cayleen

  What I do with my Mac sounds a bit like what you ask to do with yours. I have:

  -Photos and movies on an external drive (500 GB on a 2 TB disk)

  -The rest of my data on the drive internal (approximately 300 GB on a 1 TB drive

  -The internal and external are saved on a third drive (3 TB) used for Time Machine.

  Everything works very well.

• Time machine WiFi

  I tried to set up my Time Machine in wifi, but it has not been smoothly.  I heard going into this, it would be slower than the connection to my computer directly.  That being said, I plugged it physically to my MacBook and headed the first backup.  I then took and hooked up to my Mac Mini and accessed via the network and configure it to return here.  The problem, I ran in to is that it does not recognize it as the same player he already saved on when it has been connected to the MacBook when I connect it to the Mini.  Is it possible to have recognized, it already has and does not need to try to make a first new backup (which, at the speed he was going, would take more than one week)? Any suggestions would be greatly appreciated.

  That being said, I physically hooked to my MacBook and then ran the first backup

  You're talking about a USB?

  Or a Time Capsule? That is to say Apple router with a hard drive inside for Time Machine backups.

  If this is the first, you can't do what you did... I'm sorry.

  The time Machine uses a different method on local and network... drives a USB is plugged into your computer, it's local... when it is plugged into another computer and shared, it's network.

• Time machine backup is too large, that is not true, said

  After the upgrade to OS Sierra, Time Machine always tells me that the backup is too big to fit on the external drive that I use. I erased the disc and checked all volumes, I don't want to back up. He always tells me that the backup is 2 TB.

  My boot drive has 155 GB in use, I do not understand why TM attempts to use 2 TB. I've removed the preferences, he always tells me that it is too big. The external drive has 1 TB of free space.

  Any suggestions?

  If you open Applications > utilities > Terminal and paste the following command and press return, what is the result:

  DF h

• Time Machine is not backup as I loaded Sierra

  My time Machine says that it has not saved for 890days? Since I loaded Sierra now its in "preparing backup" permanent mode

  Reboot, try again.