time machine the ignored files

Similar Questions

• Disk utility does not not what Time Machine backup connected / file Vault question?

  Hi all

  I'm on Mac OSX El Capitan 10.11.3 (15 d 21) on a Macbook Pro 8.2 (early 2011)

  Previously, when File Vault was not activated I've been able to backup on my external drive for Time Machine (1 TB store Transcend jet) and the drive was visible when opening disk utility no problem...

  Now since I have encrypted my first Macintosh HD using File Vault, my disk utility program will not load when my Time Machine (unencrypted) external backup disk is connected, and I can not back up by using the application Time Machine (the player is simply not visible).

  When my external drive for Time Machine is not connected, my disk utility opens very well and I can see my Macintosh HD all external USB drives.

  I tried to re-boot, I tried to disconnect all external devices, I tried to connect the Time Machine drive with two USB ports and I tried to open the first disk utility, and then connect the external drive for Time Machine without success.

  Anyone else have experience with this problem or something similar? Any help and advice would be greatly appreciated.

  Thank you very much!

  Connect your Time Machine backup disk

  Open a Terminal

  Diskutil type: list

  Paste the results

  Should look like this screenshot.

  

• I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Plays in the video source, but does not allow me to change on the time line with the. MXF files.

  I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Video plays in the source window, but does not to drag me and thenedit on the time line with the. MXF files. audio will slide to the time line, but not the video. Interestingly, not later than end of December 2015 it allowed me to change with .mxf files, but no, it won't. Any help out there?

  Neil, get it fixed, I do not have the video channels set correctly on the left

  side of the line of the time. Learn the new adobe; Thank you

  Monday, February 15, 2016 13:20, R Neil Haugen [email protected]>

• Time Machine destruction by file type?

  Is it possible to find files on the Machine of time per file type (in this case the .psd files) and delete them? PSD eat huge amounts of storage, so I convert to JPEG for the photo archives.

  DO NOT delete the backups Time Machine! Time Machine will do this automatically, enter TM and edit it by removing backups may make TM crash against the purpose of having a backup plan. If you think you need more space then get a bigger DHM and move your TM top backup history. It is relatively simple and inexpensive to do.

• Time Machine security and file Vault

  I've been using Time Machine to backup my Mac on a HDD external Cie La for a long time.  I wonder if someone would be able to access my ups back if they stole my external HDD of the Cie. I recently started using the file Vault on my Mac but my HDD external Cie La was temporarily disconnected when I used the file Vault to encrypt my Mac. I need to run File Vault to encrypt my Cie La external HARD drive? (I partitioned my HARD drive the Cie I use part to store your confidential files. When I created the partition I used for the password of the Cie system protect the part where I store my confidential docs, but not for the part that handles the back ups time Machine). Any advice on this subject would be greatly appreciated.

  FileVault encrypts only your drive hard iMac, not your drive Time Machine, so that anyone with access to your external drive can view and restore your backups.

  Time Machine has acquired an option that allows you to encrypt your backups. Just follow these steps-> OS X Yosemite: secure your Time Machine backup disk

  Apart from that, you have two partitions on your drive externally (one for backup) and another for your personal files or is in a partition? I suggest you keep your backups and your personal files in different partitions or drives, as they may interfere with Time Machine.

• Time machine and old files

  I run two external drives for Time Machine.

  An external HD to store the files got somehow deleted.  He had a lot of old customer files.

  Time Machine only allows me to look at the files around the age of 2 months.

  Is it possible to recover?

  Is there a way to keep old files?

  Taz - d wrote:

  I run two external drives for Time Machine.

  An external HD to store the files got somehow deleted.  He had a lot of old customer files.

  Time Machine only allows me to look at the files around the age of 2 months.

  Is it possible to recover?

  Is there a way to keep old files?

  Do you mean the file exist in Time Machine - or that they were on a non-time drive machine.

  Time machine is not for permanent backup of the files you want to delete from your hard drive - daily backups are consolidated/cleaned in weekly backups - so if you had a file in the middle of the week - then deleted before the end of the week - time machine will not it also on the weekend date, the file did not exist on the hard disk.

• Time Machine the new disk transfer has not moved all the time

  I have a Time Machine backup to an external drive. It works very well. However, he was beginning to run out of space, so I bought a new, bigger HD.

  I followed all the steps of Time Machine: how to transfer backups from a current backup disk to a new backup drive - Apple Support.

  I then waited 12 hours for that copy.

  Around midnight, I noticed the copy is complete. There was a message that iWork had not been copied because he needed a different operating system. But I rejected. There are no other messages.

  I changed the Time Machine preferences on the new disk. And fell asleep.

  This morning, I walked into a Time Machine.

  Only the first date from July 2014, was on the new disc of TM. Then there was five times after midnight when the new drive was saved.

  But there is nothing in any of the years between the first date and after midnight.

  I know that there are hundreds of TM captures on the original disc. And I've used them very well.

  I tried to copy individual files from the old drive to TM to the new, but it is not possible to "change the backups."

  10.10.5 system

  What should do?

  While in Time Machine, to see all the volumes mounted shift - command - c.    Information derived from Linc Davis.

  If this does not work, try to copy the file to disk/restore utility using to copy the backup to a new location. Please note that this will reformat the destination partition.

• Moving backups Time Machine - the operation cannot take place because the backup item is not editable

  I want to change the external hard drive that I use for my time machine backups. I went through the steps listed here:

  Time Machine: How to transfer backups from a current backup disk to a new backup drive - Apple Support

  It seems to work correctly. I shot TM back and adding the new drive. TM is now backing up files on the drive up, but there is a problem.

  For some reason, TM has begun to put backups "freely" for lack of better in the external hard drive, and not in the backups.backupdb folder for a week, then returned to save them in the backups.backupdb > ComputerName > files from backups. So in other words, when you click on the hard drive in the finder, it opens the player and you see a folder named Backups.backupdb and then a bunch of mixed in which files are backups time machine named 2016-01-24-XXXXXX, etc.. When you go to the folder Backups.backupdb, there's a more random "loose" time machine backup file 2016-01-23-XXXXXX, and then another folder with the name of computers and in the folder are all TM backups except loose ones I mentioned earlier.

  It seems that TM is working properly now, but I don't know why he put the files from the first days outside the backup folder. However, when I do drag, I get the error:

  The operation cannot be completed because backup items is not editable

  I want to just put all the files in the right folder so that I can A) keep my disk organized and (B) ensure what TM can find everything correctly should I have to go back.

  No idea what is happening and how to fix it?

  Although the documentation Apple says you can copy Time Machine backups in the Finder, it is very slow and sometimes does not.

  This technique works only if the volume that you copy to the same size or larger that that you are copying to.

  First of all, please open the Time Machine preference pane and click the Select Disk... button. You may be able to unlock the settings first, by clicking on the padlock icon in the lower left corner of the window. Log in as administrator.

  Remove the volume you want to copy in the list of backup destinations. Then turn off Time Machine.

  Launch disk utility, open the built-in Help and search for the term 'Double '. Follow the instructions. All existing data on the destination volume will be deleted. That shouldn't be a problem, because you do not want to mix non-sauvegarde and backup data on the same drive anyway.

  If the volume you are copying has been encrypted by Time Machine, you must first unlock it. Click the release button in the toolbar of the disk utility window.

  Turn Time Machine back on and select the new volume as a backup destination. Alternatively, you can continue to use the old volume, if you wish. Both will be alternated when both are available.

  ATTENTION: If you copy the volume is corrupted, as shown by the ERD or first aid in disk utility, while corruption is copied to the new drive. Do not copy data from a damaged on a faulty disk volume. Put aside the reader and do not use until you don't know that you no longer need the data. Then securely erase it and bring it to a recycling center. Do the same if the restore operation fails with "disk errors."

• How to connect a new MacBook in my time for the initial file transfer capsule

  How to connect a new MacBook to my existing time capsule to transfer files as part of the first implementation of my MacBook?

  You say that you have a new MacBook and that you have posted to the forum for the retina MacBook 12 "section, but your tag indicates that you have a MacBook Pro. Please specify.

• Fusion drive: restore from Time Machine - "the disc cannot be erased."

  Hello

  On a new iMac (end of 2015), I need to wipe my drive of Fusion of 3 TB (El Capitan, unencrypted, just 1 partition, no Boot Camp partition) and then restore a backup Time Machine (made on a previous iMac, also with disc Fusion of 3 TB (El Capitan, unencrypted, just 1 partition, no Boot Camp partition).

  According to the document from Apple: https://support.apple.com/en-us/HT204904 'restore from a Time Machine backup' I...

  1. restart with cmd + R (later also tried cmd + alt + R and also a USB bootable of course El flash drive)

  2 selected "backup restore Time Machine"

  3 selected my external backup disk, Time Machine

  4 choose the most recent backup

  5 selected "Macintosh HD" as a destination and click "continue".

  ... but then the following message appeared "disc cannot be erased.

  

  Then I tried to erase 'Macintosh HD' via disk utility:

  1. restart with cmd + R (later also tried cmd + alt + R and also a USB bootable of course El flash drive)

  2 choose disk utility

  3 choose "Macintosh HD"

  4. click on tab "delete".

  5. click on the button 'clear '.

  ... then I got the error message:

  "Clear process failed..." Details: Dismantling DIS3 - deletion of logical volumes of the logical volume group - cannot remove the basic storage logical volume. Operation failed... »

  I was in the 'loop', the only way out was to "Reinstall Mac OS X", and then after many hours, he had once again my old installation flubbed with everything I wanted to get rid of!

  How to restore my backup Time Machine - nothing more or less - to my new iMac?

  I lost 3 days now with this problem. I really hope someone has a solution.

  Thank you very much!

  Apple did not provide an easy way to recover from this condition. If you are not able to carry out these instructions, please someone more experienced to help you get. One option is to take an appointment 'Genius' on an Apple Store.

  Starts the Internet recovery mode by pressing the key combination command-option-R to start ringing. Release the keys when you see a spinning globe.

  Note: You need an Ethernet or Wi - Fi connection permanent Internet to use recovery. It will not work with modems USB or PPPoE, proxy servers or networks that require a certificate for authentication.

  In the OS X Utilities screen, select

  Utilities ▹ Terminal

  in the menu bar at the top of the screen, not one of the items in the OS X Utilities window.

  Follow the steps in this thread to ASC to split the fuser unit. The long string of letters, numbers and dashes you will need to enter will be different in your case. Copy and paste into the command in the Terminal window.

  This will remove all data from the fuser unit, then you had better be sure of your backups.

  Quit the Terminal, and then repair the Fusion drive (see "Troubleshooting" on the linked page.)

  Quit disk utility. Then you should be able to install OS X and restore your data from a backup in the main screen.

• Time machine, the size calculation

  -What this means: calculation of the size? I'm trying to locate a document missing in my application Pages. I enter Time Machine, go back, and then select Pages, which is followed by the window with the eternal message: size calculation. I do something wrong, but I don't know what. Happy new year.

  OS X El Capitan: recovering items using Time Machine and Spotlight

• How to write the Date/time of the PDM file property

  On the page root of the PDM file, there is a predefined, property called ' Date/Time' in the first row.

  I would use it to save the timestamp when the tdms file is created. But in the help file.

  I find that the following property constant. So, how can I write to the field of property ' Date/time '?

  Property	Constant	Data type
  Name	TDMS_FILE_NAME	String (char *)
  Description	TDMS_FILE_DESCRIPTION	String (char *)
  Title	TDMS_FILE_TITLE	String (char *)
  Author	TDMS_FILE_AUTHOR	String (char *)

  Thanks for any idea or suggestion.

  You are not sure if it's exactly what you want, but have you tried that?

  CVIAbsoluteTime            CVItime, *t = NULL;
  TDMSFileHandle          deH = 0;
  
  // Create TDMS file and set some properties
  errChk (TDMS_CreateFileEx (file, TDMS_Streaming2_0, TDMS_ByteOrderNative, 0,"example.tdm", "someText", "title", "author", &deH));
  
  // ...
  
  GetCurrentCVIAbsoluteTime (&CVItime);
  errChk (TDMS_SetFileProperty (deH, "Date/Time", TDMS_Timestamp, CVItime));
  
  // ...
  
  // Save and close fileerrChk (TDMS_SaveFile (deH));TDMS_CloseFile (deH);
  

• Extracted from LAVA - crush keeps old date/time of the png file

  I don't know if this is a bug, or to behave like that.

  Scenario: create an extract using the tool of LAVA. I just use the same name (and path) of an existing png file that was created by the same LAVA tool a few days before also (so I replaced the original file). I opened the case, and to quickly find the newly created excerpt, I ordered the files as a descendant by time and date. To my surprise I couldn't find the code snippet in the upper part. The reason was that the new file kept the date/time from the original one.

  This is a really minor thing, but it made me curious. Under windows, when I rename a file, it retains the original timestamp. However when I crush him, it updates.

  LabVIEW 2015 (32-bit),

  Code Capture Tool v3.2.1 - 46 lava

  As I said, look at the code of the COMMON customs tariff. The only thing I can think of that would make it interesting is the code snippet, which is a flow within the PNG file, something that the VI of shipment is not compatible. I don't know more how it's done exactly - it might be created under the PNG in memory and then writes to the file directly or can be injected into the file after shipping VI saves it.

  Either way, I just did a test fast in Notepad and if I do record under and tell him to replace an existing file, the date of the creation of this file does not seem to change so this seems to be normal behavior for Windows. I don't know if the Windows API file deletes the file and creates a new or simply modifies the existing file when you perform this operation.

• Could not start the virtual machine: "the specified file is not a virtual disk.

  Hi, I have a problem from a guest vm-workstation.

  Details below - I've done some reading here for some other "the file specified."

  is

  not a virtual disk' messages and I suspect that I am out of luck

  but I have

  wanted to ask just in case there was something miss me

  Here I tried to gather records / logs that other threads

  mentioned - I

  Welcome to all the tips on the revival of the guest, or a

  pointer to a how-to on recovering the files of a given snapshot.

  Thank you

  John

  Summary:

  VMware workstation: 7.0.1 build 227600

  host of os: Vista sp2, 64-bit

  (16 GB of ram)

  guest operating system: sles10 sp2 64-bit (4 GB ram)

  the virtual machine folder:

  drive eSATA (samsung 320, blacx attachment)

  symptom: guest vm

  does not start: says "the specified file is not a virtual disk.

  history: this particular comments works fine; I've done about 30 shots

  during the last 2 months.  The guest is not a copy - even if she did start life as a full-clone

  another linux-client with or without an operating system installed.  In any case, I've used it to very good

  effect for 2 months now.

  So last night I wanted to power off of the host, while I lived my usual steps:

  (1) stop my os of burst (# shutdown - h now)

  (2) even worksation vmware (file - & gt; exit)

  (3) stop start vista (not "suspend" but the real stop turn off the power).

  (4) visa bluescreened.  Now she is doing this every so often, so I thought that it would be

  a big deal.

  (5) this morning I tried to turn on the virtual machine and I got the 'not a virtual disk' error.

  My best guess at this point is the bluescreen stopped some write cache to be

  flushed to disk.  The funny thing is, after the previous bluescreens 3 or 4, the

  Comments to restart without a hitch.

  shrug In any case, just to be weave, I disabled write Vista for outside cache

  device (set to security policy / deletion in Device Manager).  Seems smarter to

  an external device.

  Spare part

  Attached is a file cant_start.zip (191KO) containing:

  dircontents.txt - directory of the client's file listing
  sles10_sp2. NVRAM
  sles10_sp2.vmsd
  sles10_sp2.vmx
  sles10_sp2.vmxf
  VMware.log - other requests asked for *.log files, so I thought
  VMware - 0.log - I should send him these as well.
  VMware - 1.log
  VMware - 2.log
  \ui-logs - 2 IU-logs from C:\Users\jgreve\AppData\Local\Temp\vmware-jgreve
  \vmdk_files - subdirectory of *.vmdk files, light, & can be useful
  -end-

  I checked the VMDK and newspapers - and the VMDK all look great.

  Last departure also seems to succeed?

  As it seems that instant 36 is not used so far - I was just going to throw it away and try again.

  To do this, you would change the line vmx file

  scsi0:0. FileName = 'suse11.2_x64 - cl1 - 000036.vmdk.

  TO

  scsi0:0. FileName = 'suse11.2_x64 - cl1 - 000035.vmdk.

  and then try to restart the virtual machine. If that works then remove all the

  suse11.2_x64 - cl1 - 000036-* files

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Date and time of the photo files in PES 10

  I imported about 1000 photos (JPG) files in my catalogon my Office PC files I had saved on my PC laptop then only on vacation.  Most of the files have been imported without any problem, but some of them have been registered with false information of the time and the date.  My folders are named for the date the photos were taken, for example, 2012-03-12.  Some of the files are in a subfolder in a folder for another day, "c:\users\Don\My Pictures\2012-03 / 12\2012 / 03-08.  What causes this?  How can I get PSE10 work porperly?

  I have Windows 7, 64-bit PSE10 and a HP PC with 8 GB of RAM.

  In this example, all the images in the 2012-03-08 is passed in a subfolder to 2012-03-12? Or was there another folder for 2012-03-08 to the location of the root? Did this happen several times to different with different dates? Is it only in another folder (that is, made all of these random subfolders only appear to 2012-03-12)?