time of release

Similar Questions

• time of release with daqmx

  Hello

  How can I set the time of liberation with DAQmx?

  In general, with a single DAQ hardware, the two signals are connected at the same time and the acquisition time is a function of the sampling frequency and number of samples read. For example, with a sampling rate of 1000 samples/s and 50 samples, the acquisition will be 50 msec. You then get a returned array if you wanted to watch a single signal by iteration of the while loop, it is simply a matter of indexing the specific channel to the table. You must set the mode of continuous sampling to avoid gaps and precise timing. Using two separate tasks and switching back and forth would add a lot of overhead to close/create tasks and you have little control over this period.

• What a time limit for care?

  I waited more than 10 minutes and more for others to make their movements.

  What a time limit for care?

  There are players who walk away a game when they are behind but never

  you know, if you wait for a long time and then must get yourself out.

  A very juvenile manner to act.

  This game is fun when you have a partner of responsible gaming, but lately, there has been a lot of

  Obviously ignorant who play in an abusive manner.

  A reasonable period of time would solve a lot of this.

  If you do not travel in time, your release of the game...

  ROFL. You will need to address this with each different game, you're talking about, by contacting their support, or post in the forums. This isn't a general/portal for games information center.

• Release suspended blocking new version

  Hello

  first time the release request for BB. I updated my application with a new version (1.0.3), it has been approved but would not appear in the store and I didn't have people downloading version 1.0.2 so I chose "Suspend" on this version.

  Do you have the 'suspended' status, suspended the entire application? What can I do to fix it?

  Thank you for your time

  Hello isabelfr,

  Using the button "Suspend" removes only the release of visibility.  The application itself can be removed (or added) to the store with the buttons "remove from sale" / "on sale."

  Remember that when a new version is approved, it can take a few hours before the new version becomes available and visible in the store.

  Hope this helps,

• The next MacOs health activity. (GPS Track and Periforments.

  The next MacOs health activity. (GPS Track and Periforments!

  If your message is a request for features in a product new macOS, it will be lost here as the genius of Apple does not participate in this community of users to solution. Not for OS X or Mac OS.

  If you have the beta version of macOS Sierra, you can provide feedback via the appropriate support channel. As the end of June, it is very likely that new feature for Sierra macOS requests are frozen, and the rest of the time through release of the App Store will be refinements of the existing code of minimum standards of ship.

• Reset SMC fails to fix the problem of fan

  So I tried to solve a problem where my fans are running overtime on my end 2011 MBP 13 ". I did a reset of the PRAM and SMC. However, I'm not sure that the SMC reset has never really worked. In the past when perform SCM restores, I remember that my magsafe adaptor change color, this was not past. The problem with the fans running continues. I tried several times, it doesn't seem to work.

  I don't know that I'm following the correct procedure, taking the left SHIFT-control-option and power keys at the same time and releasing at the same time.

  Any ideas how to solve this problem?

  The fan or sensor is maybe defective.  Run Apple Hardware Test:

  https://support.Apple.com/en-us/HT201257

  Note that an error free AHT is inconclusive.

  Open the MBP and see if there is dust and debris inside.  If so, clean.

  Ciao.

• How to return to 24 of Firefox

  Upgrade to FireFox 25 on 05/11/13 and could get some information on a site immediately not much confidence I took for granted with FireFox 24. I use this feature A MUCH (MUCH!) Every day. But now I can't. The site allows you to display certain information automatically but seems not to do. By default FireFox reset or what you call does not solve the problem. How to return to 24 of FireFox to see if that solves the problem? The forum thing doesn't have the answer I can say. Your website doesn't even have it.

  Hi WarrenSmalley, to replace your current bookmarks + historical database with the former, you need to open both files at the same time, the release of Firefox, then copy the old file (I suggest copying rather than moving so that you can keep a non-corrupt copy).

  To open your current profile folder, either:

  • use the help > troubleshooting information > "view file" button.
  • type or paste everything: in the address bar and press Enter > "view file" button.

  You already know the location of your old profile folder (Desktop-old data from Firefox).

  After the release of Firefox, allow a few moments for the files to be updated before making the change.

• Problems updating to version 12.0 question + 64 - bit

  On the first question: my Firefox 11.0 will refresh by 12.0, even when you browse the path "about Firefox-> check updates". I know that the release date for 12.0 was today, so I don't understand what the problem is.

  On the second question: is it true that, since version 13.0, there will be a 64-bit version of Firefox? If so, users will be able to choose to upgrade to 64-bit before the update 12-13?

  Time of release 12 Firefox on demand (subject to change) is 8: HAP to the United States this time has not yet arrived from this response. Adjust right there at your local time.

  • The following link is for the discussion of the contributor only, but you can read only. See-> https://support.mozilla.org/en-US/forums/contributors/708320?last=46338

  The 64-bit version of Firefox may not occur for several months yet. Currently, there is a test at night (14 of Firefox) version, the less stable/secure level and should be installed by users very experienced for the test only. Plugins in 64-bit by third-party developers are still quite rare.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• To log-in, I get "your browser is probably wrong to identify as Mozilla 1.0.9".

  When you try to log on a site protected by password, the message I get is "unsupported browser". Further along, I read: "If you use FireFox 3.0 or higher and are at this page, your browser is probably wrong to identify as Mozilla 1.0.9. It is a problem experienced with Firefox and some plug-ins for Firefox. To correct this problem, please click here and follow the instructions. "After clicking"here", I get on the Mozilla site, where I"Page not found": http://support.mozilla.com/en-US/sb/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser

  Your welcome.

  IMO, it professionals who were not aware that Firefox 4 was released last month, having to work under a rock. With him before IE9 and Firefox 4.0 times be released in a few weeks apart, many sites of 'tech' had comparisons or estimated release date articles since the beginning of this year. How the hell that slipped in front of the spirits or the eyes of the personal site is beyond my thought process.

  When you logged in, please click the button useful next to the answer that solves your problem of Firefox support, so this thread is marked as solved.

• Satellite Pro A300 1NT - Possible to upgrade to Windows 7?

  Hello.

  I intend to buy the Satellite Pro A300 1NT, but want to make sure that I can not upgrade to Windows 7 and more specifically the characteristics of touch screen.

  Thank you for taking the time to consider my question.

  Hello!

  I think that no one can say whether the Satellite A300 compatible with Windows 7.
  Windows 7 is not on the market yet, and I think it will take a few times to release.

  And Satellite A300 doesn't have a touch screen, so I think that you cannot use these features on this laptop.

  Good bye

• Remove Bios password

  I have a model VPC-f1190x what Bios FRIEND R0280Y6 2.6. I've put a bios password on it and can not remember for the life of me. I can still use the computer, but I need to get the bios to change some settings and cannot. How can I remove this password with the duty take apart my computer?

  The only way to have your BIOS unlocked if you forgot to call technical support, we can provide you with a time of release by phone. only the highest level of support can help you with this.

  To speed up things have your proof of purchase ready to fax it to demand that we determine property for your protection.
  (a bit like check your ID when you use a credit card)

  http://eSupport.Sony.com/us/Perl/select... RC = CONTACT

  Best regards
  Kimberly

• Data storage problems iOS iPhone 5s 9

  Hello world

  I got this really annoying bug for awhile now (a few months, but it is omnipresent in the last 3 weeks) where my iPhone simply does not know the amount of storage it a. I have a 5 iPhone with 16 GB of space running on iOS 9. Keep saying it is short of space, but every time I release some (by deleting the photos, applications, etc.) it keeps charging right back upward. This moment I had released up to 200 MB, 20 minutes, it's back to 0 without me getting it. As a result, the entire contents of my iCloud is either eliminated or is not editable from my iPhone (Notes, calendars, etc.) and most of my apps crash, don't work or outright any bug (Messages always appear as send when they have actually been sent, Facebook and Messenger keep crashing my games does not work, I can't take pictures) etc.). I guess that's the reaction natural iPhone to be low on storage space, but thing is that I was not filling up... took photos in nearly a month, etc. So before I go and do a hard restore and backup (iCloud is not backup up more--> whenever I have it try it just says: backup could not be completed), I was wondering if anyone had any ideas as to what could happen and what can I do to solve this problem. Look for me for a while now, and if it it does not work, I'm switching to Android, with this simpler operating system. So if anyone has any ideas, feel free to share.

  Thank you!

  Tristan

  There are several reasons, this could happen - backup corrupt, rogue app, bad USB cable for syncing to iTunes, etc.  If you sync with iTunes, watch space 'other '.  If it is greater than about 2 GB, you can have one of these problems.  The common solution is:

  How to clear your iOS device and then set up as a new device or restore from backups - Apple Support

• Impossible to play with Satellite M60

  Hello

  I have a big problem my Satellite M60 CDE.

  I wanted to play with Cold Fear that requires:

  Operating system: Windows® 2000 / XP only
  Processor: 1 GHz processor minimum (2 GHz) recommended
  RAM: 256 MB RAM minimum (512 MB recommended)
  Cards supported at time of release:
  ATI® Radeon® 8500/9000/X series

  I install the game without any problem but when I click on 'Play', a popup appears to mention there was a problem and propose to send an error report message.

  I contact Ubisoft. They said my drivers must be updated I've done... without any change.

  Problems of game with the other titles? How to solve it?

  Some clarification on my Satellite M60
  Bought dec, 2005, a few months ago

  BIOS: Ver 1.00PARTTBLX
  : Processor Intel (r) Pentium (r) M 1.73GHz
  Memory: 1022MB RAM
  DirectX version: DirectX 9 .0c (4.09.0000.0904)
  Card name: ATI MOBILITY RADEON X 600 SE
  Track type: ATI MOBILITY RADEON X 600 SE (0 x 5462)
  Display memory: 256,0 MB

  Hello

  The fact is that the graphics drivers from Toshiba are not similar with the graphics drivers original manufacturer. Toshiba graphics driver supports an option of overheating. This means that the driver controls the performance of the graphics card. If the temperature rises the graphic card driver decreases the graphics performance of CAD.

  However, you can try to use an other drivers but at your own risk.
  Also, I read in this forum that the graphics drivers omega can also solve graphical problems.

• Pavilion p7-1054 PC: plug a second monitor

  I have two video outputs.  One VGA and one DVI.  I recently bought a TV with an HDMI input.  I bought a HDMI cable and a HDMI-DVI adapter.

  As indicated, I turned off the computer to hang it to the top.  After everything booted up I got a perfect image on the new TV, but the monitor with a VGA connection has only the wallpaper.  Because the screens are in different rooms, I'm not able to navigate to the things I want to view, for example ESPN3.

  I read the online manual on the implementation of two monitors.  It seems that this installation should work.  I see no way to get in which is hooked up manually.  There is only one automatic recognition.

  I know that I can solve this problem with a wireless keyboard with a slider control.  I'm hoping to do so without additional charge.

  Thank you.

  When you say you "don't see bottom on the VGA monitor", do you mean the bottom of screen/watch on the computer? If you follow the steps in my previous post, the same that displays on your TV screen on your computer at the same time. The only complication is that you have to do it blind, because the orders were in the other room.

  Instead of using your mouse to click on duplicate, we will try to select your keyboard. NOTE: this may take a few tries; if your screen is empty, don't panic, you can recover.

  If you have another person in your House who could watch the TV screen, try this: ask the person to support to tell you when the duplicate is selected, hold down the Windows key and the key P approximately once every second couple. As soon as your Assistant tells you that duplicate is selected, press the P button and release the Windows key is no longer.

  If you do not have a person for assistance, try this: hold down the Windows key and press the P button 4 times, then release. If the screen went all black, hold again and hold the Windows key and press 2 times P. repeat holding down the Windows key and the key P 2 times until you see the correct image on your computer screen.

• Transient analysis fails: Timestep too small

  I use Multisim 10.1 to assemble logic gates of transistors for an undergrad Electrical engineering class. Part of the specification is that doors should drive a 1 or 8 pF capacitor at the output in the 1nsec voltage. (I think that the circuit, which I've made available is the version 8pF).

  "Circuits work very well when I test for logical functionality with a frequency of input measured in seconds, but when I try to measure the time of release of a Ghz entry, the transient analysis invariably fails with a ' no time too small" error.

  I looked through the site or all kinds of possible fixes (adjustment of the values of the relative and absolute error, etc...), but no luck.

  for example, the project in question are: http://dl.dropbox.com/u/4286123/callforhelp.zip

  I would appreciate any advice, anyone can give me to help get the circuit able to run a transient analysis of higher frequency.

  Thank you!

  Brian Lojeck

  Student in EE, CSULB

  Hi Brian,.

  I took a glance at your circuit and it seemed that your cmos_andx8_timing_test_circuit.ms10 file generates errors of convergence. I did the following two changes in the settings of your transient simulation and circuit simulated very well:

  1. Scan options > SPICE Options > Use Defaults Multisim
  2. Crawl settings > settings > no time maximum (TMAX) = 1e-13 s

  As a general rule, you want to set the TMAX parameter to be substantially less than the smallest feature of your signal. In your case, the smaller is the rise in V1 (1ps) time. If possible, try to simulate with slower rise/fall times and slew rates. It is much easier for Multisim to converge semiconductor solutions if these settings were larger. I guess you do not have the luxury here, but if you were to just test the behavior of your circuit, it would be desirable.

  Hope that helped.