time, SNA and SEQUENCE number

Similar Questions

• Difference between the SNA and log sequence number

  Hi all
  
  Please, is there a difference between the number of number (SCN) and sequence of journal system change ?
  
  Thank you.

  Query V$ LOG_HISTORY or V$ ARCHIVED_LOG

  select sequence#, first_change# from v$log_history order by 1;
  select sequence#, first_change# from v$archived_log order by 1;
  

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• Insert/update of the XML help merge and to generate the sequence number

  Hello
  
  I'm working on Oracle 11 g.
  
  I have a doubt with loading XML.
  I get an xml and I need to insert or update data in a table. What I can accomplish by using the MERGE statement.
  But there is a column in A table, I need to fill with a sequence number, based on the data sent in the xml file.
  The XML does not send the data in this column.
  And I have to make sure that sequence is created according to the order in which the records are present in xml.
  For example the MERGER is insert five rows and update two lines and insert again 3 rows of xml in table A. The sequence number must be created in the same order for the column in the table.
  Also for every new XML, the sequence starts with 1 and ends with the number of records in the xml file. I can't create a sequence and use the seq.nextval.
  
  Please let me know, there is a way to achieve this.
  
  Thank you!
  
  Published by: 934451 on 8 August 2012 06:33
  
  Published by: 934451 on 8 August 2012 06:50

  Hello

  As a result of your previous thread: {: identifier of the thread = 2403469}

  You can use the clause for ORDINALITE in XMLTable to generate the necessary sequence:

  MERGE INTO target_table t
  USING (
    SELECT x.seq_num, x.pk_id, x.col1, x.col2, ...
    FROM XMLTable(
           '/root/record'
           passing my_xml_doc
           columns seq_num FOR ORDINALITY
                 , pk_id   number       path 'ID'
                 , col1    varchar2(30) path 'COL1'
                 , col2    varchar2(30) path 'COL2'
                 , ...
         ) x
  ) src
  ON ( t.pk_id = src.pk_id )
  WHEN MATCHED THEN UPDATE
   SET t.seq_num = src.seq_num
     , t.col1 = src.col1
     , t.col2 = src.col2
     , ...
  WHEN NOT MATCHED THEN INSERT
   (seq_num, pk_id, col1, col2, ...)
   VALUES (src.seq_num, src.pk_id, src.col1, src.col2, ...)
  ;
  

• Min and Max of the sequence number

  Hello
  
  I have a table called pins (lot number 4,
  Sequence number (8)
  );
  
  I have data in the table:
  batch sequence
  386 100
  386 101
  386 102
  386 800
  386 801
  1 387
  2 387
  
  I want to know by draw the low values and high for sequence number, is the result, I am looking
  
  batch min (sequence), max (sequence)
  386 100 102
  386 800 801
  387 1 2
  
  Oracle 10g rel2
  
  Thank you

  Hello

  You want something like this:

  WITH       got_grp     AS
  (
       SELECT     lot
       ,     seq_num          -- SEQUENCE is not a good column name
       ,     seq_num - ROW_NUMBER () OVER ( PARTITION BY  lot
                                                    ORDER BY      seq_num
                                        ) AS grp
       FROM    pins
  --     WHERE     ...     -- any filtering goes here
  )
  SELECT       lot
  ,       MIN (seq_num)          AS min_seq_num
  ,       MAX (seq_num)          AS max_seq_num
  FROM       got_grp
  GROUP BY  lot
  ,            grp
  ORDER BY  lot
  ,            min_seq_num
  ;
  

  If I understand the probem, you want to GROUP BY, but many does not define groups by itself: each contiguous set of seq_nums in a batch is a separate group. In each of these groups, the difference between seq_num and a meter which reflects the order of seq_num generated in the query (using ROW_NUMBER) will be constant.

  This assumes that seq_num is an integer, and this (lot, seq_num) is unique.
  If this is not the case, the above query will have a small adjustment.

  If you want to display the INSERT statements for your sample data, then I could test this.

• Help on recovering database /Restore - no available controlfiles kccpb_sanity_check_2 control file sequence number mismatch

  Hi all.

  I really need your help on this:

  (1) version: 11.2.0.1 EE / Windows.

  (2) database does not start, don't get database.

  Alert.log info:

  Instance of stopped by USER, pid = 3652

  2015-11-22 15:57:19.763000 - 04:30

  I found this after using adrci:

  2015-11-22 15:49:15.727

  SESSION ID: (191.1) 2015-11-22 15:49:15.727

  CUSTOMER ID :() 2015-11-22 15:49:15.727

  NAME OF THE SERVICE :() 2015-11-22 15:49:15.727

  MODULE NAME: (sqlplus.exe) 2015-11-22 15:49:15.727

  ACTION NAME :() 2015-11-22 15:49:15.727

  Informational message:

  Control file 1 has seq 2713995, low 2713994 file # 0

  Error: kccpb_sanity_check_2

  Control file sequence number mismatch!

  fhcsq: bhcsq 2713995: 2714016 cfn 0

  2015-11-22 15:49:15.758

  USER (ospid: 2504): put an end to the instance

  Verification of MOS Note: 435436.1 I must:

  (1) to restore a backup of a controlfile and recover

  OR

  (2) to recreate the controlfile

  OR

  (3) restore the backup data and recovery

  It is a database, that I was not, up to now administer. But:

  (1) I tried from the database with addressed controlfile (the one located in FRA). No luck. (Create pfile from spfile / startup pfile)

  (2) the database is not mount / open. It hangs on the editing process. So I can not issue an alter database controlfile to trace.

  It seems that my options are:

  (1) manual creation of controlfile with open resetlogs option. This option is viable, but risky if we miss a datafile or something GOLD

  (2) restoration of RMAN backup. The thing is that the most recent copy of automatic backup of controlfile is since a few days early (4 / 5 days).

  I found this link: http://gavinsoorma.com/2009/07/rman-recovery-from-loss-of-all-control-files/

  The procedure seems easy, but since this controlfile is not in the current SNA of database (data files, etc.). I'm not sure it if it would work.

  So in short, I think I have an automatic backup controlfile and it's OK. but a little old. I can restore from this copy of CF?

  Please I'm pressed real here, so help will be greatly appreciated!....

  Thanks in advance!

  Best regards, Luis...!

  Hello

  It seems that my options are:

  (1) manual creation of controlfile with open resetlogs option. This option is viable, but risky if we miss a datafile or something GOLD

  (2) restoration of RMAN backup. The thing is that the most recent copy of automatic backup of controlfile is since a few days early (4 / 5 days).

  It seems that you have few options,

  In my opinion, you should start with option 2), but you have logs archived redo and all and all the backups of catalog and perform a restore.

  After, if not works, you must manually create the control files, but you are right, you must carefully on all the data files. Here a log generated in the last level 0 RMAN backup could help you, don't forget the newspaper are all entries of data for backup files.

  I wish to have more ideas to help you, but I have no other.

  I hope this helps.

  Kind regards

  Juan M

• How to run a same sequence number for the dynamic lines resulting

  Hi friends,
  
  I have a sequence and the trigger (which will trigger the id for each line insertion).
  
  My scenario is, if I update more than 5 lines of a way of time, I need to define a same example (1) sequence number for all the 5 rows.
  
  Next time, if I update another way for 5 rows, then I need to define a sequence of the same number (i.e.) 2 for the next 5 lines.
  
  So my update will be dynamic (can be 2, 5, 10 rows at a time), but I need a same sequence number for one of the column for all of the lines that I'm updating the value.
  
  Next time, if I update another series of lines means, then I need to put only the next sequence number (i.e) 2 (assume this sequence previously updated to the front of the set of rows is 1) for another set of lines.
  
  As this sequence should update in a sequential manner for more than a set of rows in this column.
  
  How friends.
  
  example of

  id-----------------name
  1-------------------A
  1-------------------B
  1-------------------C
  1-------------------D
  1-------------------E
  2-------------------D
  2-------------------E
  2-------------------F
  2-------------------G
  3-------------------H
  3-------------------I

  Brgds,
  Mini

  Generate the value of the sequence and store it in a variable and use this variable in the UPDATE.

  varSequence := .nextval;
  
  update  set  = varSequence where 
  

• Sequence number to generate an item Code

  Dear friend
  
  I want to change my existing master finished painting and want to give a fresh article number in the following way.
  
  ITEM_TYPE ID
  ----------- --------------------
  
  RAW 100000001
  CYLINDER 200000001
  300000001 ENGINEERING
  VARIOUS 400000001
  500000001 PRODUCTS FINISHES
  
  Can you suggest me which application I should give. While in short time I can update my itemmaster with new item code table.
  
  Sandy

  First Exchange with the item_type, then a numeric sequence number?

  declare
  cursor types is
    select distinct item_type, rownum n
      from items ;
  begin
    for r in c loop
       update items
         set id = r.n||to_char(rownum,'FM00000000')
       where item_type=r.item_type;
    end loop;
  end;
  /
  

  Max
  [My Italian blog Oracle | http://oracleitalia.wordpress.com/2010/02/07/aggiornare-una-tabella-con-listruzione-merge/]

• My iPhone was stolen.  How can I get the IMEI and serial number so that I can make a police report?

  My 6s more gold-rose with 128 GB iPhone was stolen at the Apple Store Part Dieu today between 03:30 to 04:30. I want to file a police report because the store manager told me that cameras in the store that is accessible only with a police report.  They don't have that one person working on the video camera and they need a specific time and the police request.   In order for me to file a police report, I need my serial number and IMEI number.  What I don't have.  I have the order number for the 6 2 s the iPhone more which have been delivered to me in Boston last September.  Help!

  I found the receipt for the phone.  Now I need the IMEI number for the police report.

• Time Machine and Motorola SB6141 cable Modem is to create an internet break

  I had a SB6141 since I got cable internet 1/2014.  I had hung by a former Airport Extreme Base Station - it was all good.  I bought a time machine from Apple refurb > 6 months ago but < 1 year ago.  I had injury disruptions of the internet - I only know when I try to access the internet and airport utility shows time machine ok, but the router cable not connected.   I called the cable company, the last time it happened, and they showed the line was ok and had me hang directly up to the cable modem to get online - and I did!  They think that the router is messed up.  Once I unplug everything and hang it up, everything is ok.  Sometimes it happens one or twice a day, sometimes not for a week, it's not rhyme or reason - anyone have any ideas?   Thank you, Mike George

  The SB6141 is a good modem, and airport Time Capsule is a good router. But they don't seem to work together that well for a number of users including me.

  Make your choice... keep the modem and try another router... or... keep the time Capsule and try another modem. As soon as you make your choice, the faster your chances for a reliable Internet connection.

  You are not alone in your problems.  Take a look at just a sample of other users who have posted the same question:

  https://discussions.Apple.com/search?q=sb6141

• Try to set up Time Machine, and I get this error; Keychain 100001 error while creating a system Keychain entry for the username "JGarrett" and the URL ' afp://JGarrett@JPG Capsule._afpovertcp._tcp.local./Data time airport.

  Have cleared airport Time Capsule and factory reset after getting this message.  Don't know where to go with it.

  Some files have a property incorrectly together which will prevent them from being changed or deleted when the system is running. This property cannot be removed in recovery mode. If you do not feel that you can do this yourself, please someone more experienced to help you get.

  1 back up all data. There are ways to back up a computer that is not fully functional. Ask if you need advice. Don't skip this step.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags norestricted /V*/*/L*/Keyc*/*

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo xattr -c /L*/Keyc*/*

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the same Terminal window. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.

  Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal. Test.

• at the same time production and measuring the pulse

  Hello everyone,

  I'm generates a pulse for specific time. Now, I want to measure within the same daq card. I've done Vi for him but he has an error. I have USB daq-6343. I enclose my Vi here.

  The problem is I am able to get pulses generated at PIN 6 PFI but reading Vi watch time-out error.

  I plugged the wire between PFI 1 pin and PFI 6 pins on the DAQ card.

  So please suggest me what to do to eliminate this error.

  Thanks & best regards,

  I just looked at your original vi, I had looked only at the most distant (corrected) a previously.  I don't see a good reason to read timeout error you have immediately.  Record of an error timeout on your attempt reading suggests that the code was executed without error so far, including the beginning of the generation of pulses.  That would leave wondering on physical cable connection or possibly some undesirable side effects caused by your cleanup code when you three States a PFI lines.

  The other issue was my suggestion to leave DAQmx Timing.vi outside of the configuration string entirely for cases like this where you only want to build a single pulse.  To be honest, it's a habit & practice I adopted a long time ago.  I thought one of the reasons was that the finished pulse trains required a minimum of 2 samples.  A bit of test code showed me that it isn't true, if my memory tells me there was a time when it * used * to be true.  I don't remember if I have errors or if the task has chosen to generate 2 pulses with just a warning, or something.  I just remember that, while he was working on a module that was supposed to be able to produce any number of pulses from 1 to N, I found that I wasn't actually able to support the case of 1 pulse by asking just 1 sample over sample mode.

  * Anyway *, the other reason to avoid sampling over for a single pulse mode is that in the past, this would consume actually 2 counters on DAQ cards.  Generated the pulse (s) while the other was a help that triggered the first to control the number of generated pulses.  It was unnecessary as you could * also * generate a single pulse leaving the DAQmx Timing.vi out of the config, a method that used only 1 meter.

  X-series cards (like yours) don't consume over 2 programmable counters of the user to generate finite pulse trains, so the lesson I learned a long time ago and was trying to convey is perhaps not so important in your case.  I recommend it even if you know that you will always generate a single pulse, simply because he considered the standard way to generate a single pulse (as seen in examples of navigation).

  -Kevin P

• How to find the sequence number of av

  Downloaded eset uninstaller, but he asked for the sequence number

  Hello Damien,.

  If you don't know, go to the icon of the program or file name and right-click on it and select properties and in the window that opens, read on the top row of tabs up until you get to the Details tab, click to open the tab. The sequence number is given here?

  If not, a freeware for you program called siw (System Information for Windows), download it here: http://download.cnet.com/SIW-Technician-s-Version/3000-2094_4-10915770.html . The application requires no installation, you simply double-click the name of the executable file, and the program opens to the software section. Scan down the list until you find the applications tab. Click to open your list and find details of eset and see if the sequence number is in the list.

  One of these two approaches should solve the problem for you. Let me know how you fare.

  Kind regards

  BearPup

• How to change the name of the ODI agent and port number

  I installed ODI standalone agent (11g) on a linux server.  We now realize that we need to change the name and port number of the agent.  Is it possible to change these or do we need to re - install odi agent?

  I know that I can change the name in the ODI, but I can't change the port number.  I would like everything to be consistent in all of our environments.  That's why we need to change the name of the agent and the port number.

  How do you start the agent? Which command you use to start?

  There are two ways, either by directly calling agent.bat and passing name agent and port don't start or you can run the sh/bat file created during installation (present in oracledi\agent\bin). The file name that is created should look like this (agent_localagent11g) where localagent11g is the name given during installation time and 'agent' is the prefix that was added by ODI.

  There is no configuration file to configure the port number and agent. Make sure that the port number and name you pass to agent.sh must match what is configured in odistudio.

  Agent.bat '-PORT = 20910 ""-NAME = localagent11g.

• several insert using the same sequence number,

  Hello

  I need to use the same sequence number in several documents (insertion).

  Is this possible and how?

  Thank you

  It depends on how you are doing multiple inserts.  If you then run a bunch of single inserts something like:

  dev1 > create table t (ID, descr varchar2 (10));

  Table created.

  dev1 > create sequence t_seq;

  Order of creation.

  dev1 > select double t_seq.nextval;

  NEXTVAL

  ----------

  1

  dev1 > insert into values t (t_seq.currval, 'Rec 1');

  1 line of creation.

  dev1 > insert into values t (t_seq.currval, "Rec 2");

  1 line of creation.

  dev1 > insert into values t (t_seq.currval, 'Rec 3');

  1 line of creation.

  dev1 > insert into values t (t_seq.currval, 'Rec 4');

  1 line of creation.

  dev1 > insert into values t (t_seq.currval, 'Rec 5');

  1 line of creation.

  dev1 > select * from t;

  ID DESCR

  ---------- ----------

  1 rec 1

  1 rec 2

  1 rec 3

  REC 2 4

  REC 2 5

  You can use a similar approach, if you select data from another table as long as you can make the selection sufficiently selective to retrieve only the lines you need.

  John

• How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Mr President.

  How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Concerning

  For the date, you can use groovy expression adf.currentDate to set the current date. reference http://adfgouravtkiet.blogspot.in/2012/11/how-to-set-default-values-for-entity.html

  You already have ways to use the sequence.

  How do you add a new value in the form. You're creating a new line of your page (user interface) and by engaging with validation operation? Unless you commit you will not be able to see anything in the table.

  Thank you