Time stamp indicator system?

Similar Questions

• Time Stamp Offset end playback TDMS

  I am having a problem with a PDM file playback and display a graphic in the shape of wave in LabVIEW.  My table of waveform display always the time with a negative offset of 18 000 samples.

  Who make it simple, let's say I'm sampling to 1000 samples per second, and I connect my PDM data. When I read that PDM and visualize my graphic waveform data, the chart display data read from DDHN 18 seconds earlier that the registered wf_start_time, set a deadline for the PDM.  If my wf_start_time is 08:00:20.000 AM 12/02/2014, then my waveform displays a start time of 08:00:02.000 AM 12/02/2014.  Even if I taste 4000 samples per second, my start time is disabled starting 4.5 seconds earlier.

  I put my Xscale.offset = wf_start_time it reads properly, but the start time on the waveform table is always false.

  Because I'm dealing with large TDMS files (500 MB +), I sometimes decimate the data to view it due to problems of memory. Here, this problem occurs again.  If I decimate the data to display only 1 out of every 10 data points, this offset is more changing by a factor of 10 x. ranging from 18 seconds to 180 seconds.

  Is this some sort of gap of stamp UTC/system clock time or something else?

  Looks like that I thought about it.  I copy - paste a previous screw waveform graph on a whim, I created a graph of waveform from scratch, and the lag problem has been eliminated.  It must have been an option or shift created in there that I couldn't see or modify.  But it's good now.

• bad time stamp difference. Why?

  Hi all

  I have a very intuitive when behavior time subtracting one from the other stamps. Can you tell me why 'hour' shows '1' where obviously '0' would be correct?

  

  Subtract the two time stamps as you are now.  Which feed a digital indicator.  Set the display format for this digital indicator be relative time.  There is a choice for days to hours and minutes that resembles % <%H:%M:%S> in the output format t advanced.  If you want to display days, so do % <%D:%H:%M:%S> t there is no need to mess with cords.

• seconds of falling for the time stamp

  I guess someone has had this problem before, but do not see in the forum anywhere.  I add a timestamp in a file so I used the 'get time in seconds' and connected to a "convert to DBL.  Then this son in an indicator on the façade and in the Express VI "write to a measurement file.

  The indicator shows the time stamp very well, but in the file it puts it in scientific notation and cut the last 4 digits and fractions of a second.  Timestamping writes to the file every 5 seconds, so it is important to have the rest of the time stamp included.  I tried using probes on wires to see where things are weird but I get the same value truncated in the wire before and after the flag.  I thought it had something to do with the VI Express first, given that the indicator is fine, but with her truncated in the thread, it seems that the Express VI is indeed record exactly what is given to... but then again the indicator... you can see that I've been running in circles in this!  Someone knows the reason why he does this and a possible solution?

  Thank you very much!

  
  

• Dialog control stamp kills system Exec.vi!

  Hello!

  I have just a really strange behavior in my application. I managed to narrow it down to a much smaller VI, please don't look at the framework, but the real problem, this test of the vi MAIN looks like this because it's a skeleton of an application more great (I had to remove a lot of relevant and confidential parts).

  So. I have a relay for monitoring USB from a 3rd party company that I use in my application via a supplied EXE perfectly. I call this exe in LabVIEW using the Exec.vi system and it works perfectly and watchdog functions as it should. However, I see a strange bug (?): if I run a browser control Time stamp dialog window, it "suspends" somehow the Exec.vi system. If my watchdog command stops setting, open relay, problem!

  I compressed my test application, and I can reproduce this same problem, although I have just called a BREAK to gain control of command line. Note that, in my real application, the control of time stamp is in another, said dynamically (call and forget the method) VI, but I get the same bug!

  Steps to reproduce the bug:

  1. launch my app
  2. observe that the iteration of the loop at the bottom
  3. Click browser control time to bring up the dialog window.
  4. You can see the background loop iteration has stopped (iterations of the loop DAQ)
  5. If you close the dialog box, the background loop continues execution

  What the heck is this?

  How this is possible, why there is "interference" between a completely separate control and a loop of low system Exec.vi?

  Thanks for any suggestions!

  I hide in my real application, as a solution, just the element browser control time stamp...

  LabVIEW is a software component called root loop which is used by different parts of the LV. opening dialogue blocks the loop of the root, which is probably what is blocking the DLL called inside the exec system VI. Probably, you will be able to do as opening a menu and leaving open.

  You can do a search for the term to learn more on this subject, but I don't think it's all you can really do about it.

• How to date and time stamp picture my photo printed folder

  How can I sign up date and time on my impressions from my picture folder?

  How can I sign up date and time on my impressions from my picture folder?

  ==========================================
  The following instructions will prepare photos
  with the EXIF Date/time stamp then you can print
  them.

  FastStone Image Viewer freeware can add
  EXIF Date/time in the face of your photos in a batch.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm
  (Windows XP / Vista / 7)

  I suggest that you create a new folder and add
  copies of your photos for experimental purposes.
  If you are unhappy with the result your originals
  will be intact.

  After FastStone is downloaded and installed...
  Open the program and go...

  Tools / open the Batch Conversion / tab Batch convert...

  Check the box... Use of advanced options...

  Advanced Options button / tab text.
  Check the box... Add text...

  (You will need to experiment with the position and the police
  size and color to get the desired result.)
  (the text size will need to be adjusted according to the)
  the size of the photos)

  Open the window drop... "Insert a Variable."
  choose... EXIF Date Time / Date and time...
  (in the white field you should see ($H1)
  Left click... Ok

  On the Batch tab convert... in the left field...
  Left click the square button "select the Source folder.
  Find and select the photos you want to
  Add.

  Left, click on the Add button to move the files to
  the right field.

  Choose an output Format...

  Choose an output folder...

  Click on the button convert...

  It's much easier to do than to explain then
  give it a try before say you "Good Grief... it's too
  a lot of work.

• Event ID: 1000 Faulting application devenv.exe, version 8.0.50727.762, stamp 45716759, failed module gdiplus.dll, version 5.2.6001.22319, time stamp 4a841b37, debug? 0, address of failure 0x0001bf5e

  My repeateedly of crash of visual studio 2005 in 10-20 minutes

  with the following error

  Event ID: 1000

  Failing application devenv.exe, version 8.0.50727.762, time stamp 45716759, failed module gdiplus.dll, version 5.2.6001.22319, time stamp 4a841b37, debug? 0, address failure 0x0001bf5e.

  Event ID: 1023

  .NET runtime version 2.0.50727.3615 - engine error fatal execution (7A2E1122) (0)

  Hi ashnov,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  Method 1

  I suggest that you install the updated drivers for the graphics card on the computer by visiting the card manufacturer or the manufacturer of the computer Web site to download and install the drivers, check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Method 2

  If the previous step fails, then I suggest that you do the system restore and check if it works.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 3

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 4

  If the steps above fail, then reinstall the program and check if that helps.

• How can I print my photos displaying the date and time stamp

  I have pictures in a legal context but do not understand how to print them displaying the date and time stamp.  The timbre of the date and time are necessary for me to present my case exactly.  Can someone tell me how to print with these marks.

  Thank you

  The following instructions will prepare photos
  with the EXIF Date/time stamp then you can print
  them.

  FastStone Image Viewer freeware can add
  EXIF Date/time in the face of your photos in a batch.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm
  (Windows XP / Vista / 7)

  I suggest that you create a new folder and add
  copies of your photos for experimental purposes.
  If you are unhappy with the result your originals
  will be intact.

  After FastStone is downloaded and installed...
  Open the program and go...

  Tools / open the Batch Conversion / tab Batch convert...

  Check the box... Use of advanced options...

  Advanced Options button / tab text.
  Check the box... Add text...

  (You will need to experiment with the position and the police
  size and color to get the desired result.)
  (the text size will need to be adjusted according to the)
  the size of the photos)

  Open the window drop... "Insert a Variable."
  choose... EXIF Date Time / Date and time...
  (in the white field you should see ($H1)
  Left click... Ok

  On the Batch tab convert... in the left field...
  Left click the square button "select the Source folder.
  Find and select the photos you want to
  Add.

  Left, click on the Add button to move the files to
  the right field.

  Choose an output Format...

  Choose an output folder...

  Click on the button convert...

  It's much easier to do than to explain then
  give it a try before say you "Good Grief... it's too
  a lot of work.

• Windows 7 says that's not true, after being installed for some time. Does system restore or recovery.

  I installed Windows 7 Home Premium 64-bit for system integrators that I purchased from newegg. It has been installed since April / May and worked fine until now. I've tried some other solutions to this problem, and none of them seemed to work for me. Here are the diagnostic information.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc0000022
  Windows product key: *-* - 2V8MX - 6W6FY-QV9G3
  Windows product key hash: 7OKQvU3zqMLEBwJbyNvbLLvP9E = +
  Windows product ID: 00359-OEM-8702173-90703
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {2726D545-3F1A-4942-8A34-5F2FE1E20DAC} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_gdr.100618 - 1621
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 103 blocked VLK
  Microsoft Office Enterprise 2007 - 103 blocked VLK
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100

  Other data-->
  Office details: {2726D545-3F1A-4942-8A34-5F2FE1E20DAC}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-QV9G33S-1-5-21-57199979-1290623787-413427169the system manufacturer,System Product NameAmerican Megatrends Inc. 00359-OEM-8702173-90703 0901 20100208000000.000000 + 0009FBA3607018400FA04090409Eastern Standard Time(GMT-05:00)03103103Microsoft Office Enterprise 200712fFic3JgCreGGRxyF8uMWB4R4Jcg =89388-707-1528066-6586414 ACD7202654E586

  Content Spsys.log: 0 x 80070002

  License data-->
  On a computer running Microsoft Windows non-core, run ' slui.exe 0x2a 0 x 80070426' to display the error text. "
  Error: 0x80070426

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID of Hash: OAAAAAIABgABAAEAAAABAAAAAgABAAEA6GEWutKcVIAGnlwaRpDEtVTyEDNWG6x3zu52JZJjQOk =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1147 APIC 020810
  FACP 020810 FACP1147
  HPET 020810 OEMHPET
  MCFG 020810 OEMMCFG
  020810 OEMB1147 LASRYVITRAGE
  SSDT A M I POWERNOW

  OK, I reinstalled Windows 7 and that fixed my problem. Thanks for your help.

• How can I set a time stamp for the setCreationDate(Date value)?

  Hi all

  My underlying database column has a DATE data type that needs of the data and the time stamp. When you use the following code to set a date for setCreationDate(Date value) the date is set, but there is no timestamp.

  Here is the code:

  protected void create (AttributeList attributeList) {}

  Super.Create (AttributeList);

  Begin

  Date currentDate = new Date();

  DATE creationDate = currentDate.getCurrentDate ();

  setCreationDate ((Date) creationDate);

  End

  }

  Can't wait to hear.

  James

  java.sql.Timestamp timeStamp = new java.sql.Timestamp (System.currentTimeMillis ());

  dateTime oracle.jbo.domain.Date = new oracle.jbo.domain.Date (timeStamp);

• overloading a DATE with time STAMP function to avoid the "too many declarations.

  CREATE OR REPLACE PACKAGE util
  AS
    FUNCTION yn (bool IN BOOLEAN)
      RETURN CHAR;
  
    FUNCTION is_same(a varchar2, b varchar2)
      RETURN BOOLEAN;
  
    FUNCTION is_same(a date, b date)
      RETURN BOOLEAN;
  
    /* Oracle's documentation says that you cannot overload subprograms
     * that have the same type family for the arguments.  But, 
     * apparently timestamp and date are in different type families,
     * even though Oracle's documentation says they are in the same one.
     * If we don't create a specific overloaded function for timestamp,
     * and for timestamp with time zone, we get "too many declarations 
     * of is_same match" when we try to call is_same for timestamps.
     */
    FUNCTION is_same(a timestamp, b timestamp)
      RETURN BOOLEAN;
  
    FUNCTION is_same(a timestamp with time zone, b timestamp with time zone)
      RETURN BOOLEAN;
  
    /* These two do indeed cause problems, although there are no errors when we compile the package.  Why no errors here? */
    FUNCTION is_same(a integer, b integer) return boolean;
  
    FUNCTION is_same(a real, b real) return boolean;
  
  END util;
  /
  
  CREATE OR REPLACE PACKAGE BODY util
  AS
    /********************************************************************************
       NAME: yn
       PURPOSE: pass in a boolean, get back a Y or N
    ********************************************************************************/
    FUNCTION yn (bool IN BOOLEAN)
      RETURN CHAR
    IS
    BEGIN
      IF bool
      THEN
        RETURN 'Y';
      END IF;
  
      RETURN 'N';
    END yn;
  
    /********************************************************************************
       NAME: is_same
       PURPOSE: pass in two values, get back a boolean indicating whether they are
                the same.  Two nulls = true with this function.
    ********************************************************************************/
    FUNCTION is_same(a in varchar2, b in varchar2)
      RETURN BOOLEAN
    IS
      bool boolean := false;
    BEGIN
      IF a IS NULL and b IS NULL THEN bool := true;
      -- explicitly set this to false if exactly one arg is null
      ELSIF a is NULL or b IS NULL then bool := false;
      ELSE bool := a = b;
      END IF;
      RETURN bool;
    END is_same;
  
    FUNCTION is_same(a in date, b in date)
      RETURN BOOLEAN
    IS
      bool boolean := false;
    BEGIN
      IF a IS NULL and b IS NULL THEN bool := true;
      -- explicitly set this to false if exactly one arg is null
      ELSIF a is NULL or b IS NULL then bool := false;
      ELSE bool := a = b;
      END IF;
      RETURN bool;
    END is_same;
    
    FUNCTION is_same(a in timestamp, b in timestamp)
      RETURN BOOLEAN
    IS
      bool boolean := false;
    BEGIN
      IF a IS NULL and b IS NULL THEN bool := true;
      -- explicitly set this to false if exactly one arg is null
      ELSIF a is NULL or b IS NULL then bool := false;
      ELSE bool := a = b;
      END IF;
      RETURN bool;
    END is_same;
  
    FUNCTION is_same(a in timestamp with time zone, b in timestamp with time zone)
      RETURN BOOLEAN
    IS
      bool boolean := false;
    BEGIN
      IF a IS NULL and b IS NULL THEN bool := true;
      -- explicitly set this to false if exactly one arg is null
      ELSIF a is NULL or b IS NULL then bool := false;
      ELSE bool := a = b;
      END IF;
      RETURN bool;
    END is_same;
  
    /* Don't bother to fully implement these two, as they'll just cause errors at run time anyway */
    FUNCTION is_same(a integer, b integer) return boolean is begin return false; end;
    FUNCTION is_same(a real, b real) return boolean is begin return false; end;
    
  END util;
  /
  
  declare
   d1 date := timestamp '2011-02-15 13:14:15';
   d2 date;
   t timestamp := timestamp '2011-02-15 13:14:15';
   t2 timestamp;
   a varchar2(10);
   n real := 1;
   n2 real;
  begin
   dbms_output.put_line('dates');
   dbms_output.put_line(util.yn(util.is_same(d2,d2) ));
   dbms_output.put_line(util.yn(util.is_same(d1,d2) ));
   dbms_output.put_line('timestamps'); -- why don't these throw exception?
   dbms_output.put_line(util.yn(util.is_same(t2,t2) ));
   dbms_output.put_line(util.yn(util.is_same(t,t2) ));
   dbms_output.put_line('varchars');
   dbms_output.put_line(util.yn(util.is_same(a,a)));
   dbms_output.put_line(util.yn(util.is_same(a,'a')));
   dbms_output.put_line('numbers');
   -- dbms_output.put_line(util.yn(util.is_same(n,n2))); -- this would throw an exception
  end;
  /

  Originally, I had just the a function with the arguments of VARCHAR2. It worked not correctly because when the dates were gone, the automatic conversion into VARCHAR2 lowered the timestamp. So, I added a 2nd function with the arguments to DATE. Then I started to get "too many declarations of is_same exist" error during the passage of time stamps. This made no sense to me, so, although documentation Oracle says you can't do this, I created a 3rd version of the function, to manage the TIMESTAMPS explicitly. Surprisingly, it works fine. But then I noticed that he did not work with TIMESTAMP with time zones. Therefore, the fourth version of the function. Docs of the Oracle say that if your arguments are of the same family, you can't create an overloaded function, but in the example above shows, it's very bad.
  
  Finally, just for grins, I created the functions of number two, one number, the other with REAL and even these are allowed - they are compiled. But then, at runtime, it fails. I'm really confused.
  
  Here's the apparently erroneous Oracle documentation on this subject: http://docs.oracle.com/cd/B12037_01/appdev.101/b10807/08_subs.htm (see overload subprogram names) and here are the different types and their families: http://docs.oracle.com/cd/E11882_01/appdev.112/e17126/predefined.htm.
  
  Published by: hot water on 9 January 2013 15:38
  
  Published by: hot water on 9 January 2013 15:46

  >
  So, I added a 2nd function with the arguments to DATE. Then I started to get "too many declarations of is_same exist" error during the passage of time stamps. It makes no sense for me
  >
  This is because when you pass a TIMESTAMP Oracle cannot determine whether to implicitly convert to VARCHAR2 and use your first function or implicitly convert to DATE and use your second function. Where the "too many declarations" error exist.
  >
  , even if said Oracle documentation you can not do, so I created a 3rd version of the function to manage the TIMESTAMPS explicitly. Surprisingly, it works fine. But then I noticed that he did not work with TIMESTAMP with time zones.
  >
  Perhaps due to another error "too many declarations? Because now, there will be THREE possible implicit conversions that might be made.
  >
  Therefore, the fourth version of the function. Docs of the Oracle say that if your arguments are of the same family, you can't create an overloaded function, but in the example above shows, it's very bad.
  >
  I think that the documentation, of the family of 'date', is wrong as you suggest. For WHOLE and REAL, the problem is that those are the ANSI data types and are really the same Oracle data type; they are more like "alias" that different data types.

  See the doc of SQL language
  >
  ANSI SQL/DS and DB2 data types

  The SQL statements that create tables and clusters allows also ANSI data types and products IBM SQL/DS and DB2 data types. Oracle recognizes the ANSI or IBM data type name that differs from the Oracle database data type name. It converts the data type for the equivalent Oracle data type, stores the Oracle data type under the name of the column data type and stores the data in the column in the data type Oracle based on the conversions listed in the following tables.

  INTEGER NUMBER

  INT

  SMALLINT
  NUMBER (38)

  FLOAT (Note b)

  DOUBLE-PRECISION (Note c)

  REAL (Note d)
  FLOAT (126)

  FLOAT (126)

  FLOAT (63)

• CQL join with 2-channel time-stamped application

  Hello
  
  I am trying to join the two channels that are time-stamped application, both are total-ordered. Each of these 2 channels retrieve data in a table source.
  
  The EPN is something like this:
  
  Table A-> processor A-> A channels->
  JoinProcessor-> channel C
  Table B-> processor B-> B-> channel
  
  My question is, how are "simulated" in the processor events? The first event that happens in any channel and the Treaty as the timestamp, starting point get it? Or fact block treatment until all channels have published its first event?
  
  Channel A
  --------------
  timestamp
  1000
  6000
  
  
  Channel B
  -------------
  timestamp
  4000
  12000
  
  Channel B arrived both of system a little later due to the performance of the db,
  
  I would like to know if the following query won't work, whereas I would like to match the elements of channel A and B which are 10 sec window and out matches once in a stream.
  
  The following query is correct?
  
  Select a.*
  A [here], B [slide 10 seconds of range 10 seconds]
  WHERE a.property = b.property
  
  
  I'm having a hard time to produce results of the join well I checked the time stamp of application on each stream and they are correct.
  What could possibly cause this?
  
  Thank you!
  
  Published by: Jarell March 17, 2011 03:19
  
  Published by: Jarell March 17, 2011 03:19

  Hi Jarrell,

  I went through your project that had sent you to Andy.

  In my opinion, the following query should meet your needs-

  ISTREAM (select t.aparty, TrafficaSender [range 15 seconds] t.bparty t, CatSender [range 15 seconds] c where t.aparty = c.party AND t.bparty = c.bparty)

  I used the test of CatSender and TrafficaSender data (I show only the part bparty fields and here and that too as the last 4 characters of each)

  TrafficaSender (, bparty)
  At t = 3 seconds, (9201, 9900)
  At t = 14 seconds (9200, 9909)
  To t = 28 seconds (9202, 9901)

  CatSender (, bparty)
  At t = 16 seconds, (9200, 9909)
  At t = 29 seconds (9202, 9901)

  For query q1 ISTREAM = (select t.aparty, TrafficaSender [range 15 seconds] t.bparty t, CatSender [range 15 seconds] c where t.aparty = c.party AND t.bparty = c.bparty)

  the results were-
  At t = 16 seconds, (9200, 9909)
  At t = 29 seconds (9202, 9901)

  and it seems OK for me

  Please note the following-

  (1) in the query above I do NOT require a "abs1(t.ELEMENT_TIME-c.ELEMENT_TIME)".<= 15000"="" in="" the="" where="" clause.="" this="" is="" because="" of="" the="" way="" the="" cql="" model="" correlates="" 2="" (or="" more)="" relations="" (in="" a="" join).="" time="" is="" implicit="" in="" this="" correlation="" --="" here="" is="" a="" more="" detailed="">

  In the above query, either W1 that designating the window TrafficaSender [range 15] and W2 means the CatSender [range 15] window.

  Now both W1 and W2 are evaluated to CQL Relations since in the CQL model WINDOW operation over a Creek gives a relationship.

  Let us look at the States of these two relationships over time

  W1 (0) = W2 (0) = {} / * empty * /.
  ... the same empty up to t = 2
  W1 (3) = {(9201, 9900)}, W2 (3) = {}
  same content for W1 and W2 until t = 13
  W1 (14) = {9201 (9900) (9200, 9909)}, W2 (14) = {}
  same content at t = 15
  W1 (16) = {9201 (9900) (9200, 9909)}, W2 (16) = {(9200, 9909)}
  same content at t = 17
  W1 (18) = {(9200, 9909)}, W2 (18) = {(9200, 9909)}
  same content at up to t = 27
  W1 (28) = {(9200, 9909), (9202, 9901)}, W2 (28) = {(9200, 9909)}
  W1 (29) = {(9202, 9901)}, W2 (29) = {(9200, 9909), (9202, 9901)}

  Now, the result.
  Let R = select t.aparty, TrafficaSender [range 15 seconds] t.bparty t, CatSender [range 15 seconds] c where t.aparty = c.party AND t.bparty = c.bparty

  It is the part of the application without the ISTREAM. R corresponds to a relationship since JOINING the 2 relationships (W1 and W2 in this case) that takes a relationship according to the CQL model.

  Now, here's the most important point about the correlation in the JOINTS and the implicit time role. R (t) is obtained by joining the (t) W1 and W2 (t). So using this, we must work the content of R over time

  R (0) = JOIN of W1 (0), W2 (0) = {}
  the same content up to t = 15, since the W2 is empty until W2 (15)
  R (16) = JOIN of W1 (16), W2 (16) = {(9200, 9909)}
  same content up to t = 28, even if at t = 18 and t = 28 W1 changes, these changes do not influence the result of the JOIN
  R (29) = JOIN of W1 (29), W2 (29) = {(9202, 9901)}

  Now the actual query is ISTREAM (R). As Alex has explained in the previous post, ISTREAM leads a stream where each Member in the difference r (t) - R (t-1) is associated with the t. timestamp applying this to R above, we get

  R (t) - R (t-1) is empty until t = 15
  (16) R - R (16 seconds - 1 nanosecond) = (9200, 9909) associated with timestamp = 16 seconds
  R (t) - R (t-1) is again empty until t = 29
  (29) R - R (29 seconds - 1 nanosecond) = (9202, 9901) associated with timestamp = 29 seconds

  This explains the output

• Why Tbird uses a different time from the time of my system?

  Thunderbird is assign a time to my messages is 8 hours later in time in my operating system (which is correct). Why and how fix it?

  The time on your system clock could be correct, but I bet that if you make sure you're on the wrong time zone.

• Script Automator for the DATE and TIME stamped record

  Hi all

  I'm not a scripter, but are in need of a DATE and time-STAMPED folder (or file) I would like to put on my desktop and have updated automatically so that I can use this tool to quickly see if a backup external (or internal) is current. probably I could also use it to quickly find out how /old/ a backup is.

  for now, I do this manually if I want to quickly verify that a backup works by creating a "date named folder" on the desktop - such as '-2016 03 26 "."» so I can quickly see if a backup I just ran ran.

  I have a lot of backups (internal, external, off site, etc.) and it would be super useful for me to have.

  I consider the name of the folder to be customizable (potentially) in case I need to change it, but a good default would be "-YEAR MONTH DAY" so that I could see easily when this backup has been but also I name my files in this way so they can appear in chronological order "."

  is anyone able to help me with something like that or suggest another forum for cross-post this?

  Thank you

  Jon

  Hello

  Create the the ""new folder " action, like this:"

  

  ---------------

  Drag and drop the 'Shell Script' variable in the "name:" field.

  

  --------------

  Double click on the variable in the "name:" field:

  Copy and paste this text in the field 'Script ':

  date "+%Y %m %d"
  

• Time-stamped comments adding in a DDHN file during logging

  I'm trying to find the best way to add comments in a DDHN file during logging.  I know that the fragmentation occurs when the properties are written for TDMS logging.  Should I write comments in the level in the logging file (maybe a case of Structure fires when a new comment occurs) or is there another way to incorporate comments into a DDHN file during logging that I'm missing?  Any help would be appreciated.

  Nathan, do you really care about fragmentation? If this isn't the case, you could do it just like that. If you really care fragmantation, you could write Time-Stamped comments in a separate file, PDM, or any, Time-Stamped cache and write cached put comments in the PDM file after cutting.