time to change
Hello everyone
I am doing a labview program that enregisrte of change of a variable sring by remembering its former value! and I wanted to save also time spent between these two changes!
the value tavbleau is displayed normally but I can not determinant the time between these two event!
then I wanted United Nations button clear table of RAZ for responsibility!
Here's my attached schedule
Thanks for your help
If your typing even a string again, then he used to add it to your table. If you don't want then remove the selector of the case.
Tags: NI Software
Similar Questions
-
My last two routers in Apple both lasted 14 months more I had an arrival of DAO. Of course, both just went out of warranty. My current A.E. seems must be reset to zero every day even if it is shows that it works, my devices loose their connection. Rebooting solves the problem for a short period. Hard and soft resets it have done and that does not help. Now, the yellow light flashes and the utility Airport says that it may be overheating. I just it's time to change brands.
Your Apple router is covered by the Applecare, extended warranty on a computer, ipad, or apple TV.
The program is quite generous... you can buy an apple TV now (Gen3 is fine) and buy on what is cheap apple care. It covers all airport bought up to 2 years earlier. So take your defective AE at the apple store... Buy Apple TV and its applecare... do not open the Apple TV... Get your replaced AE... Then, get a refund on your Apple TV. It's a little sneaky, but only if you don't have applecare...
In the European Union or many other countries... There are in your laws of the consumer that Apple must meet the provisions of warranty... And 14 duration of life is not good enough.
There are many problems with the current series of AE and TC.
Constantly wireless of does not... power outages of power.
My first TC was like yours... not quite DOA, but it was defective out of the box and lasted a week total.
Secondly, one was poor wireless. My oldest Gen5 AE and Gen4 TC have been much faster.
Third go was very well. (At least on this point).
If you want something better watch the top selections here. You will find the AE list... a long long way down.
http://www.SmallNetBuilder.com/tools/charts/router/bar/113-5-GHz-DN-c
-
HP4530s: HP4530s - time to change the thermal paste
Hi all
can you please help me to decide if now is the time to change the thermal paste on my processor on laptop HP 4530 s. I have this laptop for almost 5 years now and lately I noticed significant overheting. Of course, the fan is always on. Home, take a look at the screenshot of Speedfan application. As you can see Core 0 (I guess that's the CPU and sometimes reaches more than 60 ° C).
Since the fan was cleaned not so long time ago, I thought I'd give laptop to some experts to disassemble, remove the radiator and change the thermal paste. I've seen many of these videos on you tube.
I have win 7 pro installed on this laptop and is mostly used for surfing the web, MS office and youtube.
What is your opinion?
Thank you!
Thank you for your help Hüffer. I also found on many places that these temperatures are almost normal. However, given that the laptop is almost five years I decided nevertheless to change thermal past and for cleaning the air in detail.
Is there not a lot of dust in the fan or heat sink. My firend exchanged thermal paste and after the test, the results are given in the following picture. Core0 temperature never exceeds 50 C. The test is carried out after an hour with the same content to youtube. The lapopt is not really hot on the side left (where are placed HDD and the heatsink) more. I think it was the right thing to do, something like a review.
-
Why my computer date and time keep changing to 01/01/2003
I change the date and time of my lap top, according to the laptop for a while and turn on the date and time continue to change to 01/01/2003. I have not so much time to change, but... his problem keeps up to date of the.
Looks like your laptop CMOS battery needs to be replaced. It is not the same battery that powers your laptop. It is usually a battery of lithium-manganese dioxide of small coin shaped that resemble the shows big battery. You should consult your instructions of the manufacturer on how to access and what type of battery is needed to replace it.
A simple call to your computer manufacturer should provide all the necessary information.
Brent
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello
Lately, I have a problem with my vista sp2. The exact time is 29 March 2013 12:23 AM. Yet, if I stop vista for an hour or more, when I restart the PC time system strangely transformed in March 11, 12:00. I have reset on the exact time, but if I stopped it, it will change again for another time, say 2 agusts 2013 23:00, and so on.
I if it stops and it reboot after a few minutes, the time is correct.
Comprehensive analysis of MSE can't find anything.
I am confused, can someone help me?
Thank you
Low battery can keep the date and the time of change of random dates and the times. The information you have provided your motherboard is six years old (and the battery was built before the motherboard), two scanners showed no malware, so I think it's time to replace the battery.
Jim
-
Why every time I change my desktop backgroung, Farmscapes keeps opening game?
I put my desktop backgroung change every 5 min and when this happens, the agricultural landscape opens instantly. What can I do to make Farmscapes not to open every time I change my office? I have Windows 7.
Farmscapes (Game)
I don't know what it is?
Uninstall or disable if it was a windows game.
-
I try to install my Adobe Acrobat 9 on a newly purchased computer, but getting the message that my serial No. is not valid. I faced the problem of the last time I changed my PC, but Adobe offers support.
Acrobat 9 is not compatible with the current operating system, which is probably the reason why they don't support you, but they still let you know if your s/n is valid or not... Try to contact them again and ask for this information.
-
Using AS2 to get the time and change according to result
I need to make any changes to a flash projector which was built recently that changes of what is played according to the time of day. It is used to announce the breakfast or lunch/dinner for a restaurant. Previously we had put in place so that the time change happened at 5 in the morning and 10 o'clock in the morning. The code is below. The restaurant wants to change the time switch to be now at the half. I know how to extract the hours and minutes to do.
This is the code that I've been using
var currentHours:Date = new Date();var currentMin:Date = new Date();timeInHours = currentHours.getHours ();timeInMin = currentMin.getMinutes ();var today: Date = new Date();shownow = now.setMilliseconds;If (timeInHours > 4 & & timeInHours < 11) {}breakfast_mc._visible = true;breakfast_mc.play ();dinner_mc._visible = false;dinner_mc.stop() ;/ / trace (timeInHours);} else {}breakfast_mc._visible = false;breakfast_mc.stop ();dinner_mc._visible = true;dinner_mc.play() ;/ / trace (timeInHours);}trace (timeInHours);trace (timeInMin);Stop();Clips of film of breakfast and dinner have this code in them, as well as at the end of each cycle, it checks the time and switches.I found this code on Flash Kit, and wanted to try to change it, my hope, was so that he could generate a delay of 24 hours 1604 or 1029 I could then do a comparison <>/ with, but this function adds the numbers then 16:15 = 31 and 12:19 = 31 also. Does anyone have any suggestions on how I can do this? I need time to change at 05:00 and 10:30. There is a possibility that they will want to extend out to include the day of the week as well. Now I just need the fractional hours for works well.function checkTime(){dat var = new Date() ;var h = dat.getHours (); / / 24-hour format is already...mn var = dat.getMinutes ();/ turn to the last limit of 15 minutes ///mn = Math.floor (minutes/15) * 15;/ / OPTIONAL - add zeros to the hour and minuteif (hr < 10)hr = "0" + hr;if (mn < 10)mn = "0" + mn; / / remove these last 4 lines if the zeros not significant not due notretour hr + mn ;}usage example:time = checkTime();trace (time);Any suggestions are welcome. Thanks in advance!If you want to do something when the user time is between 05:00 and 10:30, use:
var d: Date = new Date();
If ((d.getHours () > = 5 & d.getHours ()))<10) ||(d.gethours()="">10)><>
No matter what
}
-
Date and time of change of batch
Mac running El Capitan with the latest version of Photo
When I try to batch change date and time on some old 50 photos that have been digitized on days different and downloaded in the library of my pictures the results aren't good. The days and hours can vary a lot.
When I checked and changed a lot of photos that have been taken or analyzed the day everything seems to work fine. Why? Is there a simple work around?
If you do not change the dates butare, added dates for digital photographs (Digital Photos do not have EXIF/IPTC data then do not use the control change time data - using the user script Script: batch change Date and time on a fixed Date )
LN
-
I keep changing my homepage from Yahoo, but it keeps going back to Firefox Homepage each time that I open it again my browser.
It's strange. You have a program named Advanced SystemCare? Some users have reported that it has a function of protection of homepage that you should turn off in order to change your home page.
If that does not apply to your system, could you review this support article and see if anything here helps you: How to fix preferences that will not save.
A little luck?
-
date and time to the 05/12/2013 times randomly changes
After that I updated to El Capitan (it seems) on my iMac. My date and time system randomly change the incorrect time and back to 05/12/2013. I see nothing tripping in particular. Just all of a sudden my browser does not open a page... etc. I have open system preferences, click "date and time", click on the padlock to open, enter my password and it immediately changes back up to the exact date and the second that it is free time. I can't reset it for me. I tried to leave the bolt open, unchecking the checkbox "do this automatically" & leaving auto. Can anyone offer any suggestions as to why and how to solve this problem, please? Thank you
Please, back up all data before proceeding.
Triple-click anywhere in the line below on this page to select this option:
/Library/LaunchDaemons/com.lsreset.plist
Right-click or Ctrl-click on the highlighted line and select
Services ▹ reveal in Finder (or just to reveal)
of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. You may be prompted for administrator login password. Restart the computer and empty the trash.
* If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
-
Tab control - lasts a long time to change between tabs
Hello world
I use a tab control to display a set of results in each tab. So, I have a tab with three legs and each leg consists of 16 indicators that are updated with the values. Now, when I run the program, it takes a long time to switch between these tabs. For example, if I am currently at Page 1 and then I click on Page 2, it takes about 5 seconds to change the tab. I know this must be like that, but I don't understand what is happening.
I need help, please. I know it's a silly question, but I can't make heads or tails of it!
Thank you!
It takes me about one second for the tabs to switch when it is in edit mode.
But I notice that you have grouped with other elements tab control. Any reason?
When I separated from this group so that the tab control was its own entity, between tabs was much faster.
-
Real-time target - change IP and shared network varables
Hello
I create an application for the system in time real (Compact RIO).
All data between the (current running on a windows PC-based) GUI and the real time system - is transferred via shared network variables.
Shared variables are hosted on the target.
I attributed the static IP address to the real-time target.
Now for the question:
After the deployment of the application in real time on the Rio target compact
If I change the IP address of the target: how the shared variables 'know' to connect to the target?
There is no place in the GUI (running on windows PC based) I set the IP address of the target.
So I change the IP Address of the target (and for the sake of argument if I change the IP address of the PC, but they are always on the same subnet) - how to 'know' how to connect?
Looks like a basic question I am absolutely certain I'm missing something to understand shared variable...
Thnaks
Hello Hazkel,
The IP address of your shared time variable real target is located in the *.aliases file when you create an executable file, you will need to change there. See the example below:
-
I've been using Money 2006 microsoft since it was new - I for some reason forgotten the password to log my money after all these years. I went through the section "you forgot your password" to reset but the password no longer works. I thought I did it wrong, but it have now changed over 8 times & still I can't log - I need to update my operations banking etc. but can not connect. It's very frustrating. I even tried to set up a new account, but he wants the same email I used since 2006 to open a session.
Please help me understand this. I really need to update my bank details soon.
Thank you.
Carol
E-mail address is removed from the privacy *.
Ask the question in the forums of money:
http://social.Microsoft.com/forums/en-us/category/money -
Why time keep changing on my computer
whenever I turn on the date and time of comp has changed...
free Wi - Fi now must be done manually
whenever I turn on the date and time of comp has changed...
You need to replace your CMOS battery.
---
Maybe you are looking for
-
When I add a 440 MB MP4 to iDVD, the draft blowing up 2.93 GB. How can I reduce this size so I can get a handful of these movies on dvd?
-
Stream of 6537 s on the drive with another card as well.
Hello, we are planning to have a platform that has 3 PXI 6537 s and another card for playback of a sync signal (North Atlantic Instruments 75 3). We capture cards PXI 10 MHz and the 3 75 between 10 and 20 Hz, regardless if we taste a bit faster than
-
windows server 2012 essentials disk partitions
I am to evaluate Windows Server 2012 Essentials for customers to small businesses. I use the trial version for testing purposes. My test server is a motherboard Intel S2600CP4, Intel P4000 chassis, E5-2630 CPU Xeon, Intel RS2BL080 RAID controller wit
-
I live in Indianapolis and only 5 school are listed in my city. But it is very difficult to use this rebate if your school is not listed.
-
I' year always tring to deal with things and when I'am doing something on my computer, I get interruptied or I get a warning to not respond on my screen and it upsets me to point my computer turing. I ' am 66 years old and not all patientabout be put