Time to stop buying Dell

Similar Questions

• Time executable stopped working

  Last week, I started getting a message error at startup which said 'time executable stopped working. In the forum, I noticed that others had the same problem. Using msconfig and by disabling some startup (by the process of elimination) items, I've isolated the problem to a file called DLCGCATS. Although I stopped now that file to load (and the creation of the error window), I want to fix it or remove it completely. How can I do? The manufacturer is listed as 'Unknown' and the command for the file is "rundll32 C:\windows\system32\spool\DRIVERS\W32X86\3\DLCGtime.dll, _RunDLLEntry@16. Your help to help me repair or remove this program would be greatly appreciated.

  The solution is:

  1. start-> run > MSCONFIG-> startup.

  2. find the DLCGCATS file and uncheck (disable).

  3 re-boot.

  4 problem disappears at startup

  Please note this file belongs to Dell and I believe that they have granted a new driver that will also solve the problem. Be sure to update all of your drivers if you are using a Dell PC.

• DO NOT BUY DELL, DELL IS A THIEF, DELL TOOK MY MONEY AND NEVER SEND MY PRODUCT!

  DELL IS A THIEF... DELL WILL TAKE YOUR MONEY AND DO NOT SEND YOUR PRODUCT... DO NOT BUY DELL!  I WILL NEVER BUY AN ANOTHER DELL PRODUCT AS LONG AS I SCREW!

  I recently bought replacement ink for my Dell which came to a total of $72.42.  Dell took my money and I never received my 3 ink cartridges. When I called in 2 weeks to say that I never received my cartridges to Dell, Dell told me I was too late; they couldn't do something.  When I asked to speak to a supervisor, the representative hung up on me (three times Dell hung up when I reminded).  I barely understand foreigners they have work for them in India and God knows where else... Dell still has my money, but I don't have the product.   Dell is a THIEF... I repeat that Dell is a THIEF... DON'T BUY DELL PRODUCTS, ILS SCAM YOU OF YOUR MONEY AND DO NOT SEND YOUR PURCHASE!

  
  

• I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  You need to activate the phone. There is nothing that the phone can not be activated.

• "Show my windows and tabs from last time ' has stopped working after software updated to the end of January or early February. Now on 12.0a2. Change options "Auora to start: ' no longer works.

  I use this feature for years and update Firefox/Aurora in the next few days, maybe a week, an update becomes available and everything suddenly ' show my windows and tabs from last time ' has stopped working. I can go to the Tools-Option-general tab and change "at Aurora startup:" to this option, or 'Show my home page (s)' and now the opening in a new tab single even though I have URLs there. This may mean that this bit is not read correctly. I'm not playing: config, but I watch a few spoken options in the Web and everything looked OK.

  I would uninstall and reinstall it if you think it will solve the problem. I updated Aurora again because this problem started and it remains broken. It is a system of XP with SP3

  PS: I have two other windows with a XP and the other Windows 7. When I had the problem on my primary XP System I stopped to make updates to other systems. Today I updated the two other systems with the latest Auora (skip one or two updates) and both work very well.

  The best way for me to trouble?

  Hey punchcard4rjw,

  Have you tried to start Firefox in Mode safe? Key 'shift' startup of Firefox. If it doesn't happen in Mode without failure, you should read the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems.

  If this does not work, you should look the article How to fix preferences that will not save.

  Hope this helps!

• F20-111: is it possible to set the time to stop the laptop?

  I have a Qosmio F20-111 and I am very qurious on the posibility to set the timer to stop the laptop, maybe I can install a special program

  Hello

  Check it please electric saver tool. Here, you can set the time for hibernation mode. It's almost the same as a power option key. You can find this option in the basic settings.

• Facing problem after completing an operation taking a lot of time to stop running vi.

  Hello

  I am facing a problem that after having completed an operation of its many take the time to stop the vi.

  Means when an operation are in fact that its application and save the file after you have saved the file vi should be stopped but before he stops time consuming and then its judgment.

  And I put that when user open vi Sound already functioning.

  Please guide me how can I fix this problem

  Thank you much in advance.

  It would be possible to have some problem with the system because I've done a new structure for the same program and even if I get the same problem.

  Now, I try to reduce the repeat function and making vi smooth.

  Thank you very much.

• Updates every time I stop.

  Daily for 9 days, when it's time to stop, I allow to install a windows update.  And then it takes about 12 to 15 minutes until that ends, all on the screen that says "do not turn off or unplug your computer.

  I'm running Windows 7 32-bit Home Edition.  According to the center of my action, there is currently no updates to install, but I assume that as soon as I stopped once again today, they tried to install another update (with a shield icon yellow of small windows on the button closure).

  Why can I not get new upates daily, if not twice a day?

  Thank you very much!
  -adam

  Hello

  Probably most of those which are updates which are stuck in repetition.

  guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.
  
  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  I would run the Reset and ON here as a precaution.

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• My laptop installs four updates every time I stop. Is this normal?

  For these last days, my laptop has been installing updates EVERY TIME I stop. And it always installs four. Is this normal, or is there a problem?

  I also recently discovered that my laptop battery "reached the end of its useful life. What is this helps somehow updates?

  Hi Cody,

  1. do you receive any error message when you shut down the computer?

  2. did you of recent changes on the computer?

  This problem occurs when one of the following conditions is true:

  (a) an error has occurred during installation. The update has not been installed.

  (b) the update has been installed. However, a file was not updated to restart the computer.

  See the Microsoft article and try the steps mentioned below.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer installs 13 updates each time it stops

  my computer installs 13 updates each time I stopped, and when I turn it on, it takes a lot of time to configure updates (most of the time it would be 'failure to configure the updates'). is there something wrong? help please!

  Hi Jwezvllacookie,

  I suggest you to follow below provided Microsoft KB and see if the problem is resolved.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Windows takes time to stop when the computer is turned off

  has had to reload xp without windows takes a long time to stop

  Hello

  Welcome to the Microsoft community!

  You re - install Windows XP and still have the same problem?

  During the shutdown of the Windows XP computer, it may take longer time to complete the shutdown process. Slow stops are caused a lot of factors. One of the causes is the clear pagefile at shutdown option enabled.

  Try the following steps:

  Use the Group Policy Editor

  a. Click Start, run and type in "Secpol.msc".
  b. click local policies | Security options.
  (c) in the right pane, set stop: clear the pagefile of virtual memory for people with reduced mobility.

  However, this setting is not the only cause of slow closures. No relevant programs and Services also contribute to slow closures.

  If the problem is seen recently after installing a driver software or third-party, try a system restore to see if that solves the problem of the slow stop.

  How to restore Windows XP to the previous step: http://support.microsoft.com/kb/306084

  I hope that helps!

  If you need further assistance on this issue or any related issue of Windows in the future please let us know.

• Printer error: "Print filter Pipeline host has stopped working" Dell V505 whatever that means and what is the fix?

  Printer error: "Print filter Pipeline host has stopped working" Dell V505 whatever that means and what is the fix?

  frohnj,

  See if This THREAD helps. It is for another printer, but should work for you printer, too.

  Rick

• With 32-bit and a clean install also takes a long time to start and a very long time to stop.

  I use 32-bit and a clean install also, it takes a very long time to start (and sometimes it will not) and a verlong tike to close

  Hello Duane,

  For more clarity and response, I divided it in its own thread.

  After your post, it seems that Vista 32 bit takes a long time to start and a very long time to stop.

  What are the specifications of material of this machine?

  We might want to try a clean boot and see how that affects the issue.

  More details about this is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps solve this problem.

  Best regards

  Matthew_Ha

• Time executable stopped working at startup

  Original title: "Error Messages"

  Time executable stopped working at startup, does that mean and how can I fix it?

  A program that you try to start is not doing this or that you get the message.  If the system is otherwise works fine, we can only focus on the removal of the element (and perhaps we can solve the problem - whatever it is - along the way).

  Try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Go to start / search and type in msconfig.exe and enter and double-click on the program icon that appears, go to the Startup tab and disable all.  Reboot and see if you still have the problem.  If not, add slowly the programs at startup (you want to start - you can take this opportunity to clean this area) until the problem recurs.  Clear this check box, add the rest of the startup items you didn't got but which have been checked and restart.  The message should be gone now.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My computer may take a long time to stop.

  * Original title: Shut down

  My computer off button does not work correctly. My computer may take a long time to stop.

  Do not press the power button to turn off the computer or to solve a gel. Click on the ORB at the bottom left of the desktop and click stop. If you are having shutdown problems, then select the hotkey Ctrl + Shift + Esc to bring up the Task Manager and click the Applications place the cursor on a running application to select and click on the end task button. As the application is removed from the list, repeat the procedure on the next application in the list until all are gone from the list. If you use the taskbar to access programs simply close all open windows. Then, you should be able to shut down your computer.

  http://Windows.Microsoft.com/en-in/Windows7/turning-off-your-computer-properly