Time very slow start after the restoration in car merger

Similar Questions

• Satellite U940 Windows 10 update, very slow start to the top

  Hello

  It looks after upgrade to win10, the SSD is not used to quickly boot up the laptop.
  How can this problem be solved?

  In tools, defragment disc, it shows all of my partitions as SSD drive so I can't defragment.
  Why are they displayed as SSD? I think that the basic motivation is a 500 gb HHD and only a 32 GB SSD is included.

  Also in the management of the computer disk SSD drive shows only 11.22 GB of capacity and is not used (all 11.22 GB free)

  Help, please. I want to get the quick start of the win8.1 and at the same time be able to defragment my HARD drive.

  Posted by some_user
  

  Hello

  It looks after upgrade to win10, the SSD is not used to quickly boot up the laptop.
  How can this problem be solved?

  In tools, defragment disc, it shows all of my partitions as SSD drive so I can't defragment.
  Why are they displayed as SSD? I think that the basic motivation is a 500 gb HHD and only a 32 GB SSD is included.

  Also in the management of the computer disk SSD drive shows only 11.22 GB of capacity and is not used (all 11.22 GB free)

  Help, please. I want to get the quick start of the win8.1 and at the same time be able to defragment my HARD drive.

  Hello

  Same problem here with a weak start after the upgrade to Windows 10 (with a Satellite U940-11 t).
  If anyone has the solution, it could be great :-)

  EDIT: I just saw this post: https://forum.toshiba.eu/showthread...-to-Windows-10
  I will try this solution.

• Lenovo Ideapad Y560 very slow just after the start

  Hello!

  I have a weird problem with my laptop Ideapad Y560 (2 years). I was wondering if any of you have a similar problem and looking for a possible solution.

  As soon as I start the laptop (either), it is very slow for the first 3-4 minutes. Nothing to really works or opens, it hangs for a while and runs my entries of keyboard and mouse with a considerable delay. After this period of 3-4 minutes, it works perfectly fine, also responds well/crisp as the lappy was brand new. I can't understand why he behaves in this way.

  I almost never stop the laptop and generally just put it to sleep. However, I have this problem (as described above) if I turn on the lappy a stop or a State of sleep also. Anyone seen this before? Could someone please suggest possible solutions? Any help is very appreciated! Thank you!

  lprassanth wrote:

  Thank you. I did it twice and I got a message that he "did not for any breach of integrity" at every opportunity. Restarting the machine. Problem persists.

  Try the manual cleaning of Windows and then follow-up with defrag.

• Firewall Windows disable the Internet Explorer loads Up after slow start after the installation of Windows updates

  Hello, (this the mystery of on and Off and back on Windows Firewall with slow loading of programs like Internet Explorer as this all is pass it on firewall, disable the firewall, the firewall, it occurs only during starts, after he fine / but very annoying on reboots whom he accuses of my computer down) / listed below is the cause of it , and when she first started, you have a solution?

  I recently installed the last 16 (High Profile) updates to security, for most security updates and updates from net framework as well as the removal of malware for windows XP tool.

  After installing these updates, now my Windows Firewall turns off during 'Boot Up' on all restarts. If I try to load Internet Explorer, it will also not load up to minutes serveral / while this happens... That's fine, then finally my firewall itself loads Up quickly turns to Internet Explorer and back on during this time around the same time.

  After these updates these things are happening on my computer now, it's as if there is a process running, but nothing run any virus, Trojan or worm etc just these updates caused this problem. I don't know if it updates is corrupt or not, but have tried different things as system file checker /scan etc with no luck.

  (1) computer boots to the top and seems to Load Up Fine ' until the ' or 'Look at this' but isn't, something is running in the background or process "wing unstalled" is obviously "unhooked", etc..

  2) try to load Internet Explorer last minutes and is very slow to load up, even if I 'don't load Internet Explorer' must still a long while that as in the firewall turn off for awhile some several «minutes» (way too long), before "auto turn on automatically return.

  (3) turns firewall Windows itself on "finally" as Internet Explorer finally loads upwards as well the two Internet Explorer is able to load 'definitely' and the firewall is on "finally" as many minutes later as listed above, at the same time.

  This could be the cause? Only, it has begun to 'After' I ran windows update and installed the 'most recently high security updates for windows XP' there were 16 listed mainly security updates and updates of net framework as well as the software removal tool windows malware.

  That's all that is changed on my system, I tried many things, nothing seems to fix this problem with my computer. I know for a fact that these updates are the cause, but am not sure that you caused it? Or how do to solve this problem, any sugguestions would be appreciated.

  Please answer questions following diagnosis by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on the computer?

  3. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. you are using IE6, IE7 or IE8?

  5. have you ALREADY had the opportunity to do a Repair Installation of Windows XP for some reason any?

  PS: PLEASE DO NOT START ANYTHING IN ADDITION TO NEW THREADS ABOUT IT!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Very slow computer after the latest updates

  Hello

  I've updated one of my PCs running Vista x 64 updates of security two days ago.
  Now that the systems takes more than 15 minutes just to start at the opening screen of session and as much time again to get on the desktop.
  The mouse cursor is always fast as usual, but everything else including the caret blink time is super slow.

  This is a really clean system which is used strictly for dedicated 3D work, so he has nothing but Max, EU3 and WinZip on it.  It is not used for Internet access.
  No hardware or software changes attempted in several months, other than updates Windows System.
  Intel C2Q Q6600, 8 GB 1066 RAM, NVidia 8800GTS 512, WD 500 GB HD, ASUS P5K mobo.

  I was wondering if anyone else has experienced this problem with updates, especially as it's really painful trying to solve the problems since that it literally takes hours to try whatever it locate either changes the problem.  I'll do a wipe and reinstall if I have to spend a lot more time with reboots, it will be faster.

  I am answering my own question here... :-)
  Maybe it will help someone else and save a few hours of work waiting for the slow start to fix things.

  For those who are interested: the OS is Vista Home Premium x 64. Material has been listed above. It is a high-end with hardware system high range, coolers, cases, power supply, etc.
  This is not a system of job full time, it is used only for specific work I usually do a few hours on one or two days a week.

  I timed it really starts the Welcome screen and it is more than 45 minutes. lol :-D
  I pulled off the side of the case and noticed that the HDD was just chewing on something.
  Start in safe mode was also just as painfully slow as standard start (argh).

  Regarding the updates of Windows, I have this system set to inform only, so I only install updates at the end of all the days that I work on the computer. Where my assumption that it's a matter of update that caused the problem, since nothing ever changes, on this subject - files are still saved out to a network server.

  However, once I could get on the computer, I noticed that I had also installed Windows Live Mail top the same day I did the updates of Windows (two days ago). WLM has been installed just to get a screenshot of it for my blog, it was never really used for Internet e-mail, it should be uninstalled some time on one of the next system bootups.

  Then... Installation apparently a combination of WLM or the latest Windows updates has completely borked something on the computer starts.
  I got my DVD of Vista, it started, ran the Startup Repair. Now, the system works very well. WLM has been uninstalled in the case where it has been part or all of the guilty.
  As with a PC, it could be something to do with the specific hardware and software configuration, the order of WLM and updates installed, specific updates installed, etc..

  I would recommend that anyone with a similar configuration be sure to install WLM or updates in the estate where they fall in the same question.
  Just don't panic if you have problems, try a DVD Vista Startup Repair. :-)

• Pavilion DM4-1265dx does not start after the restoration, the new hard drive

  Hello:

  I have a laptop of clients that a hard drive has been giving an iminent failure message.  I was able to create a disc of recovery and replaced the original HD (640 GB) with a 500 GB HD.  I can't do the factory recovery because the hard drive is smaller, but it allows me to perform a recovery of the operating system.  The question that I am running is after he read the DVD 6, the system wants to re-start and then it crashes just in the HP splash screen.  If I turn it works, I get could not find a boot device.

  How can I get around that, before the establishment with a win 7 CD?  Is this process of recovery to a waste of time, as I did on the previous model HP computers and it has always worked.

  Thanks in advance for any ideas.

  Mike

  Hi cloud:

  To be more precise, of memory, there are two options, reset and factory restore.  Factory restore won't do it because the disk is slightly smaller.  Factory reset will allow me to put the recovery disk hard, but when he re - start, it crashes just in the hp splash screen.  When I do the three fingers of salvation, then I get cannot find the boot device.  I made the internal test and everything passes with flying colors.

  I finished download an iso image and install from scratch, but I can tell you that it is the system more screwed up that I never ran into 30 years of working with these toys.  I tired to do a repair, but that creates just again the same symptom.

  I have an Acer Tablet that I've been able to use the computers acer recovery disk that was not intended (but had the same version of the operating system) and at least was able to get the operating system and software and finished to the top with the right drivers, size of the hard drive has been ignored in their case.

  Thanks for help you, it is appreciated, but I doubt I can recommend HP to one of my clients in the future based on what I've run here.  This is inconsistent with a solution of recovery as far as I'm concerned, that MS requires manufacturers.  Lets get real, hardware fails for various reasons, and you may not necessarily the same size hard drives with the rate of change occurring in the industry.  Personally, I prefer a game of installation for the operating system and drivers disks.  Dell is one of the only ones I know who did this, and as much as their material is so so, they do at least that right of the party.

  Once again thank you.

  Mike

• Very slow download after the update February 10

  After the update automated around Feb 10th, photos are slowly and web video a crawl - for every one second of game-playing, it hangs for 10 seconds or more.

  Download Adobe software update takes forever - about 10 kb/s or less. Everything slowed to a crawl.  What is going on?

  I have a DELL reconditioned with XP and a custom-built Q8900 Intel Vista and it happens on both machines.

  I think of restoring to the point of pre-2/10 but do not want to be vulnerable.  Any person with knowledge or patch fix, feel free to post... help!

  johnnydj,
  After testing mode safe mode with networking, I suggest that you make sure that your NETWORK card drivers are up to date.  You can also see if there is a firmware upgrade for the router you have.  Alternatively, you can perform a clean boot to see if other software can interfere with your system.  Also, make sure that your security software is up-to-date.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tecra Z50-A-11 q - slow start after the installation of Win 8.1

  Today, I installed Windows 8.1 CD. Also, I followed the instructions and had a old BIOS in the UEFI.
  The installation has been successful, but now the BIOS starts slowly. After almost a minute to look at the Toshiba logo, Windows 8 starts.

  I can't find the solution.
  There is one thing that is strange: I see several partitions on the hard disk, in the following order:
  1.00 GB (OK, recovery partition)
  100 MB (EFI system partition)
  455,46 NTFS
  9.08 GB (OK, recovery partition)

  Help or advice welcome.

  Thanks & greetings
  Maurice

  Solved, because after installing updates Windows 196 he starts suddenly fast. (VERY fast)

• How can I fix the very slow response after the wake up the computer from sleep mode?

  Never had this problem until a few days ago. Using Windows 7. I want to use the "sleep mode" whenever I leave my office (be it for a few minutes or several hours). Always came back just as I left it (tabs, work-in-progress, etc.) until recently. If I reboot, everything of fine, up to what I use mode "time" again. So painful.

  Thanks for the tip. I disabled the accelerator according to your link and suggestions and the problem seems to have been resolved, at least for now!

• Copying files very slow USB after the ICS update

  Does anyone else have a problem?

  I'm trying to copy a 500 MB external hard drive (FAT32) file on the internal SD card and just of crawls and crashes. It used to be swift.

  Does anyone else know this? Any other file manager would be faster?

  Which file manager you use? Have you tried HD file manager? I've been using it to copy a file over 700 MB of a flash drive to SD internal card without any problems "slow".

• APEX application builder very slow start + Web site

  I ' am knows a very slow start of the APEX and APEX Web sites on a Windows 2003 server and a base of XE. I see very long waits (75 sec) for the status of virtual circuits. Is there a resolution to this problem?
  
  Edited by: WebMees NL on July 8, 2009 19:33

  Hello:

  Connect to the database as the user "sys".

  select name,value from v$parameter where name ='shared_servers'; --- current setting
  
  alter system set shared_servers=5 scope = both; --- change setting to 5 
  

  CITY

• Time of very slow start with SSD

  Hello

  I spent the last few days the net trying to find a solution to the boot of win7 very slow but have led to nothing so far trawling.
  Im running Win7 Pro in bootcamp on a Macbook Pro with an SSD and 16 GB of RAM, but don't get a time horribly slow start, including a screen black (with usable mouse) for a long time before the watch office. I am not able to do a reinstall but would like to get the issue resolved if possible.

  So far, I checked the event viewer to see there are problems and I don't see anything significant that the mere fact that each entry includes an 'Error' level, but I don't see what this error. I also used the process monitor to see what takes so long and there are a couple of processes which are time consuming and show a result 'Cancelled', one being svchost.exe 110secs (path: ...system32\drivers\etc) and the other 23secs Explorer.exe (path: ...appdata\roaming\microsoft\systemcertificates\my)

  I should mention that I'm very new to this kind of troubleshooting but would appreciate any help I can get!

  Thank you!

  The problem is that windows has been hanged in trying to restore network connections. Problem solved!

• Error 16 after the restoration of Photoshop Time machine

  My HARD drive died. After the restoration of Photoshop CS6 and Photoshop Time CC14 Machine again SSD or opens. I get the error 16. I restored adobe all the library files and all permissions are correct.

  Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• updated to 16 MB on 2011 iMac 27.5 inch quad core will cause a slow start to the top?

  Have 27.5 inch iMac OSX 10.11.3 computer. The memory of 4 MB.  Recently updated to 16 MB.  Now have the very slow start up.  15 minutes.

  Should take 15 minutes to initialize 16 MB on a quad core computer?

  ewcbhc wrote:

  Have 27.5 inch iMac OSX 10.11.3 computer. The memory of 4 MB.  Recently updated to 16 MB.  Now have the very slow start up.  15 minutes.

  Should take 15 minutes to initialize 16 MB on a quad core computer?

  If you put expensive RAM and/or incorrect RAM then Yes. iMacs are very sensitive to the RAM and you must use quality RAM, more experienced on these forums users use OWC (www.macsales.com) or critical (direct purchase). RAM should also be installed in pairs. If you purchased anything else, then after a report of EtreCheck of your system and we can look for obvious problems.

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?