Time zone issue

Similar Questions

• database time zone issues

  Hello

  I fell on the database time zone parameter that can be given with the CREATE DATABASE statement. However, I have found that not all databases under my control have the same time zone (some are custom databases (DBCA), some are base model). But as the affected applications only run in one country I think they should all have the same. As no timestamp with local time zone is used, I can change it with a restart. However, some questions came I couldn't find no response yet:

  1 documentation recommends to set the timezone UTC (+ 00:00), but does not give the reasons why. Anyone know what is the advantage compared to the local time zone?

  (http://docs.oracle.com/cd/E11882_01/server.112/e10729/ch4datetime.htm#NLSPG262)

  2. set a fixed offset (+ 01:00-08:00) causes to ignore changes to the DST, correct? Therefore, it is best to use a name of region (Europe/Berlin or Asia/Kuwait), right?

  3 do you know of any issues that may arise right after having changed the timezone of db?

  THX.

  Robert

  ------------------------------------------------

  DB 11.2.0.4 (EE & SEOne)

  Hi Robert,.

  Please check

  Time clocks & time - zones frequently asked Questions (Doc ID 340512.1)

  (3) what is the time zone used for database? And what is not?

  Any additional help is more welcomed
  Please mark the post as useful/correct your judge to help others find the answer.

  Kind regards
  OLA Yehia

• Issue of globalization - Set time zone

  Hello

  Depending on the condition, I put globalization attribute value from the Local time zone to Yes. But now, every time a user connects it gets 'Set Time Zone' on the screen. When he clicks on it. the time zone is set to 0.00.

  If the user does not click, the local time zone browser is correctly retrieved.

  Question: Can I hide this hyperlink that comes after the connection?

  Thank you

  You must to_char date. For example, in a SELECT statement, I use:

  my_date to_char (FROM_TZ (CAST (date_column AS TIMESTAMP), "America/New_York") to the LOCAL, ' Dy month ddth aaaa hh24:mi:ss ")

  New York being the database time zone I tested it on. A list of other time zones that you can use, depending on where your database, can be found here:

  http://docs.Oracle.com/CD/B28359_01/server.111/b28298/applocaledata.htm#NLSPG0141

• Time zone conversion issue.

  Hello
  
  I'm having a problem with the following command.
  

  select CAST(from_tz(cast ((to_date('2013-03-31 01:01:00','YYYY-MM-DD HH24:MI:SS')) as timestamp),'Europe/London' ) AT TIME ZONE 'GMT' AS DATE) from dual;

  Error:
  ORA-01878: specified not found in datetime or interval field
  01878 00000 - "specified field not found in datetime or interval.
  * Cause: The specified field is not found in the datetime or interval.
  * Action: Make sure that the specified field is datetime or interval.
  
  Please help remember me what is the problem here.
  
  Thank you.
  Mr. lonely

  What you have given is not a valid time in Europe/London.

  If I'm not wrong, for Day light saving in the specified time zone, DST started on Sunday, March 31, 2013 to 01:00 when local clocks went forward 1 hour.

  If you try another date, the code works. Or if you try any time other than 01:00-01:59:59 - this is going to work...

  Search for "dst in europe/london", you will get more details...

• AirPort Extreme - set time zone

  Greetings:

  I have seen a lot of traffic on the change of the parameter of time zone in an AirPort Extreme, but I can't find an answer.  It seems that it may be impossible.  There is debate if even a hard reset of the device clears the set time zone and allow it to be reset.  It also seems to be no access to the device to terminal implemented a manual correction.

  I left US mountain for the Eastern US time zone time zone.  I have an AirPort Extreme running firmware version 7.6.7 and use version 6.3.6 AirPort Utility.  My AirPort Extreme needs to operate in bridge, because of the way the Internet is provided by our service.  I use the 'access control Timed"to limit the time that my young children are able to access the Internet.

  It should be a simple matter to define the time zone of my AirPort Extreme to my current location (or so it should automatically and reliably).  I don't know if the bridge mode interferes with the ability of the device to find its time zone.

  Can anyone offer advice (other than to apply an offset from my control access timed two hours time difference)?  Can the Genius Bar at my local store to fix?

  Thank you in advance,

  WILX

  Unfortunately, Apple has removed a number of parameters that they feel that the users do not need. Setting the time is one of them.

  Finally, your airport will have the exact time, but it usually takes about 6 weeks for that to happen.  Until then, you will need to manually adjust the access delay settings to compensate for.  When the time of the correction is made, then you have to adjust again timed access.

  We have seen some reports from users who claim that resetting the airport to return to the default settings and then setting them up again will fix the issue of the time, but it has not always worked when I tried it.

  If the 'genius' can solve this problem quickly, then he won the title.

• Cannot set the time zone of Moscow winter + 3 hours.

  Cannot set the time zone of Moscow winter + 3 hours.
  Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.
  It is an error of your software when you are ready to address this issue.

  Automatic deactivation date & time(Settings>Date&Time...)

• In regards to the time zone setting in the service platform Azure from microsoft

  I have a question about PAAS zone. How we define UTC + 5.30 time zone on particular service.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• The FEP Server alert notifications do not display the correct time zone

  Time stamps FEP report

  When I receive my FEP Server alert notifications timestamps are far away. Nobody knows how to set the correct time zone, so the report will be accurate?  I think that the default time is UTC.

  Hello

  If you are referring to serve Advanced Endpoint Protection, I suggest you to report the issue in the link below:

  http://social.technet.Microsoft.com/forums/en/category/forefront

  I hope this helps.

• Time zone offset problems

  I use a system where I have a Linux server and Windows clients.  The software is running is for security cameras, and it compares between the server and the client time zone offsets to determine what time to display for the recorded video events.  The problem is that Linux thinks I'm in GMT - 05:00, which is correct, and Windows think I am GMT - 06:00, which is false.

  Both are set up for Central time, and the two report the correct time despite the different offsets.  I'm assuming that Windows maintains the offset based on the time zone, and then applies in addition an advanced time of savings (DST) offset because if I turn off the DST, the offset is the same.  In any case, something is wrong.  He is not much of interest to mention the system that I'm under because it is obscure and who will not help.  But the time zone difference time lags is the problem.

  For what it's worth, this happens on several Windows XP and 7 computers.  An Android client works correctly, but is based on Linux, so not a surprise.

  Anyone know what the problem is with Windows time zone does not properly?

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Question time zone on Windows 2008 R2 RDS

  Hello

  We seem to have a problem with the redirection of zone on a 2008 server R2 RDS.   It's strange because there doesn't seem to be a problem for people in Sweden with a Swedish version of windows 7.  When I login to the United Kingdom with my version of windows and the United Kingdom time zone all working them correctly.

  Does anyone have any suggestions on how I can solve this problem.

  I just did another test to my time zone: ' (UTC + 01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna ' and it works very well. "

  It must have something to do with the Swedish language.

  Thank you

  Nick

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Time zone and CalendarEvents

  There is another thread on this here

  I closed the other thread because I've found a workaround

  but he needs a few manual adjustments

  Here are the outstanding issues:

  1 CalendarEvent.setTimezone needs a database id.

  where can we get this list?

  I have not found any method.

  QTimeZone class has ids(), but QTimeZone does not exist in the Cascades

  at present, no one can know that, e.g. for "Eastern Standard (-5)", you need to define ' America/New_York '.

  2. it must be possible to obtain the UTC offset for zone an and specific data

  3 InvocationFramework - to create the calendar event time zone requirements and the location - the two is missing

  good news for the zone names you want to assign to CalendarEvents as I do

  Here's a response I just got from Mark Sohm:

  ----------

  For the time zone, we use the standard time zone id Olson now not the zone names specific to Microsoft as "Eastern Standard Time" (even though in some cases, we are able to translate between the two), or previous BBOS time zone identifiers.

  These codes can be found here: http://en.wikipedia.org/wiki/List_of_tz_database_time_zones

  How API works now, he assumed that the start and end times correspond to the zone local device and that you also assign the id of the Olson time zone that matches what you want the event to take.

  -----------

  Have fun with the zones now - a powerful way to create CalendarEvents for another time zone, then your current zone

• Access to the OPC in a time zone different server console: security audit

  Hello

  I noticed this on several instances when CPO console in a time zone (example: CSE) tries to access an OPC server in any other time zone, the console is unable to connect to the OPC Server and I see this error message:

  "An error has occurred during the security check for the message"

  Is there a known issue with the console to access the OPC Server and a handshake that goes?

  Newspapers:

  @@Logging the process Tidal.Automation.Console.Loader.exe (id = 13248)

  || 8. 06/03/2013 19:20:00.365 | 13736. Failed to get server ID for Assembly store connection:

  || 9. 19:20:00.366 06/03/2013 | 13736. EXCEPTION (System.ServiceModel.Security.MessageSecurityException): A secure or incorrectly secured error was received from the other party. See the inner FaultException for the code of error and detail.

  Stack trace:

  Server stack trace:

  to System.ServiceModel.Channels.SecurityChannelFactory'1.SecurityRequestChannel.ProcessReply (answer Message, SecurityProtocolCorrelationState correlationState, TimeSpan timeout)

  to System.ServiceModel.Channels.SecurityChannelFactory'1.SecurityRequestChannel.Request (Message message, TimeSpan timeout)

  at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation (SecuritySessionOperation operation, target EndpointAddress, Uri, SecurityToken currentToken, TimeSpan timeout)

  at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore (TimeSpan timeout)

  at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken (TimeSpan timeout)

  to System.ServiceModel.Security.SecuritySessionClientSettings'1.ClientSecuritySessionChannel.OnOpen (TimeSpan timeout)

  at System.ServiceModel.Channels.CommunicationObject.Open (TimeSpan timeout)

  at System.ServiceModel.Channels.ServiceChannel.OnOpen (TimeSpan timeout)

  at System.ServiceModel.Channels.CommunicationObject.Open (TimeSpan timeout)

  at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce (TimeSpan timeout, CallOnceManager waterfall)

  at System.ServiceModel.Channels.ServiceChannel.EnsureOpened (TimeSpan timeout)

  at System.ServiceModel.Channels.ServiceChannel.Call (String action, ProxyOperationRuntime, Boolean, Object [ins] oneway operation, Object [], TimeSpan timeout breaks)

  to System.ServiceModel.Channels.ServiceChannelProxy.InvokeService (IMethodCallMessage methodCall, operation of ProxyOperationRuntime)

  at System.ServiceModel.Channels.ServiceChannelProxy.Invoke (IMessage message)

  Exception thrown once again [0]:

  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)

  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)

  at Tidal.Automation.Common.AssemblyManager.IAssemblyManager.GetServerId)

  at Tidal.Automation.WinForms.Loader.AssemblyStore.GetRequiredFiles)

  || 10. 19:20:00.366 06/03/2013 | 13736.   EXCEPTION INTERNALLY (System.ServiceModel.FaultException): An error has occurred during the security check for the message.

  Stack trace:

  || 11. 19:20:37.696 06/03/2013 | 13736. Failed to get server ID for Assembly store connection:

  || 12. 19:20:37.696 06/03/2013 | 13736. EXCEPTION (System.ServiceModel.Security.MessageSecurityException): A secure or incorrectly secured error was received from the other party. See the inner FaultException for the code of error and detail.

  Stack trace:

  Server stack trace:

  to System.ServiceModel.Channels.SecurityChannelFactory'1.SecurityRequestChannel.ProcessReply (answer Message, SecurityProtocolCorrelationState correlationState, TimeSpan timeout)

  to System.ServiceModel.Channels.SecurityChannelFactory'1.SecurityRequestChannel.Request (Message message, TimeSpan timeout)

  at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation (SecuritySessionOperation operation, target EndpointAddress, Uri, SecurityToken currentToken, TimeSpan timeout)

  at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore (TimeSpan timeout)

  at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken (TimeSpan timeout)

  to System.ServiceModel.Security.SecuritySessionClientSettings'1.ClientSecuritySessionChannel.OnOpen (TimeSpan timeout)

  at System.ServiceModel.Channels.CommunicationObject.Open (TimeSpan timeout)

  at System.ServiceModel.Channels.ServiceChannel.OnOpen (TimeSpan timeout)

  at System.ServiceModel.Channels.CommunicationObject.Open (TimeSpan timeout)

  at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce (TimeSpan timeout, CallOnceManager waterfall)

  at System.ServiceModel.Channels.ServiceChannel.EnsureOpened (TimeSpan timeout)

  at System.ServiceModel.Channels.ServiceChannel.Call (String action, ProxyOperationRuntime, Boolean, Object [ins] oneway operation, Object [], TimeSpan timeout breaks)

  to System.ServiceModel.Channels.ServiceChannelProxy.InvokeService (IMethodCallMessage methodCall, operation of ProxyOperationRuntime)

  at System.ServiceModel.Channels.ServiceChannelProxy.Invoke (IMessage message)

  Exception thrown once again [0]:

  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)

  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)

  at Tidal.Automation.Common.AssemblyManager.IAssemblyManager.GetServerId)

  at Tidal.Automation.WinForms.Loader.AssemblyStore.GetRequiredFiles)

  || 13. 19:20:37.696 06/03/2013 | 13736.   EXCEPTION INTERNALLY (System.ServiceModel.FaultException): An error has occurred during the security check for the message.

  Stack trace:

  More important than if their zones are different if their * time * differ.

  12:00 EST = 09:00 in PST as long as everyone (including Windows) is concerned.

  If both are 12:00 then the synchronization time is the problem, and this would cause problems of authentication handshake.  NT authentication allows only something like 10 minutes of clock skew.  My example here has 180 minutes of clock skew.

• java.sql.SQLDataException: ORA-01882: region time zone not found

  Hello
  
  I use JDeveloper 11.1.2.0.0 and holds zone schedule system: 5 h 30 GMT + (Chennai, Kolkatta, Mumbai, New delhi) when I run the page jspx - only with a command button, it works fine. But when I drag a table into the jspx page and run the implementation even the below error.
  
  java.sql.SQLDataException: ORA-01882: region time zone not found
  
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
  at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
  
  
  To set the same, tried the resolution below as suggested on the forums and did not fix the issue
  
  1. define the Application-> default Application of properties-> Run/Debug/profile-> Edit and set java options like - Duser.timezone = "-05:30.
  2 edited the jdev.conf file and set the AddVMOption property - Duser.timezone = 'GMT + 05:30 '.
  
  The steps that worked.
  
  Set java options like - Duser.timezone = "-05:30 ' for each project that is available in the application.
  Note: This correction of the problem. But my application has more than 10 projects and must be repeated. So for each application and its projects step below must be repeated.
  
  I understand that there is a resolution. But is there a solution to the same difficulty in JDEV level. If so help me please on the same sample.
  
  Kind regards
  Olivier G

  http://manojm-Nair.blogspot.in/2011/03/ora-01882-timezone-region-not-found.html

• Ss12, time remapping: how to remove one of the multiple time zones?

  Ss12 has the time remapping effect, which is excellent.

  I remapped a clip, featuring several "zones" in slomo.  After clicking on the + sign to create the last zone, I realized that this was too many, and not really quite the same concept as the other.  I had not yet dragged the border to create any length.  But there seems to be no way to remove it, delete or cancel the action of having created it.  "Reset" to delete all time zones.

  I could leave it as is, with a normal attribute of the time full speed.  But it is sloppy and let this kind of artifact behind in any type of program or project can turn against you.  If this is not an option.

  I could delete them all and start over.  But it would be a lot of work and would not be closer to the fundamental issue, which is to know how to delete or cancel one time zone.

  Any suggestion will be highly appreciated.

  Kawika808

  The first thought that comes to mind was to put on 'Normal' for the time zone of interest here.

  But there is an easier way... at the top right corner of a block of time zone is of x. Click to close and to get rid of this particular time zone.

  Please let us know if none of this works for you.

  Thank you.

  RTA

• Create table QA with invalid time zone

  Hello experts,
  
  I have a problem:
  When I create a new table of advanced queue that is the time zone standard + 00:00 in the SYSTEM. AQ$ _QUEUE_TABLES.
  When I queue a message to the QA enq_time differences of two hours with the sysdate. This is because we have a zone schedule + 02:00.
  
  I have a few questions related to the issues:
  
  1. is there a setting to create a QA with the time zone correct offset(+02:00)?
  2. when I update the QA system. AQ$ _QUEUE_TABLES with the time zone correct offset(+02:00) to restart database, nothing happens. The zone is still + 00:00.
  
  I read metalink (bug 5711286) and the forum and all that I can find is dat above issue is fixed in version 11.2.0.1 DB and above.
  
  Below the features of database:
  
  Database 11g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  
  Thanks in advance,
  
  Ronald

  Hello

  Yes, it's the bug that is supposed to be fixed in 11.2.0.1, if people are still problems in this area to this version or later then this should be raised with Support from Oracle.

  Thank you
  Paul

  Published by: pdtill2508 on Sep 14, 2011 09:45