Timeline in half of the slow-down speed

Similar Questions

• The dc7600 fan not slowed down speed

  I'm new here but I have no news for the repair of computers, a problem which therefore left me speechless!

  A customer brought me a Hp DC7600 SFF desktop computer and said that the thing is so loud it doen't want to use it.

  Card"Pentium 4 3.00 Ghz

  2 GB DDR2 533 memory

  320 GB HD

  Win 7

  I lit and was swept away, this thing is so strong that you does not think!

  I disconnected the chassis fan that he calmed down some but the CPU fan turns at 5400 RPM all the time, I can't get the fans to slow down! I tried to use the program Speedfan, it was a joke.

  I am at a loss for what to do and wondering if something on the Board that controls the speed of the fan go haywire. I also upgraded to the latest BIOS and that did nothing.

  When the computer starts, it seems frankly a small liquidation aircraft prepares for take-off!

  What to do, what to do? ANY suggestions would be most appreciated.

  Thank you for your comments/ideas and suggestions. I would recommend he get a newer system because I think it's history! We have done everything that we can and it's time to throw in the towel! Thank you so much!

• How to slow down / speed of Animation

  Hello

  I use Flash CS4 and am working on a project where I'm hand pulling a running on-screen animation.  I lured him in consecutive keyframes.  Its too fast.  How to slow down or to vary the speed?  I tried to add empty frames between each drawing but its very time consuming.

  This is all pretty new to me, and I appreciate all help.

  Thanks, Kate

  Either lower frame rate (fps) so that playback is slower, or another option to frame-by-frame is to simply space executives a little, so there is a new framework for all other images etc.

  There are just a lot of experimenting to see which works best.

  Also using the motion tween on hand drawn queries would you give much more control of speed and change with a lot of workload shot.

• How to speed up my internet or get rid of cookies that causes the slowing down my computer

  I have an acer desktop aspire. I need to know how to speed up internet service... to get rid of internet cookies... .my computer is running slower and slower

  Download free Malwarebytes https://www.malwarebytes.org/mwb-download/ , run it and see what it finds.

• Slow down the Sierra, grief beach ball

  Initially, after the download of the Sierra, all was great. Now, the day and a half later, performance has significantly slowed down and a lot of rotation beach balls advance a little.

  Ways to help make a slow Mac faster

  1. 17 reasons why your Mac runs slower than expected
  2. Slow performance of Mac? This Article addresses!
  3. Difficulty of slow start in OS X | MacFixIt - CNET Reviews
  4. How to fix the slow down time and start. | MacTip.net
  5. 6 easy tips to speed up OS X Yosemite on your Mac.
  6. OS X El Capitan - if your Mac runs slowly
  7. Visit The FAQ XLab and read the FAQS on performance

  Avoid using any third-party cleaning software. Usually, this software does more harm than good. You don't need it. All computers become slower over time even in normal conditions of use. Experienced users erasing the hard drive and do a clean install from scratch, from time to time; or every time that the installation of a major update of the OS. Do means if you must maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Delete unnecessary anti-malware software and any software that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan activity. Also, visit The FAQ XLab and read the FAQ on the treatment with The Spinning Beach Ball of Death.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

• Slow down the images of the drone

  Hello

  I'm new to the first, please bear with me.

  Typically, I shoot my footage of drone in 50 p, fall in a 25 p timeline and it automatically it slows down to 25 p (in the Final Cut).

  So my question is, if I drop a video 50 p on a sequence of 25 p in the first, will be slowed down up to 25 p (50%)?

  PP will play all media at the rate of the sequence.  But... it will not speed up or slow down the images that do not match.  It will just drop or repeat frames to get the correct reading.

  Fast (or slow) movement is always done manually.  It just never happens.

• Slow down gradually by typing in the text block

  I read all the other threads regarding typing slow in InDesign, but I had not anything the problem that I am facing. My problem is that typing becomes gradually slow when you type in certain blocks of text, that is, it is fast when I start typing in the empty block, but as the text block is filled with the text, it becomes slow.

  I use two types of blocks of text on each page of my document: one with no style whatsoever and the other with a style of object including a border, two rounded corners and margins. This gradually typing slow occurs only in the second type of text block.

  I hit a relatively small (7 MB, less than 300 pages), file text without columns, cross-references, paste them from other applications, connecting blocks of text, or any of the other usual culprits for slow typing I've read about. Nothing else in InDesign is slow, including typing in the other type of text block (without borders, etc.).

  Any ideas?

  Its most likely the rounded corners that is causing the slow down.  Not sure how RADIUS helps you, but having to calculate how to keep the text with rounded corners is much more expensive than when the text block is a simple box.  A suggestion to help alleviate the problem is to break the document by chapter upward, so that you do not have the end of a chapter that connects the beginning of the next.  When you have a large number of pages of text all flow from one page to another, editing text in a page means that all of the following must be recalculated.  Break this cascade of changes from one page to the other will help with performance.  A disadvantage is that you need to be careful and watch the overset text or blank pages that passes at the end of each chapter.

  Mark VerMurlen

  InDesign engineering

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• Double buffer program is slowing down, help.

  Hello, I have a small program of lines of dance as an old Windows screen saver program, and it seems to slow down after about 30 seconds to a minute. I have 'clear' my buffer by copying a symbol in black screen size of the buffer. If anyone has any ideas on how to make it more efficient and above all to stop the slow down, let me know, thanks.

  // Variables
  var x0:int;
  var y0:int;
  var x1:int;
  var y1:int;
  var x2:int;
  var y2:int;
  var x3:int;
  var y3:int;
  var dx0:int;
  var dy0:int;
  var dx1:int;
  var dy1:int;
  var dx2:int;
  var dy2:int;
  var dx3:int;
  var dy3:int;
  var counter:int = 0;
  var clearBuffer:Buffer = new Buffer();
  var drawing:Shape = new Shape();
  var color1:uint = uint(0xFFFFFF * Math.random());
  
  // Initialize Line Values
  x0 = int(Math.random() * 320);
  x1 = int(Math.random() * 320);
  y0 = int(Math.random() * 200);
  y1 = int(Math.random() * 200);
  x2 = x0;
  x3 = x1;
  y2 = y0;
  y3 = y1;
  
  // Initializing Line Velocities
  dx0 = int(Math.random() * 5);
  dx1 = int(Math.random() * 5);
  dy0 = int(Math.random() * 5);
  dy1 = int(Math.random() * 5);
  dx2 = dx0;
  dx3 = dx1;
  dy2 = dy0;
  dy3 = dy1;
  
  // Double Buffer Setup
  var bitmap:BitmapData = new BitmapData(stage.stageWidth,stage.stageHeight,true,0xff000000);                          
  var buffer:BitmapData = new BitmapData(stage.stageWidth,stage.stageHeight,true,0xff000000);
  var image:Bitmap = new Bitmap(bitmap);
  addChild(image);
  
  // Listeners
  addEventListener(Event.ENTER_FRAME,onEnterFrame);
  
  function onEnterFrame(event:Event):void {
       
       // Clear The Sreen
       buffer.draw(clearBuffer);
       
       // Logic
       drawing.graphics.lineStyle(1, color1);
       drawing.graphics.moveTo(x0,y0);
       drawing.graphics.lineTo(x1,y1);
       if ((x0 += dx0) >= 315 || x0 < 5)
            dx0 *= -1;
       if ((y0 += dy0) >= 195 || y0 < 5)
            dy0 *= -1;
       if ((x1 += dx1) >= 315 || x1 < 5)
            dx1 *= -1;
       if ((y1 += dy1) >= 195 || y1 < 5)
            dy1 *= -1;
            
       if (++counter > 50) {
            drawing.graphics.lineStyle(1, 0x000000);
            drawing.graphics.moveTo(x2,y2);
            drawing.graphics.lineTo(x3,y3);
            if ((x2 += dx2) >= 315 || x2 < 5)
                 dx2 *= -1;
            if ((y2 += dy2) >= 195 || y2 < 5)
                 dy2 *= -1;
            if ((x3 += dx3) >= 315 || x3 < 5)
                 dx3 *= -1;
            if ((y3 += dy3) >= 195 || y3 < 5)
                 dy3 *= -1;
       }
       
       if (counter > 250)
            counter = 51;
                 
       // Draw The Screen
       buffer.draw(drawing, drawing.transform.matrix);
       bitmap.draw(buffer);
  }

  P.S. - Is there a way I can post my code in a small box with a scroll bar?

  You get a slow down because you are filling the shape to your drawing with vectors and never cleaning. You need to publish periodically a drawing.graphics.clear () to clear all these vector lines. You can play with it, but as a simple solution, you can replace the line:

  If (counter > 250)

  counter = 51;

  with this:

  If {(counter > 250)
  counter = 51;
  Drawing.Graphics.Clear ();
  Color1 = uint (0xFFFFFF * Math.random ());

  }

• WRT320N slows down the speed of connection - terms of support of Linksys problem

  My internet connection speed slows down to about half of it is normal speed (or worse) until I have restart my router WRT320N. I see on the net that MANY other people have the same problem and can't seem to find a solution to this problem.

  I have the latest version of the firmware installed and I have the upnp is off

  I was told recently by a representative of Linksys Chat to perform this procedure, and I was wondering if anyone has tried and there set the coupling apparently daily slowdown that set in a reboot of the router for another day or two

  Here is the procedure that I was instructed to do...
  I was told disconnest the modem to the router-connect "than a PC ONLY" via a wired port #4 - reset the router by holding the button of reset in 30 seconds - switch off the router Linksys for 20 seconds and then turn it back on - check the LEDs of the Linksys router to make sure that the power, WLAN and port #4 are lit on the Linksys router. -clone the MAC - change "Mixed" wireless settings - name - change to 20 Mhz channel bandwidth and network use standard channel 11 - and in - use the Mode personal WPA - security settings and set my WPA pre-shared key password
  Before shutting down the PC and router - reconnect the modem to the router and the PC to the router - then make sure that the modem, the router and the PC are disabled for cycle a minute and the power of their back on with the modem being first - then turn on the router and last the PC

  Has anyone tried this, and he had to fix this downturn?

  Thanks in advance

  Well it's been 6 days that I woke up this morning and turned on the router and the modem from power overnight or lower I did after question troubleshooting the slow speed in the night before, does not

  I consistantly get in the 2 to 3% of the broadband speed I pay for - but I have no idea what fixed the issue

  So I'll mark it as "Resolved" and just hope that it comes not back again

  Thanks for the recommendations Klatch

• Is it possible to slow down the entire timeline on board animate CC?

  As the title suggests, is it possible to slow down the entire timeline?

  My animated movie is ready, but when I see it, the speed is high.

  I'm a total newbie in CC animate... I hope to hear soon!

  Try to stretch the animation on the timeline to the desired length. If say you need it for the last 2 seconds, make sure that it ends at the brand of 0.02.

• Slow down the speed of FAR FAR AWAY in iMovie 10.1

  In iMovie 10.1 FAR FAR AWAY effect scrolls too fast and I don't think I should buy a market after effect fix a bug. How can I slow down the speed of the text please?  Roll the credits cost $20 and it will not work with updates so it is not an option, in addition to its construction in already, it is adjustable and now is not!  HELP PLEASE

  See that work around posted by Vanessa D 19 dec in this link

  Slow down the title Far Far Away in iMovie 10.1?

  I don't use version 10 so can't comment, but the link it seems to work.

• is it possible to slow down the speed of scrolling text in the distance away from text generator?

  I'm trying to slow down the speed of text scrolling in the distance away from text generator.  Is it possible to make the text scrolls more slow?

  Stretch it to extend it.

• How to slow down the audio Windows Player speed, for language learning purposes?

  How to slow down the audio Windows Player speed, for language learning purposes?

  I assume you mean videos with speeches.

  1. start playback of the video.

  2 right click on the video then go it to improvements then the playback speed settings.

  You can control the speed of this Panel.

• I have 2 accounts directors and 1 standard account on my computer, it will slow down the speed of the computer

  I have 2 accounts directors and 1 standard account on my computer, it will slow down the speed of the computer, or if I have just 1 Administrator account it will make computer run faster

  N °

  Unless you are logging in to each account and switching between them - have each user run a lot of things.  Now * that * could slow down the computer.

  Otherwise, it's just - unused accounts unless you connect to them.  Again, storage space and unil you get below a few GB of free it - not no more worries.