Timer Interrupt.

Hello.

I want to simulate a break in the timer. For this, I have two parallel while loops.

The first has a structure of the event.

The second has a vi 'out of time '.

I'm feeding the output "Out of time" to the "time up"vi in the events that trigger the structure of the event, but it doesn't seem to work."

Please see the attached vi.

Any suggestions?

Thank you very much.

Vasilis.

Hi Sylvie,.

No, ElapsedTime isn't "global variable".

It is a VI - and is local whenever you place on the comic! (This is called reentrancy in LabVIEW).

Tags: NI Software

Similar Questions

Desgning a VI that time / interrupts a film according to the input signal

Basically, what I'm trying to do is to design a VI who plays or pauses a movie according to the signal it receives. This VI will be used with an EEG device, and what I want to do is play the movie if the signal exceeds a certain threshold, and it stops if this isn't, in other words a VI that responds to neurofeedback.

As I don't have access to the equipment of the GET yet, I use a sine wave at the moment than the EEG signal in VI of the attachment in this post (which of course will be later replaced by waves of EEG recording), and what I want to do is to read the film if the signal is greater than 0 and put the film on hold if the signal is less than 0. Any help would be appreciated

Kind regards

varkong

I have included the code for the LV8.6 version.

Concerning

Prashant

RT OS timer interrupts problem

I already posted this in the PXI forum, but someone suggested that I might get more results here. Sorry in advance if I do not abuse the forum.

I'm with a RT OS PXI system. It was working fine until I upgraded to 2013 LabWindows/CVI. There seems to be a problem of context switching; I describe the best I can and see if there were others with a simular problem.

The section of my code that has the problem, that's where I'm trying to measure the effect of a RC filter by injecting a DC signal to an external device that has its own system of signal acquisition. The external unit is communicated to the via CAN. The DC signal is generated by a DAC in my PXI system. My system has PXI also of a device CAN only control in my application.

Here are the steps of my software.

(1.) one CAN message to my external signal acquisition system to start to acquire a waveform of 100 samples at a sampling frequency of 150us. The waveform is long of 15 ms.

2.) p for 5 ms

(3.) the DAC to a voltage

4 charge.) external device signal and record in a file.

So while sleeping for a bit, before defining the DAC, I'll see the effect of my RC filter in the system externally produced waveform acquisition.

When I got LabWinodws/CVI 2012 it worked fine, but now it seems that changes before that my external device output DAC receives the message BOX to launch the acquisition.

Here are some of the complexities of the system.

The CAN message is sent on a thread separted then use the function PostDeferredCallToThread() to this post.

Immediately after I fall asleep so the RTmain() function may allow this lower priority thread (CAN message) to run.

Then I put the output DAC.

Here's the code that publishes the CAN and sets the french.

PostDeferredCallToThread (ActOnStartAbsorptionMeasurement & g_InputVoltage [g_InputVoltageptr], g_mainThreadID); sending message CAN
5 ms delay

timerTracker = GetTimeUS();
timerTracker += 5 000.
SleepUntilUS ((unsigned long) timerTracker);

the value of the DAC
(void) SetDACoutput (VoltageLevel);

Here's what I do in the RTmain()

While (!.) () RTIsShuttingDown &! gDone)
{
/ * Your code. */

/ * Sleep for a while to give the rhythm to the loop * /.
/ * and to allow the lower run priority threads. */
timerTracker = GetTimeUS();
timerTracker += RT_MAIN_SLEEP_TIME; RT_MAIN_SLEEP_TIME is 400us
SleepUntilUS ((unsigned long) timerTracker);
ProcessSystemEvents ();

}

I appreciate all help. Thanks in advance

I think I had a problem on status of race with the BOX and I found something on the CAD was taking too long. I managed to find a work around, but still do not have what happened between LabWindows/CVI 2012 and 2013.

In the control loop time interval and simultaneous measurement

Hello world

I just started to learn labview so please do not judge my messy programming

I want to constantly measure certain values (humidity, temperature, etc.) and once a certain threshold is crossed, I want to activate a device. Measure and activating things works perfectly if used separately. If I combine it and measure for awhile (10 samples at 100 Hz continuous playback mode) I get the error 200279 "attempted to read samples that are no longer available.

If I use (100 samples to read 100 Hz n samples) it measures for some time (interrupted manually after 4 hours), but I recognized that there was a gap of time of half an hour between the timem system and the 'real' time shown in the table.

Oh, and this isn't really critical time. It is enough if it measures one sample per 5 seconds or more.

Is there a quick fix and dirty for this?

Thank you for your very long in advance.

Hendrik

event data for the asynchronous timer

My application uses an asynchronous timer to read analog and digital signals that are then loaded in a thread safe queue. The main part of the application unloads the queue, displays values and updates the locations of graph and also writes data to a file on disk.

Asynchronous timer runs every 40 millisecs, show various updates run 5 times per second and the data is written to a file every second.

Among the data elements is an entry SSI of lifting height, which, at this data rate should be increased to 25mm per second, or 1 mm each scan. I get a lot of variations in this reading, ranging from 0.3 mm to 1.7 mm and these variations seem to occur during updates of the display or the data file is written. I thought that using the async timer I would be safe from Windows Update problems, it runs in a separate thread.

An earlier version used a timer Panel in which I was able to use the event data to show that timer interruptions were indeed affected by the activity of the screen. The async timer event data seem to zeros, whereas the event data of timer Panel that held a version of the hour and the time elapsed since the last interruption of the timer. How can I check that the async timer is interrupted at the right time?

Reminder timer Asyncronus has the same exact structure of the timers UIR one, except for the first parameter, an integer that in the reminder timer UIR, holds the handle of the Panel the timer while it is reserved in the callback of the asynchronous timer. This means that the eventData parameter holds the information on the time elapsed in th eprogram, passed as pointers to values double. To read this information, you must operate this way:

totalTime double, timeFromLastTimer;

totalTime = *(double *) eventData1; Time to start the program

timeFromLastTimer = *(double *) eventData2; The last reminder of timer time

WIFI connection is very unstable

OK, I recently started having problems with my wireless network. Before we continue, I want to clarify that the laptop fell off my table of landing itself directly on the wireless network card and of course, it's while my question has been raised. But, I hope this isn't the case and that no internal damage was done because it fell away and he doesn't seem to be serious damage.

My connection is very unstable. At that time I will have spent typing this I will have lost once. Once every 2-5 minutes. When I lose my connection I just remove and reinsert the card. It usually works. Sometimes, I get a message asking me to install new hardware, the PCMCIA MTD-0002. And other times it just re - acquired my IP address and run a little longer.

I looked around the internet a little and found many with the same question. Zero with an answer that worked for me, then again with a Toshiba laptop. I hope that you the pros here can help me out. The first thing I tried was to get a new driver. But in my device manager it says that they are all up to date and I have not had any other experience download from sites, and I don't want to get hurt.

I'm running on a Toshiba Satellite, I believe that it is a type R, further I don't really know. He's OLD. If there is more you need to know that I will answer quickly.

Thanks in advance.

Hello

Like you said that the issue was raised after the laptop is dropped.
In my opinion it's a reason from time to time interrupts him. Maybe some connections are loose.

The external PCMCIA card is recognized and don t think that this could be a software or driver problem.
But to be sure, you can contact the support of the manufacturing of PCMCIA card.

In any case, I think the problem is related to the fall and the technician must check the slot.

Problems of crash (blue screen)... Process of SVCHOS questions?

HI all, one of my vendors of malware and after back and forth emails and analysis. A determined that my SVCHOS process are involved. I'm blocking during the analysis complete running anti virus and malware packages on my PC. During smart scans or individual analysis of files and directories, there are no crashes. I use IObit and moy.

On C: drive I have that files of Windows and various software files containing program packages that I use. All data and so on is kept on an E drive and it is external.

Can someone cause Adviser where to look to fix. And also, if the upgrades to Windows 10 it will solve... (Windows 10 has been improved, by me at the end of July this year).

I think a little off here to say a source remote access to my PC. Is this possible via the functions of SVCHOS process?

Thanks heaps.

Bye now.

JL

0: kd > .bugcheck
Code 00000101 Bugcheck
Arguments 00000000'00000061 00000000'00000000 fffff880'009e7180 00000000 00000001'

Processor 1 # hung to graduations to 61.

0: kd >! IPB 1
IPB for 1 processor to fffff880009e7180:
Current IRQL - 0
Net - Current fffff880009f1f40 next fffffa8009582690 slow fffff880009f1f40
CPU Index number (0, 1) GroupSetMember 1 2
County of interruption - 04c 31238
Time - Interrupt the Dpc 00008981 00006878
Kernel 00431b2a user 0009c3d8

Note our IPB for xxx corresponds to the 3rd arg in bug control.

0: kd >! IRQL
Debugger saved IRQL for processor 0 x 0-13

Check for processor #0, called the bug as the IRQL is 13 - IRQL CLOCK_LEVEL.

0: kd > k
Call child-SP RetAddr site
fffff880 '0d6c4318 fffff800' 034e47fa nt! KeBugCheckEx

See?

Processor 0 # also sent the clock interrupt.

D1: hal fffff80003a344f0! HalpHpetClockInterrupt (KINTERRUPT fffff80003a34460)

0: kd > knL
# Child - SP RetAddr call Site
00 fffff880 '0d6c4318 fffff800' 034e47fa nt! KeBugCheckEx
01 fffff880 '0d6c4320 fffff800 03497077' nt! : FNODOBFM: 'string' + 0x4e1e
02 fffff880 '0d6c43b0 fffff800' 03a0e895 nt! KeUpdateSystemTime + 0 x 377
03 fffff880 '0d6c44b0 fffff800' 03488e13 hal! HalpHpetClockInterrupt + 0x8d / / here
04 fffff880'0d6c44e0 fffff800'03461821 nt! KiInterruptDispatchNoLock + 0 x 163
05 fffff880 '0d6c4670 fffff800' 037482bf nt! KeFlushProcessWriteBuffers + 0 x 65
06 fffff880 '0d6c46e0 fffff800' 03795f86 nt! ExpGetProcessInformation + 0x7f
07 fffff880'0d6c4830 fffff800'037969 d 9 nt! ExpQuerySystemInformation + 0xfb4
08 fffff880 '0d6c4be0 fffff800' 0348bb53 nt! NtQuerySystemInformation + 0x4d
09 fffff880 '0d6c4c20 00000000' 7774df1a nt! KiSystemServiceCopyEnd + 0x13
0 a 00000000' 00a3d7d8 00000000'00000000 0x7774df1a

See frame #03.

The interruption of clock sent system ultimately (time Windows) to maintain synchronization, but processor #1 has not responded for 61 seconds so the bug control has been called.

If we check the interrupt descriptor table, we can see if the IPI.

E1: fffff800034972f0 nt! KiIpiInterrupt

As the IPI has occurred, this tells us one of our functions in the stack of the processor 0 required a PII.

Tip - its chassis #05, nt! KeFlushProcessWriteBuffers + 0 x 65.

Any kind of flushing (TLB, etc.) requires an interruption of the inter (IPI) processor as it is a work of several processor. Each unique processor to do this.

0: kd >! IPI

State of the PII for processor 1

As a receiver, unsupported applications are waiting for processor (s) 0.

TargetCount 0 PacketBarrier 0 IpiFrozen 5 [gel target] / / Frozen

Processor 0, active query type: package ready
WorkerRoutine fffff8000347e7f0 (nt! xHalReportIdleStateUsage)
Parameter [0] parameter 0 [1] parameter 0 [2] 0

0: kd > ~ 1
1: kd > k
# Child - SP RetAddr call Site
00 00000000'00000000 00000000'00000000 0 x 0

Transition to our processor that has failed, it is cancelled. Nothing.

So, let's dig in the stock battery.

fffff880 '0d6c3c08 fffff800' 0357dfd6 nt! KeBugCheck2 + 0xac6
fffff880'0d6c3c10 fffff800'00000101
fffff880 '0d6c3c18 00000000' 00000061
fffff880 '0d6c3c20 00000000' 000004 d 0
fffff880 '0d6c3c28 fffffa80' 0db07b50
fffff880'0d6c3c30 00000000 00000001'
fffff880 '0d6c3c38 fffff880' 0d6c3d40
fffff880 '0d6c3c40 fffffa80' 0db07b50
fffff880'0d6c3c48 fffff880'04527190 int + 0 x 2190
fffff880 '0d6c3c50 fffffa80' 0bbc9000
fffff880 '0d6c3c58 fffffa80' 0db07b50
fffff880 '0d6c3c60 00000000' 0bb9f500
fffff880'0d6c3c68 00000000' 00000000
fffff880 '0d6c3c70 fffff800' 0360be80 nt! KiInitialPCR + 0 x 180
fffff880'0d6c3c78 fffff800'00000000
fffff880 '0d6c3c80 fffffa80' 0813c5f0
fffff880'0d6c3c88 00000000' 00000000
fffff880'0d6c3c90 00000000' 00000000
fffff880'0d6c3c98 fffff800'00000003
fffff880'0d6c3ca0 00000000 00000001'
fffff880 '0d6c3ca8 00000000' 00040001
fffff880 '0d6c3cb0 00000000' 00000002
fffff880 '0d6c3cb8 fffff800' 035c331d nt! ExFreePoolWithTag + 0x22d

Free a block of memory pool on protected file IObit pilot and then we hit the bug control.

1: kd >! DPC
Type of processor KDPC function
1: Normal: 0xfffff880009eb9e8 0xfffff800035b0280 nt! PpmPerfAction

1: kd > dt nt! _KDPC 0xfffff880009eb9e8
+ 0 x 000 type: 0 x 13 cm
+ 0 x 001 importance: 0 x 3 cm
+ 0 x number 002: 0 x 101
+ 0 x 008 DpcListEntry: _LIST_ENTRY [0xfffff880 ' 009e9300 - 0xfffff880 ' 009e9300]
+ 0 x 018 DeferredRoutine: 0xfffff800'035 b 0280 nt Sub! PpmPerfAction + 0
+ 0 x 020 DeferredContext: 0xfffff880' empty 009e7180
+ 0 x 028 SystemArgument1: (null)
+ 0 x 030 SystemArgument2: (null)
+ 0 x 038 DpcData: 0xfffff880' empty 009e9300

DPC processor power management waiting to be repaired.

So I would bit much bet money that IObit is in conflict with AVG here, or is it just the issue itself. IObit is well enough known to be absolutely terrible. Not only in development but also morally - https://forums.malwarebytes.org/index.php?/topic/29681-iobit-steals-malwarebytes-intellectual-property/

Get rid of it.

Cisco router restarts randomly with Bus error

Cisco router restarts randomly with the following error:

System has been restarted by error of bus to PC 0x4183614C, speech 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013

I've pasted below see the chimneys and release the version.

view the stacks

Minimum factory chimneys:

Format name / free

5396/6000 inspect Init Msg

Subsystem SPAN 5368/6000

58920/60000 EEM Auto record Proc

Automatic start of 4772/6000 upgrade process

DIB 5164/6000 error message

HAND OF SASL 5396/6000

4968/6000 LICENSE DEFAULT AGENT

5368/12000 Init

4216/6000 update prst

4384/6000 VPN_HW_MIB_CREATION

5188/6000 RADIUS INITCONFIG

Update process random rom 2128/3000

8356/12000 SSH process

Stats URPF 5316/6000

Interruption of battery level:

Level named format / unused

Network interfaces 1 1484828 6284/9000

2 3264990 8548/9000 DMA/Timer Interrupt

3 1 8388/9000 PA Int management Manager

Console 4 115 8612/9000 Uart

External interrupt 5 0 9000/9000

NMI 7 223352 8564/9000 interrupt handler

Spurious interrupts: 11

System has been restarted by error of bus to PC 0x4183614C, speech 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013

Software of 2800 (C2800NM-ADVSECURITYK9-M), Version 12.4 (24) T, RELEASE SOFTWARE (fc1)

Technical support: http://www.cisco.com/techsupport

Updated Thursday 25 February 09 17:55 by prod_rel_team

Image text-base: 0 x 40011240, database: 0x42B41940

The failure of the system stack trace:

FP: 0X472252B8, RA: 0X4183614C

FP: 0 X 47225310, RA: 0X418312F8

FP: 0 X 47225348, RA: 0X41647DC0

FP: 0X472253A8, RA: 0X4164A8F4

FP: 0 X 47225428, RA: 0X4164B248

See the version

Cisco IOS software, 2800 Software (C2800NM-ADVSECURITYK9-M), Version 12.4 (24) T, RELEASE SOFTWARE (fc1)

Technical support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Updated Thursday 25 February 09 17:55 by prod_rel_team

ROM: System Bootstrap, Version 12.4 (1r) [hqluong 1r], RELEASE SOFTWARE (fc1)

availability of Cisco is 28 minutes

System returned to ROM by bus to the 0x4183614C PC error, address 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013

System image file is "flash: c2800nm-advsecurityk9 - mz.124 - 24.T.bin".

This product contains cryptographic features and is under the United States

States and local laws governing the import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third party approval to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. laws and local countries. By using this product you

agree to comply with the regulations and laws in force. If you are unable

to satisfy the United States and local laws, return the product.

A summary of U.S. laws governing Cisco cryptographic products to:

http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

If you need assistance please contact us by mail at

[email protected] / * /.

Cisco 2821 (revision 53.51) with 1036288K / 12288K bytes of memory.

Card processor ID FCZ1017732F

2 gigabit Ethernet interfaces

2 modules of virtual private network (VPN)

Configuration of DRAM is wide with parity 64-bit capable.

239K bytes of non-volatile configuration memory.

250880K bytes of ATA CompactFlash (read/write)

Configuration register is 0 x 2102

You want to use the tool interpreter of output for this work:

http://www.Cisco.com/pcgi-bin/support/OutputInterpreter/home.p

For more information about the resolution of crashes, see this article:

http://www.Cisco.com/en/us/products/HW/IAD/ps397/products_tech_note09186a00800b4447.shtml

In this case, it looks like CSCsy09250, described here:

http://www.Cisco.com/en/us/products/CSA/Cisco-SA-20100324-SCCP.html

You should contact Cisco for the software updated by following the instructions of this bulletin.

That crash possibly caused by part of sone intentionally sends out packets malformed to your device, so if you have reason to believe that someone in your community could run metasploit or similar "Penetration Testing" tools, you can look into that as well.

VM seems to restart after DRS vmotions to different host

One of my vm has been migrated to host a (esx 3.5) to host b (esx 3.5). When I checked the log of the virtual machine (32-bit RHEL5), all services seemed to have been restart without the virtual machine after being powerrd, handed on, shut down or a loss of power. I have not seen this before... what caused this and how it can be prevented.
Side esx:
DRS migrated mohamed of esx - 7sc to esx - 6sc cluster Cluster CLS in X
Info 2010-01-14 12:44:40 Changed allocation of resources mohamed
Info 2010-01-14 12:44:23 migration mohamed off-host esx - 7sc x
Info 2010-01-14 12:44:04 mohamed migrating from esx - 7sc to esx - 6sc x
Info 2010-01-14 12:44:04 task: migrating virtual machines
The virtual machine
Jan 14 12:40:52 foreign syslogd 1.4.1: restart.
Jan 14 12:40:52 core of study abroad: klogd 1.4.1 source journal = / proc/kmsg began.
Jan 14 12:40:52 core of study abroad: Linux version 2.6.18 - 164.10.1.el5 ([email protected]) (gcc 4.1.2 version 20080704 (Red Hat 4.1.2 - 46)) #1 SMP Wed Dec 30 18:35:37 EDT 2009
Jan 14 12:40:52 core of study abroad: map of physical RAM provided BIOS:
Jan 14 12:40:52 core of study abroad: BIOS-e820: 0000000000010000 - 000000000009f800 (usable)
Jan 14 12:40:52 core of study abroad: BIOS-e820: 000000000009f800 - 00000000000a 0000 (reserved)
Jan 14 12:40:52 core of study abroad: BIOS-e820: ca 00000000000 000 - 00000000000cc000 (reserved)
Jan 14 12:40:52 core of study abroad: BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Jan 14 12:40:52 core of study abroad: BIOS-e820: 0000000000100000 - 000000003e6f0000 (usable)
Jan 14 12:40:52 core of study abroad: BIOS-e820: 000000003e6f0000 - 000000003e6ff000 (ACPI data)
Jan 14 12:40:52 core of study abroad: BIOS-e820: 000000003e6ff000 - 000000003e700000 (ACPI NVS)
Jan 14 12:40:52 core of study abroad: BIOS-e820: 000000003e700000 - 000000003e800000 (usable)
Jan 14 12:40:52 core of study abroad: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Jan 14 12:40:53 core of study abroad: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jan 14 12:40:53 core of study abroad: BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
Jan 14 12:40:53 core of study abroad: 104 MB HIGHMEM available.
Jan 14 12:40:53 core of study abroad: 896 MB LOWMEM available.
Jan 14 12:40:53 core of study abroad: found SMP MP-table at 000f6cd0
Jan 14 12:40:53 core of study abroad: memory for the allowable range of kernel notwithin (0 x 0 to 0 x 0) crash
Jan 14 12:40:53 core of study abroad: disabling kdump(1)
Jan 14 12:40:53 core of study abroad: using x 86 segment limit to approach the protection NX
Jan 14 12:40:53 core of study abroad: this DMI.
Jan 14 12:40:53 core of study abroad: using APIC driver default
Jan 14 12:40:53 core of study abroad: ACPI: PM - timer IO Port: 0 x 1008
Jan 14 12:40:53 core of study abroad: ACPI: LAPIC (acpi_id0x00 active lapic_id0x00)
Jan 14 12:40:53 core of study abroad: processor 0 # 06:15 APIC version 17
Jan 14 12:40:53 core of study abroad: ACPI: LAPIC_NMI (acpi_id0x00-lint0x1 of high edge)
Jan 14 12:40:53 core of study abroad: ACPI: IOAPIC (id0x01 address0xfec00000 gsi_base [0])
Jan 14 12:40:53 core of study abroad: IOAPIC [0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
Jan 14 12:40:53 core of study abroad: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge of)
Jan 14 12:40:53 core of study abroad: activation APIC mode: dish. 1 i/o using APICs
Jan 14 12:40:53 core of study abroad: using ACPI (EMAC) for SMP configuration information
Jan 14 12:40:53 core of study abroad: allocating from 40000000 PCI resources (gap: 3e800000:c0400000)
Jan 14 12:40:53 core of study abroad: TSC: frequency read hypervisor
Jan 14 12:40:53 core of study abroad: detected CPU 3000.106 MHz.
Jan 14 12:40:53 core of study abroad: 1 built zonelists. Total pages: 256000
Jan 14 12:40:53 core of study abroad: the kernel command line: ro root = / dev/VolGroup00/LogVol00 rhgb quiet
Jan 14 12:40:53 core of study abroad: FPU fast save and restore activation... done.
Jan 14 12:40:53 core of study abroad: allowing the use of unmasked SIMD FPU exception... done.
Jan 14 12:40:53 core of study abroad: initializing CPU #0
Jan 14 12:40:53 core of study abroad: CPU 0 irqstacks, hard soft c0762000 = = c0742000
Jan 14 12:40:53 core of study abroad: PID hash table entries: 4096 (order: 12, 16384 bytes)
Jan 14 12:40:53 core of study abroad: Console: color VGA + 80 x 25
Jan 14 12:40:53 core of study abroad: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jan 14 12:40:53 mcstransd of study abroad: mcstransd from
Jan 14 12:40:53 core of study abroad: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 14 12:40:53 core of study abroad: memory: 1006976 k/1024000 k available (kernel code of 2160 k, 16124 k reserved, 901 k data, 228 k init, 106432 k highmem)
Jan 14 12:40:53 core of study abroad: check if this processor honours the WP bit even in supervisor mode... Ok.
Jan 14 12:40:53 core of study abroad: (skipped) delay loop calibration, value calculated using the frequency of the clock... 6000.21 BogoMIPS (lpj = 3000106)
Jan 14 12:40:53 core of study abroad: v1.0.0 security framework initialized
Jan 14 12:40:53 core of study abroad: SELinux: during initialization.
Jan 14 12:40:53 core of study abroad: selinux_register_security: registration capacity secondary module
Jan 14 12:40:53 mcstransd of study abroad: initialized mcstransd
Jan 14 12:40:53 core of study abroad: LSM capacity initialized as secondary
Jan 14 12:40:53 core of study abroad: mount-cache hash table entries: 512
Jan 14 12:40:53 core of study abroad: CPU: L1 I cache: 32 K, cache L1 D: 32 K
Jan 14 12:40:53 core of study abroad: CPU: L2 cache: 4096 K
Jan 14 12:40:53 core of study abroad: Intel supported control of machine architecture.
Jan 14 12:40:53 core of study abroad: Intel machine check reporting enabled on CPU #0.
Jan 14 12:40:53 core of study abroad: 'hlt' instruction of control... Ok.
Jan 14 12:40:53 core of study abroad: the SMP alternatives: to get a code on the RISE
Jan 14 12:40:53 core of study abroad: alternatives freeing SMP: 14 k released
Jan 14 12:40:53 core of study abroad: ACPI: 20060707 basic review
Jan 14 12:40:53 core of study abroad: CPU0: Intel (r) Xeon 5160 CPU @ 3 .00GHz stepping 08
Jan 14 12:40:53 core of study abroad: Total of 1 processors enabled (6000,21 BogoMIPS).
Jan 14 12:40:53 core of study abroad: ENABLING IRQ IO-APIC
Jan 14 12:40:53 core of study abroad:... TIMER: vector = 0 x 31 apic1 = 0 Broche1 = 2 apic2 = - 1 pin 2 =-1
Jan 14 12:40:53 core of study abroad: using the local APIC timer interrupts.
Jan 14 12:40:53 core of study abroad: WARNING calibrate_APIC_clock: calibration of APIC timer can be a problem.
Jan 14 12:40:53 core of study abroad: grew up CPU 1
Jan 14 12:40:53 core of study abroad: check if the image is initramfs... it is
Jan 14 12:40:53 core of study abroad: free memory of the initrd: 3143 k released
Jan 14 12:40:53 core of study abroad: NET: registered protocol family 16
Jan 14 12:40:53 core of study abroad: ACPI: bus pci registered type
Jan 14 12:40:53 core of study abroad: PCI: entry revision 2.10 PCI BIOS to 0xfd9a0, last bus = 1
Jan 14 12:40:53 core of study abroad: PCI: using the configuration of type 1
Jan 14 12:40:53 core of study abroad: implementation of the standard PCI resources
Jan 14 12:40:53 core of study abroad: ACPI: active interpreter
Jan 14 12:40:53 core of study abroad: ACPI: IOAPIC using for the interrupt routing
Jan 14 12:40:53 core of study abroad: ACPI: no dock devices found.
Jan 14 12:40:53 core of study abroad: ACPI: PCI Root Bridge PCI0 (0000:00)
Jan 14 12:40:53 core of study abroad: PCI quirk: 1000-103f claimed by PIIX4 ACPI region
Jan 14 12:40:53 core of study abroad: PCI quirk: 1040-104f claimed by PIIX4 SMB region
Jan 14 12:40:53 core of study abroad: ACPI: PCI Interrupt Link INKA (IRQ 3 4 5 6 7 9 10 11 14 15) * 0, disabled.
Jan 14 12:40:53 core of study abroad: ACPI: PCI Interrupt Link LNKB (IRQ 3 4 5 6 7 * 9 10 11 14 15)
Jan 14 12:40:53 core of study abroad: ACPI: PCI Interrupt Link LNKC (IRQ 3 4 5 6 7 9 10 * 11 14 15)
Jan 14 12:40:53 core of study abroad: ACPI: PCI Interrupt link LNKD (IRQ 3 4 5 6 7 9 10 11 14 15) * 0, disabled.
Jan 14 12:40:53 core of study abroad: Linux Plug - and - Play Support v0.97 c Adam Belay
Jan 14 12:40:53 core of study abroad: pnp: ACPI PnP init
Jan 14 12:40:53 core of study abroad: pnp: ACPI PnP: found 12 devices
Jan 14 12:40:53 study abroad kernel: usbcore: registered new driver usbfs
Jan 14 12:40:53 study abroad kernel: usbcore: coupling new half registered
Jan 14 12:40:53 core of study abroad: PCI: ACPI using IRQ routing
Jan 14 12:40:53 core of study abroad: PCI: If a device does not work, try 'pci = routeirq '. If it helps, according to a report
Jan 14 12:40:53 core of study abroad: NetLabel: initialization
Jan 14 12:40:53 core of study abroad: NetLabel: hash of field size = 128
Jan 14 12:40:53 core of study abroad: NetLabel: protocols = without LABEL CIPSOv4
Jan 14 12:40:53 core of study abroad: NetLabel: no traffic allowed by default
Jan 14 12:40:53 core of study abroad: PCI: Bridge: 0000:00:01.0
Jan 14 12:40:53 core of study abroad: window of IO: disabled.
Jan 14 12:40:53 core of study abroad: window MEM: disabled.
Jan 14 12:40:53 core of study abroad: Windows PREFETCH: disabled.
Jan 14 12:40:53 core of study abroad: NET: registered to the family of protocols 2
Jan 14 12:40:53 core of study abroad: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 14 12:40:53 core of study abroad: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jan 14 12:40:53 core of study abroad: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jan 14 12:40:53 core of study abroad: TCP: Hash tables configured (established 131072 bind 65536)
Jan 14 12:40:53 core of study abroad: TCP reno registered
Jan 14 12:40:53 core of study abroad: Simple Boot Flag to 0 x 36 set to 0x80
Jan 14 12:40:53 core of study abroad: apm: BIOS version 1.2 flags 0 x 03 (Driver version 1.16ac)
Jan 14 12:40:53 core of study abroad: apm: replaced by ACPI.
Jan 14 12:40:53 core of study abroad: audit: (disabled) netlink socket initialization
Jan 14 12:40:53 core of study abroad: type = audit(1263490801.693:1) 2000: initialized
Jan 14 12:40:53 core of study abroad: highmem bounce pool size: 64 pages
Jan 14 12:40:53 core of study abroad: HugeTLB Total allocated memory, 0
Jan 14 12:40:53 core of study abroad: VFS: disk quotas dquot_6.5.1
Jan 14 12:40:53 core of study abroad: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan 14 12:40:53 core of study abroad: initialize Cryptographic API
Jan 14 12:40:53 core of study abroad: alg: no test for crc32c (crc32c-generic)
Jan 14 12:40:53 study abroad rpc.statd1790: departure from the Version 1.0.9
Jan 14 12:40:53 core of study abroad: ksign: installation of the public key data
Jan 14 12:40:53 core of study abroad: loading keyring
Jan 14 12:40:53 core of study abroad:-Add public key 1A9118D63F4F2E5A
Jan 14 12:40:53 core of study abroad :-ID user: Red Hat, Inc. (Kernel Module GPG key)
Jan 14 12:40:53 core of study abroad: registered io scheduler noop
Jan 14 12:40:53 core of study abroad: early io registered Planner
Jan 14 12:40:53 core of study abroad: period registered io Scheduler
Jan 14 12:40:53 core of study abroad: io Scheduler cfq registered (default)
Jan 14 12:40:53 core of study abroad: limitation of direct transfers of PCI/PCI.
Jan 14 12:40:53 core of study abroad: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 14 12:40:53 core of study abroad: ACPI: processor CPU0 (supports 8 throttling States)
Jan 14 12:40:53 core of study abroad: Real Time Clock Driver v1.12ac
Jan 14 12:40:53 core of study abroad: no volatile memory driver v1.2
Jan 14 12:40:53 core of study abroad: Linux agpgart interface v0.101 (c) Dave Jones
Jan 14 12:40:53 core of study abroad: agpgart: Chipset Intel 440BX has detected.
Jan 14 12:40:53 core of study abroad: agpgart: AGP aperture is 256 M @ 0x0
Jan 14 12:40:53 core of study abroad: series: 8250/16550 pilot $Revision: 1.90 $4 ports, IRQ sharing enabled
Jan 14 12:40:53 core of study abroad: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550
Jan 14 12:40:53 core of study abroad: serial8250: ttyS1 to I/O 0x2f8 (irq = 3) is a 16550
Jan 14 12:40:53 core of study abroad: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550
Jan 14 12:40:53 core of study abroad: 00:0 a: ttyS1 to I/O 0x2f8 (irq = 3) is a 16550
Jan 14 12:40:53 core of study abroad: brd: module loaded
Jan 14 12:40:53 core of study abroad: uniform cross-platform E-IDE driver revision: 7.00alpha2
Jan 14 12:40:53 study abroad kernel: ide: assuming that the speed of the bus system 33 MHz for modes PIO; Override with idebus = xx
Jan 14 12:40:54 core of study abroad: PIIX4: controller IDE PCI slot 0000:00:07.1
Jan 14 12:40:54 core of study abroad: PIIX4: chipset revision 1
Jan 14 12:40:54 core of study abroad: PIIX4: 100% not native mode: will probe IRQS later
Jan 14 12:40:54 core of study abroad: ide0: BM - DMA at 1050 0 x - 0 x 1057, the BIOS settings: had: DMA, hdb:pio
Jan 14 12:40:54 core of study abroad: had: VMware Virtual CDROM IDE Drive, ATAPI CD/DVD-ROM drive
...
Jan 14 12:41:01 gpm2232 of study abroad: * info http://startup.c (95):
Jan 14 12:41:01 gpm2232 of study abroad: started GPM. demon entry Mode.
Jan 14 12:41:14 rhnsd2604 of the study abroad: Red Hat Network Services demon commissioning.
Jan 14 12:41:20 smartd2691 of the study abroad: smartd version 5.38 i686-redhat-linux-gnu Copyright (C) 2002-8 Bruce Allen
Jan 14 12:41:20 smartd2691 of the study abroad: Homepage is http://smartmontools.sourceforge.NET/
Jan 14 12:41:20 smartd2691 of the study abroad: opens the /etc/smartd.conf file configuration
Jan 14 12:41:20 smartd2691 of the study abroad: /etc/smartd.conf file parsed Configuration.
Jan 14 12:41:20 study abroad smartd2691: Device: / dev/sda, open
Jan 14 12:41:20 study abroad smartd2691: Device: / dev/sda (SMART) IE not enabled, skip device Try 'smartctl s on/dev/sda' to turn on SMART features
Jan 14 12:41:20 smartd2691 of the study abroad: cannot save SCSI device/dev/sda to line 32 of the /etc/smartd.conf file
Jan 14 12:41:20 smartd2691 of the study abroad: Device/dev/sda not available
Jan 14 12:41:20 smartd2691 of the study abroad: monitoring ATA 0 and 0 SCSI devices
Jan 14 12:41:20 smartd2693 of the study abroad: smartd a fork () ed in background mode. The PID = 2693.

The time is accurate? Because VMotion started 4 minutes later according to the newspapers.

---

MCSA, MCTS, VCP, VMware vExpert 2009

http://blog.vadmin.ru

First time installation on Satellite L500-1XD was interrupted

I turned on a Satellite L500-1XD for the first time this morning and during the first installation, the current was interrupted. It now takes an age to complete the installation.
Is this normal?

Is there something I can do?

Thank you.
JD

What to say?
One thing is clear here: power failure while the first installation runs is not normal and should not happen.
So, now, how to tell if this is normal or not when it should not happen at all. Do you believe that none of us in the intention just to see how it works?

Anyway, there is no other choice for you except to wait and hope that everything will be fine.
Unlike the pre-installed recovery image is destroyed and you won't be able to install it at all.

Please send some feedback soon.

Typical time a request for interruption takes between RT LV and LV FPGA.

Currently, I don't have the equipment to test it, and I was looking for some statistics calendar all the time it takes for a request for interruption to process between LV RT and FPGA LV (LV RT generate the interrupt request, waiting LV RT on ack, LV FPGA get query pause and LV FPGA ack, LV RT continue). I know that the interrupt request has a priority higher loop timed on LV RT, and a concern for this issue, let me say that the FPGA LV does not what whatsoever between the receipt of the interrupt request and receipt.

Does anyone have any time?

Hello Michel_Gauvin,

I found the following article in the knowledge base that may answer your questions:

Landmarks of Module time real LabVIEW for Applications in the LabVIEW FPGA Module

I hope this helps!

Kind regards

"Waiting for in time (RT PXI target) real answer" error when the program is waiting interruptions

Hello

I developed an application to detect interruptions generated by an electronic card and act accordingly. The program was developed in labview, but she calls a dll; created with labwindows. The dll is scheduled to open the visa communication, select the events and install the interrupt handler and when an interruption is detected, it reads the value of the different registers of the map and returns to labview to view.

The problem is that when the program expects an interruption, a prompt appears with the message "Waiting for real-time (RT PXI target) real answer" and the only option I have is to click on the button to disconnect the pxi or just wait. If I wait and I generate an interrupt, the prompt disappears and the application view data as it was planned.

To wait for the following code the interruption has been programmed into the function:

While (flag == 0)

{

Sleep (1000);

}

When an interruption occurs, the value of flag set to 1 and function continues without any problem. I am not really sure, but here is probably the problem and it probably isn't the best way to wait for a break because the sleep function suspends the thread to the configured time, but at least the load calculation in the PXI is between 0 and 1%. I was wondering if anyone knows how to wait for a break without 'lost' communication with PXI and if there is a better way to do it.

Any response will be welcome and thank you for them,

Jaime

Hey there.

You see problems with connectivity it's because the thread by DEFAULT CallLibrary nodes running in is the UI (UI) thread - UI thread manages also the important things like, say, communications (especially all the connections for the VI server) and other things that you could run all the time. A CallLibraryNode is not, by default, intended to be used to execute code that runs for a long period of time. If you want to do this, you assign the execution of the CallLibrary node to run in the context of a LabVIEW run-time engine thread (by selecting to make it work "in any thread") and not the UI thread. This can be done through the properties of the CallLibraryNode. By selecting "run in any thread" the call DLL will be generally in the context of the thread running in the run LabVIEW, which is usually what is meant when even. The VI CallLibraryNode color change of Orange (UI) to blue (LabVIEW thread) so that you can quickly tell what context the appeal will be in.

The reason the interface thread user is the default thread is because most often DLLS calls need to be serialized (because of functions is not not thread-safe) and so it serves to protect the integrity of the system. However, if you know your threads are thread-safe, or you will use these threads for a while, it is best to program the CallLibraryNode to use a Thread of LabVIEW execution rather than the UI thread.

For more information on this review on these pages:

https://decibel.NI.com/content/docs/doc-9069

http://zone.NI.com/reference/en-XX/help/371361J-01/lvexcodeconcepts/configuring_the_clf_node/

DLL' happy ing.

-Danny

Interruption of the timer for LED

Hello guys,.

My program has radio buttons for flashing control rate of LED. I have to interrupt (timer) to turn off the LED after 10seconds. Lets say SW0 is pressed, the led starts flashing 10 seconds and then turn off. Here, I have some problems, when I press SW0 and wait 3 seconds and press SW1 and press return SW0, the LED will turn off after 7 seconds. I guess that the timer is not reset to count 10 seconds, but saves his previous time.

Can someone explain what I am doing wrong?

Thank you!

ABSIAS

double post!

Please do not ask the same question in multiple threads.

stop 0 x 101: a clock interrupt has not received on a secondary processor within the allotted time interval.

Hello guys I'm looking through these forums for a long time, but recently this bsod crossed the line: I am so angry and I want to know what the problem is. So I'm going:

AMD Athlon Dual Core 6400 +.

Biostar TPower n750

Corsair 2048 MB 800 mhz

GeForce 9800GT amp! Edition

500 GB Maxtor Diamondmax22 hdd sata2

screen 19' yuraku

Ttied fi case Ariel (it looks like a beehive with air holes in the world) with a 120 mm fan on the back and another of 40 or 50 mm on the side

EZ supercool source w 550

LG dvdwriter, basic keyboard, basic optical mouse (logitech), basic logitech speakers

Dynamode 11n wireless pci card

I had installed on this pc WIndows Vista and after 1 year of error I coudnt repair it more.

I hae errors on Xp before I bought a Vista and now I have installed Windows 7 as a test.

Unfortunately, I received the error after 2 minutes of play Dark Orbit, the browser game. I noticed usually takes place when I play games the internet Explorer + or sometimes games + winamp.

I downloaded Windows Dbg and I started to analise errors: the results have been different because of some programs I had installed.

After reading a few reviews here, I've changed my antivirus AVG and my Ad-Aware malaware spyware Defender.

After these changes and installing windows 7, the error is like this. I will introduce the last and 4 that I analyzed:

Error 1

Loading dump file [C:\Windows\Minidump\120410-23680-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are available

Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 processors) free x 64
Product: WinNt, suite: TerminalServer SingleUserTS
By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
Computer name:
Kernel base = 0xfffff800 '02a5c000 PsLoadedModuleList = 0xfffff800' 02c99e50
The debugging session: 23:49:17.592 Sam 4 Dec 2010 (UTC + 0:00)
System Uptime: 0 days 0:17:39.294
Loading the kernel symbols
...............................................................
................................................................
.............................
Loading user symbols
Loading unloaded module list
.....
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

Use! analyze - v to obtain detailed debugging information.

Error checking 101, {61, 0, fffff880009ea180, 1}

Probably caused by: Unknown_Image (ANALYSIS_INCONCLUSIVE)

Follow-up: MachineOwner
---------

0: kd >! analyze - v
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in a
MP system in the meantime allocated. This indicates that the specified
the processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000061, Clock interrupt time out interval in nominal graduations.
Arg2: 0000000000000000, 0.
Arg3: fffff880009ea180, address the PRCB of the Hung processor.
Arg4: 0000000000000001, 0.

Debugging information:
------------------

BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_2_PROC

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

Nom_processus: System

CURRENT_IRQL: d

STACK_TEXT:
fffff800 '03fed938 fffff800' 02a7a443: fffff880 00000000'00000101 00000000'00000061 00000000'00000000 ' 009ea180: nt! KeBugCheckEx
"fffff800 '03fed940 fffff800' 02ad65f7: fffffa80 00000000' fffff800 ' 00000001 00000000'00002710 fffff880 ' 014de980: nt! : FNODOBFM: 'string' + 0x4e3e
fffff800 '03fed9d0 fffff800' 02a1d895: fffff800'02 has 42460 fffff800 '03fedb80 fffff800' 02a 42460 00000000 00000000': nt! KeUpdateSystemTime + 0 x 377
fffff800 '03fedad0 fffff800' 02aca3f3: 00000000 00000000' fffff800 '03fedb01 fffffa80' 025e9f00 00000000 00000001': hal! HalpHpetClockInterrupt + 0x8d
fffff800 '03fedb00 fffff880' 03d531f2: fffff800 '02adba3a 00000000 00000000' fffffa80' 02dfc868 00000000' 00000000: nt! KiInterruptDispatchNoLock + 0 x 163
fffff800 '03fedc98 fffff800' 02adba3a: 00000000 00000000' fffffa80 '02dfc868 00000000' ffffd399 00000000' 2e217e22: amdk8! C1Halt + 0x2
"fffff800 '03fedca0 fffff800' 02ad66cc: fffff800'02c46e80 fffff800 ' 00000000 00000000 00000000' fffff880 ' 00e45f44: nt! PoIdle + 0x53a
fffff800 '03fedd80 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x2c

STACK_COMMAND: kb

SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: Unknown_Module

Nom_image: Unknown_Image

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

Follow-up: MachineOwner
---------

0: kd > lmvm Unknown_Module
start end module name

Error 2
Loading dump file [C:\Windows\Minidump\120410-26598-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are available

Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 processors) free x 64
Product: WinNt, suite: TerminalServer SingleUserTS
By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
Computer name:
Kernel base = 0xfffff800 '02a 56000 PsLoadedModuleList = 0xfffff800' 02c93e50
The debugging session: 23:30:52.882 Sam 4 Dec 2010 (UTC + 0:00)
System Uptime: 0 days 0:04:50.584
Loading the kernel symbols
...............................................................
................................................................
...............................
Loading user symbols
Loading unloaded module list
....
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

Use! analyze - v to obtain detailed debugging information.

Error checking 101, {61, 0, fffff880009ea180, 1}

Probably caused by: Unknown_Image (ANALYSIS_INCONCLUSIVE)

Follow-up: MachineOwner
---------

0: kd >! analyze - v
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in a
MP system in the meantime allocated. This indicates that the specified
the processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000061, Clock interrupt time out interval in nominal graduations.
Arg2: 0000000000000000, 0.
Arg3: fffff880009ea180, address the PRCB of the Hung processor.
Arg4: 0000000000000001, 0.

Debugging information:
------------------

BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_2_PROC

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

Nom_processus: System

CURRENT_IRQL: d

STACK_TEXT:
fffff800 '00b9c938 fffff800' 02a 74443: fffff880 00000000'00000101 00000000'00000061 00000000'00000000 ' 009ea180: nt! KeBugCheckEx
fffff800 '00b9c940 fffff800' 02ad05f7: fffff880 ' fffff800 00000000' 00000001 00000000'00002710 00000000'00000000: nt! : FNODOBFM: 'string' + 0x4e3e
fffff800 '00b9c9d0 fffff800' 02a 17895: fffff800'02a3c460 fffff800 '00b9cb80 fffff800' 02a3c460 00000000' 00000000: nt! KeUpdateSystemTime + 0 x 377
"fffff800 '00b9cad0 fffff800' 02ac43f3: 00000000'00000000 00000000'00000001 fffffa80 ' 00000000 fffffa80 ' 031e6450: hal! HalpHpetClockInterrupt + 0x8d
fffff800 '00b9cb00 fffff880' 03e2a1f2: fffff800 '02ad5a3a 00000000' ffffffed fffffa80 '02d280a8 fffff800' 02c4ec40: nt! KiInterruptDispatchNoLock + 0 x 163
fffff800 '00b9cc98 fffff800' 02ad5a3a: 00000000' ffffffed fffffa80 '02d280a8 fffff800' 02c4ec40 00000000 00000001': amdk8! C1Halt + 0x2
"fffff800 '00b9cca0 fffff800' 02ad06cc: fffff800'02c40e80 fffff800 ' 00000000 00000000 00000000' fffff880 ' 03d0f480: nt! PoIdle + 0x53a
fffff800 '00b9cd80 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x2c

STACK_COMMAND: kb

SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: Unknown_Module

Nom_image: Unknown_Image

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

Follow-up: MachineOwner
---------

0: kd > lmvm Unknown_Module
start end module name

Error 3
Loading dump file [C:\Windows\Minidump\120410-36207-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are available

Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 processors) free x 64
Product: WinNt, suite: TerminalServer SingleUserTS
By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
Computer name:
Kernel base = 0xfffff800 '02a0f000 PsLoadedModuleList = 0xfffff800' 02c4ce50
The debugging session: 23:25:27.991 Sam 4 Dec 2010 (UTC + 0:00)
System Uptime: 0 days 2:14:52.692
Loading the kernel symbols
...............................................................
................................................................
..............................
Loading user symbols
Loading unloaded module list
.....
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

Use! analyze - v to obtain detailed debugging information.

Error checking 101, {61, 0, fffff880009ea180, 1}

Probably caused by: Unknown_Image (ANALYSIS_INCONCLUSIVE)

Follow-up: MachineOwner
---------

0: kd >! analyze - v
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in a
MP system in the meantime allocated. This indicates that the specified
the processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000061, Clock interrupt time out interval in nominal graduations.
Arg2: 0000000000000000, 0.
Arg3: fffff880009ea180, address the PRCB of the Hung processor.
Arg4: 0000000000000001, 0.

Debugging information:
------------------

BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_2_PROC

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

Nom_processus: System

CURRENT_IRQL: d

STACK_TEXT:
fffff800 '00b9c938 fffff800' 02a2d443: fffff880 00000000'00000101 00000000'00000061 00000000'00000000 ' 009ea180: nt! KeBugCheckEx
fffff800 '00b9c940 fffff800' 02a895f7: fffff880 ' fffff800 00000000' 00000001 00000000'00002710 00000000'00000000: nt! : FNODOBFM: 'string' + 0x4e3e
fffff800 '00b9c9d0 fffff800' 02ff6895: fffff800'0301 b 460 fffff800 '00b9cb80 fffff800' 0301b 460 00000000 00000000': nt! KeUpdateSystemTime + 0 x 377
"fffff800 '00b9cad0 fffff800' 02a7d3f3: 00000000 ' fffff800 00000202 '02a859fa fffffa80' 01bd6c20 fffff800 ' 02bb42dd: hal! HalpHpetClockInterrupt + 0x8d
fffff800 '00b9cb00 fffff880' 03fb71f2: fffff800 ' 02a8ea3a 00000000' fffffa80 0000001e ' 02e88398 fffffa80'03122480: nt! KiInterruptDispatchNoLock + 0 x 163
fffff800 '00b9cc98 fffff800' 02a8ea3a: 00000000' fffffa80 0000001e'02e88398 fffffa80 ' 03122480 fffffa80' 0455 c 410: amdk8! C1Halt + 0x2
fffff800 '00b9cca0 fffff800' 02a896cc: fffff800'02bf9e80 fffff800 ' 00000000 00000000 00000000' fffff880' 0416 c 480: nt! PoIdle + 0x53a
fffff800 '00b9cd80 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x2c

STACK_COMMAND: kb

SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: Unknown_Module

Nom_image: Unknown_Image

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

Follow-up: MachineOwner
---------

0: kd > lmvm Unknown_Module
start end module name

Error 4

Loading dump file [C:\Windows\Minidump\120510-17550-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are available

Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 processors) free x 64
Product: WinNt, suite: TerminalServer SingleUserTS
By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
Computer name:
Kernel base = 0xfffff800 '02a 67000 PsLoadedModuleList = 0xfffff800' 02ca4e50
The debugging session: 00:15:22.449 Sun 5 Dec 2010 (UTC + 0:00)
System Uptime: 0 days 0:25:01.151
Loading the kernel symbols
...............................................................
................................................................
.............................
Loading user symbols
Loading unloaded module list
.....
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

Use! analyze - v to obtain detailed debugging information.

Error checking 101, {61, 0, fffff880009ea180, 1}

Probably caused by: Unknown_Image (ANALYSIS_INCONCLUSIVE)

Follow-up: MachineOwner
---------

0: kd >! analyze - v
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in a
MP system in the meantime allocated. This indicates that the specified
the processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000061, Clock interrupt time out interval in nominal graduations.
Arg2: 0000000000000000, 0.
Arg3: fffff880009ea180, address the PRCB of the Hung processor.
Arg4: 0000000000000001, 0.

Debugging information:
------------------

BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_2_PROC

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

Nom_processus: System

CURRENT_IRQL: d

STACK_TEXT:
fffff800 '00b9c938 fffff800' 02a 85443: fffff880 00000000'00000101 00000000'00000061 00000000'00000000 ' 009ea180: nt! KeBugCheckEx
fffff800 '00b9c940 fffff800' 02ae15f7: fffffa80 ' fffff800 00000000' 00000001 00000000'00002710 fffff880'01673837: nt! : FNODOBFM: 'string' + 0x4e3e
fffff800 '00b9c9d0 fffff800' 02a 28895: fffff800'02a4d460 fffff800 '00b9cb80 fffff800' 02a4d460 fffffa80' 00000000: nt! KeUpdateSystemTime + 0 x 377
fffff800 '00b9cad0 fffff800' 02ad53f3: 00000000'00000000 00000000'00000001 fffffa80 '00000000 fffffa80' 03265340: hal! HalpHpetClockInterrupt + 0x8d
fffff800 '00b9cb00 fffff880' 03cb01f2: fffff800 '02ae6a3a 00000000 00000000' fffffa80' 02d9f7e8 00000000' 00000000: nt! KiInterruptDispatchNoLock + 0 x 163
fffff800 '00b9cc98 fffff800' 02ae6a3a: 00000000 00000000' fffffa80 '02d9f7e8 00000000' ffffd399 00000000' 2d666e22: amdk8! C1Halt + 0x2
"fffff800 '00b9cca0 fffff800' 02ae16cc: fffff800'02c51e80 fffff800 ' 00000000 00000000 00000000' fffff880 ' 00c0bf44: nt! PoIdle + 0x53a
fffff800 '00b9cd80 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x2c

STACK_COMMAND: kb

SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: Unknown_Module

Nom_image: Unknown_Image

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

Follow-up: MachineOwner

Hello

I suggest you to clear the CMOS and reset the BIOS to default settings. Contact the system manufacturer for assistance.

Thanks and regards.

Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think.

Error blue screen "a clock interrupt was not received on a secondary prossesser in the allotted time interval.

I get a blue screen that says that this A clock interrupt was not received on a secondary prossesser in the allotted time interval

* original title - an interruption of clock has not received on a secondary owner in the amount of time allocated Windows stops and I get a blue screen that says this *.

It is likely that your CPU is a failure.

However, before replacing, try this
1. If you are overclocking the processor, back to normal speed
2. To avoid overheating, get a can of compressed air and dust out of your computer
3. Go to the website of the manufacturer of the computer, download and install the latest drivers and BIOS for your model

Timer Interrupt.

Similar Questions

Maybe you are looking for