timers stopped when removable Panel

Similar Questions

• Smartphones to blackBerry ringtone stops when removed case

  The phone rings normally at the desired volume at all times EXCEPT when it sounds so that in the case and delete it. He then stops ringing for this call only. It sounds normally on any other appeal, whether in or out of the Holster. Only when it rings so that in the Holster and remove it it stops ringing for this call only.  Is it normal for the 8310?                                                                                              M

  Yes this is normal. I don't know why, but perhaps that when you pull out of the Holster the phone assumes that you will respond and it stops ringing.

• Satellite Pro L500 - stops when the power cord removed

  Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

  Someone please help. I have not installed anything new.

  Hey,.

  For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

  I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• How can you stop safely remove hardware to appear when there is nothing connected to the USB ports?

  Orifginal title: Aggrevation

  How can you stop safely remove hardware to appear when there is nothing connected to the USB ports? It is causing my screen lock and give an error does not.

  Hi ElginCarelock,

  You can try to restart the computer and check.

  Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer and check.

  Hope this information is useful.

• Why Photoshop stop when I touch the touchscreen on the lap top and I can avoid it?

  Every time I start Photoshop you stop with this message below saying that it has stopped working. I realized that it stops when I touch the screen. How can I avoid this and it is possible to work in Photoshop using the touchscreen?

  

  It is not normal that photoshop to complete when you touch the screen. Either something with photoshop is corrupt or the driver for the touch screen.

  First thing to try is reset the photoshop preferences. CTRL-k on windows or cmd - k on a mac, and at the bottom of the Panel is a button to reset the preferences.

  If this does not work, uninstall photoshop, restart your computer, reinstall photoshop.

  Next is to see if you can update the driver of the touch screen. Sorry I don't know how to do and would depend on if your windows or mac and what version of the operating system that you use.

  Finally run CC Cleaner

  http://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  This will remove all traces of Adobe programs on your computer. Restart the computer, and then reinstall the Manager then photoshop.

  I hope that one of the above will solve your problem, if not let us know.

• How can 13 Photoshop elements in Expert mode, I stop a control panel appeared at the bottom of every time I pass the tools?

  In Photoshop elements 13, in Expert mode, how can I stop a control panel appeared at the bottom of every time I pass the tools?  I'm just trying to compose by switching between the zoom and hand tool tool. Whenever I pass, a control panel appears. I have to manually hide the Panel each time. Which seriously disrupts the flow of what should be a task simple, zoom / move. I don't remember this annoying behavior in my previous versions of the software...  Can someone please advise me how I can stop? I thank very you much in advance!

  Lingyaiyai wrote:

  In Photoshop elements 13, in Expert mode, how can I stop a control panel appeared at the bottom of every time I pass the tools?  I'm just trying to compose by switching between the zoom and hand tool tool. Whenever I pass, a control panel appears. I have to manually hide the Panel each time. Which seriously disrupts the flow of what should be a task simple, zoom / move. I don't remember this annoying behavior in my previous versions of the software...  Can someone please advise me how I can stop? I thank very you much in advance!

  What you see is the tool options palette.

  The interface has been changed from 11 items on.

  It seems logical to view options when a new tool is selected. If you don't want to, look at the upper right of the tool options palette. You can open a menu in which you remove the check mark in the box to automatically display the tools/options.

  When you're accustomed to older versions of elements, it is a good idea to read the section on areas of work and the environment, in particular on the bins.

  Photoshop elements help | Photoshop elements help

• suddenly stops when the external usb hub is attached

  My imac 27 inches 5 k 2015 suddenly stops when an external USB hub is attached supposedly designed specifically for the mac. (Cutting) The mac does not start I have to unplug it and reconnect to restart. I tried different hubs of this manufacturer and all do the same thing. Remove the hub, the computer is fine. Any ideas?

  Well, try an another factory USB hub, I had good success with USB hubs powered from Belkin.

  Question... are the hubs help powered or are bus powered USB? They are bus powered USB is your problem, the USB ports on iMac didn't supply enough power to power bus-powered USB hubs.

• HP: Laptop randomly stops when it hits 15%

  He started only today. My laptop would randomly just turned off when the battery was low. When I checked the percentage it shows 15% when I turn on my laptop. I already checked power options, and everything is normal. I was wondering if anyone has solutions to this. In addition, I notice just that my phone would not charge from 90 percent. It would charge up to 90%. Thanks in advance.

  Hi @davevidduong,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that your laptop randomly stops when the battery is low. It will be a pleasure to help you here.

  A remarkable work has been done by checking the power options. You did awesome troubleshooting before you post your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and levels of technical knowledge.

  For clarity, I would need more information to help you best.

  Please let me know the product # computer.

  Have you checked if it stops when the charger is connected?

  This could be a hardware problem with the battery and we need to insulate it properly. In the meantime, please try a hard reset first. Steps to follow:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back.

  Then visit this link to update the bios and HP support assistant. Link: http://hp.com/drivers please select the country and follow the on-screen instructions. Once this please visit this link to run hardware diagnostics on the battery and other components. Link: http://support.hp.com/in-en/document/c03467259 if please run full diagnostics and note any failure code if a component fails. Mainly to run diagnostics on the battery. According to the information that you could later calibrate the battery.

  I really hope things the excellent work and the problem is solved without hassle. I hope this helps. Please let me know how it goes. Just to say thank youPlease click the ' Thumbs Up ' button to appreciate my efforts. If it helps, Please mark this "accepted Solution".

  Take care now and have a week coming Holy.

• Satellite Pro L10: CMOS clock stops when the OS is not running

  Hello

  We know a reason why the cmos clock would stop when the operating system does not (phone off), the laptop is 18 months old, I've updated the bios tries to give him a good boost, but no effect, he was also in charge for 24 hours.
  Any advice would be great.

  See you soon
  Paul

  Hello

  Usually if the BIOS date/time is wrong and always changes, the RTC battery which is mounted on the motherboard fails.
  In this case the CMOS battery needs to be changed or maybe only removed for awhile

  If your laptop is 18 months, the guarantee must be valid.
  Generally if you have registered on the page of Toshiba notebook the warranty covers all repairs for about 2 years (24 months).

  In this case, I would recommend contacting ASP in your country, because the technician must be able to solve this problem very easily.

  Good bye

• Qosmio F10 stops when I touch

  Hello world

  Since yesterday I have a problem with my F10.
  It is quite paranormal, so I give you the facts.
  -l' computer stops when I touch (when I close the screen, or touch down on the left)
  -After that, power light movies with this schema:
  1 long (white) 6 (white) shorts and 1 long x
  -to shut up again, I have to remove the battery and power, wait a bit, and it can be silent again.
  I have no software, no update, and it looks like a motherboard problem...
  Naturally, it is not under warranty more...
  So, if you have answers!
  Thank you to
  Eric

  Hi Eric

  If the DC In lamp sends a blink code it is probably a problem of electronic supply on the main map. Unfortunately, there is nothing to see. You must contact the partner of service authorized in your country.

  Good luck!

• Qosmio X 770-music stops when my TV shuts

  Hello!

  Okay, this sounds very strange, but I noticed that whenever I stop my TV (LG 42LD450) music on my laptop stops. At first, I thought it was the remote control, but it also stops when I stopped the TV by pressing the button on the TV itself. So I guess TV sends some infrared type signal to signal other devices it was off.
  It doesn't matter what software I use to play my music. All software supporting the play/pause button above the keyboard responds to TV by running a + stop + signal (not + pause / play, but + stop +).

  I looked in my control panel (Win 7 Home Premium x 64) for any infrared option, but I have not found anything.

  Then. does anyone know how I could prevent this behavior, without turning off the infrared feature for the NVidea 3D glasses? I don't like for other infrared features, but I need to use the 3D glasses, which are connected by infrared.

  Thanks to words,
  Tenac

  lol: P emp shockwave :D

• software Zune stops when you delete items off zune

  Hello may name is Rodney and I have the 1st generation zune, just the last few days the zune software stops when im trying to remove the items out of the zune, I uninstalled the zune and reinstall with the new software zune, the problem still exists tho, any suggestion on what to do, I have windows xp sp3. Thanks for your help. just to let you know that I welcomed the reports to send to microsoft when this error occurs.

  Zune forums:
  http://answers.Microsoft.com/en-us/Zune

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• Windows firewall stops when a wireless connection is established.

  Windows firewall stops when a wireless connection is established during the start-up or wakup or manually connected via wireless.  The firewall can be activated manually after wireless connection is established.  Firewall survives boot and reactivation if computer connected to the router via ethernet (cable).

  OS is 32-bit Vista Home Premium, SP2.  The platform is Acer A4720Z dual-core Intel laptop.  Wireless adapter is integrated Atheros AR5007EG - Atheros 7.70.396 driver (whidh is current & compatible Microsoft version).

  Current virus/firewall is MSE and MS Firewall.  No firewall problem until the installation of Security Essentials.  Previous virus/firewall was Mcafee SecurityCenter Suite that uninstalled cleanly via the Remove Mcafee (MCPR.exe) utility.

  All the relevant ideas welcome. Thank you.

  Go to network and sharing Center and then choose manage wireless network and try to remove this Wireless if it is there and try to add it again if you want. Try to upgrade Microsoft Security Essentials and also check for update for Windows. Also, run the full system scan and remove potential threats. If the problem has not resolved then contact technical support:

  https://support.microsoftsecurityessentials.com/

• MY VAIO LAPTOP(VGN-CR353) RANDOMLY STOPS AND TAKES MORE TIME TO START. SOMETIMES IT STOP WHEN STARTING

  MY VAIO LAPTOP(VGN-CR353) RANDOMLY STOPS AND TAKES MORE TIME TO START. SOMETIMES IT STOP WHEN STARTING

  It seems that the laptop may be overheating.  Are you sure there is enough air past for laptop?  Make sure that it is on a flat surface, with nothing to obstruct the ventilation openings.  Make sure that the vents and fans and heat sinks are free from dust - examine their blowing with compressed air (power of the system first, of course).  Depending on the laptop model, it may be relatively easy to blow off the dust with compressed air, or otherwise clean up things a bit.   Fans should be kept up well - only no right turn when being ripped off.  My Dell laptop has a removable fan (two small screws need to be removed) that can easily be blown.  This also allows access to the fins of the heatsink.

  Some laptops also have a removable filter that traps the dust and must be regularly inspected and cleaned.

  Are all the BIOS settings for the adjustment of the temperature, the value lower than the manufacturer's recommendations and the default values (you need to check the manual of your laptop for this).  Also make sure you run the latest version of BIOS (again, the manual of your laptop would have the details; the manufacturer's website should also have this information).