Timing NI5640R FPGA component non-diagramme compilation error

Similar Questions

• Help-components throwing compile errors

  Thank you for reading my question. I am using Flash CS3. Recently, all my projects started throwing the standard component AS3 code compilation errors.
  Interface user, FLVPlayback component.
  
  I uninstalled and reinstalled Flash CS3, but in vain. Problem persists
  I keep getting errors involving "QNAN", which is to trap for a nonnumeric value, or something, in my opinion.
  
  As a test, I created a new Flash document, placed an FLVPlayback instance on the stage, pulled a. FLV file in the same directory.
  
  Errors on compilation:
  1093: syntax error.
  1084: syntax error: expecting rightparen before QNAN.
  1093: syntax error.
  1084: syntax error: expecting rightparen before QNAN.
  
  And so on, I get 5 sets of the same errors for different functions.
  The first question above function reads:
  
  function queueCmd (param1:VideoPlayerState, param2:Number, param3:Number = 1. #QNAN): void
  {
  If (param1.cmdQueue is nothing)
  {
  param1.cmdQueue = new Array();
  } / / end if
  param1.cmdQueue.push (new QueuedCommand (null, false, param2, param3));
  return;
  } / / end of function
  
  I get similar errors of my AS3 user interface component as well.
  
  I have not touched AS3 embedded for these components. What gives?
  
  Any ideas?
  
  Thank you
  Tim

  OK, by means of an update: do not trust Adobe to spare.

  I'm sure there is a reason for this, but I discovered that when you uninstall Flash CS3 program installation Adobe removes everything. Everything except the components and a few other odds and ends.

  Long story short, I did the uninstall and then manually trashed components. Reinstalled and everything seems hunky-dory.

  So, no idea why my component code went all wobbly, but a total reinstall did the trick.

  Thanks to everyone for their suggestions. Here I've had hours of back that I wasted assuming that uninstall meant uninstall ;)

  Tim

• LabVIEW FPGA CLIP node compilation error

  Hello NO,.

  I work on an application for my Single-Board RIO (sbRIO-9601) and faced with a compile error when I try to compile my FPGA personality via the ELEMENT node.  I have two .vhd files that I declare in my .xml file and all at this point works great.  I add the IP-level component to my project and then drag it to the VI I created under my FPGA.

  Within the FPGA personality, I essentially have to add some constants on the indicators and entries CLIP to my CLIP out and attempt to save/compile.  With this simple configuration, I met a compilation error (ERROR: MapLib:820 - symbol LUT4... see report filling for details on which signals were cut).  If I go back to my VI and delete indicators on the output (making the output pin of the CLIP connected to nothing), compiles fine.

  I've included screenshots, VHDL and LV project files.  What could be causing an indicator of the output of my VI to force compilation errors?

  Otherwise that it is attached to the output ELEMENT, a successful compilation...

  

  After that the output indicator comes with CLIP, compilation to fail...

  

  NEITHER sbRIO-9601
  LabVIEW 8.6.0
  LabVIEW FPGA
  Windows XP (32-bit, English)
  No conflicting background process (not Google desktop, etc.).

  Usually a "trimming" error gives to think that there are a few missing IP.  Often, a CLIP source file is missing or the path specified in the XML file is incorrect.

  In your case I believe that there is an error in the XML declaration:

  
    1.0
    RandomNumberGenerator
   
      urng_n11213_w36dp_t4_p89.vhd
      fifo2.vhd
   

  This indicates LV FPGA to expect a higher level entity called "RandomNumberGenerator" defined in one of two VHDL files.  However, I couldn't see this entity in one of two files.  If urng_n11213_w36dp_t4_p89 is the top-level entity, edit the XML to instead set the HDLName tag as follows:

  urng_n11213_w36dp_t4_p89

  Also - in your XML, you set the 'oBits' music VIDEO for output as a U32, however the VHDL port is defined as a vector of bits 89:

  oBits: out std_logic_vector (89-1 downto 0)

  These definitions must match and the maximum size of the vector CLIP IO is 32, so you have to break your oBits in three exits U32 output.  I have added the ports and changed your logic of assignment as follows:

  oBits1(31 downto 0)<= srcs(31="" downto="">
  oBits2(31 downto 0)<= srcs(63="" downto="">
  oBits3(31 downto 0)<= "0000000"="" &="" srcs(88="" downto="">

  Both of these changes resulted in a successful compilation.

  Note: The only compiler errors when you add the flag because otherwise your CUTTING code is optimized design.  If the IP is instantiated in a design, but nothing is connected to its output, it consumes all logic?  Most of the time the FPGA compiler is smart enough to get it out.

• DMA FIFO of FPGA compilation error

  Hello

  I have a cRIO 9074 with FPGA. I tried a simple piece of code to learn how to acquire the data that is generated on the FPGA at a rate of 10 KHz and transfer it to the host VI to treat later in offline mode. However, I meet this compilation error when you compile the FPGA VI base containing a node to write FIFO (photo of the VI attached below). In compiling the report, it is said that there are 256 RAM Block used (the total number is 40), so an error has occurred. The error notification of exact compilation from Xilinx report is reproduced below:

  # From the PAM program

  # o toplevel_gen_map.ncd - intstyle xflow-calendar toplevel_gen.ngd map

  toplevel_gen. FCP

  #----------------------------------------------#

  "Target part using" 3s2000fg456-4 ".

  Design of mapping in the lut...

  Guided running of packaging...

  Running based on the delay of packaging of LUT...

  ERRORack:2310 - type compositions "RAMB16" too found to adapt to this device.

  ERROR: card: 115 - the design is too large to fit the device.  Please consult the Design summary section to see what resource requirements for your design exceeds the resources available in the device. Note that the number of slices don't notice it that their packaging could not be completed accurately.

  NOTE: A file NCD will be always generated to allow you to examine the mapped design.  This file is intended for evaluation use only and will not be processed successfully by means of BY.

  Mapping performed.

  See the report of map file "toplevel_gen_map.mrp" for more details.

  Problem encountered during the packaging phase.

  Summary of design

  --------------

  Error number: 2

  Number of warnings: 125

  ERROR: Xflow - card program returned the error 2 code. Aborting the workflow execution...

  Bitstream not created

  Time history analysis

  What does that mean? How can I fix this error?

  Thank you

  Bogdan

  Hey,.

  Have you already tried to reduce the size of the FIFO memory?

  Christian

• Xilinx Compilation error: Formal HDLCompiler:432 &lt; eiosignal &gt; has no real or default value

  Hello

  I've compiled several programs for sbRIOs previously but did not run in before compile errors. I can't find any support to see what is actually wrong. Any help with this would be appreciated!

  The summary of the situation of the Compilation is:

  LabVIEW FPGA: Compilation failed due to an error of xilinx.

  Details:
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 87: Formal has no real or default value.
  INFO: TclTasksC:1850 - enforcement process: synthesize - XST is made.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000032_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 106: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000033_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 125: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000034_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd", Line 144: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000035_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 163: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000036_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 182: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000037_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd", line 201: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000038_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" at line 220: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000039_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 50: Unit ignored due to previous errors.
  File VHDL C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd ignored errors

  -->

  Total memory use is 189944 kilobytes

  Number of errors: 9 (0 filtered)
  Number of warnings: 4 (filtered 0)
  Number of news: 0 (0 filtered)

  "Synthesize - XST" process failed

  I had similar errors (not real or by default) then compile using the code LV would not remove, but the compiler Xilinx would be due to determine it was unused.  It is usually inaccessible code with a register read in the main loop, but write it to enroll in a deal structure that would not be executed.  Differences in the ability of the LV compiler or compiler of Xilinx to decide what is safe to delete this could lead.

  Other times we had errors when a clock has been specified in the file of constraints, but the clock was not used.

  Maybe one of these two seemingly unrelated points might help.

  Shane.

• CityInfo compiler error

  I'm a newbe working through the samples in the development of BlackBerry device applications getting started guide. I can't CityInfo.java to compile any help? compiler error is in blue commented above the code that causes the error in red

  Thank you

  Jack

  /**

  * CityInfo.java

  * Copyright (C) 2001-2008 research In Motion Limited. All rights reserved.

  */

  Net.rim.device.api.ui import. *;

  Import net.rim.device.api.ui.UiApplication;

  Net.rim.device.api.ui.component import. *;

  Net.rim.device.api.ui.container import. *;

  SerializableAttribute public class CityInfo extends UiApplication {}

  Public Shared Sub main (String [] args) {}

  CityInfo app = new CityInfo();

  app.enterEventDispatcher ();

  }

  public CityInfo() {}

  pushScreen (new CityInfoScreen());

  }

  }

  final CityInfoScreen class extends form {}

  Private InfoScreen _infoScreen;

  Private ObjectChoiceField choiceField;

  private int select;

  public CityInfoScreen() {}

  Super();

  LabelField title = new LabelField ("City Information Kiosk",

  LabelField.ELLIPSIS | LabelField.USE_ALL_WIDTH);

  setTitle (title);

  Add (new RichTextField ("US cities"));

  Choice of String() = {'Los Angeles', "Chicago," "New York"};

  choiceField = new ObjectChoiceField ("select a city", choice).

  Add (choiceField);

  }

  public boolean onClose() {}

  Dialog.Alert ("Goodbye!");

  System.Exit (0);

  Returns true;

  }

  _viewItem private MenuItem = new MenuItem ("other info", 110, 10) {}

  public void run() {}

  Select = choiceField.getSelectedIndex ();

  _infoScreen = new InfoScreen();

  C:\Users\Jack\Documents\NetBeansProjects\MobileApplication3\src\CityInfo.Java:67: cannot find symbol

  symbol: variable getUiApplication

  location: net.rim.device.api.ui.UiApplication of the class

  UiApplication.getUiApplication.pushScreen (_infoScreen);

  1 error

  UiApplication.getUiApplication.pushScreen (_infoScreen);

  }

  };

  private MenuItem _closeItem = new MenuItem {("close", 200000, 10)

  public void run() {}

  onClose();

  }

  };

  protected void makeMenu (menu Menu, for example int) {}

  menu. Add (_viewItem);

  menu. Add (_closeItem);

  }

  private class InfoScreen extends form {}

  public InfoScreen() {}

  Super();

  LabelField lf = new LabelField();

  BasicEditField popField = new BasicEditField ("Population:", null, 20, Field.READONLY);

  BasicEditField stateField = new BasicEditField ("status:", null, 20, Field.READONLY);

  BasicEditField sightsField = new BasicEditField ("sites:", null, 50, Field.READONLY);

  Add (LF);

  Add (new SeparatorField());

  Add (popField);

  Add (stateField);

  Add (sightsField);

  If (select == 0) {}

  lf.setText ("Los Angeles");

  popField.setText ("3,694,820");

  stateField.setText ("California");

  sightsField.setText ("Hollywood");

  } ElseIf (select == 1) {}

  lf.setText ("Chicago");

  popField.setText ("2,896,016");

  stateField.setText ("Illinois");

  sightsField.setText ("Blues Clubs");

  } ElseIf (select == 2) {}

  lf.setText ("New York");

  popField.setText ("8,008,278");

  stateField.setText ("New York");

  sightsField.setText ("Broadway");

  }

  }

  }

  }

  This line:

  UiApplication.getUiApplication.pushScreen)

  must be:

  UiApplication.getUiApplication () .pushScreen)

• Dialogue/notification of a jscript compilation error box appears to turn on my computer.

  Hey,.

  I use a new sony vaio f15218, with win8-64 bit. For these past few days, whenever I go into the office, I'm 2 windows pop up as follows:

  Windows Script Host

  script-c:\Users\vikram\AppData\Roaming\Microsoft\windows\startMenu\programs\startup\2f.s
  Line: 1
  Char: 8909
  error: the non-terminated string constant
  Code: 800A03F7
  Source: Microsoft Jscript compilation error

  Windows Script Host

  script-c:\users\vikram\AppData\Roaming\6d\7b527.js
  Line: 1
  Char: 8909
  error: the non-terminated string constant
  Code: 800A03F7
  Source: Microsoft Jscript compilation error

  Something you installed creates a startup item

  Delete this file and you'll be fine: C:\Users\vikram\AppData\Roaming\Microsoft\windows\startMenu\programs\startup\2f.s
  Folder AppData is hidden
  If you press Windows + R and press enter type %appdata%\microsoft\windows\sendto it will take you to AppData\Roaming

• URLRequest (?) compiler error IOS

  I noticed a mistake that occurs only after I exported in my iPhone for additional tests.

  I have a function on my App that tests if the user has access to the internet so that they can use additional features (log in, scores, updates, etc.). Please note that theerror that it does NOT occur if I run the application as a .swf. The .swf works fine. Before ask you, yes my phone is currently online. In fact, a previous version of my application, I did in Flash can connect to the internet, but my recently 'upgraded to Animate"version cannot. Same code. I use the latest available SDK (22.0.0.153)

  Here is the code because I know someone will ask. I am sure that it is a kind of question when the .swf is converted into a .ipa, so I doubt anyone can help me other than the folk of Adobe... which I hope to see this and to provide assistance, so I can get out an update. I've been using this code example for these past two years with great success, but now all of a sudden it doesn't work.

  function onlinechecker() {}

  var onlineloader:URLLoader = new URLLoader;

  onlineloader.dataFormat = pouvez;

  var onlinetest:URLRequest = new URLRequest ("http://www.smileycrewproductions.com/scparacde/scripts/arcade-onlinetest.php");

  onlineloader. Load (onlinetest);

  function runonlinetest(event:Event) {}

  online = event.target.data.online;

  checkadmeasure()}

  onlineloader.addEventListener (Event.COMPLETE, runonlinetest);

  }

  It is not easy to give an answer when given of misleading information.  for example, or code snippets that you have posted will compile even under any version of air.  It is likely that you have failed some of your code and making it more difficult to debug.

  It is even doubtful that your title is correct as (far as I know) there is no 'new' compiler error in SDK sdk 22 vs 17.  so, if you really have the varialbe "online" typed in the scope of your code posted somewhere, there will be no compiler error in 17 and none in the 22 sdk sdk.

  who says:

  (1) to install previous versions of app: just after the point 1/2 towards the bottom of the page is a portal showing how to install previous versions, https://helpx.adobe.com/creative-cloud/help/download-install-app.html

  (2) for other SDK, find and download archived Adobe AIR SDK versions

  (3) once fix you the problems and see no compiler error (if you don't really see everything), you will probably meet most of your problem: a failure of your application to work when it is installed because of updated air for safety (from the air 20) ios app that you can resolve by updating your app descriptor by adding :

  NSAppTransportSecurity

  NSExceptionDomains

  smileycrewproductions.com

  NSIncludesSubdomains

  NSTemporaryExceptionAllowsInsecureHTTPLoads

  NSTemporaryExceptionMinimumTLSVersion

  TLSv1.1

  ]]>

• "Compile error. Unknown error. "or"Multiplexing gone bad"

  Hello people,

  When I try to export my video to 4 minutes (just a simple video in 1080 p: some only clips with a soundtrack, a few titles and, despite a sometimes stabilizer no effect), a "compilation error. Unknown error "or a"multiplexing has failed-error"occurs. For me, it seems that the program chooses just one of two errors, so there will be no export my file... I can't find a reason for these errors.

  I don't know how to get rid of the error division multiplexing (only export the video or audio), but as soon as I get rid of this error, the compilation error occurs, and I don't know how to get rid of that one... I advised Adobe page on the compile error, but none of the advice they gave worked for me...

  I decided to restart the editing of the video. This time that I exported every time after I was 30-second edition. It worked twice (so that total I 1 minute exported), but the third time the error reappears. I removed the third 30 seconds I edited (so I had left only 1 minute again), and I've tried if the first 30 sec still wanted to export. But this time, guess what, errors have come to the top and it wouldn't export... PE will not export the exact same files as it has exported before more!

  I think, something is wrong in the program itself, but tproblem could my computer als. Sometimes while editing a "Premiere Elements has stopped working - popup" appears and then I have no choice but to close the program (what is a sign of a bad work computer?). And tproblem that it could even be forced by me, something wrong...

  
  

  Anyone know anything about these errors and how to heal?

  
  

  Looking forward to your reply!

  
  

  By the way: English is not my mother tongue, so don't go and hate on my English please!
  

  02010 m

  Your English is very good. But we need more details. We understand the problem you have described.

  1. what version of Premiere Elements and on what operating system works - it?

  2. What are the properties including the extension of what you put on your project timeline?

  What have you (manually) or project (automatically) defined as a project preset to match the properties of your media source on the Timeline?

  3. What is your intended export - version 13/13.1 if, Publish + share/computer/and then what? And what you define as the pre-selection for export? You use the default settings of the selected preset, or customize the selected have been preset on his tab multiplexer tab button and advanced video, Audio tab? What are your settings tab multiplexer?

  4. have you developed the timeline to help - + cursor above the timeline and looked for irregularities in all tracks (used or others that you feel is not used).

  a. gaps in the timeline summary

  b. debris (remains) scattered around the content of the tracks

  placement of c. of video and/or audio transitions, titles

  I guess there is no marker menu timeline or movie Menus involved in all this. I guess correctly?

  Before we get to the point where we suggest program uninstall / free ccleaner Cross (parts regular and register), reinstall it with antivirus and firewall disabled, let us

  a. make sure that the structure of the timeline has no flaws inside

  b. determine if delete the parameter of the item first (Adobe Premiere elements Prefs) editor has an impact on one of the problems you described

  If Windows 7, 8 or 8.1 64-bit

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  First Elements

  Version number

  and in the version number the Adobe Premiere elements Prefs file folder that you delete... If that does not work, delete the record of the number of full version in which Adobe Premiere elements Prefs file exists. Be sure to work with folder Option show hidden files, folders and drives on.

  Please review and consider, and then we can try to put all the information together to find a solution consistent with the problems.

  Thank you.

  RTA

• Compile error: sys.v$ sess_time_model table or view does not exist

  If I create the following procedure with DB link to lnk database (Oracle 10.2.0.4, Solaris)
  
  

  create or replace procedure xxx
  is
       tmp number;
  begin
       select     max(value)
       into     tmp
       from     sys.v$sess_time_model@lnk
       where     stat_name = 'DB CPU';
  end;
  /

  the procedure compiles without error, and I can call the procedure.
  
  
  If I connect to the system 'lnk' with DB link user name, I can't create the procedure directly in the database:
  

  SQL> create or replace procedure xxx
    2  is
    3   tmp number;
    4  begin
    5   select max(value)
    6   into tmp
    7   from sys.v_$sess_time_model
    8   where stat_name = 'DB CPU';
    9  end;
   10  /
  
  warning: procedure created with compilation errors.
  
  SQL> 
  SQL> show err
  Fehler bei PROCEDURE XXX:
  
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  5/2      PL/SQL: SQL Statement ignored
  7/11     PL/SQL: ORA-00942: table or view does not exist
  
  The same error comes up if I change line 7 to
    7   from v_$sess_time_model
    7   from v$sess_time_model
    7   from sys.v$sess_time_model
    
    
    
  SQL> select count(*) from sys.v_$sess_time_model;
  
    COUNT(*)
  ----------
         418  

  Why can't I just create the procedure in the database target?

  It seems that you grant of role based on sys.v_$ sess_time_model. You can check it using 'The VALUE NONE ROLE' and then try to choose.
  The direct grant of privilege is required for Pl/SQL. For an illustration more Re: compile errors

• Compile errors display problems

  I connect to an Oracle database version: 10.2.0.3.0 64bits
  Developer SQL version: 1.5.1
  SQL * Plus the version command line: 10.2.0.4.0 with driver ojdbc14.jar is
  
  When I compile in the command line, I see errors:

  SQL> alter package MY_SCHEMA.MY_COMPANY_PACKAGE compile body;
  
  Warning: Package Body altered with compilation errors.
  
  Elapsed: 00:00:00.76
  SQL> show error;
  Errors for PACKAGE BODY MY_SCHEMA.MY_COMPANY_PACKAGE:
  
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  1951/5   PL/SQL: SQL Statement ignored
  1955/27  PLS-00201: identifier 'T_SETUP_COMPLETE_DATE' must be declared
  1956/5   PL/SQL: ORA-00904: : invalid identifier
  2005/5   PL/SQL: SQL Statement ignored
  2013/52  PL/SQL: ORA-00984: column not allowed here
  2050/5   PL/SQL: SQL Statement ignored
  2052/27  PLS-00201: identifier 'T_DEFINITION_ISSUED_DATE' must be declared
  2053/5   PL/SQL: ORA-00904: : invalid identifier
  2078/5   PL/SQL: SQL Statement ignored
  2082/71  PL/SQL: ORA-00984: column not allowed here
  2265/9   PL/SQL: SQL Statement ignored
  2267/30  PLS-00201: identifier 'T_PARM_DESC' must be declared
  2268/9   PL/SQL: ORA-00904: : invalid identifier
  2306/13  PL/SQL: SQL Statement ignored
  2310/58  PL/SQL: ORA-00984: column not allowed here
  5132/9   PL/SQL: Statement ignored
  5132/39  PLS-00201: identifier 'ROOT' must be declared
  5152/9   PL/SQL: SQL Statement ignored
  5152/21  PL/SQL: ORA-00942: table or view does not exist
  5167/21  PL/SQL: ORA-00942: table or view does not exist

  However, in SQL Developer, I use the same database/login. View of connection, I drill down to the package, then the body, then modify and compile.
  All I see on the tab "Messages Messages - journal," is:

  MY_COMPANY_PACKAGE Body Compiled (with warnings)

  "Compiler Log - compile" tab displays a list of warnings, but none of the mistakes that I see in the command line. What bothers me more, is that my colleagues who use the same version of SQL Developer, connecting to the same database with the same login ID can see errors in the user interface.
  
  I would like to point out, when I connect first , I see a small red cross on the package body, but she disappears almost immediately once I do something like by clicking on "Edit" or "compile".

  The option settings of the default compiler in SQLDeveloper include a lot of warnings and there is a data limit of 20 messages, so if you have a lot of warnings, errors are not displayed. The default value in the database (and so in sql * more) does include not all warnings.

  To change the compiler options in SQLDeveloper, go to tools | Preferences | The database PL/SQL compiler options. There are various options for what type of messages to display. You can assign performance to turn OFF and the other ERROR for example.

  The red x indicates that the procedure is not valid.

• LV 2011 (and 2012 LV) compilation error. Size not valid in _InstSize: 21

  I created a Subvi in LV8.5 to manage events UI outside a main vi. The Subvi gets control references who are registered for the events, through a queue that all actions are sent to a consumer case, nothing complicated. Everything works fine in LV8.5, but now I got all LV2011SP1 on a Windows 7 64 bit and I still get the same error:

  "Compile error. Report this issue to National Instruments Tech Support. Invalid size in _InstSize 21 "

  which appears 3 times. I tried to open the same code also in LV2012, same error... When you try to isolate the problem, I discovered that by disabling the code in 3 cases of greater consumption that I can get rid of the warning, but then I can't reduce the problem to one...

  Any ideas?

  Yes, the thing to put 'problem' labview code into a Subvi its own helped me as well.

  My speculation is that it forces the choice of another compiler (without the bug) path when compiling the source of the LV.

  I think you should file a bug report using the pages of http://ni.com/support .

  In this way we will have better tools in the future.

  BR,

  / Roger

• Compiler error. Report to Technical Support OR: err c = 0xF1 ufppushop

  Compiler error. Report to Technical Support OR: err c = 0xF1 ufppushop

  When recording / runing a vi that performs calculations in a node formula containing several if and a switch statement. (LV6.1, WinNT)

  I solved the problem: the compile error occurred because a single formula node entry was an enum.
  When you insert a cast to digital, the problem has been resolved.

• Outside regs, reg 1239 compiler error

  I installed LV2009 and trying to open the version 8.6 vi.

  I get a message "compilation error. Report this problrm to Technical Support from National Instruments. off-regs - no release candidate has found, reg 1239! »

  32-bit client of Labview on Win 7 64 bit and Win Server 2008 64 bit give the same error.

  The attached code.

  Technical support NOR suggested installation LV 2009 service pack 1, which fixed the problem.

• const compilation error

  Hello

  If I declare a const, which is based on a value previously declared const I get a compilation error:

  const int MY_INT_CONST1 = 10;  no error.
  const int MY_INT_CONST2 = MY_INT_CONST1 + 10; compile error: initializer must be constant

  I tried to search the Internet to see if this goes against ANSI-C, but did not find the relevant answer.

  Anyone who knows and who have a source of information?

  Thank you!

  dml72

  Hello

  As I remember, in ansi C, global variables must be initialized by constants.
  So, we can write:
  # define MYVAR 5
  int a = MYVAR;
  because the preprocessor replace MYVAR by 5 before compiling the sources.

  But if we write
  const int a = 1;
  const int b = a;

  We want to initialize b with the value of a, which is a global variable and the compiler should detect an error (declare a constant variable will generate a compiler error if the variable is reassigned to the program, but is still a variableand not a constant).

  The same compilation error should appear if write us in the global section

  int a = 1;

  int b = a;

  int c = myFunc ();

  However in the locals, initialiseur initializer is not necessary to be consistent, so we can write

  void myFunc (void) {}
  const a = 1;
  const b = a;
  c const = myfunction2 ();
  ...
  }

  In summary, the keyword "const" is not the reason for this error, you can add or remove this keyword, the error will always be the same.

  It is simply impossible to initialize a global variable with another variable as global variables are initialized before executing any statement.

  Concerning

  Etienne