titles of audio book in media center

Similar Questions

• How can you tranasfer the titles of audio book on a portable device?

  I can't transfer my cd audio book onto my MP3 player.  After that I used the DTS software to convert each disc to allow the transfer of the device, I get an error message saying that the track is already on the device and I want to replace or skip it and continue with the transfer.  However, if I select one of these options, I lose the contents of disk 1.  In other words, if drive 1 has 10 tracks (named track 1, track 2, etc.) and disc 2 has also 10 titles, the same, I can only transfer the contents of one drive at a time.  Is it possible to transfer more than one cd at the time?

  I tried long time back and I got a CD player built into my laptop and a USB CD drive. It worked as I created 2 folders on the desktop and copy the contents of two CDs in these files. Subsequently, I've renamed the titles.

• No audio in Vista Media Center Live TV

  In Windows Media Center on Vista, I lost the audio when watching live TV. Others have had this problem, but I have not found a satisfactory answer that solves. Nothing is cut, my speakers to test very well and it IS audio in all aspects of Media Center, including the recorded programs previously. The problem seems to lie in Media Center, itself; I read something on any corrupted files codec, but no indication on how to fix this. Reload Media Center will arrange this and if yes, how can I go about it?

  Sometimes a presence of third-party decoders can cause this problem. If this is the case, uninstall them and check again the question.

  You can try Vista Media Center Decoder Utility: -.

  http://mediacenterexpert.blogspot.com/2006/07/Vista-Media-Center-decoder-utility.html

• Audio in Windows Media Center

  View Windows Media Center, click on music, get a banner "Audio error has occurred." Cannot use music.

  View Windows Media Center, click on music, get a banner "Audio error has occurred." Cannot use music.

  Y at - it audio? or you get the error message?

  Suggestions: -.

  Audio problems in Windows Media Center

  Run the Setup again.
  Open WMC > tasks > settings > General > Windows Media Center Setup > run the Setup again.

  Also update the audio driver.

• No sound in media center

  It happened recently.  I am getting sound in WMP and QuickTime player but not Windows Media Center.  It will not read video files or live tv.  He plays good music.  I tried to configure the speakers, but that did not work. Anyone knows what is the cause?

  Hello
   
   
  1. what type of video files you play?
  2. what happens when you try to play on TV?
   
  Here are solutions to some common problems with audio in Windows Media Center.
  Audio problems in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• lost sound for a channel of tv media Center in vista

  Hello world
  Have had my cable is split into a TV and my computer.  My computer using Vista and is updated.  This Setup has worked well over the years.  A few weeks ago a tv in media center channel lost his.  All other channels are fine.  My TV has sound for all channels.  I replaced the splitter and still the same problem.  I think media center units must be reloaded in my computer.  This problem can be corrected by removing and reloaded in my computer?  Or is there another place I have difficulty?
  Thank you

  Hi 01starsky,

  Cause of this problem

  This problem occurs because the Media Center always tries to play an (Arc consistency #3 algorithm) AC3 (Dolby Digital 5.1) audio stream that is present in a show. The AC3 audio stream offers the best quality audio experience. Some stations broadcast the required primary stereo stream and the AC3 audio stream option. If Media Center detects that an AC3 stream is available in the broadcast, Media Center selects that available stream. Some broadcasters may broadcast empty or muted AC3 stream. So, if a broadcast contains an AC3 stream, but no audio is present, Media Center has no sound for that specific channel.

  Currently, Windows Vista doesn't have an option to force Media Center to use the main audio stream when a muted AC3 stream is present. However, you can contact the broadcaster and report the muted AC3 stream.

  Reference:

  When you use Media Center to watch live TV on a Windows Vista-based computer, you can't always hear the sound

  http://support.Microsoft.com/kb/929515

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to open any program or file the only thing that opens is Windows Media Center

  * Original title: only the open Windows Media Center

  Every time I try to open a program or file, the only thing that opens is windows media cente.ive had set up a new account just to be able to use my lappie, I have no point of restord

  Hello

  You can check out the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Try running the fixit and see if it helps:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Hope this helps,

• All the desktop shortcut icons have changed for Windows Media Center

  so I aidentally tried to open an EXE file. file with windows media center and wmc has taken over my computer. converted almost all my shortcut icons on the desktop in wmc and wmc fefuses icons to close. System Restore does not either. safe mode was not helpful either

  Original title: hostile takeover in Windows media center

  Thanks for your quick response. Unfortunately, the process you gave me failed, because he said that I had no permission to check in the Notepad file. BUT he has given me hope and showed me in the right direction. I had worked at this for 4 days now. I learned a lot through the links you sent me and I could finally get it fixed.

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• After clean install of Windows 7, Netflix and Internet TV plugin does not work on Windows Media Center.

  Original title: problem with Windows 7 Media center

  Is there anyway that I can replace the whole C:\Windows\ehome? There is a permissions issue, and I can't find a way to change the permissions...

  The only reason I want to do is I did a clean install of windows 7 and the plugin TV Pluzz.fr and the internet do not work on this computer and it seems to be no work around. But I have a PC where WMC works fine and I can replace the entire record of WMC and it should work like the other PC (I think).

  I could do if I ran linux or something, but I'm looking for something simple or a fix to this problem with WMC.

  Hello

  Thanks for the reply.

  It is too bad to know the steps in my previous post did not help to solve the problem.

  I would like to inform you that starting from September 20, 2012, the experience of Internet TV is no longer available. You can consult the following Microsoft article that has the same information:

  Cannot open Internet TV in Windows Media Center

  http://support.Microsoft.com/kb/2801382/en-us

  For problems with Netflix, I suggest you follow the steps in the Microsoft article and check following:

  http://support.Microsoft.com/kb/972496/en-us

  Also applies to Windows 7.

  Please answer us on the State of the question to help you further.

• Why has Windows Media Center - no sound?

  Dell Bangalore technicians installed Windows 7 Home Premium on this PC Dell XPS 420 on May 21, 2012.   I have given them access to this computer and find that I "inherited" all the bits and pieces - which I didn't ask!   Thousands of TIFF and others.   Press room and Media Player have no sound.  In fact, it NEVER worked properly.   Y at - it someone who can put this right?

  04/04/2013 I extended my McAfee Security for a year and finally got the SRS sound program that I bought in January 2013, but there is no noise to prove that it is effective.   P {rental can help you?

  Hi Elva,

  There seems to be a problem with the audio in Windows Media Center.

  Perform the steps from the link below and see if it helps.

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center

  Note: This also applies to Windows 7

  Hope this information helps.

• I get random stops with my recordings on Widows Media Center.

  Original title: Smart TV with Windows Media Center Recordings interference

  Since the installation of a new Samsung Smart TV (model UN46ES8000F) I have been making random stops with my recordings on WMC.  Because there are a lot of tuners and available memory at the time where the records are arrested, they record not 'conflicts' in the sense of the WMC.  Records are simply stopped manually at random times when recording provided by another component on my computer in the home network. Today, I tried to reload WMC, a full charge of Windows 7, complete diagnosis on all equipment running & exchanging a few components; But starting today, I was not able to specifically identify the component that prevents the records, however, I begin to suspect the smart terminal on the new TV.  I have photos available of history showing the partial records should anyone want to consult them.

  Description of the system: I use wired (Cat5E) Linksys DMA 2000 ex distribution TV recorded on my first HDHomeRun in 4 different rooms in my house since my computer Dell XPS420 (under Windows 7 Ultimate) via a D-link DGS-2205 gigabit switch.  The Smart TV is connected to the internet via my router D-link DIR - 655 Wireless-N.

  Everyone knows about this problem, and no one knows a way to solve it?  Do not hesitate to contact me directly at * address email is removed from the privacy *.

  I too began to see problems with my Windows 7 Media Center after buying a "smart tv".

  I am using an HDHomerun Prime with 2 pc for more than a year and practically no problem.  Now, I use it with a Ceton Extender so... no problem.  But when I got my first smart (a 55 '' TV LG LED 120 MHz) model, the problems started.

  Whenver my new flat screen is connected to my network (cat6, 1000Mbps), I noticed a ton of problems with my 3 tuners.  All three tuners "disappear" and whatever program I was watching would freeze.

  I didn't record something while my smart tv is connected to my network, so I can't say I have the same problem you are having, but I sincerely believe that we are the same.  For the sake of arguments, if I recorded something, it probably would have stopped.

  I agree with you 100%.  I think the smart TV is guilty.  I think the problem is our TV are the first hdhomerun and treat it as one product DLNA.  Under my smart TV App menu, I can see the shared folders on various pc's on my network (music, videos, etc.). .. as well as three files for each tuner hdhomerun main!  When I click on one of the tuner, my TV resets icon.  Something tells me that when the smart tv is connected to my home network, he's trying somehow communicate with three tuners and which is originally the tuners to freeze.

  If Silicondust would somehow a patch update or firmware to avoid the first appearing as a product DLNA, which can solve our problems.

  I think that Silicondust would be able to help you with this problem.  I doubt that microsoft technicians will have a clue.

  The silicondust techies will be most useful, especially since they want to certify our hdhomerun first tuners like DLNA Certified products as we speak.   If you do a search on the web for first hdhomerun and DLNA, you will see an article/news update on progress.

• I get a black screen when I play videos in Windows Media Player and Windows Media Center.

  Until recently, all worked well for a long time. Now when you try to watch live TV or a DVD, I get a black screen with sound in Windows Media Center and trying to watch a DVD in Windows Media Player I also get a black screen with sound. The controls are there and functioning normally. DVDs are normally visible in the K-Lite Media Player Classic.

  I have Windows 7 Ultimate 64-bit, a tuner TV of SiliconDust HD Homerun networked and a videocard ATI Radeon 4550. I have all the latest updates.

  I found and tried many recommendations of the Internet for problems like this, and none helped.

  The video card driver is the latest provided by ATI to Microsoft for Windows Update and is dated from 19/04/2011. I tried to install the latest Catalyst software and driver from the ATI site, which does nothing to help, and then uninstalled. These drivers provide no option to adjust the hardware acceleration.

  I had an older version of K-Lite codec package installed. The problem does not change if I have the old version, the last 32 + 64 bit version or no version installed.

  In Control Panel, I tried to disable Windows 7 media, reset their reactivation components and reboot again. There is nothing.

  I had an older version of installed package from Cyberlink. The problem remains the same if I have the old version, the version the most recent or any installed.

  I tried to uninstall all Apple software: QuickTime, iTunes, etc. There is nothing to help.

  I tried to create a new user account; same problem there.

  I have VMware and a virtual machine that is running 64-bit Windows 7 Professional. In this machine, I can view DVD normally with Windows Media Player, using the same physical DVD drive. I don't have Media Center set up in this machine.

  Title photo: original No. in Media Center and Media Player

  The problem is now resolved. I removed the software installed probably because the problem started, and Cisco Webex, which I did not need, was probably the culprit, although I'm not 100% sure.

  Thanks to those who have tried to help.

• Cannot upgrade to Windows Pro 8.1 with Media Center

  Original title: upgrading Windows * Pro with Media Center

  I can't find any update for Window Pro 8 with Media Center for Windows 8.1 or 8.1 of Windows Media Center. It is said that it is not compatible with the version of windows you are using. Can anyone help?

  Thanks in advance. ;)

  Hello Muhammad,

  Thank you for your valuable response.

  As a result of your message, we noticed that Dell OptiPlex GX520 is not compatible with Windows 8.1 and there is no available driver, this is maybe the reason why you can not upgrade to Windows Pro 8.1 with Media Center. We invite you to contact the manufacturer of the computer and check if it is possible to upgrade to Windows Pro 8.1 with Media Center on this computer. For more information on Dell OptiPlex GX520 you can refer to link below and kindly click Change OS see the compatible operating system on Dell OptiPlex GX520

  http://www.Dell.com/support/home/us/en/19/product-support/product/OptiPlex-GX520/drivers

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• Windows Media Center-how change the titles of audio tracks

  Edit titles when burning a CD with the media library.

  Is it possible to edit tracks I want to burn it to a CD with Windows Media Center?  Trying to get rid of long intro and outro, then I can fit more information on the disk.

  Not with Media Center, you need an app for that, likeAudacity (free) for audio editing special.
  Tim Baets
  http://www.BM-productions.TK