TiWorker 50% of CPU and the update does not work somehow

Similar Questions

• Internet and the sound does not work after uninstalling programs, System Restore also not work.

  I noticed that my computer felt a bit slow so I uninstalled a few programs that I knew were not very helpful so I restarted my laptop, and then the network and the sound does not work.

  I tried to use the system restore, but that does not work either and I tried to online solutions, but nothing works.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Satellite W30T-A378 from - touch pad and the keyboard does not work

  I have a problem with my laptop, the touch pad and the keyboard does not work.
  Can someone help me what is the possible cause?

  Thanks in advance.

  Hello

  I guess you checked if the Tablet has been properly connected to the docking keyboard.

  Have you tried to unplug and plug the docking again?
  Note: there is a latch on the left you have to move and in order to remove the tablet.

  Perhaps there is a connection problem.

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  Copy the contents of the cd in a desktop directory.  install from this directory.

  or

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6,7. 5.7.1|  4.4 | 3.6
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• using firefox 24, yahoo toolbar disappears and the keyboard does not work on some websites

  We have installed firefox 24, yahoo toolbar sometimes disappears. On some web site when trying to enter a password, the keyboard does not work until you double click of the mouse on the registration form. This on two different systems of windows 7. Each thin seemed to work fine before the update prior to the installation of 24.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  I hope this helps!

  Curtis

• DirectX, d3d9.ll & d3d10.dll and Windows Update does not work... (Same problem?)

  I had some problems with my computer lately...

  The first thing I noticed is that I failed to run games and applications and I got this weird error 'missing d3d9.dll' and something in style with... "it could be fixed if you have reinstalled the application," but it didn't and I kept getting the error, then I went to see if there was even a d3d9.dll or a d3d10.dll - but it was not...

  Then. I tried to download em for the internet, but later, I noticed that they were for DirectX and therefor was not sure I had good... Then I went to update my DirectX - but failed. He says that I already had an update of DirectX version and it refused to install. I however, perhaps I could uninstall directX, but I couldn't find where and how...

  Then I however, maybe it's because some weird windows update problems - so I went to check how many updates there. I check it the day prior to that, but all of a sudden there are 14 new updates that I had not installed yet (overnight 14 new updates!).

  Does anyone have a solution to this? Please, I desperately need help!

  Hi exique,

  1. don't you make changes before the show?
  2. on what game and application that you get this error?

  DirectX runtime for end-users (also known under the name of DirectX) is an extension for the Microsoft Windows operating system that provides a set of quick material orders, low level that they can use to improve performance for Windows games and multimedia programs. The current generation of Windows games and multimedia programs does not work properly without DirectX. So, by design, you cannot remove DirectX.
  See DirectX: frequently asked questions

  We recommend that you scan sfc (System File Checker) to see if any system file is missing or damaged. To do this, try the following steps on Vista and Windows 7
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  If the problem persists, we recommend that you reinstall the game or program that causes this problem.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satego P100-10F: Windows XP Lan, usb slots and the sound does not work

  Hello

  I have problems with windows vista, so I checked the forum to get information on the windows xp installation.

  I downloaded the drivers windows xp since the P100 Satellite (pspa6e), my only problem is that the LAN, usb slots and my sound does not work.

  I hope someone has a good idea for drivers or to install another driver I have sound and LAN on windows xp.

  Ty and Greetz

  See European driver of Toshiba.
  Here, you can try to install several drivers of different portable Satellite P100.
  Try all series.
  Fact is that some units of the Satellite P100 and Satego P100 series were delivered with the same features.
  Therefore, it should be possible to use the unique drivers of these series.
  Check all.

• Satellite L305D-S5895 - keys to functions and the wifi does not work with Win XP

  Hello

  first sorry for my English

  I bought a Toshiba Satellite l305d s5895, with Windows XP, I need a software, but the function keys does not work.
  So I need a driver, but I can't, and wireless internet does not work.

  > Where could it find special XP BIOS?
  In my opinion, there is problem because most threads here are on the European laptop models. then come to question United States. Toshiba Europe and Toshiba U.S. do not work together and each of them is responsible for own models and provide support for specific country notebooks models.

  For most models, so here in Europe Toshiba has offered two BIOS. We were already on the delivered Vista laptops. The Toshiba page download available BIOS for Windows XP Home edition. in most cases, it was version 5. XX and this BIOS was designed to support public services and specific tools of Toshiba. For example, all the FN key features was only available with this BIOS WXP.

  So if any of you have laptop model US they would see how the solution with Toshiba U.S. or US forum under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1

  Bye and good luck!

• Autorun does not work WinXP home. I insert a cd and the autorun does not work.

  I have tried everything I can find on solving this.   When I insert a music cd, it is used to bring up a box that I wanted to use it as a player, etc.   Now it's just sitting there and when I right click on a song to play windows media is not even an option to use.
  I hope it's make sense.  Basically the autorun does not work for anything.
  I've seen references to the registry, but I tried everything.

  Try to use the Autoplay Repair Wizard

• I put a new ink jet cartridge in the printer and the printer does not work although it is switched on

  Cartridge replacement installed on a lexmark 730 printer inkjet series all the cables and connections ok but the printer does not work

  Hello

  as the poblem started when you changed the ink cartridge contact Lexmark

  http://support.Lexmark.com/index?page=home&channel=supportAndDownloads&locale=en&UserLocale=en_AU

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• C1765 done yellow toner a printer roller noise rattling and the printer does not work

  Hear a clicking noise when printing.  Replaced the yellow toner and the rattling is still strong and the printer will not work.  The noise and the vibration felt on the new toner only occurs with the yellow toner.  What is happening, is the printer goes wrong.  "low density, yellow to replace the cartridge, printer restart" I just put in a new cartridge.

  Hello David,.

  Please post on the forum. According to the information you provided, it looks like you have a mechanical failure within the printer itself. This device is more compact and carriers Dell limited parts, the best option at this stage would be to replace the printer. It is the course of action we would take if the product is under warranty.

  Kind regards
  Joseph E

  #iworkfordell

• problem with the mouse and keyboard and windows update does not work

  Since last week to start the computer, I get an error message that the mouse and keyboard functions do not work. He then seeks the errors and then indicates that the service restarts. I want to fix this problem and according to Microsoft hardware, I should download "mkc.msi", which is missing from my computer, but when I do a search for a download, it always automatically directs me to the section "community". How can I correct this problem and get the appropriate download? I use Windows Pro 64 bit with IE 11 on an Acer laptop. I have the Acer site but it was a great help. Also, for the last 6 months, I could not update my computer windows update feature does not work and no error code is presented. I tried everything to restore or re-download the windows update feature, but nothing works, or I can't find a source. I got a blue screen 3 times indicating that windows must be updated and has been the reason for the blue screen. Unfortunately, I don't have a Windows 7 reinstall drive when restarting it spilled about 85 MG of data but not identify what has been dumped. Of course I could use help on this major problem as well even if it cannot be in the category correct community.

  Hello

  I understand that you are having trouble downloading MKC. MSI. I would certainly help you to fix this problem.

  Method 1:

  If you are referring to Microsoft Mouse and keyboard Center, then check out these links to download.

  Download mouse and keyboard Center to get the best out of Windows 8

  Mouse and keyboard Center 2.0 (formerly IntelliPoint and IntelliType Pro)

  Method 2:

  You can consult the following Microsoft article if you are unable to install the updates of Windows on the computer.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• reduce to a minimum and the cross does not work in private browsing

  Since updating my inprivate browsing minimize, maximize and cross does not work. Also, there are not in place at the top of the screen. The only way I can get to another screen moves this software out of my way with the mouse

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.