TMS directory system endpoints source folder

Hello

I came across a rather baffling problem with a few cases of TMS and I can't for the life in me know as to why this is happening.

I get the following.

in the option for creating source directory Cisco TMS, I create a new directory and link with the MSDS files and select the folder where all the end points, this creates the entries in the phone book for me as I expect with one exception, I will detail below.

H.323 = [email protected] / * /

H.323 = [email protected] / * /< this="" is="" where="" the="" issue="">

IP = IP address

I find that on some systems (this doesn't happen to all systems) in the second entry of H.323, the H.323 entry where I expect to see the directory (also known as E.164 number) number I see a URI where a field has been added at the end of the number, I'll give you a few examples below.

DN = 1234

set field = @video.net

random field = @newdomain.com

IP = 10.10.10.1

I expect to see the following.

H323 = [email protected] / * /

H323 = 1234

IP 10.10.10.1

but I don't actually see

H323 = [email protected] / * /

H323 [email protected] / * /

IP 10.10.10.1

I have purged the TMS systems and added, I searched through the xconfig for the NouveauDomaine which is invalid and I can't find anything anywhere other than on the list of areas configured SIP VCS parameters in the second area, endpoints have disabled by default SIP and in both cases I expect to see that under a SIP entry not an H.323 entry

This is the origin of the problem of when a user tries to call via the Directory site remote also responds to busy VCS is unable to find the appropriate directory number because the location request contains the domain as well as the DN.

I worked around this by adding a transform to the VCS who sees the patter of specific numbering and the bands of the area, so the calls work, but I still need to understand as to what is causing this behavior.

If I had to create the directory entries by importing information from the record of the VCS seem to be correct, its only when I try to import the entries of the endpoint via the system folder in TMS (or more exactly to import the information stored in the file on the endpoint system) I see the problem.

a very popular Adviser.

See you soon

Dave

Hello

Picked up that the case with David and it seemed that at least on the systems the international denomination on the mxp MXP has been configured. The area of intellectual property also has a configured domain uri that has caused the other symptoms. We where able to erase the questions but still yet to see if the client is actually affected by the same configuration "mistakes".

/ Magnus

Sent by Cisco Support technique iPhone App

Tags: Cisco Support

Similar Questions

  • Directory of TMS on the endpoints registered CUCM TC

    Since 14.4.0 TMS version, it is possible get endpoint CUCM registered directory server to point to the TMS directory instead of the CUCM directory.

    I tried to set up, but I still can't get it to work.

    On the endpoint of TC (version TC7.1.3), in Configuration > System Configuration > Server from the phonebook,

    I set the server type MSD and the URL as http://TMSserverFQDN/tms/public/external/phonebook/phonebookservice.asmx

    When I SSH to the endpoint TC I ping the TMS serverFQDN so DNS resolution on the endpoint is apparently works.

    When I open this URL in my browser, I get a page called "PhoneBookService" with GetPhonebooks links, ResolveSystem and research

    But on the preview endpoint it works everything simply. This shows just "no directory.

    How can I solve this problem?

    A few quick questions that jump to mind are:

    1. Endpoints defined in TMS?
    2. A TMS directory is published at the endpiont in MSDS?
    3. The directory TMS has a source valid and entered in it?

    Wayne
    --
    Remember the frequency responses and mark your question as answered as appropriate

  • TMS directory failed in the endpoints of series C after the migration of the device to the virtual computer

    Hi all

    We have migrated the 12.8 TMS from the device to the TMS 13.0 on the VM platform. There is no matching TMSPE and mainly used for management and directory service.

    Once the migration is complete on the platform of the VM, we found that endpoint C-series could not receive phonebook of TMS (while 95 MXP endpoints works very well with the TMS directory).

    The end point of series C, we check the Configuration-> directory server 1: URL. The link is converted from http:// /tms/public/external/phonebook/phonebookservice.asmx http:// tms/public/external/phonebook/phonebookservice.asmx.

    (In addition, we check the authorization of the two phone book page, and there is no IIS issue).

    In the 95 MXP endpoint, it can receive the telephone directory unit VM MSD and MSD.

    Best regards

    Ben

    Hi Ben,

    As confirmed by the curl command - you don't have access to the web page as an anonymous user.  You have to fix your permissions.  One of the fastest ways to do would be to try to reinstall the MSDS on the server again - this should reconfigure the IIS settings required for TMS.

    Wayne
    --
    Remember the frequency responses and mark your question as answered as appropriate.

  • Check if the TMS directory is accessible from codec

    Hi all

    I'm starting a new configuration of telepresence. I have problems with directories. Seems that codec are not even trying to search the TMS directory.

    How can I check if the codec is configured to query the directory TMS?

    In "Advanced-> directory server 1 Configuration" ID has the default value, type MSD and URL to http:///tms/public/external/phonebook/phonebookservice.asmx

    When users press the directory key in remote control no shows, only my Contacts.

    Thank you

    Concerning

    Thanks for the update - the question is usually a proxy or a firewall - your endpoints need to have direct access to port 80 on the box of TMS on the subnet, they are on.

    Wayne
    --
    Remember the frequency responses and mark your question as answered as appropriate.

  • Source folder in WEC does not pick up the file

    Hi experts,

    I have WEC of installation environment. In this capture file source is configured. When I put the file in the source folder it will not process the file correctly. In the diagnostic log, it gives below error.

    [2015-10 - 09T 12: 23:54.559 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.odc.importprocessor.ImportJobSchedulerSessionBean] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 712604363a44b5cb:66099704:1504b4ea1db :-8000-0000000000000230,0] [APP: capture] processing file E:\ImagingShare\WEC_input

    [2015-10 - 09T 12: 23:54.559 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.odc.importprocessor.ImportJobSchedulerSessionBean] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 712604363a44b5cb:66099704:1504b4ea1db :-8000-0000000000000230,0] [APP: capture] citing NewFolder event

    [2015-10 - 09T 12: 23:54.621 + 05:30] [capture_server1] [ERROR] [] [oracle.odc.importprocessor.ImportJobSchedulerSessionBean] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 712604363a44b5cb:66099704:1504b4ea1db :-8000-0000000000000230,0] [APP: capture] []

    • oracle.odc.exception.CaptureException

    at oracle.odc.importmanager.ImportManagerSessionBean.createDocument(ImportManagerSessionBean.java:354)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)

    .........

    ]]

    Any idea what goes wrong?

    Kind regards

    Vikrant Korde

    Thank you guys for your contributions.

    The reason why I was not able to access the folder has been due to the issue of access.

    I installed the software with user1 and later in time User1 got disabled so I used user2 to start the Weblogic. It made it difficult to access the folder that the installation was done by user1. I uninstalled components and redo the entire system by user2, and then he started to work very well.

    A lesson learned in Windows computer user who has installed the component is still in use and account should never expire.

    Kind regards

    Vikrant Korde.

  • How to reset the System Volume Information folder?

    I would like to know how to reset the System Volume Information folder to empty all the potential viruses.

    Does anyone have any suggestions?

    Thanks in advance for your suggestions :>

    I use cleanmgr /sagerun:1 of the dialog box run when you use a switch.

    However, I usually just use these instructions.

  • Microsoft Windows Vista: Rebuild the system volume information folder

    Greetings to everyone.

    (1) the Crypto ransomware locker has done the thing is on a friends laptop last week. This is a laptop HP DV900 Microsoft Windows Vista. Unfortunately, we have re-installed Vista, from the recovery partition, before attempting to restore the system, using the system restore. It is my understanding that the system volume information folder, contains files, such as excel and word files, which can be restored, but they are stored by Vista, in a special encrypted way.

    If I could get it back or if I got the complete information system volume, would be possible to replace the current and to restore the system to a time before the ransomware hit?

    (2) in fact, I've used a file recovery program and was able to recover a huge file with the name:

    {11d89a13-09a9-11e4-9917-cb6a370b41f2} {3808876b-c176-4e48-b7ae-04046e6cc752}

    This file is approximately 1.99 GB, and is dated on 17/07/2014. I suspect that the virus deployed on 18/07/2014 as the most important Excel and word files have the date of last modification of 18/07/2014. And those files that have changed on the 18/07/2014 cannot be open - unless I have change the extensions of excel to .csv file, in which case excel files open, but the info is still obviously encrypted.  OK, so I have the part of the system volume information folder content, which seem to be of the part that contains the files there, as this is a fairly large file.

    My question is this: is a reconstruction of the folder system volume information, based on this possible of the file? In other words, using this file I have cancelled/recovered, can we restore Vista from this file?

    Thank you for your time.

    You cannot use the system restore to recover files from the user.  Restore points would be zero because of the new facility.  Update of installation dates would be irrelevant as well as software installations.  The new installation files will take precedence.

  • Loss of disk space available every day as System Volume Information folder is the largest on my hard drive

    My PC is under Windows7 Home Premium... version 6.1... Build 7601... service pack 1.

    I have a 1 TB hard drive... 3 weeks ago, I've had approximately 813 gb free space... now, I have only 603 gb of free space. I noticed that the folder System Volume Information is passed to 209,53 Go. Don't know why this issue became so great. I lost about 5 to 20 GB of free space on the hard disk every day.

    The System Volume Information folder is the largest on my hard drive... Users folder is 43.38 GB... Windows folder is 31.89 GB... WinSxS folder is 15,18 GB.

    I installed a couple of applications in the last 6 months... Driver booster... Download App... and size of file.

    I didn't save my PC in the last 3 weeks because of this problem.

    The only application that I use for backup is MotoCast USB... it creates a backup of the SD card in my smartphone to my PC.  I've been backup card SD in my phone every 3-4 weeks for the past 2 years but never lost so much hard drive space until the last 3 weeks.

    Any suggestions?

    Vido84

    I suggest that you should the Zone Alarm Firewall and use Windows Firewall.

  • Windows 7: what are the individual "file system type" files in the system volume information folder?

    Original title: Windows 7: what are the individual "file system type" files in the folder system volume information accumulating [not the files system restore I already know and don't use yet]

    Hi-

    I stopped using the system restore, I found a better solution, for me, that's what I have to do.
    Then I noticed that several 'file system' 'type' was being created, 12 times yesterday, 3 up to today in the early hours of the morning and stored in they System Volume Information folder, anywhere from 30 MB to 2 GB.
    three of these file names 'file system' 'type' are:
    {debb21da-eafc-11e2-ba92-00241dc5d84e} {3808876b-c176-4e48-b7ae-04046e6cc752}
    {3debe675-eaa7-11e2-a462-00241dc5d84e} {3808876b-c176-4e48-b7ae-04046e6cc752}
    {3debe5e8-eaa7-11e2-a462-00241dc5d84e} {3808876b-c176-4e48-b7ae-04046e6cc752}
    Anyone know what it could be?
    Can I follow up to what program/process they are related?
    Are they safe to delete?
    Ideas?  Suggestions?
    Thank you.
    John

    Hi John,.

    Yes, you can delete the system volume information data if not to use the system restore.

    You will need to give permission to the folder until you delete it.

    How to open a file if I get an access denied message?

    Please post with the State of the question.

  • I keep the system of file/folder in Windows 7... It will change anytime soon (Windows 8)?

    There will be a choice/option to know if yes or no users will want to use the old system XP/Vista-folders/files in Windows 8? You are familiar with the old addage, "DON'T FIX it NOT... IF it IS NOT BROKEN! "The old system had its good and bad points and good high point was its ability to drop and drag... to fairly well set up their own system of folder/file in no time at all for me. Also, I have problems with the system of file/folder skip around in the Navigation pane. When I click on an element of the page jumps to the bottom of the window... pulling everyting from the top down. Work real irratitating. There is a way no possible way to organize the files or photos by drag - move. I was using either digital or the method alphabeticle of the organization... sometimes both and a reference. It takes longer now. A little longer. I could go on and, but you get the general idea. So, I think that a choice for those who are accustomed to the old XP/Vista method and those who must work with the newest Windows 7, would be grateful to have and enjoy the ability to have the choice between the two methods. It would be a great and welcome addition. Those who are accustomed to the folder/file system Windows 7 would not change. And those he wish they had the old system at their disposal would have this choice. Come on Ms... Eliminate the negative and add to the odf positive side of the new Windows 8. You asked for ideas... Well, I'm throwing this one in the ring. "GET EERrrr DONE!", Bye, BPAlaska

    Look at the victory-8,

    http://blogs.msdn.com/b/B8/default.aspx?PageIndex=1

  • "$recycle.bin & system Volume Information" folder & windows Defender

    Hi, I have recently buy the 8 portable windows, because after 8 windows updates installation "$recycle.bin & System Volume Information" folder are created, I think than a virus files, due to I am unable to delete the files in my system, the folders are created in all of my hard drives. I want to hide this folder into the laptop. How can I do that, I want to know about windows defender is a work in my system are not how to check it in my laptop.

    Thank you & best regards

    Alain Rolland

    Hi, I have recently buy the 8 portable windows, because after 8 windows updates installation "$recycle.bin & System Volume Information" folder are created, I think than a virus files, due to I am unable to delete the files in my system, the folders are created in all of my hard drives. I want to hide this folder into the laptop. How can I do that, I want to know about windows defender is a work in my system are not how to check it in my laptop.

    Thank you & best regards

    Alain Rolland

    Hello

    These 2 files are normal for any installation of Windows.

    $recycle.bin contains data relating to the trash and the System Volume information contains the Restore Points to restore the system on each disk.

    Normally, these folders are hidden by default.

    In file Explorer, click the view tab in the Ribbon toolbar.

    In the Options Menu, select folder and search options.

    In the Folder Options window, select the view tab.

    Select the option do not show hidden files, folders, and drives.

    Click apply/OK.

    Concerning

  • GSM numbers in the TMS directory

    Hello

    I have AD facility as a source of the telephone directory in TMS for video settings. I'm having a problem where the GSM numbers for users on endpoints TP are appearing as H320 and so the calls fail. I have a VCS/TMS connected to CUCM and want to route mobile calls to CUCM and then get out. Is this possible.

    Thank you!

    Then I was watching your definitions of zone again.

    • TMS needs to know that the endpoint can make H.323/SIP
    • The permissions for the system in the browser from should not be the call blocking options (settings down to change the planning parameters)
    • The endpoint must be associated with a zone of intellectual property with a defined gateway prefix
    • The area of intellectual property must be associated with a correctly configured ISDN zone
    • Route of the directories = yes

    If all this is in place, TMS will be able to deliver to an end point unique h323 call entered ISDN or telephone through the gateway prefixes defined in the area.

    If the entries are not displayed, TMS does not believe he can do a call from the bridge... the lack of supported protocols or failure of registration status.

    You can test this by creating a simple dummy directory with just the vocal entries in it.  Then associate this directory to your endpoint.  If it's an MXP, you can use the web interface of the endpoint to display the directory of the business directory provided by TMS.

    If you can not make it work again, I'd recommend appellant TAC where they can walk through your configuration with you.

  • TMS directory against LDAP directory

    Morning,

    We intend to use a real directory like Phonebooksource.

    To connect through the AD, it's no problem, but the LDAP user has a different format.

    AD : >\>

    LDAP: CN = videoUnit, CN = Abo, CN is accounts, CN = System, CN = Apps, O = company, C = OF

    In this format, I tried a lot of.

    But nothing seems to work, does anyone know the problem?

    Greetings

    Jens

    No, not really, I'm afraid, I just need to know more precisely the type of LDAP you are trying to connect, if it's not AD... And what kind of Source of PB in TMS you try to use when you try to connect to the Directory LDAP AD, H350, H350 user directory?

    And if I understand you correctly, you are saying that you can connect successfully to say AD but not this particular LDAP that is not AD but something else... OK?

  • Write data to the Source folder

    I'm trying to change part of a script that I use for work he entered into the source of a file folder, run on rather than to a specific folder (in this case, the office).  Can someone help me understand how to change and/or by adding the code below?

    create the reference to the csv file

    var file = new file (Folder.desktop + "/ Data.csv");

    Open the csv file in Add mode

    leader. Open ("e", "TEXT", "?");

    jump to the operating system in use on the line set

    ($.os.search(/windows/i)! = -1 ? file.lineFeed = 'windows': file.lineFeed = "macintosh";

    at the end of the file

    leader. Seek (0.2)

    write all the information required for the csv file

    Name of the document, Date1, database2, donnees3, etc.

    file.writeln (decodeURI (activeDocument.Name) + ","Data1","Data2","data3"," + data4. ") ToString()', '+ Data5.toString ());

    Close the csv file

    leader. Close();

    Now, I'm assuming that the part to change here is Folder.Desktop.  And I think I will need to change this option to be Folder.getFolderName.  getFolderName is a variable used in other code that checks the source directory of the current file.  This code of source directory, it's what I do not know how.  The script itself would have to do the check whenever it is running as I want him to be able to work with included subfolder of batch runs, make a new file in the subfolder when working with these files.  Anyone has any ideas, how to proceed?  Any help is very appreciated!

    dgolberg

    Edit: I forgot to mention; It would be nice if it can also store the name of the folder in which the source file is in a variable, so it can be written to the file as .csv.  This is not as important as the code mentioned above, but it would be helpful none-the-less, if possible.

    No problem, I was able to solve it on my own all the time.  I thought it would be much harder than it actually was. but has been able to do by simply changing

    var foldLoc = new File ("C:\\Temp\\");

    var file = new file (foldLoc + "/ Data.csv");

    TO

    var foldLoc = app.activeDocument.path;

    var file = new file (foldLoc + "/ Data.csv");

    and now, it records the data and the .csv file in the same folder as the currently open project.  Thanks for trying to help; It is much appreciated.

    dgolberg

  • TMS Directory link ISDN paired devices

    Hello world

    I currently have a problem trying to get a directory TMS containing details of ISDN on a SX20 with an ISDN connection.

    I created a manual list directory in TMS that contains details whether H323 or ISDN for various parameters.  The directory is detected by the SX20 and it shows all the details of H323, but none of the ISDN are listed.  The same directory, when it is applied to an edge 95, displays all the entries.

    I tried to create a directory containing only the ISDN numbers, and assigning that to the SX20 and then nothing is indicated.

    My first impressions are that that TMS has information as an 'ISDN' entry, and as SX20 has similar directory information stored in the form "H320", that the two are not compatible / correcftly - translation and so it's a TMS bug and/or TC software.

    In addition to the telephone directory, all the other functionality works as expected.

    Versions:

    TMS: 14.1.1

    SX20:TC7.0.1

    ISDN link: IL1.1.0

    Edit: I tried to push the same directory for a C60 and who was not either - TC6.3 - only the H323 entered were seen running - ISDN those lacking, is not purely a matter of SX20.

    Wayne
    --
    Remember the frequency responses and mark your question as answered as appropriate.

    Hello

    There is no link to the SFT ISDN support. When 'route telephone directories' is set to Yes, TMS removes the entries she wants not the point endpoint to deal, that is what is happening here. TMS knowledge, SX20s cannot dial numbers H320.

    ? Kjetil

    Sent by Cisco Support technique iPhone App

Maybe you are looking for