TMS must be upgraded before TMSXE?

Hi team,

I don't know if I should post this question here, but I'm running MSD 14.4.0 and TMSXE 4.0 and want to update both. I want to upgrade the 14.6.2 TMS and the TMSXE to 4.1, can someone tell me what I should be upgraded first. I took a glance at the following link and it shows that the TMSXE should be the first. I'm what some confused because the other told me that the TMS must be first of all, if someone can check, thanks. P14

http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/TMS...

Hello

According to the TMSXE deployment guide (page 24)

http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/TMS...

You must also pass to the required version of the Cisco MSDS before beginning any installation or upgrade of Cisco TMSXE.

Manish

-Does the rate of useful messages-

Tags: Cisco Support

Similar Questions

  • Windows 7 upgrade advisor, Vista, says that Firefox must be uninstalled before the upgrade and that I won't be able to reinstall it, is it true?

    I'm currently running Vista, 32-bit. I am considering upgrading to Windows 7. I ran the report Upgrade Advisor and he said "Mozilla Firefox 20.0.1 must be uninstalled before the upgrade to Windows 7. You will be able to reinstall it after upgrading to Windows 7. "This seems inaccurate info, based on the Firefox site, but I want to check what I have to do before you start the upgrade. Leave Firefox installed and in place when I update or uninstall and reinstall then after the upgrade?

    Hello herplaw, you're right, this doesn't look good - firefox will work fine on windows 7. I leave it installed and to proceed with the update. in any case (if you need to reinstall it later), you can also save personal information that is stored in your firefox profile before continuing: back up and restore the information contained in the profiles of Firefox

  • "The computer must be restarted before upgrade can continue." You want to restart now? »

    This message appears every time that I reboot.  I do not know which update is, but he showed now whenever I started the computer last month.  How can I stop this message from appearing? I use Windows XP.
    See you soon

    Hello

    Every time that you start your computer, you see the following message is displayed:
    The computer must be restarted before upgrade can continue. You want to restart now?
    Your choice is Yes or no. If you click Yes, the computer is forced into a restart, but returns the message. If you click on no, you can work normally.

    QUESTION: You have an Adobe Reader 8 update failure. This update places an entry into a registry RUN key for the application "AdobeUpdater.exe. "AdobeUpdater.exe" application can be found here: C:\Program Files\Fichiers Files\Adobe\Updater5

    If you open these folders and double-click the 'AdobeUpdater.exe' application, you should see the same message as above.

    To check if you need to do workaround, do this first. Open Adobe Reader 8. From the Help menu select find updates. If the program checks the updates and concludes that they are, apply. This can solve the problem. But if you see the same error message after a restart,

    What solution would you suggest for those who also have Acrobat Pro installed? Uninstalling and reinstalling

    Registry key is here:

    Hkey_current_user\\software\\microsoft\\windows\\currentversion\\run.

    Please, right click on run and export to your desktop and save it as back.reg.
    Delete and restart. If the problem has disappeared, open Acrobat, and try to run the update - help-> update

    YOU PACK THE FACE WITH THE STEPS ABOVE, THE QUESTIONS PLEASE FOLLOW:

    Error 'Need to restart the computer', after you run the Adobe Update Manager

    Question

    After you run the Adobe Update Manager, you receive the error message "Need to restart the computer." You receive the error message during all subsequent restarts of the computer.

    Solutions

    Do one or more of the following solutions:

    Solution 1: Delete the file of transaction of AUM.

    Delete the file AUtrans.xml the Documents and Settings\ [username] \Application Data\Adobe\Updater folder.

    Solution 2: Remove the Adobe Updater.exe registry key if it exists.

    Warning: The registry contains information on the system that are critical to your computer and applications. Before editing the registry, be sure to make a backup of it. Adobe provides no support for any problems that result from incorrectly modifying the registry. Adobe strongly recommends that you have experience editing system files before you modify the registry. For more information on the Windows Registry Editor, see your Windows user's guide or contact Microsoft Technical Support.

    To remove the Updater.exe Adobe key:

    1. go to hkey_current_user\\software\\microsoft\\windows\\currentversion\\run.

    2 Select the AdobeUpdater.exe key (if it exists) and then choose the editing command > delete.

    3. click on Yes in the dialog box confirm deleting key.

    Solution 3: Find and remove the AdobeUpdater.rbt file if there is.

    1. choose Start > search.

    2. under what Do you want to Search For, select all files and folders.

    3. in the all or part of the file name box, type: AdobeUpdater.rbt

    4. in the box look in, select your local hard disk.

    5. click on search.

    6 remove the AdobeUpdater.rbt file search results if it is found.

  • Unable to play video with DRM error component of Windows Media Player must be upgraded

    When I click on the link provided something download and try to install but I get an error message indicating that the component cannot be loaded and returns me using Microsoft. What is thiis and how to fix it?

    OT:when I try to watch a video with DRM, I get a message that must be upgraded one component of Windows media player...

    Hello

    To resolve this issue, reset the DRM Bank on the computer. To do this, follow these steps:
    a. If Windows Media Player 12 is running, quit Windows Media Player 12.
    b. Locate the DRM folder on the hard disk, and then rename the DRM folder in backup DRM.

    By default, this folder is located in the following location in Windows 7:

    %SystemDrive%\ProgramData\Microsoft\Windows\DRM

    c. visit the Microsoft Web site at the following address:

    http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp
    d. follow the instructions on the website to update the safety component of Windows Media Player 12. This procedure allows you to obtain new licenses for media content. You can also reset licenses for purchased content so that you can play that content on a computer.

    Note On a Windows 7 computer, you must run Internet Explorer as an administrator before update you the safety component of Windows Media Player 12. To do this, follow these steps:

    1. click on start and then click all programs.

    2. right click on Internet Explorer and then click Run as administrator.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

    Note You must contact any third-party stores where you purchased music to reset the licenses for that music. If you copied CDs for protected Windows Media Audio files, the CD must be copied again.
    Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  • GUID value for 14.4 TMS must be configured on F5.

    How get the 14.4 TMS GUID value must be configured on F5. 14.4 TMS upgrade guide, the value of the GUID of the TMS must be entered in the string to send to probe.

    #CREATE MONITOR for TMS KEEPALIVE THE GUID IS FOUND in TMS GUI tmsh create ltm monitor https mn-TMS-HTTPS {DEFAULT cipherlist: + SHA: + 3DES: + kEDH compatibility enabled by default - https destination *: 443 interval 5 past drifting recv 200 recv - disable 503 send "HEAD /tms/public/IsAlive.aspx/? '} {"Guid =\\r\\n" time - until line-up 0 timeout 16 username 'DOMAIN\rname'}

    Are you referring to a redundant deployment of TMS?

    If so, take a look at page 31 under the section "Configuring network load balancing."

    You will find the URL Probe in TMS with a specific GUID to this knot here:
    Administrative Tools > TMS Server Maintenance > TMS redundancy > probe URL

  • Boot Camp: This disc seems to have been divided by another utility. It must be erased before installing Windows.

    I have a SATA Western Digital to 6 TB drive on my Mac Pro 2012.  I thought "what better place to put a bootcamp partition?  But when I went to use the Boot Camp Assistant, I was greeted with this:

    Boot Camp: This disc seems to have been divided by another utility. It must be erased before installing Windows.

    I thought ' OK - I'll delete data... Use utility disk to erase the disk completely, and then try again.  After a few hours, I used... completely partitioned disk utility disk and tried again.

    Same message.

    It seems that for some reason I can erase completely and use the entire disk for Windows (blah) or should I use another drive or not Boot Camp at all.  Is there a problem with the size of the hard drive Boot Camp can support?  Any advice?

    Hello ElPapa,

    Thank you for using communities of Apple Support.

    I understand that you want to put a Boot Camp partition on your Western Digital HD connected to your Mac Pro. What is your boot drive? If this isn't the case, it could be part of your problem. According to the following article on installing Microsoft Windows using Boot Camp, it is said that you need "at least 55 GB of free disk space on your startup disk".

    How to install Windows using Boot Camp

    If you install it on your boot drive and still get this message, take a look at this article: Boot Camp: alert message Partition when you use Boot Camp Assistant

    Best regards.

  • I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update

    I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update itunes?

    Hi sonalnj,

    I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.

    According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.

    iPhone 6 s Tech Specs
    http://www.Apple.com/iPhone-6s/specs/

    Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.

    OS X Lion mountain
    http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

    Now the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.

    Update of OS X El Capitan
    https://support.Apple.com/en-us/HT201475

    Nice day!

  • "This copy of Windows must be enabled before you can login."

    We have a laptop with Windows XP we have used for a while without problems.  All of a sudden, we get a box to activate product windows that we never had before, demanding that "this copy of Windows must be activated before you can connect."  No new software has been installed recently, so this seems very strange.  Is this a virus or is it true?

    These steps will work as long as the PC has only one user profile, and to Internet Explorer 8 is installed.

    In my case, I:
    (1) the steps already listed here, with an adaptation: safe mode: command prompt
    "Start in"Safe Mode".  To do this, turn on the laptop, and then press F8, as it is booting up.  Passes in 'Safe' Mode by selecting the option 'Safe Mode'. * Safe Mode command prompt *.
    Once you're on the office in 'Safe Mode', click 'Start' then click on 'run '.
    At the command prompt run type the following EXACTLY

    Rundll32.exe syssetup, SetupOobeBnk

    (2) restart the PC and start back in Safe Mode command prompt.
    (3) on a separate computer, download IE8 for WinXP and put it on a USB key. I renamed the file IE8install to make it easier later.
    (4) plug the USB on the problematic PC
    (5) in the command prompt installing IE8. Your USB drive letter may be different. If e: does not work, try f: etc until you find the right one.
    type e: * enter *.
    ie8install.exe * enter *.
    (6) complete the installation, restart the PC, and you should be good to go.
    I thank everyone in this thread for their help. He points a headache hours.
  • Get the error message "Windows must be enabled before you can connect. You want to activate now.

    Original title: impossible to activate Windows XP

    I had to reinstall XP Professional. Now, when I start the computer get a message saying "Windows must be enabled before you can connect. You want to activate now? ». When I click on Yes, the desktop backround sometimes nothing happens. the activation wizard does not open and no error message appears always.

    Hi Dale,

    Since you are not able to open a session in normal mode, log in in safe mode and perform a few steps that would help you solve the problem.

    Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

    Perform the steps mentioned below and see if it helps.
    a: turn on your PC
    b: Press F8 repeatedly , then in Mode safe
    c:
    Logon as per normal
    (Note: administrator password is usually empty, but I hope you know your password)
    d: Authorize the Office to load completely (who answered "Yes" to continue mode without failure)
    (Note: this is just a long way to say go to Safe Mode)
    e: Click Start - run
    f:
    type exactly: rundll32.exe syssetup, SetupOobeBnk (then click OK)
    (Note: a single space after 'rundll32.exe' also the Oo are two letter o in "oobe"; capital and the comma are important)
    g: Wait a few seconds (although you won't see any change)
    h : Restart your PC normally (start - stop - restart - Ok)
    i: You will be able to return to the Normal Mode.

    Good day!

    Answer please if you have any questions.

  • I managed to install Service Pack 2, it shows SP2, now it won't let me download me SP3 because he said I must have sp2 before I can download sp3

    I managed to download sp2 and it shows SP2 when I right click on my computer.  Now it won't let me download SP3 because he said I must have sp2 before I can download the sp3!  Any thoughts?  I just reinstalled XP on my old computer of sisters.

    Try to download the SP3 directly to your computer and run it from there.

    Service Pack 3: http://www.microsoft.com/en-us/download/details.aspx?id=24

    I hope this helps.

  • This copy of Windows must be activated before you open a session and I clicked Yes, but nothing happens.

    End of August 2011 I prepare a trial version of Windows XP Professional x 64 edition that should be expired after 180 days on a new computer, IE. by mid-February 2012. However, already during this week of the first of January, I received several times a popup: ACTIVATION of PRODUCT WINDOWS, announcing that the trial period has expired and that in 1 hour Windows will disconnect and I should install a copy authentic. So I by installation of R, but after installing COPY WITH GENUINE LICENSE has a new a pop up appears saying: "this copy of Windows must be activated before can connect you. You want to activate Windows now? I clicked YES, and nothing happens. Without log on the system installs several times more than 120 updates but still no access to the Windows Activation to complete activation and Windows Update again.

    This was where a frustrating experience because on another new computer I had installed very easily Windows XP x 64 edition without any problem using another copy authentic.

    Someone at - there a solution to this problem?

    Thank you very much!

    GWVS

    E-mail address is removed from the privacy *.

    or

    E-mail address is removed from the privacy *.

    I suggest that you post in the WGA forums that specialize in these issues.

    read the announcements at the top of the page, and publish a report of diagnosis of MGA as well as all relevant information.
    EDIT: should be passed my bedtime. I forgot to paste the link
    Also when you tried to activate you spoke to a real person?
  • Y at - it a link to the free update or I must first upgrade to Windows 7 and upgrade them to Windows 10?

    Original title: Dee

    I have an old Dell Inspiron 15 with Vista Home Premium and want to switch to the window of 10. Y at - it a link to the free update or I must first upgrade to Windows 7 and upgrade them to Windows 10? Or could it be the Windows 10 Pro?

    The free offer of Windows 10 is not available for Vista.  You need to upgrade to Windows 7 SP1 or Windows 8.1.

  • I can't have external floppy drive to work error "diskette must be formatted before use"

    Origignal title: problems with EXTERNAL FLOPPY DRIVE

    I have a floppy drive external that I don't use that occasionally (supporting my sewing machine) - I use it to transfer files digitiezed to my sewing machine.  It worked fine until after a recent Ms updates, now I can not work at all and I tried to reinstall the current drivers and I get an error message that the floppy drive must be formatted before using, I try to format it and it errors and says it can not be formatted.  If the device is recognized, but there seems to be a problem with the communication and the operating system.  I know WIN7 users encounter the same problem, but I have Vista...  Help, please!

    Hi Sylvia,.

    Thanks for choosing Microsoft Community!

    You have reached the right forum. Let us work as a team and try to solve this problem.

    If I understand correctly, the external floppy drive does not work on the Windows Vista-based computer.

    We defer the following methods:

     

    Method 1: Run the following fix - it:

    Hardware devices do not work or are not detected in Windows:

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

     

    Method 2: Check drive for errors.

    Check your hard drive for errors:

    http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

     

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

  • "Relay denied, must check email before sending. Help

    n Outlook I sometimes can't send e-mail. I get the message "relay denied, must check email before sending. I checked it all first... it's very frustrating.

    Relay attempts to send an e-mail through your ISP when you are not connected via your service provider (if you are in an Internet café or similar).  In this case, your ISP blocks the message sent, as some have used to spam people in the past.  So if you are connected to the Internet via another source as your ISP, you cannot send messages.  You can try to contact your ISP and telling them the question and see if they have a resolution for you (some have special settings, you can use).  Or maybe it's just a little problem on the ISP side, so it's a good idea to contact them in any case.

    Steve

  • Error - Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes. If the drive is not formatted, you must format it before you use it

    Original title - Windows cannot read blank disc

    When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...

    Hello

    Thanks for posting your query on the Microsoft Community.

    According to the description, I understand that you have a problem with the disc.

    As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.

    I suggest you run the Fix-it tool and check if it helps.

    This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.

    See the link below.
    https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0

    As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.

    Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.

Maybe you are looking for