TMS Smart Scheduler by default time change

Is there a way to mass change the default time in the smart Scheduler of TMS or must it be done individually by users? IE; the date format, that everyone has in their account settings.

I don't think it's possible, at least I have not found a way to do it, and it isn't docuemented as something that can be done.  Probably best to reach out to your Cisco account manager and see if they could submit a feature request to allow control increased the admin user accounts.

Tags: Cisco Support

Similar Questions

  • Zone TMS Smart Scheduler

    Hello everyone,

    where the smart Scheduler Gets the time zone? I realized that I have configured under "TMS > administration tools > user management > users.

    "(UTC + 01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna" as time zone but when I connect in a Smart Scheduler and audit "date and time" in the settings it shows "(UTC + 01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague. The email invitation and the ics calendar invitation I receive after booking also see the wrong time zone.

    Tested woth TMS 14.2 and 14.3. Same effect on both versions.

    Best regards, Daniel

    Improved in the next version of TMSPE

  • TMS Smart Scheduler - what can you schedule and dial a number?

    Hi Forum,

    I think TMS 13.2.1 at 14.3 TMS with TMSPE 1.1 reclassification.  However, I saw that the 'old' web scheduler has been replaced by the new smart sceduler.

    You can plan the new smart Scheduler? It seems that you can only program calls to numbers in directories?  You can schedule dial calls to:

    Directory movi/Jabber?

    External SIP/h.323

    External ISDN?

    What can't the new smart Scheduler compared to the 'old web Scheduler '?

    Thank you

    Robert

    Robert H.

    Yes, at this time, you can add managed by TMS systems (those that are added to the system > Navigator) when planning through Smart Scheduler.

    Cisco has already opened a feature request for the opportunity to add directories or call the participants in the smart Scheduler interface, but I cannot confirm if Cisco really wants to develop or when it will be available. It's the already opened by Adam feature request:

    https://Tools.Cisco.com/bugsearch/bug/CSCug76084

    A solution would be to add your external endpoint as a 'room' to TMS under system > Navigator, so that they will appear on Smart Scheduler, however, systems added as piece takes a license system just like a common system managed by TMS. So, before you follow this workaround solution, make sure that you have licenses enough for that.

    Can my personal thing, if you really need schedule the call out participating, so I suggest you use common reservation interface, at least up to the Cisco enhance Smart Scheduler.

    In addition, to raise this feature request you, your local Cisco representative so that they can help you to climb this feature in Cisco request to try and get priority on this point, it is useful. More customers are asking for the same thing, more Cisco considers that the feature request.

    Concerning

    Paulo Souza

    My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

  • Hide portals TMS (Smart Scheduler or FindMe) Options

    What determines which of two Smart Scheduler and FindMe options in the TMS portal users can see?  I had not connected with a user who has absolutely no permissions set within TMS, and they could see Smart Scheduler, however it wrong on when I clicked it.  Is there a way to hide the smart Planner and only show FindMe or choose what users can see two options?

    Thank you

    Patrick Sparkman wrote:

    [...] Is there a way to hide the Smart Scheduler and only show FindMe, or choose what users can see of the two options?

    I don't think it's possible. All users can see both, but (from TMS 14.3.2) only users that are part of a group that has

    'Booking'-> 'Misc'-> 'Booking' permissions in TMS can plan actually by using Smart Scheduler.

    Kjetil-

  • TMS default time zone

    Hello

    I have a worm tms 14.3.2 an i try to find how to change the time zone.

    Whan I go to Administration > general framework > it needs to be under the key release of tms, but its no showing it.

    I enclose a print screan.

    It started because my smart Planner give my a wrong timezone.

    Help

    TMS uses the time settings of the server as the 'default' time, each user may, however, change the time zone relevant to their particular circumstances to into the details of the user; Users/administrators/Tools User Administration - Select your name and you should see a page like this:

    /Jens

    Please note the answers and score the questions as "answered" as appropriate.

  • Launch of TMS 14.2 error, TMSPE 1.1, Smart Scheduler

    Hello

    I run a laboratory for a client in which I should test Smart Scheduler, but I can't it launched. I have the tmsagent/cann access portal. I can click on the button home th and the settings button. I can access findme configuration but Planner smart would not launch with an error message, otherwise, it would probably be a java problem (from what I've read in the forums and guides). the message is

    There was a problem connecting to the server scheduler: could not send message.

    No idea what this message is linked to?

    Thank you

    Cecile

    Hi all

    Indeed, it is a bug. Unfortunately I do not have a reference of bug for you right now. Once I have one, I'll let you know.

    The problem comes from different server configurations regarding the use of the address of loopback... which means in this case, we work, they do not use the loopback address on their server. For example and looking at the IIS logs and when the loopback address is used, you should see something like the following on the SS:

    2013-05-28 09:03:25 POST /tms/external/booking/bookingservice.asmx 127.0.0.1 -------127.0.0.1 TMSScheduler 200 0 0 31

    In the case of the customer, they see the following:

    2013-05-29 15:50:48 192.168.x.x POST /tms/external/booking/bookingservice.asmx - 443-192.168.x.x TMSScheduler 200 0 0 31

    Note the return of the local IP address compared to the loopback address.

    In your case, I'd take a peek in the IIS log after you throw the SS error... and see if it's what you see.  If Yes, then it is the same problem and this is the problem we are fixing... which means that we will check not only for the loopback address, but the local IP address as well.

    see you soon,

    Dale

  • TMSXE and TMS 'configuration buffer by default'

    TMS: 14.3.1

    TMSXE: 3.1.2

    Although we have setup in the TMS, the "default buffer' to 10 mintes, we are not able to start meetings in advance. Looking at the documentation it says:

    "ATTENTION: do not enable installation and destruction of the buffers if you are using the smart Scheduler, Cisco TMSXE or any other application that uses the Cisco TelePresence Suite Extension reservation management API, as the API does not support these pads."

    So if this is true, how can we configure the TMS/TMSXE to allow meetings begin in advance?

    Hi Matthew,

    You can not currently configured TMS to launch conferences in advance if you are planning a TMSXE/Exchange.

    This will change in a future release however, see TMS 14.3.2 Release Notes page 48.

    Kind regards

    Kjetil

  • default time reminders

    How to set the default time for a verbal reminder rather than 09:00?

    I would like to ask Siri to remind me of something-"Remind Me to go _ Monday." If I don't say not once, it defaults to 09:00. I want to be like 05:00, so I see him first thing in the morning when I check my phone and can plan my day around it which by default. Is it possible to reset this default time rather than manually or to say every time?

    There is no way to change this default value. You will need to specify both.

    You can send feedback asking this feature here:

    http://www.Apple.com/feedback

  • TMS smart Planner 14.2 ISDN Dialin Participants

    Hello

    With the old Scheduler, it was possible to choose ISDN for participants of callin.

    With SmartScheduler, you can choose "Forums Participants" and "audio Calling" but you can not choose ISDN so prevered Protocol is SIP.

    We have participating callin calling in via ISDN.

    Using the Scheduler by TMS you can choose 'Extern' and 'ISDN' for Nicole, you can't do with Smart Scheduler.

    With SmartScheduler the informationmail contains no ISDN Callin number.

    With the planner of TMS, the mail contains Callin number ISDN.

    But your users must use SmartScheduler because it's easier to use than the Scheduler in TMS Administration side.

    The ideals?

    Kind regards

    Martin

    Hi Martin,

    Planner smart planning only external SIP clients.  There is no ISDN remote access or outbound external.

    Potentially, you could book external ports for remote access.  If your ISDN gateway can connect to your MCU it would work.

    Gateway ISDN ISDN user calls, and then between address Conference call to MCU.

    Greetings

    Thomas

  • Daylight Savings time has elapsed - emails planned times changed?

    This weekend is over to Daylight Savings Time. I got an extra hour of sleep! Today, when I checked my campaigns in E10, I noticed that scheduled on all of my emails nurture has changed. This weekend, the planning time was Tuesday - Thursday between 10:00 and 15:00 central time. Today, the programming time is Tuesday - Thursday between 11:00 and 16:00 central time.

    Has anyone else has this problem? I was wondering if it was just me or if it happened to everyone as well.

    From what we can tell, Eloqua may adjust their servers for the time change, but this does not mean that they adjust the time periods applicable to your work. I work with them to adjust their schedules to be in harmony with our first direct go set up.

  • After travel or time change, capture image downloads new pictures

    I do not erase the cards immediately after the transfer of photos to my computer. Sometimes I'll use a card that has files that it contains are three months to one year, but which have already been uploaded to the images folder. After the "spring from here" and "fall back" time changes, when I use Image Capture to transfer images I've done since the last download, it also downloads the 'old' still once, change the time of the capture of an hour and adding a space and a '1' at the end of the file name. I do not change the time in my camera for changing the time twice a year, and I leave winter time in the area where I live most of the year. If I'm living in the same place for more than a week or two, I have sometimes, but not always, change the computer's time (or let the computer determine the area according to its location).

    To further complicate things, this also happens if I travel between two time zones. There is in the computer of the images that have been made in Vancouver (Pacific time zone) on May 3, 2015. On May 4, while remaining in Vancouver, I downloaded the files on the computer. Such a created file date shows may 3 at 21:13. On May 10, while in New York City, I downloaded images made in New York on 8 May. At the same time, Image Capture download new images of Vancouver, but shows them as having been made three hours earlier than that shown in the previous (Vancouver) download. Very probably, at this time, the computer has been set to automatically set the time zone according to the place or I reset the area because I was going to be in New York for several months. Below a screenshot shows this.

    Of course, this duplication takes twice the storage space. This means also having to spend time to throw the double copies. Or triple copies, sometimes quadruple copies, if the memory card contains pictures that spans two or more changes seasonal clock.

    Is there a way to avoid this? If data in the camera exif photo has not changed, why the computer would have any idea that the official time (or time zone) was different?

    Thanks much for the ideas you may have.

    Leonard

    Is there a way to avoid this? If data in the camera exif photo has not changed, why the computer would have any idea that the official time (or time zone) was different?

    Photos will use the time current system as the time to interpret the timestamp on the pictures in the camera.

    If the camera time is different from the time of your system, it makes it easy to import, if you set the area of working time in the preferences system at the same time basis as the camera before importing new photos.

  • sampling time changed the buckle timed

    Hello world

    I use the timed loop to control the DC motor with the vi of PID. in the loop and the sampling time are defined as 0.01 s. However, after I added a few other screws in the loop, for example, writing of measure file.vi, to collect the errors between the angle and the practical perspective of the engine for the time histroty the movement of the motor, we find that the sampling time changed, not always 0.01 s before the vi has been added, but 0.01 or 0.02 s. the entire program desinged to be fininshed with 7 s, now's done it at 9.4 s, that is, execution of the loop time is extended.

    Another thing is, if the sampling time is defined as s 0.05, the sampling time is always 0.05 s and the execution time of the loop is always 7 s as predined, regardless of writing custom file.vi is added in the loop or not.

    As a result, I think that if the complexity of the loop is incresead and time of sampling sets is small, then the actual sampling time will be modified due to the design of things load in the timed loop. What is the reason? If so, are there methods to solve?

    It is important: the collection of the angular error of the engine in the time histrory is very important, which will be used to show the correctness of the settings KP, KI and KD.

    A friend suggested using the queue vi, but I don't really know how to use them. Can someone give some instructions?

    Thanks a lot!

    See you soon

    Cram features in a timed loop is like stuffing 5 books you know that in a book bag 3. The timed loop is only really practical on a rt system, but even in this case, if the code inside requires more time than the period of the loop, there is no magic that the loop can do to increase the execution time. Just point out you that the loop is late. The solution is to remove features from the inside of the loop. Writing to a file of measure is one of the worst if you write to a text file. Look at the producer/consumer model of design that you have examples of. There, you will have a normal loop that you will write to a queue, and a second loop will process data in the queue. Use file > open...

  • What is the default time after which a temporary internet file is saved

    When we browse the net or write e-mails, temporary internet files are created and stored in the system. I want to know what is the default time after which a new temporary internet file is created for the same browsing session, especially when creating e-mail with attachments.

    When we browse the net or write e-mails, temporary internet files are created and stored in the system. I want to know what is the default time after which a new temporary internet file is created for the same browsing session, especially when creating e-mail with attachments.

    http://en.Wikipedia.org/wiki/Temporary_Internet_Files

  • is there a log of time changed under xp?

    Nice day

    I need check time date changes.
    In windows 7, I can do this by using the event viewer, but in windows XP, the event viewer does not record the change of time

    Where can I find these data.

    Kind regards

    Nice day

    I need check time date changes.
    In windows 7, I can do this by using the event viewer, but in windows XP, the event viewer does not record the change of time

    Where can I find these data.

    Kind regards

    =====================================
    The following links may be worth a visit:

    Time change captured in the log of events - event 577 and 520
    http://www.stevebunting.org/udpd4n6/forensics/timechange.htm

    How to check if auditing is enabled & how to turn on
    http://www.windowsecurity.com/EventLogScan/auditing.htm

  • Time changes after restart System

    original title: clock issues

    the date and time on my pc should be set every day because it does not, how can I fix

    Hi steve. INA,

    1. did you of recent changes on the computer?

    2. do you have security software installed on the computer?

    Method 1

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. Click Start , and then click run.
    2. Type msconfig , and then click OK.
      The System Configuration utility dialog box appears.
    3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
    4. When you are prompted, click restart to restart the computer.

    Method 2

    If the previous step fails, then you need to check if the time changes system even in the system Bios after the computer restart.

    You will need to consult the computer manual to find out how to start the system Bios or contact the computer manufacturer.

    Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

Maybe you are looking for