To access Advanced Options in BIOS on Satellite U500-12J

Similar Questions

• How to access the advanced settings of BIOS on Satellite P100?

  Hello.
  I have Toshiba Satellite P100-324.
  How can I access BIOS adv, such as USB Legacy Support settings?
  For example, Free BSD so requires, also my older hardware.
  Help, please! :)

  To enter the BIOS pleas try to press "F2" immediately after booting the laptop.
  I think Phoenix BIOS has been installed on this device, and therefore the F2 key must be correct.

• I can't access all the settings BIOS with Satellite Pro M10

  Hello, I have a little problem with my satellite pro m10.
  When I press the button 'on', I see the toshiba logo. (normal)
  I want to get into the bios, I push the button "esc". Now, I see the message "check system. Then press [F1]. So, I push the F1 button.
  Now I can see "password ='"
  I push the button directly enter, and I have access to the bios. But my problem is that I can only change the date/time, password and the hard drive password.
  I can't access to other environments, such as boot priority, show, another.

  In the beginning, I think it's the fault of password, but I try to change it and I have no results.

  Please help me.
  Kind regards

  Hello

  What happens when you remove the BIOS password?
  Have you tested it? If this is not the case, check it.

• Want to m6: unlock the Advanced Options in Bios Insyde F.36 tab

  Hi I need advanced access tab ptions in f.36 insyde bios but I don't know how to activate this tab. Can someone tell me how to do?

  Thank you!

  HP consumer notebooks do not have this ability, only is to hack the bios file and reflash the cmos, it is very dangerous and may stop brick of the PC, now it can only be used for a door.

• Satellite U500-12J - how to remove the DVD slot?

  I put a small DVD into the slot for DVDs.

  Currently the work of trifles: the dvd is lost into the slot, it can not be read and cannot be deleted.
  IST is possible to easily remove the whole out the small dvd dvd player?
  I'm knacked!

  I hope someone is able to help me!
  Ruby

  What Satellite you do you have?

• BlackBerry smartphones 'Advanced Options' lack of OPTIONS. HELP PLZ

  By clicking on the home screen Options, does not show the menu 'advanced options' item. He has been there nut has now disappeared. "It was" the last menu item in the option, but now the last of them is "third-party Applications.

  In order under Options in the list is the following:

  1 sounds and ringtones

  2 network connections

  3. the screen

  4 typing and entry

  5 device

  6. call management

  7 security

  8 accessibility

  9. third party Applications

  Where is ADVANCED OPTIONS? !!!

  What you have stated, what offers the torch.  You can refer to an older o/s.

  To access advanced options, you have to go to Options > device > advanced system settings.

• Satellite U500 - need BIOS original Ducati Edition

  Hello!

  Anyone the original bios Toshiba Satellite U500 Ducati Edition with ducati logo?
  Send me an email [email protected]

  Thank you to

  Sinercely

  Tomas Muikku

  Hi Tomas

  It is not easy to help but please be so kind and post the exact reference of your machine. I would like to check something on the Toshiba download page.

  Maybe it's the PSU5EE part number?

• Since the update by Satellite L750 - Win7 for Win10 I lost access to the UEFI BIOS)

  Hello everyone

  Since my upgrade to Windows 10 32 bit Windows 7 32 bit, I am unable to access the BIOS (UEFI).

  I try to access BIOS because I want to do a clean install of Windows 10 64-bit, DVD, or USB key.

  I did the setting-> security update & -> Recovery-> Advanced Startup restart now-> then I clicked on troubleshooting-> Advanced Options-> and I can not find the UEFI (BIOS) settings.

  When I start my computer I lost the option "Press the F2 or F12 key" to access the BIOS.

  Thanks for your help.

  My computer: Satellite L750, PSK2YA-0L0802S

  OK if you are interested in the topic you can try with a facility for testing purposes, but if there are many different issues and problems, I think that you should install the recovery original image again and use your laptop with 'presets' again.

  You can enter the BIOS settings?

  In General, you can try to start the installation of USB if you press F12 on startup and choose USB as a boot device. It works for you?

• The computers BIOS laptop satellite 1800-554 configure access

  Thank you very much NickyNoogle for your response, however I just can't find a way to open the BIOS set up! Startup windows pre only option is F8 for advanced options start taking me in a list of options such as the SafeMode startup etc. You have new ideas to help my? My address is [email protected] if you want to contact me directly. Best regards, Kevin

  Hello

  Like Jasmine said trying to push the ESC key, then press F1 when the unit starts the boot process.

  Good bye

• No AHCI in the BIOS in Satellite Pro A200

  I just installed an ssd and would like to change the bios to ahci utility but it is not an area that I am able to do this. the computer is a Toshiba Satellite Pro A200 (psfa1a-003002).

  I have to update the BIOS? Where can I get the update and how can I update?

  As I know the BIOS update does not offer some additional options. Please check the settings of the BIOS again. In the BIOS options there SATA advanced option and there you can change between compatibility and AHCI mode.

  I have it on my P200. It is almost identical machine but 17 and your model 15.

• Satellite U500-1F5: eco and FN buttons do not work after BIOS update

  Hello world

  I hope I can find a solution for my problems here.

  I bought a new Toshiba Satellite U500 (PSU9ME),
  I'm updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center.

  Last week I received an alert to updat the BIOS and I did. Since then, I've noticed the following problems:

  1 eco utility does not work, and when I tried to uninstall, it says (not supported BIOS)
  2. on screen funtion buttons that appear at the top of the screen when you press the Fn key no longer not apear
  3. the touchpad lock / unlock button does not work, and even by pressing Fn + F9 doesnot lock

  I hope you can give me an answer about my problems,
  I already downloaded the latest updates for the eco and value-added packege of the toshiba site and install,

  BUT

  does not my prob

  still eco utility does not work. The msg (not supported BIOS), appear when I run the update.

  The bar of buttons on the top of the screen does not (even after I uninstall the package of value of toshiba and re - install the last being) and the locking/unlocking back touch button does not work.

  I hope Toshiba can find me a solution, coz I don't have time to go to the DEPOT
  PSU9ME00D00XAR model U500-1F5

  Windows 7 (64)

  Thanks in advance

  Hello

  First one comment:
  * I am updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center. *
  That s is nice, but certainly not necessary. When the system is working, do not touch or change anything. Maybe stupid sounds now, but I recommend you to remove the TEMPRO system. Believe me you don't need. I have 2 years old Satellite A300 and original BIOS. It works perfectly and I don't want to take any chances and to change what anyone. Since last month, I have the Satellite U500-1EX and will do the same. TEMPRO is already removed, and I am happy with the factory settings.

  All that you have done is OK, but at least you can try to reinstall entire OS now using HDD recovery option (F8 at startup) to see if everything works well again. Sorry, but if this will not help, I think that you need the BIOS downgrade to the old version.

• Satellite U500 - 11G - noise of the fan speed after BIOS update

  Hello

  I have the Toshiba Satellite U500 - 11G.
  I've recently updated the BIOS because my CPU fan did not work under Ubuntu,
  But after the update, my CPU fan speed is faster then normal and make a lot of noise (even if the CPU is cool) when I use Windows 7 is still stay on fast speed making a lot of noise.

  Do we sort of degrading the BIOS or thw way to earn the slow CPU fan speed?

  Concerning
  Sagar

  Update BIOS because of Linux? You know that Linux is not possible on this laptop model?

  In any case, to reduce the fan sped Please reduce the cooling in saving settings method.
  Control Panel > Power Options > go to your preferred power plan settings and choose advanced power options > Toshiba saving settings > cooling method > set to optimized battery.

• When I turn on my windows XP computer, I still get to the Windows Advanced options menu. that pressure?

  WINDOWS XP my computer came during a break current, but when I turned it back on it keeps going to the windows advanced option menu? Safe mode button is not do anything or start windows normally. Don't know what to do?

  You can select "Disable automatic restart in the event of system failure" and the next time that the system restarts, you should get the "Blue Screen of Death" (BSOD).  This will include a stop code and other diagnostic information that can help people help you here.

  (text below in italics with the permission of L elder)

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text, unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  However, more than likely your system files has been corrupted by the power failure.  Use your genuine Windows XP installation CD to start the Recovery Console:
  (see http://pcsupport.about.com/od/fixtheproblem/ss/rconsole.htm)

  1. Put the CD into the computer and restart
  2. When the message "press any key to boot from the CD" press a key (if you don't see this message, you will need to enter your BIOS and set the boot order to boot from CD first) (if you don't know how to set up your BIOS, see http://pcsupport.about.com/od/fixtheproblem/ss/bootorderchange.htm)
  3. Once the files load from the CD, press R to enter the Recovery Console
  4. You can get about choosing an installation; the usual answer is C:\Windows
  5. If you have set a password for the 'Administrator' account, enter it now; the default is blank (no password)

  At the command prompt (C:\Windows >) type the following and press enter

  CHKDSK c: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  If you don't actually have a real Windows XP installation CD, you got nothing to worry about.  Follow the instructions of the elder s below:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).
  

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.
  

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Unfortunately, I'll be away from my computer for the next 2 or 3 days... then if the above does not help, and that no one else jumps, have patience.
  

• XP sp3 impossible to access the Options Menu with the keyboard

  When you try to access the security mode of the Advanced Options Menu does not respond to the keyboard. Cannot use the arrow keys to select or even select normal startup. Completely locked. Must restart. Have installed the latest drivers for the millisecond (MS Intelli Type Pro and drivers dated 29/06/2010 ver. 8.0.2190). When accessing the BIOS function and XP and all apps also all keys.

  Keyboard purchased 26/01/2011. MS Wired Keyboard 600 model 1366.

  You wish to have access to safe mode back

  The system I have, I built from the bottom upwards, it's been about 5 times. Keyboard is USB, HARD drive is IDE.

  The reason I wanted was fashion safe to remove the access and the application that cannot be removed using my program uninstaller or add/remove Control Panel. This is a secure application that I used for the password protect and hide the request. I installed the new application and should have opened the former access to files, but not installed the first new. And now, the old file is protected course. But in Safe Mode saved the day. I used msconfig to start safe mode. Neverhad this happen in the past, the only change is the keyboard and Sp3.

  Hey once again thanks for your time, really appreciate it.

• F8 key does not have the advanced option!

  CS_SystemLabel

  XPS 15 (9530, end of 2013)

  CS_OperatingSystem

  Windows 8

  I want to do a factory reset and return to the first configuration of my Dell XPS, but when I click F8, it won't go to advanced options, as it normally should, I clicked several times on the F8 key before and after and and each time, but it never shows the advanced options should be , can help you on this? Thank you

  yorlink

  I managed as well to recover my product key OEM Windows 8.1 :)

  Now, I've left two questions:

  (1) why the F8 key does not work as it should!

  (2) where the recovery partition? I mean I say I format the C: / drive, I'll still be able to save the factory OS or this partition is located in another hidden partition?

  In fact my XPS is still under warranty, but when I contacted DELL support they told me by email that they are not able to call me because the PC was purchased from the United Kingdom and that I am not located in the United Kingdom they call me not, turn on! and after that, I asked just for the answers to my questions, but they still didn't have answer,

  Just don't call it premium support because it is not

  1. the UEFI BIOS and SecureBoot so that the change in the way Windows 8.1 boots. So that the 8.1 Windows start faster than Windows 7, there is almost no time for the user to type F8. This method to access boot options is obsolete as Windows 8.1 simply boots to fast.

  To get started, hold the SHIFT key while rebooting. Please see here for more details:

  https://www.YouTube.com/watch?v=fqqgk2fOtGU&index=5&list=PL1RkaknDn7v88-b9HVWAauoWSHDQhoe4w

  2. the recovery partition resides on the same hard drive as a partition unlabelled. Check out this guide here, when I was testing Dell Backup and Recovery on a clean install using the version 1.7.1.2:

  https://www.YouTube.com/watch?v=xKJjg0VAkIQ&list=PL1RkaknDn7v88-b9HVWAauoWSHDQhoe4w&index=1

  Should not be in this version that the recovery partition has been labeled and this has been fixed in version 1.7.5.64.