# To access Internet changes with each network connection

Sometimes, I get a popup asking where is my network location.  Most often my access Internet says network 5 or 7 network, etc.  I cannot get Internet access via network 3.  This just started happening after I upgraded my Iolo System Mechanic Version 14.5.  I uninstalled from this program, but the network problem.  Is there a way I can apply 3 network to my Internet access, so it won't change.  To reach this network 3, I have to unplug my modem and then plug it back again.  I have Windows 7 Home Premium 64-bit.  Thanks for any help!

I searched the Internet & found a good program that totally solved my problem.  I found this program network card to the: http://www.freewarefiles.com/NetAdapter-Repair-All-In-One_program_101201.html

Thanks for trying to help me, but this problem is solved now.  However, I still have a device of USB mass storage off that I was unable to trouble & I don't know if I need to worry about this or not?

Thanks again!

Tags: Windows

Similar Questions

  • Problem with the network connection Wireless since installation of win 7.

    I ve just installed Windows 7 last week and no problems until yesterday when all of a sudden my laptop can´t to connect to my wireless network... Strange because my Iphone can't, so it seems like there is no problem with the network.
    And the funny part is that when it detects one network different, other than mine, it connects and works very well!

    I ve tried unplugging the laptop and Wi - Fi connection, but it just says that it can´t to connect to the network... He finds it, but when I click on connect it says only: No..

    What to do?

    Hi KlinzmannFussballspielerin,

    Welcome to the Microsoft Answers community.

    Before you try the procedure below, change the security settings for the firewall at various levels and check if the problem persists.

    I suggest you to update the network drivers.

    Steps to update of network driver:

    1. click on the Start button.

    2. in the search box type devmgmt.msc, and then press ENTER.

    3. Select the network device and right click on it

    4. now, select Properties.

    5. in the Properties window, on the driver tab, click Update driver.

    6. After installing the updates, restart the computer.

    For more information visit http://windows.microsoft.com/en-US/windows-vista/Finding-drivers-What-to-do-when-your-hardware-wont-work-with-Windows-Vista

    To solve your problem, try to turn on network discovery. To do this follow the steps below:

    1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

    2. click on the chevron to expand the current network profile.

    3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    To learn more about this feature, please visit the below mentioned link:

    http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

    If the problem persists then I suggest you to reset the network adapter settings. Then follow the steps below

    To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

    http://support.Microsoft.com/kb/299357

    Disable the IP helpdesk:

    1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

    2. scroll down to the IP assistance service, right-click on it and select Properties

    3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

    4. then click on "Stop" to stop the service from running in the current session

    5. click on OK to exit the dialog box

    Disable IPv6:

    Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

    NOTE: You should do this for each network connection.

    Disable the DHCP broadcast flag: link: http://support.microsoft.com/default.aspx/kb/928233

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/322756

    (How to back up and restore the registry in Windows)

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

    To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

    1. Click Start, type regedit in the search box, and then click regedit in the list programs.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

    2. Locate and then click the following registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

    3. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.

    4. on the Edit menu, point to new, and then click DWORD (32-bit) value.

    5. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

    6 right-click DhcpConnEnableBcastFlagToggle, then click on modify.

    7. in the value data box, type 1 and then click OK.

    8. close the registry editor.

    By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

    Hope this information is useful.

    Let me know if it worked.

    Thank you, and in what concerns:

    Umesh P - Microsoft Support

    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

  • How could I give priority to my network connections, (without turning off the strap attached, as it took), so that it uses the internet from my main network connection?

    Prioritize network connections

    OK, here's the situation.
    I have a regular ethernet connection that provides me with a network and the internet.
    I have also a tablet PC which I attach to my PC so I can use it as a controller. (Not that it is important, but it's for a DAW/Midi controller)

    My problem is that whenever I place my tablet, PC starts by ignoring my normal connection and taking the internet from my Tablet (even when it is not connected to the internet). As a result, my internet is de-energized once I tie it, if I'm not as under the wifi on my tablet.

    My question is, how could I give priority to my network connections, (without turning off the strap attached, as it took), so that it uses the internet from my main network connection?

    Hello

    As well as the troubleshooting provided by Boumediene steps, you can also try the steps in this link. Some screenshots are also available on the link for a better understanding.

    http://www.howtogeek.com/HOWTO/27994/how-to-change-the-priority-of-wiredwireless-network-cards-in-Windows/

    Hope you will find this is useful.

  • "Unknown error" whenever I try to access the properties of the network connection

    Hi all

    whenever I try to access the properties of a network connection (e.g. via right click on 'Network'-> properties-> right click on a connection-> properties), type of connection according to what is, I get a message "Unknown error" box and I can't move forward.

    As a result, any setting of any network connection is not editable, more. For example, I wanted to force the IP of the local network of "assigned to DHCP" to "static" with an address fixed IP, but I can't.

    Another weird thing is that I even can't delete one of the existing network connections, even if there are a couple that are not in use for a long time...

    It should be noted that, apart from that, the network of connections work.

    What can cause this behavior, and that might be the way to solve the problem?

    I want to upgrade the system to SP3 but I am reluctant to take the plunge with such an "alive"... error
    As you may have already guessed, the system is running XP SP2.

    Thanks in advance,

    Concerning

    Yes, I am facing the same problem too. The error message says "an unexpected error has occurred." This problem started out with me a few weeks back and I was under the assumption that it was due to a virus attack. But even after a thorough cleaning session problem continues to exist.

    The problem - as mentioned above by the Bell, we can neither open the properties of a connection (i.e. Dial-up/LAN/WLAN), or remove or add a new connection. If you try to open the connection properties, all you get is the message "an unexpected error has occurred" and if you try to delete or add a connection - the system does not respond!

    Surely, this link worked for me. I hope it works for you Bell. Check it out.

    http://wdbuc.com/blog/2010/02/03/an-unexpected-error-occurred-when-you-right-click-on-a-network-connection-in-Windows-XP/

  • Problems connecting to the internet using the wireless network connection

    I can't connect to the internet using my wireless network connection. I had made the diagnosis and he stated that "the DHCP is not enabled for the wireless network connection. I had checked the DHCP, but it has been activated!... Someone would give any suggestion for me to solve the problem?

    Open the run command box by pressing Windows key + R, type services.msc and press enter . Search The Client DHCP and check if it is enabled or disabled. If disabled then turn it on and see if the problem still persists or not.

    Open the run command box by pressing Windows key + R, type cmd , and press enter . At the command prompt, type ipconfig/all and press ENTER. Now, check the IP address, default gateway, DNS etc. If you find all the information is correct, but you cannot yet access the Internet so if you connect the wireless network is secure or not. To determine the glance to the wireless network icon in the taskbar, then click on it. It will show you the available wireless networks. If there is a "yellow shield" present on the network icon, the network is not guaranteed, if there is no "yellow shield" does while the network is secure. In a secure network, you might have a "network security key. In this case try to disable the 'Network security key' option for this network. To do this:

    Open Control Panel , click network and Internet , click network and sharing Center , click manage wireless networks on the left.

    In the list select the wireless network and do a right click, select Properties, Security disable tab all options that is, in security type do not select no authentication (Open) and to the type of encryption , select none . You can also activate the automatic connection and SSID settings to further enhance connectivity, on the connection tab, click to select the "connect automatically if this network is in range " and "check boxesto connect even if the network is broadcasting his name (SSID) .

    For more information click here and see how you can determine whether a network is secure or not.

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure

    If the problem still persists, then check your firewall settings and make sure that the firewall is not blocking your Internet connection. Some software Antivirus has a built-in firewall and they block by default all unknown connection to the tightening of security.

    Try to restore Windows Firewall default settings. Open Control Panel click on network and Internet , click system and security , click Windows Firewall , click default settings .

    Hope this will help. Thank you.

    Arup Ratan Paul

  • Problems with NAT? Can't access internet from inside the network?

    I was intrigued with this problem for a few days now. I'm stuck on what could be the issue. The problem is that I can ping my router, G0/0 and G0/1, to the internet. However, since the switch and my PC, I can not ping Internet. I'm sure that everything is configured correctly, but here is my setup for the switch and the router:

    Router 1:

    version 15.1
    no service button
    horodateurs service debug datetime msec
    Log service timestamps datetime msec
    encryption password service
    !
    hostname LAN_Router_1
    !
    boot-start-marker
    boot-end-marker
    !
    !
    enable secret 5 *.
    !
    No aaa new-model
    !
    no location network-clock-participate 3
    !
    dot11 syslog
    no ip source route
    !
    IP cef
    !
    !
    !
    !
    domain IP MyTestLab.com
    8.8.8.8 IP name-server
    IP-server names 8.8.4.4
    No ipv6 cef
    !
    Authenticated MultiLink bundle-name Panel
    !
    !
    !
    !
    !
    voice-card 0
    !
    !
    !
    !
    !
    !
    !
    Crypto pki token removal timeout default 0
    !
    !
    !
    !
    license udi pid CISCO3845-MB sn FOC105013BA
    username * secret privilege 15 5 *.
    !
    redundancy
    !
    !
    property intellectual ssh time 60
    property intellectual ssh authentication-2 retries
    property intellectual ssh event logging
    property intellectual ssh version 2
    !
    !
    !
    !
    !
    !
    !
    !
    interface Loopback0
    192.168.254.1 IP 255.255.255.255
    !
    interface GigabitEthernet0/0
    DHCP IP address
    penetration of the IP stream
    stream IP output
    NAT outside IP
    IP virtual-reassembly in
    automatic duplex
    automatic speed
    media type rj45
    !
    interface GigabitEthernet0/1
    the IP 192.168.0.1 255.255.255.248
    penetration of the IP stream
    stream IP output
    IP nat inside
    IP virtual-reassembly in
    GLBP 100 ip 192.168.0.4
    priority GLBP 100 115
    GLBP 100 preempt
    automatic duplex
    automatic speed
    media type rj45
    !
    ospf Router 5
    router ID - 192.168.254.1
    network 192.168.0.1 0.0.0.0 area 1
    192.168.254.1 network 0.0.0.0 area 0
    !
    IP forward-Protocol ND
    no ip address of the http server
    no ip http secure server
    !
    !
    IP nat inside source list 10 interface GigabitEthernet0/0 overload
    IP route 0.0.0.0 0.0.0.0 dhcp
    !
    access-list 10 permit 192.168.94.32 0.0.0.15 connect
    access-list 10 permit 192.168.17.0 connect 0.0.0.7
    access-list 10 permit 192.168.52.0 connect 0.0.0.7


    access-list 10 permit 192.168.0.0 0.0.0.7 connect
    access-list 10 deny any newspaper
    !
    !
    !
    !
    !
    !
    control plan
    !
    !
    !
    !

    profile MGCP default
    !
    !
    !
    !
    !
    connection of the banner ^ C
    W A R N I N G

    THIS IS A PRIVATE COMPUTER SYSTEM.

    This computer system, including all related equipment, network devices
    (specifically including Internet access), are provided only for
    authorized used.

    All computer systems may be monitored for all lawful, including purpose
    to ensure that their use is authorized, for management of the system, to
    facilitate protection against unauthorized access, and to verify security
    survival and operational security procedures.

    Monitoring includes active attacks by authorized personnel and their
    entities to test or verify the security of the system. During the surveillance,.
    information may be examined, recorded, copied and used for authorized
    purposes.

    All information, including personal information, placed on or sent over
    This system may be monitored. Uses of this system, authorized or
    unauthorized, constitutes consent to monitoring of this system.

    Unauthorized use may subject you to criminal prosecution. Evidence of
    any unauthorized use collected during monitoring may be used for
    administrative, criminal or other adverse action. Use of this system
    constitutes a consent to monitoring for these purposes.
    ^ C
    !
    Line con 0
    Synchronous recording
    local connection
    line to 0
    line vty 0
    local connection
    entry ssh transport
    output transport ssh
    line vty 1 4
    opening of session
    transport of entry all
    !
    Scheduler allocate 20000 1000
    NTP 198.60.73.8 Server
    NTP 13.85.70.43 Server
    SaveRunConfig event manager applet
    cron cron-event timer entry ' 0 0 * * ".
    command action 1.0 cli 'enable '.
    cli 2.0 action command "RAM".

    Router 2:

    version 15.1
    horodateurs service debug datetime msec
    Log service timestamps datetime msec
    encryption password service
    !
    hostname LAN_Router_2
    !
    boot-start-marker
    boot-end-marker
    !
    !
    ! card order type necessary for slot 1
    Monitor logging warnings
    enable secret 5 *.
    !
    No aaa new-model
    !
    clock timezone CST - 5 0
    !
    dot11 syslog
    IP source-route
    !
    IP cef
    !
    !
    !
    !
    domain IP MyTestLab.com
    8.8.8.8 IP name-server
    IP-server names 8.8.4.4
    No ipv6 cef
    !
    Authenticated MultiLink bundle-name Panel
    !
    !
    !
    !
    type of parameter-card inspect global
    Select a dropped packet newspapers
    !
    voice-card 0
    !
    !
    !
    !
    !


    !
    !
    Crypto pki token removal timeout default 0
    !
    !
    !
    !
    license udi pid CISCO3845-MB sn FOC1411592J
    username * secret 5 *.

    !
    redundancy
    !
    !
    property intellectual ssh time 60
    property intellectual ssh authentication-2 retries
    property intellectual ssh event logging
    property intellectual ssh version 2
    !
    !
    !
    !
    !
    !
    !
    !
    interface Loopback0
    192.168.254.2 the IP 255.255.255.255
    !
    interface GigabitEthernet0/0
    DHCP IP address
    penetration of the IP stream
    stream IP output
    NAT outside IP
    IP virtual-reassembly in
    automatic duplex
    automatic speed
    media type rj45
    !
    interface GigabitEthernet0/1
    IP 192.168.0.2 255.255.255.248
    penetration of the IP stream
    stream IP output
    IP nat inside
    IP virtual-reassembly in
    GLBP 100 ip 192.168.0.4
    priority GLBP 100 110
    automatic duplex
    automatic speed
    media type rj45
    !
    ospf Router 5
    router ID - 192.168.254.2
    network 192.168.0.2 0.0.0.0 area 1
    0.0.0.0 network 192.168.254.2 area 0
    !
    Default IP gateway 192.168.0.1
    IP forward-Protocol ND
    no ip address of the http server
    no ip http secure server
    !
    !
    IP nat inside source list 10 interface GigabitEthernet0/0 overload
    IP route 0.0.0.0 0.0.0.0 dhcp
    !
    SSH extended IP access list
    permit tcp host 192.168.52.2 any eq 22 log
    permit tcp 192.168.10.0 0.0.0.255 any eq 22 log
    permit tcp host 192.168.17.18 any eq 22 log
    any eq 22 host tcp 192.168.0.1 newspaper permit
    permit tcp host 192.168.0.2 any eq 22 log
    permit tcp host 192.168.0.3 any eq 22 log
    permit tcp host 192.168.0.5 any eq 22 log
    denyip a session
    !
    access-list 10 permit 192.168.94.32 0.0.0.15 connect
    access-list 10 permit 192.168.17.0 connect 0.0.0.7
    access-list 10 permit 192.168.52.0 connect 0.0.0.7
    access-list 10 permit 192.168.0.0 0.0.0.7 connect
    access-list 10 deny any newspaper
    !
    !
    !
    !
    !
    !
    control plan
    !
    !
    !
    !
    profile MGCP default
    !
    !
    !
    !
    !
    connection of the banner ^ C
    W A R N I N G

    THIS IS A PRIVATE COMPUTER SYSTEM.

    This computer system, including all related equipment, network devices
    (specifically including Internet access), are provided only for
    authorized used.

    All computer systems may be monitored for all lawful, including purpose
    to ensure that their use is authorized, for management of the system, to
    facilitate protection against unauthorized access, and to verify security
    survival and operational security procedures.

    Monitoring includes active attacks by authorized personnel and their
    entities to test or verify the security of the system. During the surveillance,.
    information may be examined, recorded, copied and used for authorized
    purposes.

    All information, including personal information, placed on or sent over
    This system may be monitored. Uses of this system, authorized or
    unauthorized, constitutes consent to monitoring of this system.

    Unauthorized use may subject you to criminal prosecution. Evidence of
    any unauthorized use collected during monitoring may be used for
    administrative, criminal or other adverse action. Use of this system
    constitutes a consent to monitoring for these purposes.
    ^ C
    !
    Line con 0
    session-timeout 360
    exec-timeout 360 0
    7 password *.
    Synchronous recording
    local connection
    line to 0
    opening of session
    line vty 0 4
    SSH access class in
    Synchronous recording
    local connection
    entry ssh transport
    output transport ssh
    !
    Scheduler allocate 20000 1000
    NTP 198.60.73.8 Server
    NTP 13.85.70.43 Server
    SaveRunConfig event manager applet
    cron cron-event timer entry ' 0 0 * * ".
    command action 1.0 cli 'enable '.
    cli 2.0 action command "RAM".

    Switch:

    version 12.2
    no service button
    tcp KeepAlive-component snap-in service
    a tcp-KeepAlive-quick service
    horodateurs service debug uptime
    Log service timestamps uptime
    encryption password service
    !
    hostname LAN_Switch
    !
    boot-start-marker
    boot-end-marker
    !
    !
    username * secret privilege 15 5 *.
    !
    !
    !
    No aaa new-model
    clock timezone CST - 6
    1 supply ws-c3750-24ts switch
    mtu 1500 routing system
    IP routing
    IP - domain name MyTestLab.com
    8.8.8.8 IP name-server
    IP-server names 8.8.4.4
    !
    !
    !
    !
    !
    !
    !
    !
    !
    spanning tree mode rapid pvst
    spanning tree logging
    spanning tree extend id-system
    !
    internal allocation policy of VLAN ascendant
    !
    property intellectual ssh time 60
    property intellectual ssh authentication-2 retries
    property intellectual ssh event logging
    property intellectual ssh version 2
    !
    !
    interface Loopback0
    192.168.254.5 the IP 255.255.255.255
    !
    interface FastEthernet1/0/1
    switchport access vlan 17
    switchport mode access
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/2
    switchport access vlan 10
    switchport mode access
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/3
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/4
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard

    !
    interface FastEthernet1/0/5
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/6
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/7
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/8
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/9
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/10
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/11
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/12
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/13
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/14
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/15
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/16
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/17
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/18
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/19
    Description # PC #.
    switchport access vlan 10
    switchport mode access
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/20
    Description # X_BOX #.
    switchport access vlan 666
    switchport mode access
    Shutdown
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/21
    switchport access vlan 94
    switchport mode access
    spanning tree portfast
    spanning tree enable bpduguard
    !
    interface FastEthernet1/0/22
    switchport access vlan 5
    switchport mode access
    !
    interface FastEthernet1/0/23
    switchport access vlan 5
    switchport mode access
    !
    interface FastEthernet1/0/24
    switchport access vlan 5
    switchport mode access
    !
    GigabitEthernet1/0/1 interface
    switchport access vlan 666
    Shutdown
    !
    interface GigabitEthernet1/0/2
    switchport access vlan 666
    Shutdown
    !
    interface Vlan1
    no ip address
    Shutdown
    !
    interface Vlan5
    IP 192.168.0.5 255.255.255.248
    !
    interface Vlan10
    address 192.168.10.2 255.255.255.0
    !
    interface Vlan17
    IP 192.168.17.17 255.255.255.248
    !
    interface Vlan52
    IP 192.168.52.1 255.255.255.248
    !
    interface Vlan94
    IP 192.168.94.33 255.255.255.240
    !
    ospf Router 5
    router ID - 192.168.254.5
    Log-adjacency-changes
    network 192.168.0.5 0.0.0.0 area 1
    network 192.168.10.2 0.0.0.0 area 2
    network 192.168.17.17 0.0.0.0 area 2
    network 192.168.52.1 0.0.0.0 area 2
    network 192.168.94.33 0.0.0.0 area 2
    0.0.0.0 network 192.168.254.5 area 0
    !
    IP classless
    IP route 0.0.0.0 0.0.0.0 192.168.0.4 permanent
    no ip address of the http server
    no ip http secure server
    !
    !
    SSH_IN extended IP access list
    permit tcp host 192.168.52.2 any eq 22 log
    permit tcp 192.168.10.0 0.0.0.255 any eq 22 log
    permit tcp host 192.168.17.18 any eq 22 log
    any eq 22 host tcp 192.168.0.1 newspaper permit
    permit tcp host 192.168.0.2 any eq 22 log
    permit tcp host 192.168.0.3 any eq 22 log
    permit tcp host 192.168.0.5 any eq 22 log
    deny ip any any newspaper
    !
    !
    connection of the banner ^ C
    W A R N I N G
    THIS IS A PRIVATE COMPUTER SYSTEM.
    This computer system, including all related equipment, network devices
    (specifically including Internet access), are provided only for
    authorized used.
    All computer systems may be monitored for all lawful, including purpose
    to ensure that their use is authorized, for management of the system, to
    facilitate protection against unauthorized access, and to verify security
    survival and operational security procedures.
    Monitoring includes active attacks by authorized personnel and their
    entities to test or verify the security of the system. During the surveillance,.
    information may be examined, recorded, copied and used for authorized
    purposes.
    All information, including personal information, placed on or sent over
    This system may be monitored. Uses of this system, authorized or
    unauthorized, constitutes consent to monitoring of this system.
    Unauthorized use may subject you to criminal prosecution. Evidence of
    any unauthorized use collected during monitoring may be used for
    administrative, criminal or other adverse action. Use of this system
    constitutes a consent to monitoring for these purposes.
    ^ C
    !
    Line con 0
    session-timeout 60
    exec-timeout 60 0
    Synchronous recording
    local connection
    line vty 0
    access-class SSH_IN in
    local connection
    line vty 1 4
    access-class SSH_IN in
    opening of session
    line vty 5 15
    access-class SSH_IN in
    opening of session
    !
    NTP 198.60.73.8 Server
    Event Manager environment suspend_ports_config flash: / susp_ports.dat
    Event Manager environment suspend_ports_days 7
    Event Manager user Directorystrategie "flash: / policies /.
    Event manager session cli username "stw".
    political event manager sl_suspend_ports.tcl
    political event manager tm_suspend_ports.tcl
    SaveRunConfig event manager applet
    cron cron-event timer entry ' 0 0 * * ".
    command action 1.0 cli 'enable '.
    cli 2.0 action command "RAM".

    Well, I totally forgot the keyword "log" and NAT:

    Cisco IOS NAT support ACLs with a keyword "log"?

    A. When you configure Cisco IOS NAT translation dynamic NAT, an ACL is used to identify the packages that can be translated. The current NAT architecture does not support the ACL with a keyword "log".

    http://www.Cisco.com/c/en/us/support/docs/IP/network-address-translation...

    If your problem is not the mask with joker, but the command "log"...

  • mac address of a system changes with the network?

    I was using the dongle for the internet. in the cmd prompt, I typed ipconfig-all and it run thus:

    Windows IP configuration
    Name of the host...: C00L
    Primary Dns suffix...:
    Node... type: mixed
    Active... IP routing: No.
    Active... proxy WINS: No.
    PPP adapter rel:
    The connection-specific DNS suffix. :
    ... Description: rel
    Physical address.... :
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    IPv4 address...: 115.233.36.134 (Preferred)
    ... Subnet mask: 255.255.255.255
    ... Default gateway. : 0.0.0.0.
    DNS servers...: 220.226.6.104
    220.226.100.40
    Primary WINS server...: 10.11.12.13
    Secondary WINS server...: 10.11.12.14
    NetBIOS over TCP/IP...: disabled
    Wireless Network Connection 2 wireless LAN adapter:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft Virtual WiFi Miniport adapt
    Physical address.... : E0-2A-82-FB-76-72
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Wireless network connection Wireless LAN adapter:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Broadcom 4313 802.11b/g/n
    Physical address.... : E0-2A-82-FB-76-72
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Ethernet connection to the Local network card:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    Description...: Realtek PCIe FE Family Controller
    Physical address.... : 98-4B-E1-9D-4B-66
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Tunnel adapter isatap. {3BFC3875-9624-4568-AB0C-1B121CAC496C}:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft ISATAP adapter
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Tunnel adapter isatap. {3C55EFA0-2AD3-434C-9191-6CA183E5F21E}:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Adapter Microsoft ISATAP #2
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Card tunnel Teredo Tunneling Pseudo-Interface:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    Description...
    . : Teredo Tunneling Pseudo-Interface
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Gotta show the physical addresses of networks diff diff. Wat can b the actual physical address of the pc?

    Hello

    When you use the command ipconfig with the/All option, this will bring up an address or a list of different addresses depending on whether you have a multiple network connected to your PC. If your computer has multiple network cards, the physical address of each adapter is listed separately

    Find the "card Ethernet connection to the Local network," which is your physical address/MAC address of the computer.

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • Access Internet without IPv4 but Ipv6 connectivity is OK

    I bought a laptop with IE10 a Windows 8 installed. When I try to log into WiFi, Ipv4 access does not work but the Ipv6 access works.

    I can navigate only in a few pages.

    Hi Francisco,.
    Thanks for posting the question on Microsoft Community Forums.
    As we hear of publication description, Ipv4 does not work when connecting by Wifi.
    We will try to help you solve the problem.
     
    If you could answer a few questions that would help us resolve this problem:
    1. do you get an error message?
    2. you are on a domain network?
     
    Here are some steps that you can follow:
     
    Step 1: Clear the cache of DNS resolution.
    (a) move the mouse to the lower left corner of the screen and right click on the Start and selection
    "Command Prompt (Admin).
    (b) type ipconfig/flushdns, and then press ENTER.
     
    Step 2: Manually configure TCP/IP settings
    Follow the steps to reset TCP/IP.
    one) starts at the desktop view.
    (b) open the command prompt, right-click in the corner when the start window appears, select command prompt (admin).
    (c) at the command prompt, copy and paste (or type) the following command and then press ENTER:
    netsh int ip reset c:\resetlog.txt
    Note: If you do not specify a path of the directory for the log file, use the following command:
    netsh int ip reset resetlog.txt
    (d) restart the computer.
     
    You can read this article on the problems of network connection for assistance.
    http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-a-network

     
    Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

     

     
  • Problem with the network connection security

    When I try to view certain websites, I get an error message that says: "there is a problem with the security of your connection Metwork. In addition, a friend just sent me a copy of an e-mail that was sent to him. Apparently, someone must have hacked into my email account, has obtained my contact list, created an e-mail account using my name and sent e-mails to people on my contact list.

    How can I fix the problem with the warranty of my network connection, and what I can do on the pirate e-mail contacts list?

    Can you give an example of the websites that you see this 'error' on?

  • Wireless laptop running Vista 32 and wired desktop under Vista 64 can access Internet, but not each other!

    My laptop Vista 32 unreal access router and ping its own IP address, but no access to Vista 64-bit Wired Office with ping or try to access folders shared I place some months ago and used without problem until about 2 days ago. I recently did a restore of the laptop but it worked after that and I adjusted all the settings. I have Net bios over TCP/IP enabled on both machines. I have two machines on the workgroup and file sharing is enabled on both. Vista 64 desktop computer can access the Internet but can not access the shared folders that I put in this PC! He cannot ping the router either but can be accessed via the routers Web page. The router is configured correctly as well. I became a master browser errors on Vista 64 desktop until I changed the registry on the laptop off car with respect to the list of servers. I'm a computer technician with networking experience, but am confused on this one. There are so many problems over there near the mine, but they usually have xp machines trying to access Vista or vice-verse. In addition, they cannot access the Internet generally. If anyone out there has any intelligent suggestions I'm desperate, but know that I have this research completely so guess I did all the basic troubleshooting to save time you and me. Thanks in advance to anyone with advice!

    Rick Saunders

    12-09-2010

    Hey thanks for getting back to me, I wanted to let you know that I could solve the problem! I'm not sure excatly what the problem was, but I went and bought a fixed register a program so that I paid for, as you no doubt know the free just ruin your machine more than it is useful, well I ran that and restarted and BOOM! Now even if I can connect to each computer and the internet. I'm still not able to ping? Now when I say that this is not so much genral, the laptop I can ping any name of site Web and number but not the PC. On the PC I can ping its own IP address but not the router or laptop? But it has no bearing on anything so I anticipate leaving me well enough alone. I how ever to download a graphics professional ping program, but not to worried about it! Thank you so much for you help and if I need more help, I hope you are avalibale!

    Rick Saunders

    The coach of the computer, LLC

  • Time Capsule visitor files a network (associated with possible network connectivity)

    I have one Capsule of 3 TB I bought in early 2015.  I had a very frustrating problem from the beginning with her down my network, apparently at random.  I tried a lot of different things, and nothing worked, so I post to see if anyone else can help.

    The TC is plugged directly into my UVerse router/gateway via ethernet and I put the TC to have a static IP address.  The Uverse router firewall has a rule for the TC and TC shows how a router cascade in the rou UVerse.  I have wireless 2.4 GHz and 5 GHz when put in place on the TC.  I have a Mac Mini connected directly to it via ethernet, but it's a recent thing (maybe I was hoping that it would help).  I have also a PC attached to it for internet access only windows.  I have two Macs backup via Time Machine, well I tried to disable backups on one to see if that has had an effect (it didn't).  In fact, I have a whole list of notes on things I tried in the last two months, since I started to really tackle this problem seriously.  In particular, I've tried steps 1 to 5 in this link: Time Capsule constantly default to be recognized by Airport utility if I have not tried a factory reset.  I'm running the latest versions of OS X and iOS.

    The basic model is that I have the TC set up and work.  The wireless works fine.  Time Machine will back to it fine.  I can see the TC in the Finder.  I can open the AirPort on a Mac and iOS utility and it is 'green '.  All right.  Then, at a random time in the next few days (the longest one since I started to take notes is 7 days), the TC will drop from the network.  The without wire will be there and still works fine, but Time Machine will not be able to find it for backups, it will not be displayed in the Finder.  AirPort (iOS or Mac) utility shows a yellow triangle with an exclamation point and says that the device is no longer part of my network.  I have to unplug the TC and plug it back again so that he can return to the top.  As soon as I did that, everything will return to normal and be fine for a few days, and then he disappeared again.

    Tonight, however, I connected to another event.  I was watching something on my AppleTV when he started the buffering.  I grabbed my iPhone to see if my internet has declined.  More or less on a whim, I checked the airport utility and noticed that the TC showed a green dot but 'Internet' showed an orange dot.  A minute or two later, the AppleTV started playing video again, so I checked again airport utility and this 'Internet' time, has a green dot and the TC showed the usual brand yellow triangle / exclamation indicating it was abandoned.  I noted the time and then went back to look at what I had looked at.  About two hours later, I went to the power of the TC cycle and understand what to try next.

    The AppleTV is not connected to the CT.  It connects to the UVerse bridge (it is connected to the ethernet on the back of one of the set-top boxes UVerse).  This means that the loss of the internet was for everything in the House, not only the TC.  Something about the process seems to have caused the TC to drop from the network somehow, but everything remains recovered him very well.  Looking the UVerse bridge, it seems rebooting once since then (about an hour and a half after the TC dropped) but not by anyone in the House (I don't know if perhaps AT & T pushed something in the modem or if it is defective).

    So, no idea why loss of connectivity would cause the TC had to give up in the network?  Of course, it also appears, I may have a problem with the gateway Uverse, but if the TC goes down when everything is ok, it suggests a problem here as well.

    Since you seem to have picked up some things from my post...

    We will continue the process... This is where life becomes difficult. It is not uncommon to what you feel.

    Just to get the full picture.

    The TC is plugged directly into my UVerse router/gateway via ethernet and I put the TC to have a static IP address.

    I would prefer you to the TC using the bridge... using standard DHCP... (you can leave the Uverse for him apply a DHCP reservation).

    Once you do that... move the cable that connects the TC to the WAN Uverse on TC to the LAN port... It is fine in bridge...

    If it always falls I have a more serious way to do. It is much more complicated, however, because apple has removed all controls on sensitive router. But I think you will find that the WAN port is dubious on the TC. It can appear at different times and with different modems/routers...

    Alternatively, you can take the TC to Apple and have them replaced... It took me three goes to get a decent one. And I'm not even sure that the fault will not be displayed again in the near future out of warranty.

    But it could appear perfectly when Apple test it... and the replacement can be just as bad... in other words it is a deeper problem that Apple realize.

    Another thing tricky, I discovered.

    Airport routers stick to the local domain... even packed... they do not Pick-up area of the main router.

    This means that some devices will lose the connection because they are on the wrong field. It is possible to change the field on the Uverse make local as well... Since apple has not all the controls of the airport. I did some time ago on my main router and I can hardly give you direct evidence that helps... as many adjustments it is one of the many small things that are in addition to the lack of reliability that can help if you get the other 20 on the right. I think it helped...!

    From there on, we need to work a little more on maybe the ethernet connection... or the LAN port 100 Mbps gigabit Uverse? I think I'd rather see you adjust the speed of 100Mbps as long as your internet speed is less than that of course for gigabit.

    Give me some screenshots of the configuration... It is also useful.

  • How to change a unsecure network connection?

    My sister-in-law's computer connects to a wireless network that is not guaranteed... How to change t safe?  If I need to, with help, let me set up a new SECURE connection.  She scares me a little that she uses a non-secure network.

    Help, please...

    ~ Rosie ~.

    Because I'm not sure which router you have that's going to be quite general.

    Click Start, go in run, type "CMD" and in the command prompt, type "IPCONFIG" no citation.

    Find the address of a default gateway and enter this address in the address bar of your web browser. You will be asked to enter a user name and password. It is common that it is admin/admin, admin/password, admin/1234. After getting that distant and connected, an update so that we can better you go after knowledge that makes your router. If you happens to go there and feel comfortable going forward, look for the wireless settings tab and there should be a sub-category of security. Use WPA2-PSK, whatever you ask for password will be your new password in order to access your wireless network.

  • EA4500 restarts with wired network connections

    I use the EA4500 with Comcast internet and a cable modem from Motorola. As long as I only connect through the wireless network, the router works fine. This change when I connect devices to the rear ports. Now, immediately or in the next few hours the EA4500 begins to restart, even the wireless breaks down and the router light begins to blink a few times short and one long blink and so on.

    I tried cloning mac address different from all the different devices that I have in my network, but it's always the same result. Works wirelessly with isn't a problem, but as soon as something must be connected to the ports it will restart sooner rather than later.

    The EA4500 is just little more than a year and is used in a wardrobe of air conditioning.

    Anyone have any ideas?

    Don't mention it, JuergenH01! :-) I even think that I am part of society, but I'm not. :-D I'm just a loyal user of their devices. They never fail me, so in return I'll try to help others as well. You can continue to share here. :-)

  • Connect to the Internet through a wireless network connection

    I've just set up a new router/modem to Qwest (C1000A) and I have a problem of wireless internet connection on my laptop.  I have a Mini Dell PCI card 1390.  The laptop shows that I have excellent wireless connectivity.  Is there a setting I need to change to get my internet to stay connected? Thank you.

    Kris,

    This tweak, you should be able to do...

    Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

    Try running WinSock XP Fix

    Also try...

    How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

    Rick

  • How to get the text to change with each image in the slideshow base

    Hi, I'm putting the different positions and text on three different images. When I saw the text just remains the same.  I tried to change individually, but it doesn't seem to work. I took images in Photoshop and make all the same size with compensation for the text to be included later in the Muse. Then I loaded the three images in the slide show and thumbnail to bring the image before and at the Center. But regardless I the title and text appear unchanged, even if the changes to the image.  I don't know what to do with the image and text together in Photoshop would do anything for type resolution when it was introduced to the Muse.  Any ideas please.  I enclose the schema where I wish to address three different types of job seeker.slide problem.JPG

    Hi brush them... you have checked the title text on your widget option?... Try again with different slidshows which shows the option.so of text you can add the text you want in each image/trigger...sorry my English and I hope to help you

Maybe you are looking for

  • Cannot run due to an add-on Firefox,

    Hello! I was in builder.addons.mozilla.org and I was building my add-on. I saw the documentation and I opened the docs 'windows '. Then I saw a code, which closes the window and I wanted to try it. Then it closes the window..... I can't launch mozill

  • ACCOMMODATION OF AGE OF EMPIRES 2 THE CONQUERORS MULTIPLAYER GAMES

    How can I host multiplayer games in age of empires 2 the conquerors? I have no idea why no one can see my game I create when they enter my ip address. Please this is driving me crazy!

  • AC 97 cannot start code.10

    keep get AC97 cannot start code.10. visited mr fixit. updated the driver. summer on the internet. uninstalled several times. been in the bios to check if all audio is enabled. reupdated pilot.  Maybe the problem is that it is an e machine from Englan

  • Pavilion 17: screen resizes automatically when you type

    I tried to call HP and ask how to disable this feature, but they want me to pay a fee to obtain information, so I hope there, can someone help me. When I type, sometimes I guess that the edges of my flippers are not on the right unit makes display si

  • 71622 error code when you use read data from the encoder vi

    Hi, im using PXI7340 Motion control and I get the error-71622 code that is not defined if I try to search in the help explain error section. I get this error when I try to use reading encoder vi data. I would like to get the index data and I can not