to access the eprint from iphone problems

Similar Questions

• cannot access the internet from the desktop

  I am able to access the internet through the application of start page, but cannot access the internet from the desktop page. The convenience store has not detected a problem. Does not work via Wifi or wired broadband direct.

  Hello

  Are you using the right Internet Explorer?

  There are two more separate... From the start screen and another completely different for the office.

• Flash as2 cross subject to access the SWF from another server domain

  I have question cross-domain, how do I access the .swf from another swf file without using System.Security.allowDomain() in the swf file, which we are called.

  I use 2 domains and I have 2 files swf is a.com (a.swf) and another is of bcom (b.swf) I want to access the file the a.swf b.swf frames, if I use the system.Security.allowDomain() in b.swf file I can access executives. But without using this way I can access the file from another domain.

  Because I have a risk to change the file b.swf so I vant to go without changing the file b.swf is any other wey to access frames of the file the file a.swf b.swf. Please someone help me solve this problem.

  use a local executable (such as php) to load the b.swf and send it back to a.swf.  for example:

  loadSWF.php:

  <>

  $fh = fopen ("www.b.com/b.swf", "r");

  Header ("Content-type: application/x-shockwave-flash");

  fpassthru ($FH);

  ?>

  a.fla:

  var target_mc:MovieClip=this.createEmptyMovieClip("target_mc",this.getNextHighestDepth());

  target_mc.loadMovie ("loadSWF.php");

• To access the files from the computers on the same network.

  We recently bought two Macs and an airport Time Capsule as we were told that it would allow us to access the files from one computer to another. Run us a business out of our home and require both Mac to be able to access the files from each other or have at least a common location to save etc. Both Mac is put back up automatically and lift you under the "Shared" section of the Finder. The airport shows also here as well. I don't understand how to get this to work so that I can share files easily. Any help would be appreciated.

  Open the system preferences sharing pane, start sharing files if necessary, and then use the connection to the server command in the Finder menu go.

  (142670)

• To access the data from database to a remote computer

  Hi all

  Can someone tell me how to access data from a database, sitting on another computer? I use the Sqlite database. It works fine in my computer. But I don't know hoe to put the database in another computer (server) and access the data from there. In my program, it is essential to do this for a simultaneous use for different users. Someone please help.

  Kind regards

  Cindy.

  I found the solution... http://ConnectionStrings.com/

• Outlook Express has stopped to let me access the internet from an e-mail.

  Outlook express

  A week ago, Outlook Express stopped allowing me to access the internet from an e-mail.  If someone sends you an e-mail with a WEB address, that it does not connect to it just says connection.  Could not find a way to fix this.  If anyone can help.  Thank you

  Hyperlinks do not work in Outlook Express or in Word (revised 29-Apr-09)
  http://support.Microsoft.com/kb/823301

  Hyperlinks do not work in Outlook Express after you put upgraded to IE7 [or IE8] (revised 29-Apr-09)
  http://support.Microsoft.com/kb/929867

  If still no joy:

  With the permission of MVP Frank Saunders. [RIP]

  If nothing happens when you click on a link:
  Open Windows Explorer or on the control panel.
  Go to tools | Folder options | Types of files.
  Scroll to [NONE] URL: HyperText Transfer Protocol (NOT the shortcut URL: Internet) and select it.
  Click Edit or advanced, depending on your version of Windows.
  Choose 'open '.
  Click on change.

  "Application used to perform action" should read:

  "C:\PROGRAM may EXPLORER\iexplore.exe" - nohome (check the path to)
  Iexplore.exe to ensure that it is correct and use the double quotes).

  DDE should be checked and in the boxes below, you should have:

  #1:
  « %1 »,,-1,0,,,
  #2
  IExplore
  #3 (white)

  #4
  WWW_OpenURL

  Protocol URL: HyperText Transfer with Privacy should be the same.

  If the foregoing is correct, uncheck the box: use DDE.
  

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• Can I access the guest from the server OS (virtual machine)?

  Hi all

  Can I access the guest from the server OS (virtual machine)? I mean, I would also like to start and discovers a guest OS (VM) directly in the server as in VMware Server 2.0. I would also like to see the graphic on the server management console to manage virtual machines.

  Or do I always have at least two computers? For example, the server ESXi without GUI / frontend access and the client with vCenter, vInfrastructure, blah-blah-blah,...?

  Thanks for the replies!

  Best regards

  Joao Araujo

  You will need the Client or another tool for access (RDP, SSH) a machine separate. ESXi is a very tiny BONES.

• How do you set up the email in the ePrint for iPhone app?

  I just bought a printer HP Laserjet Pro 400 model 401DN.  I recorded the printer with the HP ePrint Center and I created an ePrint address.  The printer is connected to an Ethernet cable to a cable system in my house.

  Can my first question - I use the iPhone app from HP ePrint to print items of the 401DN printer?  I think I can.

  I installed the HP ePrint app on my iPhone 5.  App instructions say I can print the body of the email to the iPhone.  To do this, I think I need to go into the settings app - e-mail accounts - others.  I tried to use IMAP.  In the e-mail address field email address am supposed to use?  My primary e-mail address I use to send and receive all of my mail?  I am suppose to enter incoming or outgoing server information?  I was not able to find any documentation on how to configure the e-mail of the ePrint iPhone app part.

  I tried to configure e-mail using my gmail account and it worked and checked correctly.  I can't figure out how to set e-mail using my main email account.

  I tried to sign up information I think the soft looking and check fails.

  Thanks for your help!

  artmanphoto,

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a printer. You can do so at http://h30499.www3.hp.com/hpeb/ .
  
  I hope this helps.

• Can't access the files from the HARD drive of any account on the windows computer 7

  Hello

  When I tried to connect my Western digital external hard drive to a 32-bit desktop P 3 with a Windows XP SP1, then this HARD drive is not detected. Then I tried to copy his WD driver ITS a USB Flash drive, then isntalled all the WD HARD drive was always plugged into my computer. After that, the HARD drive was identified by computer and appear in my computer. As I thought that this folder has been created by the installation of the driver, did not exist on my HARD drive before connected to the desktop computer.

  When I plugged my WD HDDagain to my laptop HP with Windows 7 SP1 64 bit and I tried open this folder, and then the main folder only opened without facing access denied, however, access to all of its subfolders, and the files inside it has been declined.

  In addition, althoguh the username admin Curernet "Mohammad" can open the folder of human "83f04ce083fb03083bb88e50", as shown in the screenshot above, it can not access all of the subfolders, files in the main folder, and to access, I will need to use the scecurity tab. Thus, it would be absolute nonsense, if I want to have access to all of the subfolders, I will need to use the security for each tab.

  How do I gain access to all of the subfolders with use of the Security tab once the time (i.e. as long as all subfolders are inside the main folder, then simply use the main folder security tab?

  

  As long as the current username "Mohammad" can open the folder of "83f04ce083fb03083bb88e50" man, "Mohammad" is so allowed system to have access to the main folder as shown in the screenshot above, then I think that the username 'Mohammad' will have to reach all subfolders as well. However, when you try to open any subfolder or file, then the current user 'Mohammad' name could not have access to all of the subfolders in the main folder and all subfolders or files opening gave me this error below (screenshots below)

  

  

  I tried to remove this main folder, however, each time, I found myself with a loop "you need permission SYSTEM to make changes to this file.

  

  Original title: file access denied

  Groan.  It is so easy to fix, and you should have gotten a lot better support now.  Surprisingly, the worst suggestion came directly from the "Microsoft Support Engineer" Reda Singh, his suggestion potentially compromising the security of your computer while doing absolutely nothing to solve the problem.  Fortunately, it seems like you didn't do something quite right and so the script was not run.

  First of all, let me explain why this difficult access occurs in the first place.  Originally, you had three 'users' granted access to training, SYSTEM, Administrators, and Mohammad.  SYSTEM allows Windows to read your disk, and retrieve things like its label.  It can also allow your antivirus software to access the drive.  Because this OPTION is enabled, Administrators is not accomplish anything, even if you are an administrator.  As long as this OPTION is enabled, this permission only works for programs, that you manually raised to run as administrator.  This leaves access to the drive depend on the last entry, Mohammad.  The problem is the SID behind Mohammad is only good on the computer, it was created, so if you connect this HARD drive on another computer, no access is allowed!  Enter the security on the other computer dialog box, you can either see something "could not read permissions" or you will see the SYSTEM, directorsand a third entry with a long series of numbers.  It's your first computer Mohammad , and it will not work on another computer.

  It is not surprising that you're facing this problem because you are using the drive on multiple computers, which is running XP that is not UAC.  Here's how to unlock a storage drive (in Windows 7) so that it can be normally accessed in any PC without any permissions problem:

  1. Press [Windows] (or click on the circles to start), and then type "user account control".
  2. In the search results, click on "change user account control settings."
  3. Drag the slider to "never notify".
  4. Click [OK] to confirm the changes and restart your computer.
  5. Open Windows Explorer, right-click on the affected drive, and then click Properties -> Security (tab)-> [Advanced]-> owner (tab)-> [change].
  6. You should be on a dialog box that asks what you want to change the owner.  Click on Administrators.
  7. Check Replace owner of subcontainers and objects, and click [OK].  Windows should start processing all the files on the disc.  This may take a few minutes.
  8. When it's done, click [OK] to close the property message and then close out of all other dialog boxes.
  9. In Windows Explorer, click the drive affected again, and then click Properties -> Security (tab)-> [Advanced]-> [edit permissions].
  10. Now in the dialog box Advanced security settings , click the button [delete] repeatedly to remove all permission entries.
  11. Add SYSTEM and grant full control.
      1. Click on [Add...].
      2. Type 'SYSTEM' and press [Enter].
      3. Check full control in the allow column and press [Enter].
  12. Add Administrators and grant full control.
  13. Add users and grant Full control.
  14. In the dialog box Advanced security settings , you should have three entrances of permissions: SYSTEM Administratorsand users, all granted full control.  Check "Replace all permissions of child object with permissions inheritable from this object" and click [OK].
  15. Click [Yes] to confirm the replacement of permissions.  Again, Windows start to process all files on the disk, which may take a few minutes.
  16. When he finishes, close to all the dialog boxes and check that all records are now accessible.  You may have to refresh (or close and reopen) explore to see the changes.
  17. Assuming that it worked, we will re-enable UAC to reduce the vulnerability of temporary security, that we created earlier.  Press [Windows] and then type 'user account control '.
  18. In the search results, click on "change user account control settings."
  19. Drag the slider to the position below the top (position #2, by default).
  20. Click [OK] and restart your computer.  Now, the files remain accessible.

  This should straighten the permissions of your disk storage so that you can use it again.  You may need to empty the trash on this drive after changing permissions.

  Don't do this procedure on your C:\ drive, it will seriously reduce the security of your Windows installation.  This is for the readers of storage only.  If you need access to a specific file that you created to C:\, you can safely do the steps above on this issue, but never on the C:\ drive itself.  Please note that when you perform this procedure on a folder instead of a hard drive, you will need to replace this step #10:

  10. now in the dialog box Advanced security settings , uncheck the box "Include permissions can be inherited from the parent to this object" and click [delete] to confirm.  If some permission entries remain, click [Remove] until they are all gone.

  The concept is the same in Windows Vista, even if the exact steps differ from the foregoing at least Windows 8.  In Windows 8, you must also disable UAC with a registry tweak because, unlike Windows 7, UAC remains on even when the value of "Never notify", giving rise to all sorts of problems in Explorer tries to work with file permissions.

  Oh and to answer one other question I saw you ask from the beginning: this folder of the .net Framework was created by .net Framework Installer.  He breaks all the rules and frustrating unpacks his junk everywhere where it feels like.  I got it decompress on a front SD card, making the installation would take forever.  After installing the .net Framework, you probably disconnected the drive before restarting your computer, so these files let me.  Or the installation crashed and started you again.  Meanwhile, installs the failure left its Temp files behind.  It was supposed to remove the folder when the installation is complete.  You can remove safely as the folder manually.

• To access the values from the row outside the ListView ListItem

  Hello

  I spent two hours browsing the forums and documentation with no chance of finding a solution on how to access the list item data from outside the listview.

  Let explain me my code. It is marked with I work and what does not work and its expected behavior.

  Should work behavior

  
  Tapping & getting data
  

  The arrayDataModel is filled with 4 rows. Firstly the list item, second item in the list... etc.

  • Tapping on the order of the day, label with the id of triggeredText displays the value of a threaded list item.
  • The index of the tapped icon appears in the label with the id of triggerredIndex.

  Incrementing Index using ActionItems onBar

  By pressing action items 'previous' and 'next', you can increment the index value to the label with the id of triggeredIndex. The order of the index is 0-4, even as total of the items in the list.

  How to extract data from the index when the value of triggeredIndex?

  Buttons

  The buttons at the bottom of the screen... Select 1, select the 2nd, 3rd Select should select indexes 0,1,2 of the list and display the value in triggeredText and triggeredIndex. They do not work.

  How did I pull the values when you click the buttons?

  import bb.cascades 1.3
  
  TabbedPane {
      id: root
      showTabsOnActionBar: false
  
      Tab {
          id: mainTab
          title: "Test List"
              Page {
                  id: mainPage
                  titleBar: TitleBar {
                      title: "List Traversal Test"
                  }
                  actions: [
                      ActionItem {
                          title: "Previous"
                          ActionBar.placement: ActionBarPlacement.OnBar
                          onTriggered: {
                              // get current selected index from list=
                              var currentIndex = parseInt(triggeredIndex.text);
  
                              if(currentIndex <= 0){
                                  //do nothing already at first item
                              }else{
                                  // subtract 1 from index ( ci - 1) ?
                                  var newIndex = parseInt(triggeredIndex.text) - 1;
  
                                  // show data from new selected index
                                  // ???
  
                                  // triggeredItem.text = XXX // the data
                                  // ???
  
                                  // triggeredIndex.text = X // the current index
                                  triggeredIndex.text = newIndex;
                              }
                          }
                      },
                      ActionItem {
                          title: "Next"
                          ActionBar.placement: ActionBarPlacement.OnBar
                          onTriggered: {
                              // get current selected index from list=
                              var currentIndex = parseInt(triggeredIndex.text);
  
                              if(currentIndex == 4){
                                  //do nothing already at lastitem
                              }else{
                              // add 1 to index ( ci + 1) ?
                              var newIndex = parseInt(triggeredIndex.text) + 1
  
                              // show data from new selected index
                              // ???
  
                              // triggeredItem.text = XXX // the data
                              // ???
  
                              // triggeredIndex.text = X // the current index
                              triggeredIndex.text = newIndex;
                          }
                          }
                      },
                      ActionItem {
                          title: "Clear"
                          ActionBar.placement: ActionBarPlacement.OnBar
                          onTriggered: {
                              // set current index to 0 (top item in list)
                          }
                      }
  
                  ]
                  Container {
                      preferredHeight: maxHeight
                      layout: StackLayout {
                          orientation: LayoutOrientation.TopToBottom
                      }
  
                      Label{
                          id: triggeredItem      // value of listitem from current index
                          text: "0"
                      }
                      Label{
                          id: triggeredIndex    // current index
                          text: "0"
                          onTextChanged: {
                              // set triggeredItem.text to contents of selected ListItem with same index
                              // STUCK HERE cannot access ListItem.dataModel(indexPath) from here....
                          }
  
                      }
                      Container{
                          ListView {
  
                              id: theList
                              objectName: "dalist"
                              dataModel: ArrayDataModel {
                                  id: theListModel
                              }
                              listItemComponents: ListItemComponent {
                                  StandardListItem {
                                      id: itemRoot
                                      title: ListItemData
                                  }
  
                              }
                              onTriggered: {
                                  var si = dataModel.data(indexPath);
                                  triggeredItem.text = "LIST ITEM CONTENT: " + si;  //set content when user taps on item
                                  triggeredIndex.text = "LIST ITEM INDEX INDEX: " + indexPath;  // set index when user taps
                              }
  
                              onSelectionChanged: {
                                  //console.log(selected);
                              }
  
                              onCreationCompleted: {
  
                                  //add some data to the listview
                                  theListModel.append("First List Item");
                                  theListModel.append("Second List Item");
                                  theListModel.append("Third List Item");
                                  theListModel.append("Fourth List Item");
                              }
                          }
  
                      }
                      Container{
                          layout: StackLayout {
                              orientation: LayoutOrientation.LeftToRight
                          }
                      Button{
                          text: "Select 1st"
                          onClicked: {
                              theList.clearSelection();
                              theList.select(0);
  
                          }
                      }
                      Button{
                          text: "Select 2nd"
                          onClicked: {
                              theList.clearSelection();
                              theList.select(1);
  
                          }
                      }
  
                      Button{
                          text: "Select 3rd item"
                          onClicked: {
  
                              //expected behaviour is to show data from Third List Item
  
                              // triggeredIndex.text = INDEX 3
                              // triggeredText.text = (DATA FROM THIRD LIST ITEM)
  
                              // THIS IS NOT WORKING ....
                              theList.clearSelection();
                              theList.select(2);
                              console.log(theList.dataModel(3));
                              triggeredItem.text = theListModel.dataModel(3);
  
                          }
                      }
                  }
                 }
              }
          }//tab
  }
  

  Thank you and have a happy and healthy 2015!

  Your help will be greatly appreciated.

  I ran and got this:

  asset:///main.qml:161: TypeError: Result of expression 'theList.dataModel' [bb::cascades::ArrayDataModel(0x1091a838)] is not a function.
  

  But it works

  theListModel.data([3])
  

  But this isn't the solution, you have a more serious problem. You select a value, you trigger. If you add this in onTriggered you select it (and you can see that it changes color when it is selected).

  theList.select(indexPath);
  

  If you want to use option to deselect

  theList.select(indexPath, !theList.isSelected(indexPath));
  

  And if you want to have that one chose this

  theList.clearSelection();
  theList.select(indexPath);
  

  Inside the button 'Select the 3rd point' allows to select programmatically

  theList.select([2]);
  

  It works but I'm not sure what you're trying to do

• Error 1606.Could access the network location. Problem installing driver scanner.

  I tried to install the drivers for a more BearPaw 2448TA scanner in the edition of Windows 7 Home Premium (64-bit).

  Recently, a message appeared in the center of the Action to say that a new driver of Mustek systems was available, I downloaded and tried to install.

  A messagebox is displayed during the installation with the following message
  "Error 1606.Could not access network location------." and the installation will fail.

  Help would be greatly appreciated.

  Hi HenryGib121,

  Thank you for using the Microsoft Answers forums.
   
  I suggest you to download and install the driver from the link below.
  http://www.mustek.com/Mustek/support.php
   
  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry.

  If the problem persists try the steps and check them off below.

  You can create a system restore before trying the steps below in order to be on the safer side.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Here are the steps to fix it.
  1. click on start, run, type regedit in the Open box, and then click OK.
  2. look for the following registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\
  3 remove the entries that show the path that is listed in the error message.

  If the steps above did not resolve your problem, then you can try to create a new user account and check.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  http://support.Microsoft.com/kb/811151 (this article is for xp, but can also be used for vista and windows 7)

  You can also contact the mustek support team for help.
  http://www.mustek.com.tw/support/
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Unable to access the files from Windows 7 computer to Windows 8

  Hello

  I have Word 2007 on two computers, and each has Windows 7 or 8.  I'm trying to share with homegroup.  My goal is to keep my documents on Windows 7 system and access the files (read and edit) the system of Windows 8. I don't want multiple documents, I want just one version.

  After you open the docx Word read-only, I did some research and discovered that if I go to the file on the computer with Win7, made a right click on the file, then select residential group read/write, I would then be able to access the computer of Win8 file and edit and save it.  I was able to do this.

  OT: Word 2007 ReadOnly

  To make sure that I could continue to do so, I tried again (by selecting the docx on the Win7 system since the system of Win8).  I received one copy read the second time.  What should I do to edit and save the Win8 computer capabilities, without having to physically run to the Win7 to allow access?

  Thank you

  Hello

  Thanks for posting your question in the Microsoft Community.

  The description above, you want to computer Windows 7 to Windows 8. I'll be happy to help you on this question.

  This problem may occur if the file share on the computer are not correctly enabled. I suggest you try the steps from the following links:

  Share files and folders on a network or shared PC
  http://Windows.Microsoft.com/en-in/Windows-8/share-files-folders

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Share files via public folders
  http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• How to configure the VPN LAN to access the internet from the remote network

  I have set up for our project site to another Office VPN. Please join.
  Now I have already configured Site to site vpn between ASA 5510 and 1841 router.

  HQ LAN

  Branch of the LAN
                   10.2.1.0/24 > ASA 5510 1841 > > INTERNET < 1841=""> <> 10.30.3.0/24
  ^
  ^
  ^
  ^
  Call Manager
  No. 2851
  Now access from branch LAN LAN of HQ each other.

  I face problems that are
  (1) in the direction of LAN, they can access HQ LAN & resource, but cannot access the internet. I did not configure NAT on the router PH
  (2) can I access internet BRANCH LAN via HQ LAN INTERNET. Where can I access the Internet of general management of the LAN of the PH router directly while access to the VPN to the local network of HQ?
  (3) in the Site of the Directorate, phone hard cannot work but phone on PC can call to Headquarters. Hard IP phone are same in remote network (172.16.1.0/24 ). What's the problem? How can I configure separately?

  Please give advise me how should I do.

  Hello

  (1) in the direction of LAN, they can access HQ LAN & resource, but cannot access the internet. I did not configure NAT on the router PH

  Answer:

  You must configure the NAT and crossed to the ASA HQ so that the VPN branch router provides LAN and u-Turn, access to Internet of the SAA.  You must first seup NAT for the branch on the SAA router subnet, then you must type the command:

  permit same-security-traffic intra-interface

  Here's a great example for VPN client hairpining.

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  (2) can I access internet BRANCH LAN via HQ LAN INTERNET. Where can I access the Internet of general management of the LAN of the PH router directly while access to the VPN to the local network of HQ?

  Yes, you can

  (3) in the Site of the Directorate, phone hard cannot work but phone on PC can call to Headquarters. Hard IP phone are same in remote network (172.16.1.0/24 ). What's the problem? How can I configure separately?

  You must change your subnet VLANS to be different from the subnet HQ voice phone IP VOice VLAn, it should be fine.

  Kind regards

  Mohamed

• ADF Mobile: Error when accessing the app from the Android emulator

  I am trying to build a mobile app ADF with JDeveloper (11.1.2.4.0) and its extension ADF Mobile Framework (11.1.2.4.39.64.69). The version of the Android API is 23 and the SDK build tools and platform version 20.

  I built the app and the deployment of the android emulator has been a success, but when I try to access the application on the emulator, it throws an error indicating that the application has stopped working.

  When I check logcat he showed the exception stack trace below that throws an UnsupportedOperationException

  Any help would be really appreciated.

  I/ActivityManager( 1240): Start proc com.company.OracleMobile for activity com.company.OracleMobile/oracle.adfmf.Container: pid=1782 uid=10019 gids={50019, 1028, 1015, 3003}
  D/WearableConn( 1443): Connecting via TCP to /10.0.2.2:5601
  W/System.err( 1782): No properties file. Taking properties from ClassLoader resources
  D/dalvikvm( 1782): GC_CONCURRENT freed 152K, 12% free 2199K/2476K, paused 9ms+9ms, total 50ms
  D/dalvikvm( 1782): GC_CONCURRENT freed 119K, 10% free 2491K/2740K, paused 13ms+10ms, total 44ms
  W/System.err( 1782): Opening "logging.properties" also failed
  W/System.err( 1782): java.io.IOException: BufferedInputStream is closed
  D/dalvikvm( 1782): GC_FOR_ALLOC freed 168K, 12% free 2542K/2884K, paused 14ms, total 15ms
  I/dalvikvm-heap( 1782): Grow heap (frag case) to 4.062MB for 1536012-byte allocation
  D/dalvikvm( 1782): GC_CONCURRENT freed <1K, 8% free 4041K/4388K, paused 9ms+1ms, total 32ms
  E/WebViewFactory( 1782): Chromium WebView does not exist
  E/WebViewFactory( 1782): Chromium WebView does not exist
  D/gralloc_goldfish( 1782): Emulator without GPU emulation detected.
  I/ActivityManager( 1240): Displayed com.company.OracleMobile/oracle.adfmf.Container: +1s55ms
  I/Choreographer( 1240): Skipped 33 frames!  The application may be doing too much work on its main thread.
  D/dalvikvm( 1782): GC_CONCURRENT freed 189K, 7% free 4453K/4768K, paused 17ms+17ms, total 90ms
  I/Choreographer( 1240): Skipped 96 frames!  The application may be doing too much work on its main thread.
  I/Choreographer( 1240): Skipped 122 frames!  The application may be doing too much work on its main thread.
  I/Choreographer( 1240): Skipped 202 frames!  The application may be doing too much work on its main thread.
  D/dalvikvm( 1782): GC_FOR_ALLOC freed 376K, 10% free 4746K/5268K, paused 15ms, total 16ms
  D/dalvikvm( 1782): GC_FOR_ALLOC freed 495K, 14% free 4944K/5724K, paused 14ms, total 15ms
  D/dalvikvm( 1782): GC_CONCURRENT freed 507K, 11% free 5335K/5964K, paused 16ms+16ms, total 58ms
  D/dalvikvm( 1782): GC_CONCURRENT freed 287K, 7% free 6075K/6484K, paused 18ms+11ms, total 61ms
  D/dalvikvm( 1782): GC_CONCURRENT freed 596K, 10% free 6755K/7472K, paused 17ms+9ms, total 61ms
  W/dalvikvm( 1782): Exception Ljava/lang/UnsatisfiedLinkError; thrown while initializing Lcom/oracle/cvm/channel/VM;
  W/System.err( 1782): java.lang.reflect.InvocationTargetException
  W/System.err( 1782):  at java.lang.reflect.Constructor.constructNative(Native Method)
  W/System.err( 1782):  at java.lang.reflect.Constructor.newInstance(Constructor.java:423)
  W/System.err( 1782):  at oracle.adfmf.framework.FeatureContextManagerFactory.createFeatureContextManager(FeatureContextManagerFactory.java:37)
  W/System.err( 1782):  at oracle.adfmf.framework.FeatureContextManagerFactory.getInstance(FeatureContextManagerFactory.java:72)
  W/System.err( 1782):  at oracle.adfmf.Application.initializeFeatureContextManager(Application.java:328)
  W/System.err( 1782):  at oracle.adfmf.Application.initApplication(Application.java:298)
  W/System.err( 1782):  at oracle.adfmf.Container$LayoutLoader.resumeApplicationLoad(Container.java:865)
  W/System.err( 1782):  at oracle.adfmf.Container$LayoutLoader.run(Container.java:786)
  W/System.err( 1782):  at android.os.Handler.handleCallback(Handler.java:733)
  W/System.err( 1782):  at android.os.Handler.dispatchMessage(Handler.java:95)
  W/System.err( 1782):  at android.os.Looper.loop(Looper.java:136)
  W/System.err( 1782):  at android.app.ActivityThread.main(ActivityThread.java:5026)
  W/System.err( 1782):  at java.lang.reflect.Method.invokeNative(Native Method)
  W/System.err( 1782):  at java.lang.reflect.Method.invoke(Method.java:515)
  W/System.err( 1782):  at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:777)
  W/System.err( 1782):  at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:602)
  W/System.err( 1782):  at dalvik.system.NativeStart.main(Native Method)
  W/System.err( 1782): Caused by: java.lang.UnsatisfiedLinkError: Couldn't load cvm from loader dalvik.system.PathClassLoader[DexPathList[[zip file "/data/app/com.company.OracleMobile-1.apk"],nativeLibraryDirectories=[/data/app-lib/com.company.OracleMobile-1, /system/lib]]]: findLibrary returned null
  W/System.err( 1782):  at java.lang.Runtime.loadLibrary(Runtime.java:358)
  W/System.err( 1782):  at java.lang.System.loadLibrary(System.java:588)
  W/System.err( 1782):  at com.oracle.cvm.channel.VM.<clinit>(Unknown Source)
  W/System.err( 1782):  at oracle.adfmf.JavaStarter.startJVMWithFeatureClasspaths(JavaStarter.java:351)
  W/System.err( 1782):  at oracle.adfmf.JavaStarter.startJava(JavaStarter.java:65)
  W/System.err( 1782):  at oracle.adfmf.framework.NativeFeatureContextManager.<init>(NativeFeatureContextManager.java:113)
  W/System.err( 1782):  ... 17 more
  D/dalvikvm( 1782): GC_CONCURRENT freed 1574K, 21% free 6714K/8416K, paused 15ms+18ms, total 81ms
  W/ActivityManager( 1240): Bad activity token: android.os.BinderProxy@b22d6f30
  W/ActivityManager( 1240): java.lang.ClassCastException: android.os.BinderProxy cannot be cast to com.android.server.am.ActivityRecord$Token
  W/ActivityManager( 1240):  at com.android.server.am.ActivityRecord.forToken(ActivityRecord.java:338)
  W/ActivityManager( 1240):  at com.android.server.am.ActivityRecord.isInStackLocked(ActivityRecord.java:1031)
  W/ActivityManager( 1240):  at com.android.server.am.ActivityRecord.getStackLocked(ActivityRecord.java:1039)
  W/ActivityManager( 1240):  at com.android.server.am.ActivityManagerService.getEnclosingActivityContainer(ActivityManagerService.java:7101)
  W/ActivityManager( 1240):  at android.app.ActivityManagerNative.onTransact(ActivityManagerNative.java:2026)
  W/ActivityManager( 1240):  at com.android.server.am.ActivityManagerService.onTransact(ActivityManagerService.java:2023)
  W/ActivityManager( 1240):  at android.os.Binder.execTransact(Binder.java:404)
  W/ActivityManager( 1240):  at dalvik.system.NativeStart.run(Native Method)
  W/ActivityManager( 1240): Bad activity token: android.os.BinderProxy@b22f2490
  W/ActivityManager( 1240): java.lang.ClassCastException: android.os.BinderProxy cannot be cast to com.android.server.am.ActivityRecord$Token
  W/ActivityManager( 1240):  at com.android.server.am.ActivityRecord.forToken(ActivityRecord.java:338)
  W/ActivityManager( 1240):  at com.android.server.am.ActivityRecord.isInStackLocked(ActivityRecord.java:1031)
  W/ActivityManager( 1240):  at com.android.server.am.ActivityRecord.getStackLocked(ActivityRecord.java:1039)
  W/ActivityManager( 1240):  at com.android.server.am.ActivityManagerService.getEnclosingActivityContainer(ActivityManagerService.java:7101)
  W/ActivityManager( 1240):  at android.app.ActivityManagerNative.onTransact(ActivityManagerNative.java:2026)
  W/ActivityManager( 1240):  at com.android.server.am.ActivityManagerService.onTransact(ActivityManagerService.java:2023)
  W/ActivityManager( 1240):  at android.os.Binder.execTransact(Binder.java:404)
  W/ActivityManager( 1240):  at dalvik.system.NativeStart.run(Native Method)
  D/AndroidRuntime( 1782): Shutting down VM
  W/dalvikvm( 1782): threadid=1: thread exiting with uncaught exception (group=0xb1d31ce8)
  E/AndroidRuntime( 1782): FATAL EXCEPTION: main
  E/AndroidRuntime( 1782): Process: com.company.OracleMobile, PID: 1782
  E/AndroidRuntime( 1782): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.company.OracleMobile/oracle.adfmf.LocalHTMLActivity}: java.lang.UnsupportedOperationException
  E/AndroidRuntime( 1782):  at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2197)
  E/AndroidRuntime( 1782):  at android.app.ActivityThread.startActivityNow(ActivityThread.java:2037)
  E/AndroidRuntime( 1782):  at android.app.LocalActivityManager.moveToState(LocalActivityManager.java:135)
  E/AndroidRuntime( 1782):  at android.app.LocalActivityManager.startActivity(LocalActivityManager.java:347)
  E/AndroidRuntime( 1782):  at oracle.adfmf.Container.activateHiddenBackgroundFeature(Container.java:2128)
  E/AndroidRuntime( 1782):  at oracle.adfmf.Container.activateAdfApplication(Container.java:1277)
  E/AndroidRuntime( 1782):  at oracle.adfmf.Container.activateAdfApplication(Container.java:1263)
  E/AndroidRuntime( 1782):  at oracle.adfmf.Container$LayoutLoader.resumeApplicationLoad(Container.java:867)
  E/AndroidRuntime( 1782):  at oracle.adfmf.Container$LayoutLoader.run(Container.java:786)
  E/AndroidRuntime( 1782):  at android.os.Handler.handleCallback(Handler.java:733)
  E/AndroidRuntime( 1782):  at android.os.Handler.dispatchMessage(Handler.java:95)
  E/AndroidRuntime( 1782):  at android.os.Looper.loop(Looper.java:136)
  E/AndroidRuntime( 1782):  at android.app.ActivityThread.main(ActivityThread.java:5026)
  E/AndroidRuntime( 1782):  at java.lang.reflect.Method.invokeNative(Native Method)
  E/AndroidRuntime( 1782):  at java.lang.reflect.Method.invoke(Method.java:515)
  E/AndroidRuntime( 1782):  at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:777)
  E/AndroidRuntime( 1782):  at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:602)
  E/AndroidRuntime( 1782):  at dalvik.system.NativeStart.main(Native Method)
  E/AndroidRuntime( 1782): Caused by: java.lang.UnsupportedOperationException
  E/AndroidRuntime( 1782):  at com.android.webview.nullwebview.NullWebViewFactoryProvider.createWebView(NullWebViewFactoryProvider.java:41)
  E/AndroidRuntime( 1782):  at android.webkit.WebView.ensureProviderCreated(WebView.java:2058)
  E/AndroidRuntime( 1782):  at android.webkit.WebView.setOverScrollMode(WebView.java:2116)
  E/AndroidRuntime( 1782):  at android.view.View.<init>(View.java:3461)
  E/AndroidRuntime( 1782):  at android.view.View.<init>(View.java:3517)
  E/AndroidRuntime( 1782):  at android.view.ViewGroup.<init>(ViewGroup.java:470)
  E/AndroidRuntime( 1782):  at android.widget.AbsoluteLayout.<init>(AbsoluteLayout.java:52)
  E/AndroidRuntime( 1782):  at android.webkit.WebView.<init>(WebView.java:498)
  E/AndroidRuntime( 1782):  at android.webkit.WebView.<init>(WebView.java:475)
  E/AndroidRuntime( 1782):  at android.webkit.WebView.<init>(WebView.java:455)
  E/AndroidRuntime( 1782):  at android.webkit.WebView.<init>(WebView.java:444)
  E/AndroidRuntime( 1782):  at android.webkit.WebView.<init>(WebView.java:434)
  E/AndroidRuntime( 1782):  at org.apache.cordova.CordovaWebView.<init>(CordovaWebView.java:118)
  E/AndroidRuntime( 1782):  at oracle.adfmf.phonegap.PhoneGapAdapterWebView.<init>(PhoneGapAdapterWebView.java:30)
  E/AndroidRuntime( 1782):  at oracle.adfmf.phonegap.AdfPhoneGapActivity.createWebView(AdfPhoneGapActivity.java:523)
  E/AndroidRuntime( 1782):  at oracle.adfmf.phonegap.AdfPhoneGapActivity.init(AdfPhoneGapActivity.java:506)
  E/AndroidRuntime( 1782):  at oracle.adfmf.phonegap.AdfPhoneGapActivity.onCreate(AdfPhoneGapActivity.java:442)
  E/AndroidRuntime( 1782):  at android.app.Activity.performCreate(Activity.java:5242)
  E/AndroidRuntime( 1782):  at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1087)
  E/AndroidRuntime( 1782):  at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2161)
  E/AndroidRuntime( 1782):  ... 17 more
  W/ActivityManager( 1240):   Force finishing activity com.company.OracleMobile/oracle.adfmf.Container
  D/gralloc (  926): Registering a buffer in the process that created it. This may cause memory ordering problems.
  E/libEGL  (  926): called unimplemented OpenGL ES API
  E/libEGL  (  926): called unimplemented OpenGL ES API
  E/libEGL  (  926): called unimplemented OpenGL ES API
  E/libEGL  (  926): called unimplemented OpenGL ES API
  E/SurfaceFlinger(  926): glCheckFramebufferStatusOES error -286649159
  E/SurfaceFlinger(  926): got GL_FRAMEBUFFER_COMPLETE_OES error while taking screenshot
  E/libEGL  (  926): called unimplemented OpenGL ES API
  E/libEGL  (  926): called unimplemented OpenGL ES API
  W/WindowManager( 1240): Screenshot failure taking screenshot for (164x246) to layer 21005
  I/Choreographer( 1240): Skipped 30 frames!  The application may be doing too much work on its main thread.
  W/ActivityManager( 1240): Activity pause timeout for ActivityRecord{b25294d8 u0 com.company.OracleMobile/oracle.adfmf.Container t7 f}
  I/Choreographer( 1240): Skipped 386 frames!  The application may be doing too much work on its main thread.
  I/Choreographer( 1240): Skipped 418 frames!  The application may be doing too much work on its main thread.
  I/Choreographer( 1240): Skipped 442 frames!  The application may be doing too much work on its main thread.
  D/rpctransport( 1443): sendRpc: failed: 46
  

  Hi SayantanSinha,

  If you look under API supported levels, the maximum is 19 API.  I can't speak for the ADF 11.1.2 but the lines of code in the (more recent) MAF, who have a similar support matrix, we have noted problems with the API 20.

  You can download older versions of the API of the Manager of Android SDK tool.  Remember to update your EPCO or JDev SDK configuration with the version that you want to use once it is installed.

  Oracle JDeveloper 11g Release 2 (11.1.2) Certification