To access the files from the old drive to primary

Similar Questions

• Cannot access music files from external hard drive - without permission

  original title: I can't get my computer to get permission to access my music files on an external hard drive.  I set all permissions and sharing. Can you help me???

  I HAVE READ THE ARTICLES of PERMISSIONS AND FOLLOWED all THE directions. I ALSO ' ' THE READER AND SHARED FOLDER

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  3. are you able to access other files?

  Method 1:

  Try restarting your computer in safe mode and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2:

  I suggest you for the link and check the drive for errors:

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: when running chkdsk on the drive hard if bad sectors are found, it tries to repair this sector and if all the available data may be lost.

  Let us know if it helps.

• I had a laptop get wet, now I have a new and need to get files from my old drive guard saying access denied what can do

  I have my hard drive in an external case and need to get my files out of it

  Type access denied in Help and he will tell you.

  --
  ..
  --
  "Brian K Thompson" wrote in message
  News: e1472a05-1e4f-425f-88da-7fcb44678cfa...
  > I have my hard drive in an external enclosure and need to get my files out of it

• copy files from my C drive to my external drive error E 0x800718ac3: the volume is dirty?

  Original title: can anyone help with this problem error 0x800718ac3: the volume is dirty?

  I am trying to copy files from my C drive to my external drive E using the operation drag and drop method. That's what happens "error 0x800718ac3: the volume is dirty" can you help me?

  Hello

  1. What is the full error message?

  2. what operating system is installed on the computer?

  3 did you changes to the computer before the show?

  4. What are the names of files and the exact location of the files you are trying to copy?

  Method 1:   Format the external drive of E and see if that helps.

  Reference:

  Formatting disks and drives: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

  Note: Format deletes the data on the disk. Be sure to back up data before the format.

    

  Method 2: You can check the external E drive to find errors.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Reference:

  Check a drive for errors:

   http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

• I downloaded Windows Easy Transfer, but when I try to transfer files it gives me only the possibility of: is this your new computer. I want to transfer files FROM my old to my new computer.

  I downloaded windows easy transfer to my new computer, but when I try to transfer files that it only gives me the possibility of "does your new computer" I want to transfer files FROM my old to my new computer

  Hello

  I suggest you to follow the steps in this article and check if it helps:

  http://support.Microsoft.com/kb/928634

  It will be useful.

• error 0x80071ac3: difficult to copy the files from my old, but still working, USB

  I have just brought a new USB and can't copy files from my old, but still function, USB. Both are Kingstons not that it matter. I get the object from the error message "the volume is dirty" etc. I ran the disk of the property toolbox check both via the command prompt "chkdsk x:/F and / r." I still can't copy a large number of files.

  I have just brought a new USB and can't copy files from my old, but still function, USB. Both are Kingstons not that it matter. I get the object from the error message "the volume is dirty" etc. I ran the disk of the property toolbox check both via the command prompt "chkdsk x:/F and / r." I still can't copy a large number of files.

  Hello

  Files that cannot be copied are in bad clusters.

  Try running chkdsk x:/b

  The /B switch will cause the disk check to reassess the bad clusters and try to fix them again.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• I copy / paste a file from a hard drive to a usb port and now I lost the USB I get the hard drive?

  I move a file from a hard drive to a usb port and now I lost the USB I get the hard drive

  Tuesday, June 26, 2012 13:21:43 + 0000, MarvinBester wrote:

  I move a file from a hard drive to a usb port and now I lost the USB I get the hard drive

  "Deleting" a file does not actually delete it marks just the space
  also available to be used. There are third-party programs that can
  sometimes recover deleted files. The problem is that the space used by
  the file is likely to be replaced very quickly, and it makes
  the unrecoverable file.

  So your chances of successfully recover this file are decent if you
  Try it again immediately after the deletion of it and go quickly
  downhill from there. If you have used the computer since then (for
  example to write this question and read this answer), your chances may
  be very poor now.

  But if the file is large enough, it's still worth a try. Stop
  using the computer in question immediately, if you have not done
  already. Download an undelete program (and here's one:)
  http://www3.TELUS.NET/mikebike/restoration.html but there are several
  others to choose from; Do a search) on a friend's computer (do not
  it on yours because that would overwrite the files you want
  Undelete) and bring it to you on a CD or thumb drive to try.

  If that fails, your only recourse is to bring or send the disc
  a company of professional file recovery. This kind of service is very
  expensive and may or may not work in your case.

  Ken Blake, Microsoft MVP

• I just installed a new drive faster. How can I get windows live mail from the old drive to the new drive

  Where are the files stored WindowsLiveMail?  Under what article directory.  I have "tons" of e-mail messages stored on the old disk and need to move them to the new drive faster.  How can I do?

  The location of the store folder, which contains all the messages, calendars and the account settings, is configurable by the user. The default location is
  C:\Users\{user}\AppData\Local\Microsoft\Windows Live Mail

  If the installer of WLMail is a record storage in the default location, it normally acknowledge and take into use if. The only user that would be required should reinstate saved passwords. If this is to succeed, the old and new installations of WLMail normally must be exactly the same construction. The storage location must be in place in the default location on the new drive before installing WLMail. Also, the current user must be the owner of the record store to its new location.

  If the old drive is installed on the same computer as the new facility in WLMail, you can point the Import Wizard to import messages to the old folder of the store. They will find under storage folders into imported folders.

• When I transfer files from my hard drive on a USB flash drive, the transfer rate is very slow, about 250 KB / second. Is it possible to increase the speed of transfer rate

  When I transfer files from my hard drive on a USB flash drive, the transfer rate is very slow, about 250 KB / second. Is it possible to increase the speed of transfer rate

  depends on the speed, support USB 2.0, USB 2.0 ports, and with active BIOS settings

  (2) you can increase the speed, if your motherbaord has a USB 3.0 port and must be enabled in the BIOS

• I need to copy files from my USB DRIVE to the vmserver running RHEL 5

  I need to copy files from my USB DRIVE to the VMSERVER running RHEL 5

  I can tether the drive to my host, but my VMserver does not see the drive.

  Is there some way to copy files from to the VMserver USBDISK create through vSphere, ESXi

  bndwork

  Moved to VMware Server------General questions forum.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• I need to get data/files from my old hard drive that won't start no-how I connect it to my new computer?

  I have a new computer with Windows Vista.  My old computer does not start (lights turn on but just spinning noise that nothing appears on the monitor).  I need to get the data/files from my old hard drive.  Can I connect the old drive to my new computer to access the files?

  Connect the older hard drive to your computer and transfer the content:

  How do I add an additional hard drive
  http://www.WikiHow.com/add-an-extra-hard-drive

• My Vista desktop crashed and I need to access the hard drive on USB. Permission is denied

  I have a desktop Vista raid 1 and raid system crashed.  I put a new hard drive and no Vista Recovery.  I put the old drive in an enclosed and when I try to open it, I get "you don't have permission to access this drive."  I have the passwords for the player but do not know how to access.  Any ideas?

  Hello lightly,

  Here are the steps to change the ownership and permissions:

  1. Right-click on the file or folder, click Properties, and then click the Security tab.
  2. Click Advanced, and then click the owner tab.
  3. Click Edit, and then do one of the following:

  · To change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.

  
  To change the owner to a user or a group is listed in the change owner to box, click the new owner.

  4. If you want to take ownership of the contents of the folder, select the check box Replace owner of subcontainers and objects .

  5. click OKand then click Yes when you receive the following message is displayed:

  You are not allowed to read the contents of directory folder_name. Do you want to replace the the directory permissions with permissions granting you full control?

  All permissions will be replaced if you click Yes.

  Note: folder_name is the name of the folder you want to take charge.

  6. click on OKand then reapply the permissions and security settings that you want for the folder and its contents.

  Additional remarks:

  • An administrator can take ownership of any file on the computer.
  • Affecting the ownership of a file or a folder might require that raise you your permissions using user access control.

    Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• TuneUp Utility has been installed on a trial basis, it changed the things that made it impossible to access the C:\ drive to install the important updates and uninstall Tuneup Utilities.

  On my old Dell with Windows XP I installed Tuneup Utility on an experimental basis, it changed things that made it impossible to access the C:\ drive to install the important updates and uninstall Tuneup Utilities.

  Anyone have a solution?

  Help, please.

  Software support to the YOU seem hopeless, they donot even read the request entirely to meet the last 8 weeks and many emails in series.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  Method 1:
  Try to uninstall the utility and check if it helps:
  http://support.Microsoft.com/kb/307895

  Method 2:
  Try to restore the computer to the point before you install the utility and check if it helps.
  http://support.Microsoft.com/kb/306084

  It will be useful.

• How can I install Windows 7 onto the new drive while keeping Windows XP on the old drive?

  Wow for on 1 computer install 2 operating systems with 2 hd

  I have 2 hard drives; We have Windows XP and the new one is empty (empty) installed on a computer.  I would like to install Windows 7 on the new hard drive.  How can I install Windows 7 onto the new drive while keeping Windows XP on the old drive?

  Thank you

  Hello

  Sound pretty simple you just need to start from the disc and choose the 2nd hard drive during the installation of windows 7
  your xp will remain such what. every time that you start the system it will ask you to choose which operating system you need
  Start with.
  thanx.