To access the HP LaserJet 1320 on Windows 7 64 bit computer

Similar Questions

• Cannot access the internet with bridged network - Windows 7 64 bit host, XPSP3 comments

  I use VMPlayer v3.0.1 build-227600 on a PC under Windows 7 64-bit. My guest operating system is Windows XP Professional w/SP3.

  I read all the messages on the use of NAT for the guest operating system can access the internet. But when I do that my guest is unable to access my Oracle server on my network. If I use Bridged my guest can access my Oracle server, but it cannot access the internet! How can I fix it? Shouldn't VMPlayer allow the guest OS to access the network and the internet? I need these two features.

  Any help would be appreciated.

  the simplest solution would be to add a second NIC to your comments, so that you can have bridged and NAT at the same time

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Access is denied, cannot delete the hp LaserJet 1320 PCL 5 device

  HP LaserJet 1320 PCL 5 can not delete from my PC (Windows 7). Get the message "access is denied, cannot delete the hp LaserJet 1320 PCL 5 device".
  Any help will be greatly appreciated.

  Hello

  Method 1:

  Run the fixit available in the link below and check if that makes a difference

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  If the problem persists, I will be asked to contact the hardware manufacturer for assistance:

  http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?cc=us&lang=en&prodSeriesId=410622&prodTypeId=18972

  Hope the above information is helpful.

• Cannot access the profile of Thunderbird in Windows 7 Manager

  I followed the instructions in support. Mozilla to access the profile of Thunderbird in Windows 7 Manager. But I can't access Thunderbird Profile Manager. I tried different ways to search for thunderbird.exe - P, but Windows 7 won't cough upward Thunderbird Profile Manager - it starts just the program Thunderbird. Any suggestions?

  Press the Windows (between Ctrl and Alt) and R and type this into the box:

  Thunderbird.exe Pei

  and then click OK.

• Impossible installed hp laserjet 3055 to windows 7 32-bit operating system

  Impossible installed hp laserjet 3055 to windows 7 32-bit operating system

  Hi Abhay,

  You can not install printer HP with Windows 7.

  1. do you receive an error message when you connect to the printer?

  2. what happens when you connect to the printer?

  3. were there any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please let us know if you need more assistance. We will be happy to help you.

• My question is how to open the system advanced settings in window 7 64-bit home preuim

  My question is how to open the system advanced settings in window 7 64-bit home preuim

  Hello

  Assuming you mean the Windows Advanced System Settings screen, then right click on my computer and choose Properties.  On the left side of the screen, you will see a link for the advanced system settings.

  You can also call directly my pressing the windows and R key (which will bring up the Run dialog box) and typing in control sysdm.cpl

  I would like to know how you, or if you want to say something else.

  Good luck & enjoy Windows 7
  Jon

  If this message was useful and allowed, please consider the vote and it offers as a response...

  My Blog - www.insidetheregistry.com

• Does the m - 105 palm with Windows 7 64-bit work?

  What are the hardware/software compatible with Windows 7 64 bit?  Try to reinstall the palm for the new cfomputer, but not sure this is possible. No COM port, etc.

  Thank you!

  Just FYI... in the years of the computer, three years is considered a lifetime.  12 years... is pretty much history.  :-)  But Kudos to you for those taking good care of your technology!

• Hi, I have a problem in the installation, how to install acrobat 8.1 pro in 64-bit Windows 7 Enterprise is existing in Windows XP.  I just want to transfer the license Adobe pro 8 Windows 7 64 bit. What is the procedure?

  Hi, I have a problem in the installation, how to install acrobat 8.1 pro in 64-bit Windows 7 Enterprise is existing in Windows XP.  I just want to transfer the license Adobe pro 8 Windows 7 64 bit. What is the procedure?

  You need to install 8 AA on the new OS with your current S/N (the license allows 2 installs). After the installation, do all the updates if you expect any chance of 8 AA to run on the system. If the updates will be installed not in the menu help, then go to ftp://ftp.adobe.com/pub/adobe/acrobat/win/ and install updates in the order. People seem to have been successful with 32 - bit systems and some have reported success with a 64 bit system. After installation, print something to the Adobe PDF printer to make sure it works. If this works, you should be in good shape as printing treat the bottleneck. There is a solution, but you shouldn't have it.

  If all works well, then go back to the old machine and disable this installing and uninstalling. Don't forget that your configuration is not supported by Adobe. It seems with every new version of Windows, MS seeks to make the user to upgrade the other hardware and software for compatibility. There may be legitimate reasons for this action, but the game just seems to be Ms.

• Windows 7, 64-bit computer and Muse

  My brother just bought me a new Windows 7, 64-bit computer. If this effect Muse' negative performance? Since I got the new computer, Muse has been slow and does not much time to restart the program.

  Yes, a huge difference. At present Muse made a very large number of small reads of the .muse file for open and work on the file. Because of the latency above for each individual reading of a server, this makes working with a file on a very slow server.

  Planned changes to the Muse should improve significantly, but working directly on a file stored on a server will always be much more slow to work with the same file stored locally due the latency associated with each file access.

• Cannot find the printer Laserjet 5100 for Windows 7 driver

  I have a HP Laserjet 5100 printer installed on a computer running XP that is on a network without internet access working group.  I have a new Windows 7 computer to the same workgroup.  I want to print documents created on Windows 7 computer with the Laserjet Printer, but I need to install the printer driver Windows 7 to do this.  The drivers of HP support site says the necessary driver is built into Windows 7, but it tells me it's name or I would like to download it.  Suggestions on how to find or download the driver or what is called?

  Hi micror,.

  Drivers for Windows 7 are only available online through Windows Update...

  If the specific computer is unable to access the web, you can download the drivers from the Microsoft Update Catalog.

  As you the not mentioned your operating system type, you can find the two options below...

  If you are not sure of your type of operating system, follow the steps below:

  http://support.HP.com/us-en/document/c02033168

  For the edition of 32-bit operating system, use the first result, 64-bit for the third or the fifth option (that very of your processor type, wrong that does not...)

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=LaserJet%205100

  To download the Microsoft driver, first add the required file to the basket.

  Then click on view basket and follow the download link...

  Because the packet is compressed, you will need to use any archiver program to extract (for example Winrar).

  Last but not least, as a printer is installed on Windows XP can not be automatically shared with the new client OS you need to add drivers to manually as follows:

  1. After you download the right driver to extract it to a temporary folder.
  2. From the Client (Windows 7) go to printers and devices and click Add a printer.
  3. Select this option to add a local printer
  4. From the port selection screen you can create a new port by selecting a Local Port.
  5. In the port name fill a \\HOSTNAME\Sharename prefix
     • To locate the host name of your HOST computer (XP PC), made a right click my computer and select Properties, the hostname will be listed on this screen...
     • To locate the name of the share go to printers and faxes, click right-click the printer icon and select Properties... Then, go to the sharing tab and appears the share name.
  6. Continue add it an assistant of the printer and the driver selection, click on disk... Browse ocntaining pilots the INF folder from your printer.

  Good luck

  Shlomi

• Cannot access the internet on a network Windows XP when Windows 7 goes to sleep

  Original title: Windows 7 Windows XP network problem.

  I replaced a Windows XP computer on my node 4 (2 PC, printer 2) cable network with a Windows 7 computer.  When the Windows 7 computer in mode 'sleep' the other (XP) computer cannot access the internet.  A message appears that there are 2 computers with the same IP address.  If I wake the computer 7 fine.  That is what it is?  I agree not all files between the computers.

  Hello

  It is usually the case when, for example, a router is off, but one or more of the devices connected to the router are left on.

  The devices to retain the ip address assigned to them, but when the router starts up again it has no knowledge of this. If when you start one of the other devices, the router can assign an ip address already in use. Concrete example that I reproduced with my router and the PC...

  • Start the router, then boot PC1 and PC2 - the router (192.168.1.1) will allocate for PC1 192.168.1.2 and 192.168.1.3 to PC2
  • Turn off the router, then turn off PC2, restart and shut off again
  • Put the PC1 to sleep
  • Start the router and PC2, the router does not PC1 and allocate 192.168.1.2 to PC2
  • PC1 to wake up and there still 192.168.1.2 who now is a confrontation with PC2

  Other ways to reproduce this situation may also be possible.

  All devices on your network must have a unique ip address, where the warning message.

  If you get this situation once again, the solution is to turn off all devices, including the router, then restart the router, then restart all devices connected to the router.

  To avoid this, you may be able to put ip Reservations for your router address which will ensure that all devices connected to the router always get the same ip address (unique). If you are unsure how to proceed, we will need your router brand and model to help.

  Tricky

• cannot access the icons and files in windows xp

  I write on behalf of the client. Customer is unable to access his files in his computer based on Windows XP and icons.

  Hello

  • Did you change your computer before this problem?
  • You receive an error message during the access, the icons and files?

  This problem occurs when one or more of the following conditions are met:

  • The registry values that are associated with the file name extension are corrupted or missing values.
  • The computer is infected with a virus.

  You can view these methods:

  Method 1:

  Let us check in SafeMode if the problem persists.

  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

   

  Method 2:

  Here is an article that will guide you in the process of fixing the issue:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

• How to access the USB secure key on windows vista, I get the message that application 10004 could not find any JumpDrive Secure device connected to your system

  Original title: how access key USB secure Windows vista

  I have a lexar player sure to jump that I used with an old computer that has Windows XP.  I now have a new computer with Windows Vista and I can't access the secure part of the USB key.  When I try to access the part secure the USB key I have the following message "Application [-10004] could not find any JumpDrive Secure device connected to your system. Please make sure that your JumpDrive Secure device is inserted into a USB port".

  Of course, the USB key is inserted into the USB port.  If anyone can help find me a way to access the part secure the USB key I would appreciate it.  Thank you.

  Hi Jon0909,

  The error that you received can be for several reasons. I suggest you try the following steps:

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Tips for solving problems of USB devices

  Method 2: This normal matter as a result of a conflict between the USB and other USB (Universal Serial Bus) connected to the computer.

  (a) disconnect all the external devices connected to the computer to expect the mouse and keyboard, check if your USB key works.

  (b) If this solves the problem, and then add back both devices until you discover the piece of hardware causing the issue.

  If the problem persists, you can contact the manufacturer of the device for any known issues
  http://www.Lexar.com/support

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't access the "devices and printers" in Windows 7

  I'm unable to access the "devices and printers" menu in windows 7 (32)

  When I click on the menu, it crashes just a white screen and never load.  I checked the print spooler service and it is running...

  If you have installed McAfee software that can block the enumeration of objects in devices and printers.  Make sure that the Bluetooth service works also if you have any compatible bluetooth devices. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Problem accessing the program appears downloads view - Windows internet Explorer

  I'm using Windows 7 Home Edition on my Lap top, every time I try to get a window in a program through an icon on my desktop, is heading (discover downloads - Windows internet Explorer) how to stop coming all the time when I want to enter a program

  Hello

  1 are. what program you referring?

  2. this happens on all the desktop icons?

  3 have there been recent changes to the computer before the show?

  I suggest to follow the steps provided and check if it helps.

  Method 1: Try to run fix it from the link below:

  Difficulty of broken desktop shortcuts and common system maintenance tasks: http://support.microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2: Change default programs using Set Program Access and computer defaults:
  http://Windows.Microsoft.com/en-us/Windows7/change-default-programs-using-set-program-access-and-computer-defaults

  Changing the programs Windows uses by default: http://windows.microsoft.com/en-US/windows7/Change-which-programs-Windows-uses-by-default

  Method 3:

  If the problem persists, then try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.