To access the local resources of a created Server R2 Microsoft HyperV 2012
Hi out there.
I wonder if someone can help me with a situation I have here.
I have a copy of the Hyper-V Manager 6.3.9600 worm and two virtual, MS 2012R2 servers.
What I want to do is access the files on my local machine via Server interface.
Some resources suggest that you click on "Show options" once I click and highlight a machine especially in the management interface... but I do ' t see how to access this elusive Gold Nugget.
I activated the strategy Mode of Session, improved in the Server tab and I activated the Session Mode improved tab user under Hyper-V settings.
So I ask this question... What can I do (or find) next to the move to the next step?
Thank you
Tags: Windows
Similar Questions
-
ASA 5505 IPSEC VPN connected but cannot access the local network
ASA: 8.2.5
ASDM: 6.4.5
LAN: 10.1.0.0/22
Pool VPN: 172.16.10.0/24
Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.
I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.
Here is my setup, wrong set up anything?
ASA Version 8.2 (5)
!
hostname asatest
domain XXX.com
activate 8Fw1QFqthX2n4uD3 encrypted password
g9NiG6oUPjkYrHNt encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.1.1.253 255.255.252.0
!
interface Vlan2
nameif outside
security-level 0
address IP XXX.XXX.XXX.XXX 255.255.255.240
!
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS server-group DefaultDNS
domain vff.com
vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0
access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0
pager lines 24
Enable logging
timestamp of the record
logging trap warnings
asdm of logging of information
logging - the id of the device hostname
host of logging inside the 10.1.1.230
Within 1500 MTU
Outside 1500 MTU
IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol nt AD
AAA-server host 10.1.1.108 AD (inside)
NT-auth-domain controller 10.1.1.108
Enable http server
http 10.1.0.0 255.255.252.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 10.1.0.0 255.255.252.0 inside
SSH timeout 20
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal group vpntest strategy
Group vpntest policy attributes
value of 10.1.1.108 WINS server
Server DNS 10.1.1.108 value
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the password-storage
disable the IP-comp
Re-xauth disable
disable the PFS
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpntest_splitTunnelAcl
value by default-domain XXX.com
disable the split-tunnel-all dns
Dungeon-client-config backup servers
the address value vpnpool pools
admin WeiepwREwT66BhE9 encrypted privilege 15 password username
username user5 encrypted password privilege 5 yIWniWfceAUz1sUb
the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username
tunnel-group vpntest type remote access
tunnel-group vpntest General attributes
address vpnpool pool
authentication-server-group AD
authentication-server-group (inside) AD
Group Policy - by default-vpntest
band-Kingdom
vpntest group tunnel ipsec-attributes
pre-shared-key BEKey123456
NOCHECK Peer-id-validate
!
!
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege show import at the level 5 exec mode command
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege, level 3 see fashion exec command eigrp
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege see the level 3 exec command mode dynamic filters
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
privilege clear level 3 exec command mode dynamic filters
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4
: end
Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.
The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.
On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.
-
custom palette with tabs to swf Flex cannot access the local file system
OK, with Flash Player 10, we can load and save local files from a flex web application, then why can't I in the bridge, when I load the SWF in a palette with bridge tabs, load and save functions no longer work.
Is it because I'm loading as a ScriptUI called range of flash, instead of a palette of HTML?
I tried the overall Flash Player security in order to allow the authorization of my swf and created a .cfg, but nothing seems to work.
Help, please.
Thank you, Todd
I don't know exactly how your Panel is a failure. I have attached three examples of Flex projects that include the JavaScripts and Flash panels for bridge. These all worked for me in Bridge CS4.
To access the local, I used FileRefrence.save () for these tests - note that this method is file system was added in Flash Player 10, and so this will not work in Bridge CS3, which uses the Flash Player 9 when you use a widget Flash Player in ScriptUI. In addition, to compile the example I had to modify the Flex builder projects require Flash Player 10 by changing the settings on the page 'Flex compiler' project in Flex Builder settings.
If you use another method to access the system files that works with Flash Player 9, please let me know what it is and I can test it.
Among sovereign wealth funds also gain access to the network. To activate SWF access to the network, I had to add a file of global security settings. Information on creating these files are available here:
http://www.Adobe.com/devnet/flashplayer/articles/flash_player_10_security.PDF
But, for example, on my mac, I put all these projects in a "BridgeFlashPanels" folder on my desktop. Next, I created the BridgeFlashPanels.cfg file in/Library/Application Support / Macromedia / FlashPlayerTrust. The .cfg file had a line: the path to the folder on my desktop.
A description of the panels:
PanelWithNetworkAccess - this Panel has a 'Test' button, when clicked, loads http://www.adobe.com and place it in the text box (note, it will be just the raw HTML, does not make the page).
PanelWithFileSystemAccess - for Flash Player 10 only, this Panel has a Test button and a text field. When you click the Test button, it writes the contents of the text box in the BridgeTest.txt file, unless you choose another file.
PanelWithNetworkAndFileSystemAccess - for Flash Player 10 only, this Panel has a text field and two buttons: "Load Test" and "Test to save." The load test loads http://www.adobe.com in the text field and save him testing saves the content of the text field to BridgeTest.txt.
To try signs, navigate the bin-debug for each project files with Bridge, the .swfs and .jsx files are there. Double-click the thumbnail for the .jsx and bridge must run the script and add the sign indicating the SWF file.
-David
-
Is possible to create the WINS resource record in DNS server and how?
Is possible to create the WINS resource record in DNS server and how?
No resource record WINS I can create when it right click on and select "other new records".
If you were using abusive or foul language, insults, etc. He would get you banned from the forum.
If you have done any of these, then I suggest that you do the following:
If banned, ask reason why and offer him your defense
If not banned, then let them know the name of the person "you kicked off the forum" reports of ill-treatment. They will study.
If you haven't seen any action on your report, and suspect that the Forum is not being actively monitored, you can request action by clicking the Site feedback link at the bottom of any Forums page. -Taken from
Forums Help FAQ
http://social.technet.Microsoft.com/wiki/contents/articles/7359.forums-help-FAQ-en-us.aspx#197
We get off topic with this conversation and the COC States:
Keep the topics of conversation on track. ............
.......... Discussions can be blocked in the forum comments if necessary.
If there is any other questions about WINS, then consider marking response as appropriate.
-
How to access the "Local Settings" folder in Vista.
Have an Adware bug stuck to the folder "Temporay Internet" McAfee can't remove it completely. In XP, you could access the local settings folder to manually delete the Temp and Temporary Internet files. I liked to do this because you have been assured that all deleted. But in Vista, all I get is access denied! And this applies to other as well protected system files. Is there a way to change the security settings for this folder?
Local Settings is a junction point : a hidden and protected operating system file that is not accessible to the user. He points to the folder accessible by the user
C:\Users\\AppData\Local
Have you tried to delete temporary Internet files in Internet Explorer? Click Tools > Internet Options > delete .
Boulder computer Maven
Most Microsoft Valuable Professional -
Original title: sharing folder error
How to solve this error message when I am trying to share a folder: "an error has occurred when trying to share
. There is no end point for more available from the endpoint mapper. The shared resource was not created at this time. » Hello
Were there any changes made on the computer before the show?
I suggest to see the link and try to run the Troubleshooter:
Share files with anyone
http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone
See also:
File sharing essentials
http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials
-
remote VPN and vpn site to site vpn remote users unable to access the local network
As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config
The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.
ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.Hello
Looking at the configuration, there is an access list this nat exemption: -.
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
But it is not applied in the States of nat.
Send the following command to the nat exemption to apply: -.
NAT (inside) 0 access-list sheep
Kind regards
Dinesh Moudgil
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
Easy VPN not able to access the local network
Hi guys,.
little hope can help me, I'll give you a run down on the config.
I have a border router that is a no. 2851 connected to the No. 2851 is a switch cisco 3750 running Routing inter - vlan with four VLANS.
I have easy VPN server on the edge router No. 2851 I am able to connect remotely from a client vpn cisco with a problem but I can't access the local network on the server, I tried everything with no luck.
I have a cisco VPN client installed on a 64-bit windows system 7 and I also tried with windows xp 32-bit system and still no luck.
Please I need help I need to get this race to end of trading today.
I will be copying and pasting the edge router config please if someone get review and see if the config is good.
You need to change your ACL PAT of standard to extend and to deny traffic to be translated to the Pool of VPN:
access-list 120 deny ip 10.10.10.0 0.0.0.3 10.10.50.0 0.0.0.255
access-list 120 deny ip 192.168.XX.0 0.0.0.255 10.10.50.0 0.0.0.255
access-list 120 deny ip 172.16.XX.0 0.0.0.255 10.10.50.0 0.0.0.255
access-list 120 deny ip 172.1X.20.0 0.0.0.255 10.10.50.0 0.0.0.255
access-list 120 deny ip 192.168.XX.0 0.0.0.255 10.10.50.0 0.0.0.255
access-list 120 allow ip 10.10.10.0 0.0.0.3 all
IP access-list 120 permit 192.168.XX.0 0.0.0.255 any
IP access-list 120 permit 172.16.XX.0 0.0.0.255 aniy
IP access-list 120 permit 172.1X.20.0 0.0.0.255 any
IP access-list 120 permit 192.168.XX.0 0.0.0.255 any
overload of IP nat inside source list 120 interface Dialer0
no nat ip within the source of the list 1 overload interface Dialer0
clear the ip nat trans *.
Hope that helps.
-
I try to download my master CS6 on a new hard drive because my old one was crushed and I get a message saying "unable to write file" or "I have not authorized to access the requested resource."? What does that mean?
It was a matter of software support. Thank you! Figured it out.
-
Difficulties to access the local photos on Android
(Issue affected users on transformer Asus and Acer 500 tablets)
I have some problem to access the local photos: None of the photo available in the built-in storage and SD card see the upward.
Is there a setting to set a default photo folders so be displayed? Or someone else having the same device has the same problem?
I noticed another problem also when uninstalling the apps, google automatically cancel the order and refund? and I'm not able to redeem and reinstall.
Are anyone who has purchased directly from Adobe, you having the same problem?
My camera's processor asus TF101
Android Version 3.2.1
Build number: HTK75. US_epad - 8.6.5.19 - 20111107
Thank you
Post edited by: ibarrien
Maybe you can try to erase the storage of 'media '.
Check if it helps then restart. With the 'Gallery' of compensation application.
Thank you
Ignacio
-
Access the interface user Web de VMware Server 2 will crash Firefox 3.5
Hello
Trying to access the web interface installation of VMware Server 2 running on Enterprise Linux 5 update 2 64-bit
using Mozilla Firefox 3.5 on XP causes Firefox to crash.
Previous Firefox 3.0.11 version was able to connect and log in successfully.
Everything in FF 3.5 cach has been deleted before trying to access the user interface. In addition, the certificate has also been removed before.
When you access the UI first with 3.5 ist ask to accept the certificate (identical to 3.0.11)
This will result in a blank page is displayed.
Closing FF 3.5 (clear cache included) and re-open it at the interface of the web UI that causes FF crash.
I m the only one to see this problem with the new Firefox 3.5 access to VMware Server 2 Web UI?
Kind regards
Agent of
Although VMware-server - 2.0.1 - 156745.x86_64 has been out for a while, so I just assumed it was your version.
Silly me
Hope that cure your problem.
-
Cannot access the local admin page after first start
Hello
I am not able to access my newly purchased RN202, SN 45Y2535W003FC. I just plugged the power cable and turned on, but the power light keeps blinking even after hours. The NAS will connect to my local network with the ip 192.168.178.32 and ends by RAIDar under this address. However, the local admin under https://192.168.178.32/admin and https://192.168.178.32 page (even with http://) is not accessible. The connection is not accepted (cannot be connect-page in the browser). Also access more ReadyCLOUD is not possible, because the NAS cannot be discovered. Currently, there are no hard drives in the NAS. I also tried to insert a HARD disk already formatted in combination with a factory reset, but it does not work with the same result. It's already a replacement unit by my retailer the first device showing the same behavior, so I excluded a technical defect. What I am doing wrong? Any help would be greatly appreciated.
Best regards
Patrick Schmidt
OK I found the solution by myself. Without a HARD disc inserted the NAS will not start correctly. As mentioned, I already tried to insert a HARD drive and then do a factory reset. Now, I saw that I have is to not properly place the HARD disk. If you open the lock on the grid (the thing in which you put the HARD drive), then you can not insert in the case completely and do not connect the connector of power und data. Maybe a little more detailed manual on it (for Dummies like me) would be useful. Argh...
-
Cannot access the local users and groups
Hello everyone, I got this error since April 2010:
Cannot access the computer ComputerName. The error was: invalid syntax.It is not really bad for me, because I used to use the cmd console.
I followed several recommendation to solve this error, but without success. Many colleagues have the same error. About 100 of the 500 have this problem.
Don't tell me to reinstall the PC because it is not possible. I have no spare time to set my PC again and install all required software. And to reinstall the PC isn't sollution.Re-register the dll or other files not work. Not work replace the msc or cpl files. Installation of the admin packs, technical resource kits or installer also not work.
No errors in the application logs, no errors in the system log, no errors in the security logs. GPO is clear. The same mistake in compmgmt.msc, lusrmgr.msc, or when I add the MMC snap-in. So I guess that the error in the XML (MS XML) parser tool or in the msc file.
Do someone have the solution for this?
Yet once the relocation no solution!
Hi Peter,.
In this case, I would say that you post your question in the Microsoft TechNet forums such that there is a problem with more than 100 computers.
-
Change sharing permissions, now I can't access the local disk
Hello all, I have two computers, both running windows 7 (one is 64-bit and the other is 32-bit) connected via LAN and WiFi. One of them has all of the local disk shared with full compensation for everyone (full control). I decided to remove these permissions and control to "deny". Then I had to cancel the task and decided to resume later. HURT, now I've lost access to this drive, even though I can access some files. When I try to enter in the drive, an error message appears saying "C: is not accessible. Access is denied. I did some research and it seems to be a common problem, but I followed all the steps did not work. It shows as 0 bytes and security options does not show anything, but "you don't have permission to view or change the permissions of the object settings. I tried to adapt, even in safe mode and as administrator, do not to prevail. It keeps saying 'access denied' I also tried to set a hidden administrator account, but the account manager is 'not available for my system' when I made these unfortunate changes, it was not this computer but on the other, I think it might be the reason. Now, I can not access my local disk or change anything. Please, help me, I can't find a solution to this mess!
Thank youHello
I suggest you to follow the steps in the link given below and check if it helps.
How to open a file if I get an access denied message?
http://Windows.Microsoft.com/en-CA/Windows7/how-do-i-open-a-file-if-i-get-an-access-denied-message
Let us know the status of the issue.
-
Access to local resources with Anyconnect
I have an ASA 5505 9.2 running. I Anyconnect work because it establishes a connection, and users can navigate on the Internet with the split tunneling. However, they cannot access the internal servers or ping same them.
I suspect NAT but I am no expert and I did some google-ing, but most of the directions are written for a different version of the IOS.
I have attached the running configuration. Accessible servers are on the network 192.168.1.x. The VPN pool is in the 192.168.2.x network.
Thank you.
Yes - when you ping the network internal your ASA inside (on the network) address is the source address.
When your VPN clients are trying to achieve here resources, their source address is 192.168.2.x. unless the internal network hosts a default gateway to your ASA or their internal/other router has a static route (or road Dynamics if you use a routing on the SAA protocol that you are not in this case) to get to 192.168.2.0/27 through the ASA return of traffic will not make it back to the ASA. It will instead go to their default gateway and not to put in place (or complete) a connection (TCP) or debit (UDP or ICMP).
Maybe you are looking for
-
Hello. I know that Microsoft's XP down in April. But what of us XP users who want to continue to use the great OS. And someday I might decide to install XP everywhere after cutting. What do I have to manually download and install all updates after SP
-
my computer will not install the update of security for Windows XP (KB2481109)
Moderator before go Note: IE8.----- my computer will not install the update of security for Windows XP (KB2481109) can you help me.
-
Windows 7 is not genuine, build 7601.
Hello, a few hours ago when I booted up my computer HP laptop this morning he now says my Windows 7 Home Premium is not authentic. I even try to re active using the key printed on the bottom of my laptop, but all I get is the invalid product key. I w
-
Two of the four USB ports on my laptop has suddenly stopped working!
My laptop (HP Pavilion) has a total of 4 ports USB (two on the left side) and two on the right side all of a sudden my laptop developed this problem, two ports USB on the left side of the laptop no longer works... They didn't stop working completely,
-
Help of blackBerry Smartphones: Media refuses to play.
Earlier, something was wrong with my blackberry, for some reason, an error message comes whenever I try to play the media which has been very well before. How can I resolve this issue?