To access the PIX501 via HTTP
I'm a little confused right now. I'm trying to config PIX501 accessmy & PDM via HTTP, but it's not working. Please see my config below. Thank you!
6.3 (3) version PIX
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the
passwd
fixup protocol dns-length maximum 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol 2000 skinny fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names of pager lines 24 debug logging in buffered memory Outside 1500 MTU Within 1500 MTU IP address outside dhcp setroute IP address inside 10.29.18.1 255.255.255.248 alarm action IP verification of information alarm action attack IP audit location of PDM 10.29.18.0 255.255.255.248 inside PDM 100 debug logging history of PDM activate ARP timeout 14400 Global 1 interface (outside) NAT (inside) 1 0.0.0.0 0.0.0.0 0 0 Access-group outside-outside interface Route inside 10.128.40.0 255.255.255.240 10.29.18.2 1 Timeout xlate 0:05:00 Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225 H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00 Timeout, uauth 0:05:00 absolute GANYMEDE + Protocol Ganymede + AAA-server RADIUS Protocol RADIUS AAA server AAA-server local LOCAL Protocol Enable http server http 10.29.18.0 255.255.255.248 inside No snmp server location No snmp Server contact SNMP-Server Community public No trap to activate snmp Server enable floodguard Telnet timeout 5 SSH timeout 5 Console timeout 0 dhcpd outside auto_config Terminal width 80 Hello Your PIX config has the following: Enable http server http 10.29.18.0 255.255.255.248 inside If you try to access the market SHARE of 10.128.40.0 255.255.255.240 then you must add this to your config as file: http 10.128.40.0 255.255.255.240 inside Your routing looks correct on the PIX, its delivery to 10.128.40.0 255.255.255.240 by what seems to be your SOHO router, so you should be able to ping the inside interface of the PIX If not add "icmp allow no matter what Interior" Rgds Paddy Tags: Cisco Security Safe mode, so I can not access the Services via a Normal startup. Services, including Security Center, Windows Update, SuperFetch needs to be restarted but Vista freezes outside Mode safe, so I can't access the Services via a Normal startup. * original title - problem of catch-22 with Vista freezes *. Hello 1. don't you make changes to the computer until the problem occurred? I suggest you to try the steps below and check if it helps. Try to put your computer in a clean boot state, and check to see if the same problem happens. By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem. How to troubleshoot a problem by performing a clean boot in Windows XP: Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode. Hope this information is useful. Cannot access the videos via USB more Nice day I have a HDR-SR10. I can't access the videos via USB more. drive appears blank in windows 8. Videos can be played through the screen of the device. Help, please Yes. Tried 2 usb ports with no luck. to access the components via script? Hi can someone tell me how to access the components via script pls... Thank you Hello You can access any component in the flex application based on the hierarchy of this component. parentApplication.CompParentOf_2.CompParentOf_1.AnyComponent; parentApplication.CompParentOf_2.CompParentOf_1.AnyPublicVar; ParentApplication is defined as the main appplication. You can use this script anywhere in the application. I hope this can help you if you are looking for it. Thank you. - Afonso When I access the net with firefox, a new tab opens on a specific page. How can I block access to this site or stop firefox from loading? Here is the site in question: A few times a week is since I started using firefox Make a check of malware with a few programs to scan for malware. http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware Cannot access the readynas via the network of windows 7 since the 65.5 update I have a readynas 102 fixed by a switch to a windows 7 computer pro. Before the update, to 65.5 I could still access the files on my readynas 102 (name: homedrive) by selecting it under Network > homedrive Since the update, it still appears in 'network', but clicking on does not give me access more :-( I found that I can open the homedrive ready nas using the IP (\\192.***.*.***) in a new window of Solution Explorer. The media unit also works very well to access music. But why can't access through the 'network' - and why he always appears without giving me access... I guessed that maybe it's to do with the new credentials of connection (since the change of a name of the EBU to an e-mail address), but how to change it in my windows pc network? Any help would be great and simple steps please! Thank you very much. Thanks to your inspiration I solved it my changing the password of the network connection of the former username of pre update for the new updated post e-mail deal as username via windows credentials... thank you everyone :-) Air 1131AG - cannot access the unit with http I just bought two 1131AG and am not able to access the unit with Internet Explorer. The two units Gets an IP address from my DHCP server and not to ping requests. Unfortunately, 21, 80, and 443 ports are not open and IPSU Cisco sees not the device either. The fact that I have two new units that have exactly the same problem makes me think I'm doing something wrong. I also have access to the consoles. Thanks in advance. Based on the number of your room, you have just taken delivery of the Lightweight Access Point. You need to convert the LWAP in standalone (if that is your intention). Convert a standalone Lightweight Access Point Click on the link above and the procedure you're looking for is under the heading "Using a TFTP Server to return to a previous version". Good luck. Please rate when useful and/or there is. Thank you. OBIEE 11 G to access the RPD via Enterprise Manager Laughing out loud Recommended links, NY Times, Top Charts, and Top authors are not allowing me to access the iBook on my iPad store. This problem began immediately after I downloaded and opened a book called "'Adobe After Effects: A Stey by step Guide" by Richard Lee. " I tried all of the fixes published to access the iBook store, but nothing has worked. I don't feel this problem on my iPhone, which is synchronized to my iPad to share books. How to solve this problem without having to do a restore complete, please? "I tried all of the fixes published to access the iBook store, but nothing has worked." We have no way of knowing exactly what troubleshooting have you tried unless you tell us. If you have not yet tried, reboot your iPad. Need to reinstall all the software for non-native Mac (OS 10.9.1) at a MacBookPro 2009 vintage, I had installed Firefox v. 27. As I tried to connect to the web links (which many were not problematic), I started gradually to meet the pages that would never load. Then I got a similar behavior with URL entered manually (only some; gradually more frequent). I had installed some standard modules of privacy, but I uninstalled then them. I tried to reset Firefox without result. I freshly reinstalled (or so I thought) nothing works. I tested the performance against the native Safari and initially had some problems but could access certain websites. At the point where I realized I should do a clean removal of Firefox, I was no longer able to access to any site of Mozilla in any way, except the Help menu on the installed copy and who wouldn't let me download a new copy of v.27. I was able to access a CNet Firefox download page, and he agreed than an interrupted download request but each test (5). I'm hoping to learn a way (may need to be drop the a v. 27 dmg, but hope not) to return to the operation. I am also successfully to access the download sites. I think that it is now OK. Thanks a lot for the replies and suggestions. The firewall seems to have been it. I can't go online with or without wire. I've uninstalled and reinstalled IE 7 and 8. And firefox installed. Still can't. Message reads page cannot be displayed. When I fix it cannot renew ip address Help original title: I can't go online with or without wire Hello I suggest you follow the steps mentioned below: Method 1: Renew the IP in the command prompt and check if the problem persists. Follow these steps to open the command prompt and type the command: a. click the Start button. Type cmd , and then click on OK. (b) to release the IP address type ipconfig/release and hit Efriendship. c. in order to renew the IP address type ipconfig/renew and press on Enter. Method 2: If the previous step fails, follow the steps in the link: Having trouble accessing the wifi via the iphone, have wireless router wrt110 I'm having a problem to access internet by wifi on my iphone. I have recently upgraded to Windows 7, but were able to access the front and now all of a sudden get a "unable to join the network" error. Does anyone have an idea why, or how I can go about fixing this problem? Thanks for the time. You can try to update the drivers for your wireless card with your computer, and then try to connect to your wireless network. Factory reset N300 WIRELESS Cable Modem Router and now can't access the internet via a browser I have reset my modem/router to factory reset through my laptop to try to solve a problem. Now it will not allow Internet access through browsers at all, but I can still ping via the CMD prompt .. After a couple of hours trying to solve this problem, I solved the problem by logging into the router... tab basically fixed IP/DNS auto and back to auto settings once again... He was somehow glitches. Hello. I restarted yesterday a machine resulting in RDP no longer works. I can access via VNC viewer. Any idea that it might be? BR Rudi. Use telnet.exe to know if port 3389 is always on the host computer. Start on the host of the RDP, then go back to your own machine. Cannot access the internet via Blackberry 10 Simulator... In fact, I'm in the workplace... There are a lot of restrictions are there... every time that I'm trying to access internet from the blackberry browser 10 Simulator... He rasises an error which is unavailable to the network (proxy is enabled). When I connect the pc even to open the network while I am able to browse internet Simulator itself... then I came to know that the proxy server is not bypassing the url generated from the Simulator... can someone suggest a good answer to work with... 10 BlackBerry Simulator does not support connections via a proxy server. This looks like what you see. FFx 37.0.2 the panels preferably are cut sometimes I can't use them. Some of the panels preferably are the right size and not every choice. I noticed this and discovered on "refreshing" Firefox, so I tried that and it is fixed at the start, so I was able to reset, but now a couple days later, I noticed the same proble HP Deskjet 1050a: printer turns is not on Printer was working perfectly this morning. I pulled it for use at the moment and it will not turn on. When it is plugged into the connector, there is a green light, but the printer is not the light upward. I pressed the power button and there is no HP ENVY laptop laptop 15-j153nx: Add SSD Hello I can add a SSD, and more current I TB HARD drive (more hybrid 8 GB SSD), to my laptop HP ENVY 15-j153nx? If so, what size/dimension, storage capacity, or maybe too much brand? Specifications of my laptop are: HP Envy 15-j153nx, computer laptop Please help with the Trib BIOS code. Thank you! the code that appeared was 85936842 pleas help me BlackBerry Q10 delete Emails from the server After downloading the latest version of the software - 10.2.1.2102, when deleting an e-mail, a message appears asking me to delete the message from my device only, or from the server as well. I clicked on Do not show this message again. Now when I deSimilar Questions
CHKDSK shows the hard drive has no bad points and the system works fine in Safe Mode.
No idea how to deal to freeze shortly after startup? Even McAfee should be started. No idea what order to these programs.
I've already eliminated at least 10 programs that were part of the start-up, after executing six miracle of Microsoft Diagnostics.
http://support.Microsoft.com/kb/929135
In fact. I downloaded the latest version of PMB and was able to import videos from cam. Once imported, I formatted the drive, then it pops up on the desktop as usual.
For me, it wa weird experience and have no logical explanation.
http://AdultFriendFinder.com/go/g1110961-PMO
not once have I ever accessed this site and it doesn't show up in the browser historyThis has happened
You must use all of the programs, because each detect different malware.
Make sure that you update each program to get the latest version of the database.
http://www.superantispyware.com/ - SuperAntispyware
http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
..........
See also 'Spyware on Windows': http://kb.mozillazine.org/Popups_not_blocked
Is it possible to access the RPD through Enterprise Manager, instead of the Office Administration tool? How to get to the RPD through the EM? I went at the request of base etc and did download it (http://docs.oracle.com/cd/E21764_01/bi.1111/e10541/configrepos.htm#CIHDFCJJ), but can we open the RPD and work with her to the MA?
Thanks for your time and your help. Maybe you are looking for