To connect to the desktop from the internet view

Hi all

I recently installed a view connection Server 5.0 and a manual pool with a single desktop computer in order to access my VMware infrastructure while I'm not at home.

I redirected the port 443 and 4172 access to connect to the server view and I am able to authenticate but the customer view freezes when I connect to the desktop computer because she needs the internal ip address of the office.

I don't understand the principle of the use of the customer in view of the internet while each connection to the servers or office uses the internal ip or FQDN address. What did I wrong? What should I do to just plug in my office to view with the client from the internet?

You must activate the tunnel and the tunnel of PCoIP on the broker for connections (on the admin interface > servers > Connection Broker) and specify the external URL (that you access from internet. for example, vdi.home.com, not the host name internal.)

You must also specify the external IP address. Is that you expose to the outside.

Linjo

Tags: VMware

Similar Questions

  • I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

    Hello

    I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
    Any suggestions?
    original title: connectivity Limeted

    The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

    Your messages are a bit terse, but if I understand correctly

    • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
    • All but one of these computers can reach successfully from the Internet via the router.
    • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
    • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
    • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
    • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

    Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

    Open a command prompt window (start > run > cmd > OK)
    Type the following lines and press ENTER after each line

    Netsh reset winsock catalog
    netsh int ip reset c:\resetlog.txt

    Close the command prompt window and restart the computer.

  • "The account specified for this service is different from the account specified for other services running in the same process" while trying to connect to the internet.

    Original title: the account specified for this service is different from the account specified for other services running in the same process

    while trying to connect to internet, I get the message "connection status: unknown the account specified for this service is different from the account specified for other services running in the same process" that you start happens out of the blue. When I run the diagnostic and repair tool it says that Windows cannot resolve the problem, contact admin or your ISP. I know that my internet service works very well. I am currently on an e-machine running Windows Vista Edition Home Premium and it connects without problems. My problem is that my most recent top of office (gateway also on Windows Vista Home Premium) receives connection problems. IM connected to the internet (DSL) with the ethernet cable from the Yukon. All the lights are green on the wireless gateway, so I know that the service is very good. Strange thing I noticed, when I go to network status and share and view Gateway desktop computer shows the "Yukon Ethernet controller" as the connection while the e-machine device says Im using "Intel (R) PRO/100VE Network Connection" Im using the same cable (Yukon) and put in place for both computers, so I was wondering what that was all too. Any help is appreciated.

    Hello

    Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet.

    1. have there been recent changes to the computer before the show?

    2. the problem occurs in safe mode with networking?

    Please go ahead and follow the steps mentioned and later a update on the State of the question.

    Method 1: Wi - Fi and in Windows network connection issues:

    http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

    Additional information:

    The problems of Internet connection:
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    Please follow these recommended steps and post if you still experience the problem.

  • Error message - "You must be connected to the Internet to play songs from music to Apple."

    I'm running OS X version 10.9.5 with iTunes version 12.3.1.23.

    When I try to listen to songs from Apple's music in my iTunes Music tab, I get this error message: "the [song name] song cannot be read because you are not connected to the internet. You must be connected to the Internet to play songs from Apple's music. »

    I am connected to the internet. Internet works fine for web browsing. In addition, all the other features of iTunes and Apple music work correctly (including the features that require you to have an internet connection).

    Has anyone received this error message or know of a way to solve the problem?

    Thank you.

    Read this previous thread Support Apple...

    Apple music will not play the song as not connected to the internet

  • I deleted a virus from my computer this morning with Security Essentials, now I can't connect to the internet.

    I deleted a virus from my computer this morning with security essentials, now I can't connect to the internet. The connection icon in the lower right corner of the screen says I am connected and the signal strength is 'very good', but I can't go online. The error message I receive when I right click and 'fix' the connection says: "failed to query TCP/IP connection parameters. Cannot continue. " For assistance, contact the person who manages your network. How can I fix it? The computer is a HP Pavilion dv2000.

    original title: can't get online

    Hello BurnBurn,

    I suggest you to re-installing the driver for your network card. This may involve completely un-installing it and re - install:
  • My wireless on my laptop will read the files on my desktop but I can't connect to the internet, my lapto electrician iI unless other computers work well

    My wireless on my laptop will read the files on my desktop but I can't connect to the internet, hard wire my laptop iI unless other computers work fine

    The following diagnostic information:

    1. Connect your laptop wireless so that you can "read the files on your desktop."
    2. Open a command prompt window (start > run > cmd > OK)
    3. Type the following command in the black command prompt window and press enter

      ipconfig/all > "% userprofile%\Desktop\testdata.txt".

    4. Let the window open orders and "hard wire" your laptop to connect to Internet
    5. Type the following commands in the black command prompt window and press ENTER after each one

      ipconfig/all > "% userprofile%\Desktop\testdata.txt".
      Notepad '% userprofile%\Desktop\testdata.txt '.

    6. Copy and paste the contents of the testdata.txt file into your answer here

    Please note that there are 2 for the second command ipconfig > characters.

    You can close and remove testdata.txt (which is located on your desktop) and close the command prompt window.

  • I recently changed internet service providers and now my Wired desktop can't connect to the internet.

    I recently changed internet service providers and now my Wired desktop can't connect to the internet.  I noticed that the connection is showing 'Automatic private address' can I connect all my fine wireless devices.  I did extensive troubleshooting with my service provider, but they suggest that my master's degree network adapter must be replaced.  I updated the driver, and the device manager says it's working properly. If I connect the same wire for my laptop, it works fine.  This is just my office.  Any ideas how can I fix?

    Hello

    Follow the steps in the KB article below and see if that fixes the problem.

    How to troubleshoot possible causes of Internet connection problems in Windows XP
    http://support.Microsoft.com/kb/314095

  • My desktop under Vista Home Premium does not connect to the internet.

    I have an Acer Aspire X 1200 desktop equipped with a NVIDIA NForce network controller. About 1 week ago I was browsing the internet, Norton anti-virus popped up and told me to renew my subscription. Now, I've never had Norton on my computer and when you click Remind Me later, my internet crashed. Now the whenever I plug my ethernet cable in the box, it connects to my router Motorola 5BS101 surfboard, but it does not connect to the Internet. I am running Windows Vista Home Premium. I tried to run malware programs remover, thinking it was a malware, nothing done. I tried to run to remove virus and nothing. I tried to change the IP address to my my laptop was broadcasting, because the internet runs on it, but no results. When using the command prompt to find out what the problem is, it says the active IP routing: routing WINS unactivated: No. looking at the stats of network adapters, it says active DHCP: No. address IPv6 local link: fe80::15f9:58e2:c2d8:66e7 10%
    Autoconfiguration IPv4: 169.254.102.231. Also using ipconfig / renew, said the message DHCP is not enabled.

    Are you sure you never had a Norton trial subscription on your computer?

    Norton will do strange things.

    http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

    Try to use the Norton removal tool.

    The computer you are using now if you have an Internet connection with the other > download / save > copy to Flash Drive > transfer / install it and launch it on the other computer.

    See you soon.

    Mick Murphy - Microsoft partner

  • Unable to connect to the internet from the Standard user account.

    Original title: query on standard user accounts

    I created a standard user account, but I can't connect to internet, my administrator account is correct, what do I do?

    Hi MaxQG,

    1. what happens when you try to access the Internet from the standard user account?

    2. you receive messages or error codes?

    3. have you ever connect to the Internet from the standard user account?

    You can check if there are parental controls together to prevent the user to access the Internet. You can see the bottom of the article for more information on this:

    What can I control with Parental controls?

    You can also create a new user profile and check if you are able to navigate new user account.

    Create a new user account

    If you are not faced with the same question in a new user account, you can check the link below and use the steps provided to screw a corrupted user profile
    Difficulty of a corrupted user profile

  • When I reinstall windows from my dell disk, everything is great and there are no programs. Also, I can't connect to the Internet.

    Good so I bought a Dell Inspiron of the 620 years for the game and I had to reinstall Windows 7 on a drive I ordered from dell. So I reinstalled Windows 7 and now I have a lot of problems. So first of all it seems very strange, the taskbar is not transparent and all the buttons are very weird. Also, there are no programs in the start menu. Secondly, it is said there is no Internet connection available, but I plugged in everything. I can also connect to the Internet on other PCs as my laptop. Any help is necessary, because I really want to return to the game. :)

    Hello

    When you reinstall the operating system, you must obtain the latest drivers for Windows 7 Support of Dell.

    Go to this link for your model, and then select the operating system > and then select the correct chart, drivers etc. :

    http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-620s

    For network adapter drivers, you can use the computer you are about to post here to go to the link above of Dell > download and save the software drivers for the office > transfer using a Flash drive and install it on the problem machine.

    Then use your game machine to get the rest.

    And here's how to reinstall using a disc from Dell:

    "How manually reinstall Windows 7 on a Dell computer.

    http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=&l=&s=&docid=266457

    You will need

    • Dell operating system installation disc
    • Dell Resource CD/DVD (also available on the page Dell drivers and downloads )
    • Any software and/or the documentation of your connection to the internet service
    • Any application install disks
    • All install disks for external (such as a printer) and added to your Dell devices after the purchase of internal devices

    See you soon.

  • After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

    After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

    but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

    How to fix this?

    Glad to hear it.

    If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.
  • Problems connecting to the internet from my laptop

    My phone (Samsung A NP550P5C-S02AU running windows 7 Home premium) does not connect to the modem (which is a D-link DSL-2740 b - F1)

    For the past few weeks that I was able to fix this by resetting the modem/restart the laptop and I also did a full restore on the computer laptop but also completely reset the modem and updated the firmware. I also tried two different wireless, WPA and WPA2 security settings that solved the problem (although surprisingly, it worked for a few days during the passage of to WPA). For the last two days the laptop was not able to connect to the internet outside a few times where the connection lasted 2-5 minutes. We have several computers and portable devices in the House who seem to have no problem connecting to the internet, so I'm not sure of what could be the problem.

    Any advice would be appreciated

    Hello

    Thanks for posting your query in Microsoft Community.

    I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

    Method 1
    I suggest you try the steps from the following link:

    Why can't I connect to the Internet?
    http://Windows.Microsoft.com/en-in/Windows7/why-can-t-I-connect-to-the-Internet

    Method 2
    I suggest you to update the drivers for the network card and card wireless from following link:
    http://www.Samsung.com/au/support/model/NP550P5C-S02AU-downloads

    Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

  • Is connected to the Internet, but cannot use the Compaq Presario SR5123WM desktop PC

    Product name & #: Compaq Presario SR5123WM desktop PC (GC660AA-ABA)
    Operating system: Windows Vista Home Premium 32
    No only error message when Internet Explorer does not display the page or iTunes can't find any connection network (any application that requires an Internet connection).

    No changes were made to the system.

    I have the dial-up connection. The Bureau uses the Modem - PCI Soft Data Fax Modem with SmartCP (COM3).

    Once I start the computer, log in to my user and connect to the Internet, I click on Internet Explorer and type in Google to see if it would work. It is said that "Internet Explorer cannot display the webpage". For iTunes, he would say "iTunes has not to connect to the iTunes Store." Make sure your network connection is active and try again. »

    I tried all solutions online and by phone. I reset netsh int ip / winsock. I reset Internet Explorer options. Nothing works.

    What is strange, is that the Internet connection works well on my laptop (using Conexant D110 MDC V.92 Modem (COM3)).

    It would be GREAT if you could help me find a solution to this problem, because this has happened for months, and I'm tired of waiting. I put all my hopes on you.

    You may be able to do a system restore if the original HP partition is always on the computer.

    Here is a document detailing the steps:

    Perform a recovery of the system (Windows Vista) HP

  • Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two in

    Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two inaccurate statements. I GET NOTHING BUT NOTHING ADOBE 'SUPPORT '.  How can I get just the program open and running?

    Check your hosts file.

    help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • How to go from "offline" Mode when you use Firefox on an android device that is connected to the internet through Bluetooth.

    I have been using my tf300. Whenever I try to open Firefox on the Tablet while using a Bluetooth connection, the only screen that Firefox opens is a generic screen displaying 'Offline Mode '. Is there a way to switch to online mode or I am able to use the browser on a wireless signal?

    Could you clarify - are other applications can connect to the internet when you are logged in this mode?

Maybe you are looking for