To count the number of while loops, you just attach a DBL indicator for the little that I framed in the while loop of the program?

I followed just one example in a book as while loops and I want to just make sure that I haven't missed something simple. My program is attached

Hi type'ssteel,

I can't open your vi at the moment, but as you say, you can use the terminal i. For iterations, you must add 1 to it. I start with 0.

Mike

Tags: NI Software

Similar Questions

you just buy and update installed for elements but app will not take my serial No.

Just bought and installed udate for elements mut app does not accept the serial No.

Hi [email protected],

Please see the Ko: http://helpx.adobe.com/x-productkb/global/my-serial-number-doesn ' t - work.html .

Kind regards

Romit Sinha

I can no longer import clips for my external drives... final cut gives me the ability to import on my hard drive... you just buy a new drive for G and I have the same problem

I used to be able to import clips on my external drive of G and change events I had saved on the drive, but this problem started after I tried to import video from a camcorder sony I had connected the G drive. Now when I try to import the clips, it don't give me the possibility to choose one of my records G, I can only import directly on my hard drive. I can't open the previous events I backed up on my external drives.

What version of FCP X?

Russ

How to count the number of updates in a loop Forall

Hi friends

I want to know is - it possible to count the number of updates occurred in FORALL. I share the codes below. His only return the iteration number. If I spend 5 through the values of the PARAMETERS and 2 updates the values in the table then return 5 instead of 2. My requirement is to count the number of updates have taken place and return this value to OUTPUT parameter. If possible, please share codes. Thank you very much...

CREATE OR REPLACE PROCEDURE UPDATE_PROCESS_RATE 
          (
           V_HOSPITAL_ID IN HOSPITAL_SERVICE_MASTER.HOSPITAL_ID%TYPE,
           V_USER IN VARCHAR2,
           V_DATE IN DATE,
           V_PROCESS_ID  IN VARR_ARRAY,
           V_PROCESS_RATE IN NUM_ARRAY,
           V_NUM OUT NUMBER
           )


            IS

                V_ERROR_CODE NUMBER(15);
                V_ERROR_MSG VARCHAR2(200);
                V_ARRAY_ID NUMBER(10,2);
                V_TOTAL NUMBER:=0;                                            
   BEGIN
              SAVEPOINT Sp1;
         BEGIN
   
               FORALL i IN V_PROCESS_RATE.FIRST..V_PROCESS_RATE.LAST
             
                           UPDATE HOSPITAL_SUBSERVICE_PROCESS M 
                           SET M.PROCESS_CHARGE=V_PROCESS_RATE(i)
                           WHERE M.HOSPITAL_ID=V_HOSPITAL_ID
                           AND M.HOSPITAL_PROCESS_ID =V_PROCESS_ID(i);
                                                    
               FOR i IN V_PROCESS_RATE.FIRST..V_PROCESS_RATE.LAST LOOP
            
                   V_TOTAL:=V_TOTAL + SQL%BULK_ROWCOUNT(i);
               End loop;
           
                   COMMIT;  
                   V_NUM:=V_TOTAL;

IndiMinds wrote:

But my requirement is: it must count the update only when it detects a different value from array. When it detects a different value in the table must be updated and count it and if the update of the table value is similar the TI should not count it.

For example, if the V_PROCESS_RATE table have these 3 values (10,20,30) and we need to update these 3 values with (10,40,50), so no update, it should return is 2 not 3.

Thank you

And then don't update these lines, change your update statement

UPDATE HOSPITAL_SUBSERVICE_PROCESS M
SET M.PROCESS_CHARGE=V_PROCESS_RATE(i)
WHERE M.HOSPITAL_ID=V_HOSPITAL_ID
AND M.HOSPITAL_PROCESS_ID =V_PROCESS_ID(i)
AND DECODE(M.PROCESS_CHARGE,V_PROCESS_RATE(i),0,1) = 1;

How to count the number of updates in a loop?

Hello world
Warm greetings
I'm using Oracle 11 g. I want to count the number of updates inside a loop. If updating not only one value in the table, then it should return 0 otherwise, it should count the number of updates and return it. I used SQL % ROWCOUNT, but returning an incorrect value.
I share the sample codes.
```
procedure proc1 (vid IN Number, vprocessId IN varr_varray, vCharge IN vnum_varray,vcnt OUT)
IS
vFlag Number(3):=0;
Begin


vflag:=vprocessId.FIRST;
If vflag is not null then
For vprocessId.FIRST..vprocessId.LAST
Loop
Update table set colCharge=vCharge(i)
where colId=vid
and  colProcessId= vprocessId(i);




End Loop
End;
```
Please close the question if it has been answered.

Count the number of times you click on hot spots.

The specific problem I'm having right now counts the number of times where an is clicked a hotspot. I have four hot spots and need to track the number of times where is clicked on each hotspot. The variable "tent" gives me the total for the whole interaction. Since they are not considered, I can't use correct or wrong. You have any ideas? I would use the "tries@title" icon, but all the hotspots are contained in the icon interaction so that no longer works.
Thanks for any help you can provide,

I often structured interactions so that I can enjoy the variable 'ChoiceNumber. If your access points are all consecutive and they are the first things to the right of the interaction, you can use a variable from the list.

[ClickList: =]

Then at the top of each of your answers, you can use

ClickList [ChoiceNumber]: = ClickList [ChoiceNumber] + 1

Each task in ClickList is taken into account the time that spot has been used and you can use the sum to get the total of all tasks. If they can not be the first thing then you can always use an offset value... ClickList [ChoiceNumber-4]: = ClickList [ChoiceNumber-4] + 1

HTH,

Mike

Scripting: Count the number of selected pixels (non-quadrangle) or alternative approach

Is it possible to count the number of pixels in a selection that is not a quadrilateral? For example, if I have cntl - click on the thumbnail of a text layer, I would like to know how many pixels is selected.
This application, if anyone has another approach to try...
My goal is the place the text at some point where it covers do not all lines (or, Alternatively, the place where it covers the smallest number of pixels line). My approach is to insert a text in red to the desired location, apply a BlendMode.Multiply to the text. The number of Red pixels always on the screen will show how many pixels line I'm concealing. Then I move the text into a region and check the histogram in 76 index (which is 255,0,0), find the point with the highest number of red (meaning concealing pixels less line) and finally move the text at that location. See the code snippet below:
var bestCX = cX;
var bestCY = cY;
var bestPixelDensity = - 1;
var pixelDensity = 0;
var searchRegionWidth = 3000;
var searchRegionHeight = 2000;
loop through an area 3000 x 2000 around where you want
for (var x = cX - searchRegionWidth/2; x < cX + searchRegionWidth/2; x ++)
{
for (var y = cY - searchRegionHeight/2; y < cY + (searchRegionHeight/2); y ++)
{
textItemRef.position = new Array (x, y);
pixelDensity = myDocument.histogram [76]; index of 255,0,0 (red)
If this point is greater than the previous highest density, use it instead.
if(pixelDensity > bestPixelDensity)
{
bestCX = x;
bestCY = y;
bestPixelDensity = pixelDensity;
}
}
}
move text in the best location found
textItemRef.position = new Array (bestCX, bestCY);
The problem is that the images I use are very large ((7000x7000px) for each histogram control takes a few seconds and I really need to move in a fairly large region (3000 x 2000) to find the best place.) I think that it is perhaps faster if I'm not using the histogram at all, and instead each time that I move the text, I select the text and see how many points is in the selection. Any help or alternative approaches would be great!

I don't know the answer, the only thing I can think is the whole of the histogram to the selection and treatment of the histogram of the selected area.

Automatically count the total number of steps

I have a procedure with x steps. In the title manually type us the total number of steps. As you can understand this process often translates into a failure, where the number in the title does not match the actual number of steps.

Is there a solution for automatically Indesign to count the steps below a certain style of paragraph and add the title number. I did find something similar.

For example, where '5' in the title is automatically generated:

How to count (5 steps)

Be patient, start whispering 'a '.
Then mentally count to two...
... three
... four
Crying all of a sudden 'five' and pretend that nothing takes place.

Thanks in advance

This can be done very easily by the script. I wrote it while drinking my coffee in the morning.

Front

After

I don't know what style names that you use so I used 'Header' and 'steps '. Change them to your style of the script name (in a text editor - Notepad for example, ESTK):

If you add / remove certain steps, run the script again and it will update the numbers.

Here is the script and here is an example document for the test.

DISCLAIMER: I did not see your documents, so can't promise it will work for you, as it is.

/* Copyright 2014, Kasyan Servetsky
June 4, 2014
Written by Kasyan Servetsky
http://www.kasyan.ho.com.ua
e-mail: [email protected] */
//======================================================================================
var scriptName = "Count number of steps - 1.1",
doc;

PreCheck();

//===================================== FUNCTIONS ======================================
function Main() {
    var foundItem, header, lastPar, num;

    app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.NOTHING;
    app.findGrepPreferences.findWhat = "(?s).+";
    app.findGrepPreferences.appliedParagraphStyle = "Steps";
    var foundItems = doc.findGrep(true);
    if (foundItems.length == 0) ErrorExit("Found nothing", true);

    for (var i = 0; i < foundItems.length; i++) {
        foundItem = foundItems[i];
        if (foundItem.paragraphs.length == 0) continue;
        header = foundItem.parentStory.paragraphs.previousItem(foundItem.paragraphs[0]);
        if (header.appliedParagraphStyle.name != "Header") continue;
        lastPar = foundItem.paragraphs[-1];
        num = lastPar.numberingResultNumber;
        if (num == -1) continue;
        InsertNum(header, num);
    }

    app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.NOTHING;
}
//--------------------------------------------------------------------------------------------------------------------------------------------------------
function InsertNum(header, num) {
    app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.NOTHING;
    app.findGrepPreferences.findWhat = "( \\()(\\d+)( Steps\\))$";
    app.changeGrepPreferences.changeTo = "$1" + num + "$3";
    app.findGrepPreferences.appliedParagraphStyle = "Header";
    var changed = header.changeGrep();

    if (changed.length == 0) {
        header.insertionPoints[-2].contents = " (" + num + " Steps)";
    }
}
//--------------------------------------------------------------------------------------------------------------------------------------------------------
function PreCheck() {
    if (app.documents.length == 0) ErrorExit("Please open a document and try again.", true);
    doc = app.activeDocument;
    if (!app.activeDocument.saved) ErrorExit("The current document has not been saved since it was created. Please save the document and try again.", true);
    Main();
}
//--------------------------------------------------------------------------------------------------------------------------------------------------------
function ErrorExit(error, icon) {
    alert(error, scriptName, icon);
    exit();
}
//--------------------------------------------------------------------------------------------------------------------------------------------------------

Trying to count the number of network adapters on the virtual machines

Hi all
Have tried to create a script to simply count the number of network adapters in a virtual machine? In all honesty, don't have a clue where to start? I don't know there are a number of 'ownership' but can't seem to figure out how I can integrate this counting cards network
Thank you very MUCH in advance
Munster

Try this way
```
$vms = Get-VM

foreach ($vm in $vms)
{
     $vm | Select @{N = "VMName"; E = {$vm.name} },
          @{N = "VMNICCount"; E = {$vm.Networkadapters.count} }
}
```
Inside of the foreach loop, you select in each $vm name and County NIC.

____________

Blog: LucD notes

Twitter: lucd22

How to count the number of data records?

Hey guys, how to count the number of records, I had on a data object variable?
Im having a result of sql query in a variable like this:
oDB.resolveNode("#command").query.select.value = "SELECT * FROM Customers WHERE CliNombre LIKE ' % ' + input1 +" %' ";
oDB.open ();
oDB.first ();
So I need to count the number of records retrieved by this SQL query at the moment. Help please

Then move the cursor back to the first record after you have your account.

There is a keyword count in SQL that will allow you to get the account of your request. You can run that first - get your account, and then run the actual query to get the Recordset. This would require a separate data connection. Some examples of code.

var xfa.event.newText = inName;
If (inName == "") {}
App.Alert ("you must enter a name--try again!")
}
var nIndex = 0;
While (xfa.sourceSet.nodes.item (nIndex) .name! = "DataConnection2")
{
nIndex ++;
}

oDB = xfa.sourceSet.nodes.item (nIndex) .racing var (1); pertaining to the specified data connection node
App.Alert (ODB.saveXML ("Pretty"));

var nIndex = 0;
While (xfa.sourceSet.nodes.item (nIndex) .name! = "DataConnection3")
{
nIndex ++;
}
var oDBCount = xfa.sourceSet.nodes.item (nIndex) .racing (1); pertaining to the specified data connection node
Configure sql call DB to get the number of records that match the criteria

oDBCount.nodes.item (1).query.setAttribute ("text", "commandType");
oDBCount.nodes.item (1).query.select.nodes.item (0) .value = "Select count (*) from table1 where AcctNumber = '" + inName + "'";
oDBCount.open)
oDBCount.close)

Configure sql call DB to get the specified employee number

oDB.nodes.item (1).query.setAttribute ("text", "commandType");
oDB.nodes.item (1).query.select.nodes.item (0) .value = "Select * from table1 where AcctNumber = '" + inName + "'";
App.Alert (ODB. Nodes.Item (1) .saveXML ("Pretty"));

now connect to the DB and get a recording
oDB.open)
oDB.close ();

Note the SQL command use the keyword count (take a look at the oDBCount section). This will return a number of return to the cllaer. When I set up the data connection, a node count (*) that appeared there. I dragged to the form and it has created a field called count that the onus at this node. When the query is executed, the number of resulting records returns to this field. You can have hidden it so that your users can not see it and also to change the binding votes to zero, so it is not included in the data file that is submitted when the form is complete.

Paul

Count the number of lines being written?

I am writing a file using the procedure UTL_FILE. One of the lines will contain a count of all the lines in the file. What is the best way to get this number?

Thanks in advance

so I guess you can do something like

declare
   cnt pls_integer := 5; -- if you want to count the records outside the loop too
begin
   write_security_record;
   write_file_header;
   write_company;
   loop
      cnt := cnt + 1;
      write_detail;
   end loop;
   write_control;
   write_file_control (cnt);
end;
/

How to count the number of conditionally highlight cells in a column or row

I'm working on a table to identify problems with my credit rating. So, I have a column that indicates the due date on the invoice and G that contains the date to which I made the payment.

I'm trying to follow how many times I'm late with payments. I want to improve.

So if the G column is later than column D, both with the Date formatting. So, now I've highlighted cells and I want to summarize for the year, how many times I was late payments.

I thought a column G to count the number of days before or after that back I was with payments. But if the sum, it only gives me no useful information. I guess I could count the number of cells with values less than 0.

I prefer to be able to put in the summary column for G something that said 0-12 years ago has highlighted cells in the column.

Thank you

You can not count based on sharing or formatting. You can, however, be based on the same conditions.

There are functions:

COUNTIF() counties based on a condition is true

and

COUNTIFS() based on several conditions being true

= NB. If

Here is a way. IT will take an additional column that calculates the "delay" in the days of a payment

the first two lines are the lines of header

H3 = IF (COUNTA (D3, G3) > 1, MAX ((G3−D3) DUR2DAYS, 0), "")

It's shorthand dethrone select cell H3, and type (or copy and paste it here) the formula:

= IF (COUNTA (D3, G3) > 1, MAX ((G3−D3) DUR2DAYS, 0), "")

Now select cell H3, copy

Select the H3 cells at the end of column H, dough

H1 = "payments late =" & COUNTIF(H,">0")

How to count the number of edges using counters SMU-6363

Hello

I'm counting the number of edges in a test signal in a duration of 50 Ms I use the SMU-6363 map and connect to the TRC test signals 0 SRC (PFI 8). Is that a correct connection? What else do I need hardware wise be a correct set for this application?

Thank you

Jeet

Hi Jeet,

This configuration is correct. Hardware wise, that's all you need to do.

Kind regards

Jorge Fernandez
Technical sales engineer
National Instruments
____________________________________________
Certified LabVIEW Associate Developer (CLAD)

Count the number of 1 is present in digital waveforms obtained by converting the pulse signals.

Hello

I use Analogtodigital.Vi to convert the pulse of the sequences in digital.signals.I am able to get the representation of digital waveforms of impulses.

But how to count the number of 1 is present in the converted digital waveform. I want to count the number of 1 is present in the digital waveform converted.

Thanks in advance.

Have you tried the block scheme of similar to the Digital.vi of opening?

It creates an array 2D uncompressed 1 and 0, which is the binary 16 bits A/D conversion of each element in the array Y of the input waveform. You can use the DWDT digital Array.vi Boolean to convert a 2D Boolean table. Then convert Boolean values to 1.0 and summarize the array of integers. The sum must be the number of 1 bits in the digital waveforms.

Lynn

Note: The VI attached is saved in version 8.6. When I have it saved for the previous Version a warning was generated about the possible differences in the versions. Let me know if it doesn't work, and you are using which version of LV.

Boolean switch until the released counter + the number of cycles

Hi, I want to use a Boolean command button (switch release) to rely on a specific value and when obtaining this value (while pressing continuously the button) to turn on an led. If I release this Boolean button, I want to count the time until a value and then to turn off the light, like a hand for a hand detection dry.

I was thinking of using the number of cycles in a sequence of plate with a delay for the time being I want to split on a matter of true or false, but the problem is that the count of the number of cycles is continuous and not slaughter not on the specific value I want for the power button truning the seeing.

Any help?

TNX

Guy

To count the number of while loops, you just attach a DBL indicator for the little that I framed in the while loop of the program?

Similar Questions

Maybe you are looking for