To delete my messages on Thunderbird as the computer goes to a friend

Similar Questions

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• The event GWX.exe messages must remain on the computer after you made the reservation for a copy and agree to receive their copy?

  The event GWX.exe messages must remain on the computer after you made the reservation for a copy and agree to receive their copy?  It certainly is learning to be OVERLOAD on these messages and would like to know if it is OK to remove them and what to do to STOP these messages.  I asked the program and I've been accepted/approved/reassured that will ship a copy - JUST WANT TO KNOW IF I CAN REMOVE THIS sort of THINGS NOW, OR should she REMAIN ON MY COMPUTER?  It's the only question I have that needs to be answered. Thank you

  ybliku2

  Since early may, Microsoft began providing updates prerequisite for these systems for the upgrade. Known as the get Windows 10 app (GXW) this KB update installs the mechanisms to verify your system readiness and download Windows 10 through Windows Update. Users will see a notification added to the taskbar allowing users of the availability of the operating systems and of the possibility to book the update and download automatically on July 29^th 2015.

  You can also download Windows 10 as one. ISO file and do the upgrade manually:

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

• "The parameter is incorrect" Error Message is displayed on the computer

  I'm running Windows 7 Home Pro on an Asus laptop and recently decided to add my old printer USB, HP Oficejet v40, to our network via a print server, LPR Networking USB wireless home. The Installer seems to fill correctly, and my printer appears in the list of available network printers (I alone). However, when I try to print wireless, I get one or more error messages. The first and the most persistent are: a StartDocPrinter call was not issued. Sometimes (not always) this is accompanied by another popup error: the parameter is incorrect. In each case, the document I am trying to print is no longer in effect. My USB utility Server network sometimes prints, and sometimes it is available. Running the printer troubleshooter cannot correct the problem (s) and always results in the following error: printer HP Officejet V40-P05d0443eb can be contacted via the network. If I connect the printer directly to my laptop, USB port, it prints as expected.

  The print driver is up-to-date. I tried to uninstall and reinstall the printer and print server and have also tried to reset the print server and the router, to anything will do. Any help to fix these problems is greatly appreciated!

  Original title: error: A StartDocPrinter call was not issued.

  Hello

  Thanks for posting your query in Microsoft Community.

   

  You can consult the following articles and check if they help:

  Wireless printing Center Resolution of problems
  http://WWW8.HP.com/us/en/campaigns/wireless-printing-Center/Troubleshooting.html
   
  "The parameter is incorrect" Error Message is displayed on the computer
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c03283238

  For the error: "the printer cannot be contacted over the network",
  refer to suggestions provided by Meghmala responded on May 28, 2010.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/printer-cannot-be-contacted-over-the-network-error/a4318308-3D16-44D4-bac8-7fdd10a83208
   
  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• What would happen if the computer goes into hibernation mode, but there is no free space on hard drive?

  What would happen if the computer goes into hibernation mode, but there is no free space on hard drive?

  No doubt a failure to the hibernation or a nasty system crash - not sure and not willing to risk a stable system there.  :-)

• Tried to restore to an earlier date, but whenever the computer goes through the process, but ends by saying that he could not make the changes. My system is XP Professional.

  McAfee, updated yesterday, Saturday, and now I have problems. Tried to restore to an earlier date, but whenever the computer goes through the process, but ends by saying that he could not make the changes. My system is XP Professional.

  Hello
  Have you done that you are connected under an administrator account?

• My computer is connected to a router via ethernet but my wifi stops when the computer goes to sleep. How can I stop this?

  I just installed the router today.  Wifi a works fine until the computer goes to sleep, then my wifi for my Ipad, nook etc off.  This should not be the case.  Why would he do that?

  Hello

  1. have there been recent changes to the system before the show?

  2 is the issue limited to Wi - Fi?

  Method:

  Follow these steps and check if that helps.

  (a) click Start, type Device Manager in the search box.

  (b) click on Device Manager , according to the results.

  (c) expand the wireless adapter, right click on the drivers listed.

  (d) click on Properties, click on the power management tab.

  (e) uncheck the option allows the computer to turn off this device to save power.

  (f) click apply, click OK.

  Let us know if it helps!

• When I delete a message in Thunderbird, it is not deleted from my POP3 server.

  I have account as"email on the server" settings and "until I have delete ' both checked. When I delete the email in Thunderbird version 24.4.0, enamel not get deleted on the pop server.

  If I create a filter and say "delete server" any e-mail that has a STAR status. Emails get deleted from the server when I run the filter messages.

  I don't think I should have to run a filter whenever I want to delete emails from the POP3 server.

  I do something wrong... any ideas?

  I found the answer on another forum by Tom Wijsman:

     Go to Options -> Advanced -> Config Editor.
  

     Find the Name mail.pop3.deleteFromServerOnMove
  

     Set it to True.
  

     True: Delete the copy of the message on the POP3 server if you move or delete the message.
  

     False(default): Only delete the copy of the message on the POP3 server if you delete the message.
  

  That of it, restart Thunderbird. You must press "Get Mail" whenever you want to synchronize with the mail server, so that you can to ensure that the messages in the application is in synchronization with the e-mail server.

  What follows is to highlight to perform the synchronization with the server. You will not see your message server after the initial download to Get Mail (new downloaded messages). Once you process your Inbox in Thunderbird to delete/move a new message, and then make another mail to get, which will remove messages previously downloaded on the server (phase).

  Note: If you have some old messages in your mailbox Thunderbird, they will not be deleted from the server. Delete them manually from the server. Therefore, all new messages you download, then treat (delete/move) and then synchronize up redoing Get Mail will BE deleted.
  share | improve this answer

  Tom Wijsman

• How to get back to the Inbox folder after deleting a message instead to open the next message?

  I don't want to open the next message in my Inbox, when I delete a message. I want to go back to the Inbox folder.

  I had the same problem, was driving me crazy until I found that I could enable a toolbar of menu by right-clicking on the toolbar and checking "menu bar". This brought menus that I was familiar with, including the "Tools". Then, I was able to apply these tips from the help system:

  Specify what happens to the message window when a message is deleted
  

  Location of the menu: tools | Options | Advanced | Read and display
  Check the "message close window/tab on move or delete.

• Do a right click on desktop freezes computer, Windows explore and Dr. Watson as time stop working. Only Ctrl + Alt + Delete can be used to reset the computer

  original title: right clicking on desktop freezes the computer, Windows explore and Dr. Watson times stop working.  Only Ctrl, Alt, Del to reset computer

  Make a right click on desktop freezes the computer.  Explorer Windows and Dr. Watson stop working. Only Ctrl, Alt, Del restarts computer

  Hi Ken1948,

  1. did you of recent changes on the computer?

  2. you receive the error message?

  3 when was the last time it was working fine?

  Check if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• off frequency message error when start the computer in normal mode

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hey pamyres

  you say not what led to what happens

  You must give information here to get help

  try a restore of the system in safe mode before your problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Walter, the time zone traveller

• Computer displays an update message whenever I start the computer

  For the last two days I get this message every time I start my computer. I have NOT run download it on and I also ran my AVG Antivirus, Ccleaner, and Malware Bytes and have nothing wrong with the computer. Any ideas?

  "updated found

  revision 8 of the 1.0 version is available. you want to download? »

  This is related to a software program called CoreTemp which shows the different statistics on the use of the CPU and the CPU temperature. On my machine (I'm on Windows 7), it also feeds Desktop Gadget of the same name.

  They recently released an update and it's associated update notification.

  

  If this small utility software is in your autostart then you will receive this notification every time that you open a session.

  By clicking 'Yes' will take you to their website where you will see a download link. It is a totally benign tool, I've been running for years and it is safe to install the update.

• I can put up the points of restoration, but when I try to restore at this point, I get a message that says that the computer is unable to restore at this point.

  I searched faq, but most deal with how set up points and not what to do when the computer cannot be restored to a point.  This computer is 5 years old and I set a restore point every day is there a file that must be emptied?

  Some security programs prevent changes to their file and must be configured to allow the restoration of the system work.  For example, if your computer has Norton Antivirus or Norton Internet Security, you must disable Norton product Tamper Protection before running the system restore: