To display the year when no data for this line

Similar Questions

• Memory management by displaying the large amount of data

  Hello

  I have a requirement to display the large amount of data on the front in table 2 & 7 graphic during the time period 100hrs for 3 channels, data read from strings must be written in the binary file, and then converted and displayed in front of the Panel for 3 channels respectively.

  If I get 36 samples after conversion for all hours, up to 83 h 2388 samples displayed in table and graphical data are thin and samples correspond exactly.

  After that 90 hours 45 minutes late is observed after theoretical calculation of samples, what could be the problem

  I have controller dual-core PXI8108 with 1 GB of ram

  As DFGray,

  says there is no problem with the RAM or display, problem with conversion (timming issue) if I am data conversion of large amount it takes even, compared to the conversion less amount of data. So I modifed so that each data point Sec 1 is convereted at once, problem solved

  Thanks for your replies

• How to display the clock (time and date) in the task bar at the bottom of the right hand of the computer

  I ask for help.

  I want to be able to display the clock (time and date) in the taskbar at the bottom right of the computer

  Hi FrankNikolich,

  Thanks for asking! I understand that you want to display the clock and date in the system tray.

  1. have there been recent changes to the system before the show?

  Follow these steps and check if that helps.

  (a) right click on the taskbar, click Properties, click Notifications.

  (b) click on the Customize tab, click on the System Turn On or OFF icons.

  (c) in the drop-down list, select Yes for the clock.

  (d) click OK.

  Answer us with the results. I'd be happy to help you further.

• Cannot display the trust policy custom created for attestation the attestation procedure level

  Cannot display the trust policy custom created for attestation the attestation procedure level

  Find the file updated for more information.

  Hi Pradeep and Fatih,

  This is no bug. I can only imagine without detailed information about the procedure of custom clearance and approval workflow custom.

  But each attestation procedure has an assigned table that defines what data will be documented, for example UNSAccountInUNSGroup. An Identity Manager can only assign strategies of the attestation procedure where each step of the approval workflow contains an approval procedure where the picture of the Attestation procedure is in the list of assigned to this approval process approval. (See screenshot) Verify that approval in your approval workflow steps are aligned to this requirement.

  

• How to display the ToolTip when the input text is disable

  How to display the ToolTip when the input text is disable?

  Just checked in FF and IE11, works fine for me (jdev 12.1.3)

  Dario

• How to get only the year of a date?

  I try to shoot only the year of a date and does not know how this can be done. I tried the SUBSTR function but its does not not how I think. What I want to do, it is write a condition indicating the year of birth of point = current year minus 23, I have a calc than the figures of the age of the difference in the date of birth and the current year, but I'd really like to just write a condition based just a years. Is this possible?

  Hello
  SUBSTR only works on a string. To extract parts of a date, you must use the TO_CHAR command.

  For the year, you would use this: TO_CHAR (the_date, 'YYYY')

  To_char takes 2 switches, the date to be handled and the part to be extracted, with the portion between apostrophes.

  Once you get used to manipulate dates as this other common areas are: DD - extracts the day of the month, MY snippet code to 3 characters for the month.

  For example, you can use this: TO_CHAR(sysdate,'DD-MON-YYYY') and it converts the current date, June 7, 2012 to June 7, 2012

  Hope this helps
  Best wishes
  Michael

• By connecting to Window Vista is errro ' configuration data for this product is damaged contact the support staff.

  1. I get this error before moving on to the windows vista login ' configuration data for this product is damaged contact the support staff "I tried repairing the system by using the Windows disk installation and chkdsk/f/r and none of the steps helped.
  2. on a different vista machine it keeps restarting on before we get to the opening of windows session, I managed to make system repair using the windows disc and he managed to survive but, unfortunately, after a couple of stop and restart, the same problem happens again.

  Kindly help on how I can make these problems disappear.

  Hello

  Method 1: Check to see if you can boot into safe mode. If you can start in safe mode, you can perform the clean boot and test functionality.

  Step 1: Check the functionality of the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If it works fine, you can check if the problem exists in a clean boot state.

  Step 2: Perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: If you are unable to boot into safe mode, try to Start the computer using the disk and recovery options, select command prompt, run System File Checker tool.

  How to access the System Recovery Options menu?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Download link for the tool (SFC.exe) System File Checker.

  http://support.Microsoft.com/kb/929833

  I hope this helps!

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...

• 30 to 99 daily Photoshop requires an internet connection. What is the amount of data for this connection?

  Photoshop needs an internet connection after 30 or 99 days. What is the transfer of data for this connection? I ask, because I'm going to work on a ship for a long time and ROAMING costs are very expensive. Maybe it's possible via a mobile phone connection?

  [Left non-technical Forum Lounge for cloud... forum] MOD]

  This is an open forum, not Adobe support... Click below to contact Adobe staff for help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• When you try to import photos, I get an error that says that the preview is not available for this file.

  When you try to import photos I get an error that says: Preview is not available for this file. Then when I try to download these files, a gray box returns for each photo with the name of the file, and this error message -Preview is not available for this file but no picture. The files are JPEG files. I use Lightroom CC help?

  Some additional information. I received these photos of my granddaughter of my son with Dropbox. I checked the files under properties and found that they were listed as "some blocked properties" so I checked the box to 'unlock' and click on apply. The blocked message went away. Then, I took the original photos out of the folder of file they were in. I went back to LR and made sure those grey boxes with the Preview is not available for this file was missing. Then I went to the new files with the status of unlock in a new folder and tried to import into LR... same thing happens again! UGH

  Hi rsobieski,

  Could you please copy the images of Dropbox in a new folder on the computer/pictures folder.

  Also, then try again to import images into Lightroom and also please check if you have read and write permissions on the images.

  Kind regards

  Tanuj

• "the site has encounter a problem and cannot display the page" Why am I seeing this whenever I try to access the center of update microsorf?

  "the site has encounter a problem and cannot display the page" Why am I seeing this whenever I try to access the center of update microsorf?

  Hello
   
  1 do you have service pack 3 installed on the computer?
   
  2. what was the recent change in hardware or software performed on the computer before the question?
   
  Please follow the links below to solve the problem.

  Method 1
   
  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  
  http://support.Microsoft.com/kb/883614
  
  Method 2

  Add the Windows Update Web sites to the trusted sites zone in Internet Explorer

  If you have verified that your firewall and antivirus are not causing the problem, try adding the following Web sites for the Microsoft Internet Explorer Trusted sites zone on the computer where you use Windows Update. After you have added the following Web sites to the Microsoft Internet Explorer trusted sites zone, run Windows Update. To run this method, follow these steps:

  a. start Internet Explorer.

  b. on the Tools menu, click Internet Options.

  c. click on the Security tab and then click on Trusted Sites.

  d. click Sites.

  e. Click to clear the requires a secure server (https :) for all sites in this zone check.)

  f. in box add this website to the zone, type each of the following Web site addresses and then click Add:

  o https://*.microsoft.com

  o https://download.windowsupdate.com

  o https://update.microsoft.com/windowsupdate

  o http://*.update.microsoft.com

  o https://*.update.microsoft.com

  o http://download.windowsupdate.com

  g. click closeand then click OK.

  h. visit the Windows Update Web site or the Microsoft Update Web site.

  I hope this helps.

• Can not activate win 8 error "the key provided is not for this edition of windows, use either windows 8 setup or enter an activation key for windows 8.

  OT: Cannot activate win 8 on my laptop due to the change of hard disk.

  Hi all

  I have a Samsung np550p5c-s05in and it came installed with 64-bit Windows 8, later, the hard drive developed a few problems and as I had guaranteed him, they were replaced by a new, but this one came with a victory 8 32-bit that is not enabled. Now, I got the product key of victory last 8 I had so I tried using them to activate, but an error came that said something like

  "The key provided is not for this edition of windows,

  Use the installer of windows 8 or enter an activation key 8 windows. »

  So it was logical that the key I had was for a 64-bit win 8, so I installed win 8 64 bits of an image file and then I repeated the same procedure to enter the key and the same error came once again.

  I would ask so you people to please help me with this, because I have no idea whatsoever what to do next.

  Thanks in advance,

  SamizZy

  All laptops with preinstalled Windows 8.1 are OEM version of the product that are modified by computer makers. You cannot activate a product of retail of Windows 8 with an OEM key.

  When get you the computer from the computer. I suggest that you create a recovery disk to help you in the future.

  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

• My Vaio has a sound that seems to come from the fan, is a solution for this?

  My Vaio has a sound that seems to come from the fan, is a solution for this?

  
  

• I pay 9.99 usd per month for the Plan of creative photography Cloud.  I use mainly LR... can I download / use the most powerful Photo Store for this award of contract also?

  I pay 9.99 usd per month for the Plan of creative photography Cloud.  I use mainly LR... can I download / use the most powerful Photo Store for this award of contract also?

  Ask for help here.

  Yes, creative photography plan cloud includes photoshop & Lightroom.

  Concerning

  Baudier

• Graphic does not display all the years when broken down by month

  Hello
  
  
  I have a table of view showing monthly trends of data within several years.
  A graph showing the same data only picks up one of the years. I don't have
  a column - total jobs on the Y axis - and the months on the X axis.
  
  Has anyone any idea why is not the total number of jobs on the Y axis
  pick up all the years showing on the table view?
  
  Thank you very much.
  
  -Jim

  Hi Jim,.

  What is your format of month? I think that data get aggregated for all the years in a month together.

  Rgds,
  DpKa