To help, very simple event button problem, does not.

Similar Questions

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

  (143868)

• Phone numbers contained in the e-mails and the web links will appear for several seconds and then disappear. I use Yahoo mail, however, if I use IE 8, the problem does not occur. Help!

  Phone numbers contained in the e-mails and the web links will appear for a few seconds and then disappear. I use Yahoo mail, however, if I use IE 8, with Yahoo mail, the problem does not occur. Help!

  This has happened

  Each time Firefox opened

  Is whenever I use Firefox

  Tools > Addons > > Extensions

  You have the Skype for Firefox extension?
  If so, disable it. Known to cause this problem for many users.

• Change event - why is does not select the current value, just the previous value?

  Hello.

  I use the script when the user selects a value from the drop box, something visible text (using the ' presence')

  I use the change of the event, but it does not work very well. When I select a value, it does not change the text, but if I select another value, it will display the previous selected value.

  Why did he not synchronize the value?

  Thank you!!

  Hi Rafael,.

  I don't know if you are using an event well.

  mouseExit is something good to use (especially when paired with the mouseEnter), during the change of the visual appearance of an object. For example, a button where the legend is underlined on mouseEnter and not highlighted on mouseExit.

  If you want to change the presence of objects on the form that the flat user above the list drop-down, then mouseEnter/mouseExit should work. However, if you want the changes occur once the user selects an item in the drop-down list, I recommend the exit event.

  Here are some examples:

  https://Acrobat.com/#d=txGF4IAoqmfTKPrLkwybIA

  https://Acrobat.com/#d=OzNofi-xFxmpXD1MrVU6rA

  https://Acrobat.com/#d=Hi0ZwVgVB1PWbxc6OJ0z4A

  Hope these helps,

  Niall

  Ensure the dynamics

• Problem with playing MP4 on a T60 1951-46U; problem does not exist on a T60 2623 - 4

  I have three renovated seller ThinkPad T60 systems running XP Pro/SP3: two of them are T60 1951-46U, the third is a T60 2623-4.

  A T60 1951-46U exposes a problem using VideoLan worm 2.0.7 to read MP4 files: video and game ok background music but the superposition voice is scrambled.

  This problem does not exist on the two other T60s. All these systems are (more or less) the same setup.

  Any help to fix this would be appreciated.

  Best regards

  Hi, thanks for your response. Sheeplishly I have to say that I found the problem- and it has nothing to do with the T60 in question. Through several pluggings and unpluggins of the speaker cord while the problem has continued to exist at last, I found that the plug of the power cord 3 mm was did not correct contact then that in the audio port. Very strange problem. The background music in the video was ok, but not the vocal part of the audio. The one good thing that comes from the question is that I have found this community is and found that it is both active and reactive. Yet once, thank you for your reply (and I'll look into the ThinkVantage System Update for the driver updates). Best regards

• HP-Pavilion g6 Mute button LED does not

  I have a HP Pavilion laptop g6 and I recently discovered that the LED on the button mute does not work, but the key works fine

  Help, please!

  Thanks in advance

  Hello all I had the same problem what I did was just go to (System) then (Device Manager) and then (audio, video and game controllers).
  Under there you will find a right click (IDT High Definition Audio CODEC) top and choose Update driver software and select (find the automatically...) MAKE SURE YOU HAVE INTERNET CONNECTION.

  This did the job for me, hope it does the same for you.

• button / (divide), does not

  button / (divide), does not work in the formula (instead of printing +), what to do?

  Look VERY carefully at what you see as + the divide symbol appears as a Chief and a threshold which, for some people, looks like a +. If you don't see the symbol try enter the formula and see if it DOES not give you the correct result.

• Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome.

  Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome. Specifically, a large part of Tumblr and Facebook menu has been changed in another language (Russian, I think). I tried reinstall Firefox, clear the cache and reset firefox to its default state. None of them helped. Any suggestions on how to fix this?

  Hey again,

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  I hope this helps!

  Curtis

• Shortcuts mouse to "Open the link in a new tab" help "Middle-click on the link" does not work on 10.0.1

  Shortcut of mouse to "Open the link in a new tab" help "Middle-click on the link" does not work on 10.0.1, it worked on version 9.0.1.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Problem does not occur when it is not connected USB so that it looks like some sort of communication problem. The L355 worked perfectly.

  Hello

  I recently installed an Epson L555 instead of my Epson L355, which worked well with my software windows 7 and my BACK program based. However, whenever the L555 turned the printer just keeps ejecting the hopper pages until it is empty. On the menu screen, it says "printing", but there is nothing in the print queue and I didn't send anything to be printed. Sometimes it reads "Fax set auto answer. By pressing the Stop/Reset button stops the ejection pages and "Cancel" is displayed on the screen. This continues for about 2-3 minutes, then the pages start ejected again. Problem does not occur when it is not connected USB so that it looks like some sort of communication problem. The L355 worked perfectly.

  Hello

  Thanks for posting your query in the Microsoft community.

  I understand that print jobs are getting cancelled and I will be happy to answer your query. There could be several reasons for this cause and to diagnose the problem, initially, I ask you to refer to the suggestions in the article below and check.

  Solve printer problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly? Like I can't pin, I keep it at the top of the page with scroll effect 0. It collapse, shows the menu buttons but does not close back up once reached the

  How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly?

  Like I can't pin, I keep it at the top of the page with scroll effect 0.

  It collapse, shows the menu buttons but does not close back once it reaches the anchorpoint.

  Appreciate your help. Thanks.Guess I need to find another solution. Am an artist and don't know anything about coding.

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• the simple contact form widget does not allow the user to submit. the lunch box turns red. What should I do?

  the simple contact form widget does not allow the user to submit. the lunch box turns red. What should I do?

  Hello

  You have used a form of e-mail field to create 'Appetite' section. This is the reason for which form registers an error as its not able to recognize an e-mail here entry.

  email form field is a required field for form of Muse. Please rename back to e-mail and also to create another field in form in the widget forum (go to the Option to form and enter a single-line text field) and it should work properly.

  

  Concerning

  Vivek

• Button behaviour does not, need help.

  I created buttons in flash, and when a user selects the button of my services, there is a submenu that is displayed, and in this sub menu, there are two other buttons.

  I named (name of the instance) one of my buttons in this submenu "design_btn" and included a code for each button, but when I test the movie I get an error for my submenu "design_btn" with the description of:

  "The unidentified design_btn.addEventListener (event MouseClick, designClick) access;"

  I'm confused, because I made sure I got the name of the instance appropriate for each of my buttons, but present a button does not.

  Any ideas of what is the problem?

  This is the code I used for the buttons. Stop() on top

  design_btn.addEventListener (MouseEvent.CLICK, designClick);

  function designClick(event:MouseEvent):void

  {

  var request = new URLRequest ("http://www.youtube.com");

  navigateToURL (request, "_blank");

  }

  Either don't name the variable with the same name each time, or declare it outside the service and assign it to the inside.  The version of the latter would be...

  var request: URLRequest;

  function servicesClick(event:MouseEvent):void

  {

  If (evt.target.name == "webdesign_btn") {}

  request = new URLRequest ("http://www.sign.net/");

  navigateToURL (request, "_blank");

  } Else if (evt.target.name == "pcRepair_btn") {}

  request = new URLRequest ("http://www.sign.net/");

  navigateToURL (request, "_blank");

  }

  Else if (evt.target.name == "busSupport_btn") {}

  request = new URLRequest ("http://www.sign.net/");

  navigateToURL (request, "_blank");

  }

  }