to install hp photosmart 3210 on laptop with vista

Similar Questions

• I can not install the KB2530548 update on laptop with Vista SP2

  I use a laptop with Vista SP2 - cannot update and install the following KB253 548 and switch of IE8 to IE9

  Hi DericKemp,

  1. what happens when you try to install the update?

  2. you receive messages or error codes?

  You can check which version of Internet Explorer is installed on your computer.

  Find out what version of Internet Explorer you are using

  Step 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  Step 2:

  You can also check out the following link and try to install the stand-alone update package.

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2530548)

  Hope this information is useful.

• I try to install photoshop elements 7 in my laptop with Vista.

  I tried to install photoshop elements7 in my laptop with Vista.  When the installation is complete when the computer restarts and is frozen in the black screen with microsoft running downstairs.  After several minutes, a screen appears with"do you want to repair windows" and you click on fix.   Once the fix as the photo store is complete uninstall.  It is not in the Recycle Bin, it's as if it was never installed.  I tried 3 times this...  Can anyone help?

  Hi Millie123,

  Ø summers - you have vista 32-bit or 64-bit?

  Photoshop is not compatible with vista 64-bit. If you use 32 bit, try the step below.

  This can happen if there is any application is in conflict. Turn your computer start-up in minimal mode and then install the photo shop and check if the problem persists.

  Clean boot steps.

  1. click on Start
  2. type msconfig in the Search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  1. in the general tab, click Selective startup.
  2. under Selective startup, clear the Load Startup items check box.
  3. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  4. click on OK.
  5. When you are prompted, click restart.
  6. after starting the computer, check to see if you still get the same error.

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use
  http://support.Microsoft.com/kb/331796

  NOTE: TURN ON YOUR COMPUTER TO A NORMAL STARTUP AFTER TRYING THE STEPS ABOVE.

  Click Start, in the search box to start, type msconfig and press ENTER.
  Select Normal startup, and then press apply and OK

  http://kb2.Adobe.com/CPS/404/kb404897.html

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Cannot install HP PhotoSmart 3210 on 8.1, 64-bit Windows. You want to start.

  Goal: Printer install HP Photosmart 3210, FUll CV utility (Solution Center, Photo Creations, etc.) on a new DELL system running Windows 8.1, 64-bit.

  Hardware configuration: The HP 3210 is connected by Ethernet to Western Digital My Net N750 router.  Two computers are connected to the same router: a race of all-in-one DELL 8.1 of Windows with all updates installed (this is the system I am trying to install the HP software on) and an Apple iMac, I need only basic printing capability.  Both computers are temporarily connected via WiFi; This will be changed to Ethernet at a later date.  The router using DHCP to assign IP addresses to devices, including printer.  I can ping the printer from two computers.  I can set up the HP embedded web server on both computers.  The iMac can print and scan from the printer.

  Short story: I tried several times to install the printer drivers and the HP utility software on Windows 8.1 System.  At one point, I installed the drivers, but not able to install the utilities.  When I finally got the utilities installed, they did not see the printer.  At the present time, even the notebook can not see the printer.  The mistakes that I've seen are:
  -"The system cannot find the file specified."  (the name of the file contained the string ice_suffix.  "I believe that this failure was due to the presence of McAfee Security software, using msconfig more later disabled.)
  -BSOD BAD_POOL_ERROR
  -No network detected (from HP Install Wizard) device
  "This app prevents you to restart" (the title of the app was "HP all-in-one series")
  I tried the wizard install the HP add a tool of the device, the print and Scan doctor and several other things.  I did a level 4 uninstall as described below, which has encountered an error in an early phase, but continued after I clicked "OK".  I installed the latest version of Flash.  The System File Checker has been run when the system was first installed on May 29 and found no problem.  I temporarily wired the printer directly on the Windows system via USB (and then put it back on the router).  I have reset the printer by removing the power for a minute, etc, etc.

  At this point, I would like to clean the system as much as possible and try again from scratch, using the installation wizard.  Based on my experience so far and a careful reading of the many positions installation - problems on this forum, I created a checklist of proposed to achieve this.

  My request on the forum: Please see the checklist.  I won't go forward until it has been approved as being complete and accurate.  Missing something?  Nothing is unnecessary?  The order should be changed?

  NOTE: Step 6 assume that you have already tried to install the software and therefore to have a copy of the uninstaller on the system utilities.  In my case it is true.

  1 connect the printer to the router via Ethernet.  (This is my current setup).
  2 turn on the printer.  Unplug the power cable from the back of the printer.  Wait at least one minute.  Reconnect the power cable.  Wait for the printer to initialize.
  3. do a "clean boot": (now RMB) do a right-click on the icon of window in the lower left of the screen.  Select 'run '.  Enter "msconfig".  Click on 'OK '.  In the Services tab, check "hide all Microsoft Services".  Click on "disable all".  In the Startup tab, click on "Open Task Manager".  On the start of the Task Manager tab, click the top entry and then click "disable".  Repeat for each entry in the list.  Verify that the status column now contains "Disabled" for each entry.  Click on the 'X' at the top right of the window to close the Task Manager.  In the System Configuration window, click 'OK '.
  4. RESTART the system to perform a start without the Services and start disabled.
  5. connect to an administrator ID.  This must be the ID used previously to try to install the software.
  6 do an uninstall of level 4: RMB on the icon of the window in the lower left corner of the screen.  Select 'run '.  Enter '%Temp% '.  Click on 'OK '.  In the resulting display folder (supposed to be in C:/Users / 'ID' / AppData/Local/Temp, where 'ID' is your user ID) enter "Uninstall_L4" in the search box at top right of the screen.  This should find 'Uninstall_L4.bat' (supposed to be in C:/Users / 'ID' / AppData/Local/Temp/7zS0 * / util/ccc).  Click (or double-click if your system is configured to require that).  [NOTE: several forum posts say to use L4uninstall.exe, but this file is not anywhere in the Temp folder on my system.]
  7 meet the need of all the prompts that appear.  A final prompt will tell you that a restart is required.  If two windows appear at the same time, both with "Restart" buttons on them, click the button in the larger window.  [Note from experience: when I click on restart in the small window, WIndows complained that he could not start because the larger window was always active.]
  8. once the system restarted, RMB-the icon of the window > run--> msiexec /unreg-> OK, then run RMB window icon->-> msiexec/regserver-> OK.
  9. check that the uninstall and complete if necessary:
  Look in C:/Program Files (x 86) for HP records; If found, delete them.
  Look in C:/Program Data HP records; If found, delete them.
  RMB-> the icon of the window run-> % Temp %-> OK.  Delete all files in the folder that results.  [NOTE that it prevents to run uninstall again until installation has been completed, since it is where are the uninstall files.]
  RMB-> Panel window icon-> devices and printers.  If the HP 3200 Series is broadcast, RMB-> remove the instrument.
  RMB icon window-> Control Panel-> system-> device-> tab Manager display-> show hidden devices.  Expand "Printing queues" (click the triangle).  When a HP 3200 queue exists, RMB on it and click on uninstall.  Expand "Printers" and do the same thing.
  RMB-> run-> regedit window icon-> OK. Scroll to the top of the list.  Click on 'Computer' to establish a starting point.  Edit-> Find... check the box "Keys", uncheck the 'Values', 'Data' and "Match whole string only" boxes.  In the "Search" box enter "HP." (including interval)-> then find.  [NOPE, that is not all HP keys and found a few that seem not to be HP (for example SOAHP. (DLL). a search for "HP" finds lots of unrelated keys.  Is a good way to clean the registry if level 4 uninstall it did not?]  Use F3 to search for subsequent entries.  For those who are clearly HP related [How can I be sure?], RMB on the key, and select 'delete '.  [Yes, it's dangerous and without greater clarity I won't actually, but I don't like leaving orphans key autour.]
  10. run Disk Cleanup.  Click the window to access a screen start or Apps.  Type "Disk Cleanup".  Click on "free disk space by deleting unnecessary files.  Check the desired boxes.  Click OK.  Wait for the course to complete.
  11 RESTART the system.
  12 install the HP software.  Pointing a browser on http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe to download the wizard, then run the downloaded file.  On the first prompt screen, click "install".  When you are prompted, select custom installation.  "Uncheck the box 'Unique consumables HP', 'scheme Customer Participation', and ' bing for HP bar '.  When you are prompted for the update preference, select "Ask before updating" [my wife, nonnegotiable preference] remove useful tips and suggestions.  Click on 'Next' as required.  When you are prompted, select the Ethernet connection.  The printer must be discovered.  [On one attempt, at this point, that I received the message "the requested service is not found".  Of course, there is that HP Services listed in msconfig, but in order to get that much, I had turned off them ("clean boot").  This seems to be a catch-22 situation, unless these services should have automatically started earlier in the installation process.]
  13 RESTART.  This is necessary at the end of the installation process.  ["Clean boot" conditions hold back at this point?  If so, I'll have to restore the Services and Startup items later and antother restart.  [When is is safe to do so, that is how do you know that the installation of HP is really over?]

  Again, the purpose of this post is to validate the above list.  Your informed comments will be appreciated.

  Hello

  Please try to uninstall the software by following the Uninstall_L4 utility (as stated in your previous post)

  Then, follow the steps below and reinstall the HP software again:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• I can't install XP multiboot on my current laptop with Vista.

  I would install XP multiboot on my current laptop with Vista. I created a new partition in the goal, but my XP CD (old) does not run the installation program. The error message says it's because the operating system is a later version.

  How can I solve this problem?

  Turn on the laptop. Place the XP disk in the CD/DVD drive. Do a fresh install of XP using the partition that you created.

  Now, Vista does not start because its charger has been replaced by the XP loader.

  See here for the methods repair:

  http://support.Microsoft.com/kb/919529

  This, http://neosmart.net/wiki/display/EBCD/Installing+XP+After+Vista

  from the section installation dual boot could be useful.

  Tom Ferguson

• Trying to install XP Pro on a laptop with a SATA drive on it.

  I'm trying to install XP Pro on a laptop with a SATA Hitachi drive and no floppy drive to load the drivers from. Hard drives is visible in the BIOS and AHCI in the BIOS as well. USB floppy drives will not work (will not be considered 'A' during installation). Is there a way to make an installation with appropriate drivers disk, added to this?

  Hello

  Please go to the bios and switch from AHCI mode and try again.

  If it does not work. You could integrate the drivers in XP Pro

  With the help of Nlite http://www.nliteos.com/download.html

  Follow the instructions only the wake and burn to a CD.
  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• Dell Inspiron Laptop with Vista installed at the factory does not start.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Dell Inspiron Laptop with Vista installed at the factory does not start. The display shows

  Indicator of treatment MM061 series white 80% in all of the BIOS revision A13 treatment indicator always goes to the same place and stops. I tried to tap the F8 key, but nothing happens.

  If you used Dell or the recovery Partition recovery disks to restore the system, you must talk about Dell problem because it's their software - not Microsoft.  We don't know what's on it or its operation.  We have no information to help us help you.  You need to deal with them.

  Sorry we can't be more helpful.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a laptop with Vista Home Premium installed. My plan is to install Win 7 and then move on to Win 10.

  Original title: Vista to Win 7 to win 10

  I have a laptop with Vista Home Premium installed.  My plan is to install Win 7 and then move on to Win 10.  I have a new full version of Windows 7 Pro SP1 with an activation key.  I have experience update to Win 10 of Win 7, but worry about the installation of Win 7 over Vista.  I guess I have to do a clean install.  There is no problem to meet the minimum requirements of 10.  Can someone give me some advice on the start-up of the conversion of Win 7?  Just insert the disk?  Everything has been backed up and it's ready to go!  Thank you.

  Since the family migration to Windows Vista Premium to Windows 7 Professional it will install a clean place, why not simply use your Windows 7 Professional product key to perform a custom Windows 10 Pro install from the go?

  I don't see the need to bother installing Windows 7 Professional.

  To learn more:

  How to download official Windows 10 ISO files

  then

  How to: perform a customized Windows installation

  To learn more:

  How to install and activate Windows 10 using your Windows 7 or Windows 8 product key

• I want to install Linux OS in my laptop with Windows 7

  I use Windows 7 and I want to install Linux OS in my laptop with Windows 7, I want to use the dual boot option (if possible provide a screenshot), how and where do I download Linux. .

  You can use the WUBI installer that will install Ubuntu on the C:\ drive without creating a partition or affect your installation of Windows 7. You can rate it and remove it easily in all simply uninstall.

  If you want to have it on a physical partition, then you will need to do some preparation:

  LINUX: Dualboot Linux and Windows

  http://NeoSmart.NET/wiki/display/EBCD/Ubuntu

  I suggest before you perform this backup you your installation of Windows 7 to avoid complications:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Another is to test Ubuntu using software such as VirtualBOX Virtualization:

  http://www.Oracle.com/us/technologies/virtualization/OracleVM/061976.html

  http://Lifehacker.com/5403100/dual+boot-Windows-7-and-Ubuntu-in-perfect-harmony

  http://www.linuxbsdos.com/2011/05/22/how-to-dual-boot-Windows-7-and-Ubuntu-11-04/

• Can I install Acrobat 11 on my laptop with the same license as my original on my workstation installation?

  Can I install Acrobat 11 on my laptop with the same license as my original on my workstation installation?

  Hi Dennis,

  Yes, you can install the same license on the laptop as well.

  Contract (EULA) as directed by Adobe, you are allowed to install the license for retail sale on 2 machines at any instance.

  Kind regards

  Rave

• I have a HP laptop with vista that no longer starts.

  I have a HP laptop with vista that no longer starts. I get the initial screen of HP and can access the configuration, but after that, all I get is a black screen with a blinking cursor. I ran the diagnostic test on my hard drive and it happened, but my computer still does not start.

  Hi Shannon6836,

  1. Since when are you facing this problem?
  2. you remember to make changes to the computer before the question?

  3. are you able to boot in safe mode?

  See the methods mentioned below and check if that helps.

  Method 1:

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  If you are able to start in safe mode, follow the steps mentioned below to complete the restore of the system:
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  Note: System Restore does not affect personal files, such as e-mail, documents, or photos. You can only restore files that you have deleted if you have made backups of these files.
   
  Method 2:
   
  I suggest you to disconnect all devices external one except keyboard and mouse and try to start your computer and check if it helps.

  Method 3:

  I also suggest you perform a startup repair and check if this solves the problem.

  Follow the steps below:

  a. Please insert the Windows Vista DVD and restart the computer.

  b. when we are invited to press a key to boot from the DVD, please press enter or the SPACEBAR.
  c. choose your language settings, and then click Next.
  d. click repair your computer.
  e. Select the operating system you want to repair, and then click Next.
  f. in the System Recovery Options menu, click on the Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.
   
   
  If the Startup Repair tool is an option of recovering preinstalled on your computer:
  a. remove all floppy disks, CDs, and DVDs from your computer, and then restart your computer.

  Restart the computer

  b. do one of the following:
  i. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  
  II. If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.
  III. in the display Advanced Startup Options , use the arrow keys to select repair your computerand press ENTER. (If repair your computer is not listed as an option, then your computer does not include startup as a preinstalled recovery option repair).
  IV. Select a keyboard layout, and then click Next.
  v. Select a username and enter the password, and then click OK.
  VI. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.
  Access the link below for more information on the Startup Repair:

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information helps

• My games suddenly stopped working on my laptop with vista SP 2 after a single pass?

  Ideas: I use a Gateway laptop with vista Home premium sp 2, AMD turion x 2 dual core x 64 bit, fitted an ATI HD 3200 graphics card. (The card is built-in.) He is more than capable of handling the Dead Space, Bioshock, big chase and combat arms and run each of them perfectly at maximum quality, except for dead space, which had to be alleviated a little to improve the speed and responsiveness.

  • Programs: Borderlands, Dead Space, Bioshock, Grand Chase, Combat arms.
  • No error message. Games freeze just to the preloader or splash screen. The processes are still ongoing, but there is no game window or the game got stuck on splash screen. (I have to 'end of process' to stop smoking completely.)
  • Recent changes made to your computer: just closed, each of these games after their execution 1 time, and they would not work again. Problem occurred after a standard, so that could have linked somehow.
  • What you have already tried to solve the problem: compatibility, analysis antivirus, cleaning Mode, running in as long as administrator, disabling firewall, protection against viruses, disabling the registry Disabling UAC, each administrator, update drivers for graphics card, system update, reinstall everything THAT I can think of who could fix this problem.
  • NOTE: I ran these games on another computer and they work fine. A solution to this issue has completely escaped me.

  Have you tried to reinstall or update your directX? or your visual c ++ Redistributable files? Sometimes, if this stuff is corrupted (and you won't know until you start a game generally because it stops working) and you need to reinstall such things.

• I bought a laptop with vista and I was told I have to upgrade to windows 7 free. How do I do that?

  I bought a laptop with vista and I was told I have to upgrade to windows 7 free. How do I do that?

  http://www.Microsoft.com/Windows/buy/offers/upgrade-option.aspx

  Above Microsoft link has info for the Windows 7 upgrade Options from the various participating computer manufacturers.
  Read the info here to see if you qualify.

  http://www.Microsoft.com/Windows/buy/offers/upgrade-FAQ-option.aspx

  FAQ about the upgrade is at the link above.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  For any other question of Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• HP laptop with vista

  I have a HP laptop with vista and when you try to start I get a disk failure hard error 0301... the hard drive is still just working trying to get off the files until it is too late, but the system startup repair prevents me to reboot... any help would be apprieciated, thank you...

  I have a HP laptop with vista and when you try to start I get a disk failure hard error 0301... the hard drive is still just working trying to get off the files until it is too late, but the system startup repair prevents me to reboot... any help would be apprieciated, thank you...

  Probably need to make the drive of the machine, connect it to an external USB adapter and get things off that way.

  Or start on an Ubuntu or other stuff OS CD/DVD and copy bootable on the local hard drive.

• My laptop with Vista travels continuously by a "not connected" to "limited connectivity" to "connected." What should I do?

  My laptop with Vista travels continuously by a "not connected" to "limited connectivity" to "connected." What should I do?

  Hello

  Try Microsoft fix it in the next article

  "Windows Vista cannot obtain an IP address from certain routers or some non Microsoft DHCP servers": http://support.microsoft.com/kb/928233