to & quot; fpsane.cpp & quot; error on a program that will run on worm 8.8

Similar Questions

• My computer came with vista home and I've upgraded to windows 7. I deleted THE 32 bit in error. What should I do? There are programs that will be running only on 32 bit IE

  My office is a hp pavilion phoenix self. It had vista Home premium installed. I upgraded to windows 7 and now using this operating system. I removed IE 32 bits in error and now I only have THE 64-bit. How can I get THE 32 bit on my computer because there are programs that IE 64 bit does not work. There should I let the dog sleeps lying?

  Press Windows key + R

  Type:

  C:\Program Files (x 86) \Internet Explorer\iexplore.exe

  Right-click and PIN in your taskbar

• 500 internal Server Error on the server that is running Windows 2012 R2 and IIS 8.5

  Hello. We have a new server. On our old server, I used to get all debug information. Cold Fusion on my computer if something was wrong with a page of Cold Fusion. Now with the new server, all I get is a 500 internal server error. Is it because something is not properly configured on the server and debug information. Cold Fusion is not able to display? Anyone know what I should do to get Cold Fusion debugging information. to display? Here's what we all now:

  Our new server runs Windows Server R2 2012 and IIS 8.5

  ColdFusion Standard 11

  SQLEXPRESS 2008

  
  

  Thank you.

  Andy
  

  I have two settings enabled for my development environment, and it works for me. How about your IIS settings: you have detailed error messages that are enabled for local and remote applications?

• Error 0xD1EED773 - fpsane.cpp

  Hello friends

  Everytime I open LabVIEW this error message.

  It has started happening after I installed/unninstalled. some packages (modules) through the VI Package Manager.

  It isn't anything touching after LabVIEW opens, but it is always a mistake.

  Please check the picture as an attachment for more details.

  I hope someone can help.

  Thank you

  Hey, João.

  So I found a knowledge base that respond to your question.

  That means a 'crazy object' or 'fpsane.cpp' error and what should I do?

  http://digital.NI.com/public.nsf/allkb/AFA28DCC3DE89839862566B200594E8C?OpenDocument

  Kind regards.

• Unrecoverable internal error: 'fpsane.cpp', line 280 or 281

  Hi all

  I have a problem that convert screw of LV2010 at LV86.

  I use LV2010 to save the screws that the previous version LV86, then use LV86 to open the screws that have been save as version LV86.

  He always come out this error: unrecoverable internal error: 'fpsane.cpp', line 280 or unrecoverable internal error: 'fpsane.cpp', line 281

  Can someone help me?

  Thank you in advance!

  Hi, thanks.

  I found a root failed.

  RefNum LV2010 image control is NOT compatible with the LV86.

• error fpsane.cpp 367 on LabVIEW

  Hello

  I have an application that uses tabs and DLLs for FPGA, GPIB, PCI and CAN devices. I also have a TestStand UI on one of the tabs.

  Sporadicaly I get error about line 367 fpsane.cpp.

  Can someone explain me whence this error?

  Daniel Coelho

  You have a number of tracks:

  • Your best bet is to return to an earlier version that did not experience the problem and start adding to this piece by piece. If the error comes up again you will have isolated the problem.
  • Remove the controls and/or indicators and create new ones. Do not do a "replace". You must remove them and create new ones, and associate the new.
  • Switch to the block diagram, select the entire block diagram and drag it in the schema of a new VI. Everything will be transferred to the wire. Save the new VI and work with it to see if the problem goes away.
  • Follow the steps described here.
  • Select 'Search now' LabVIEW starts so your timeline of failure may be submitted.

• & quot; MX. Script is not related to the & quot; error

  I'm breaking my application into components. But when I do and this nucleus of import. Application, I get an error on the part that says "the MX prefix for item mx:Script is unrelated.
  
  (dgUserRequest is in my main mxml file)
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < mx:Script >
  <! [CDATA]
  Import mx.core.Application;
  []] >
  < / mx:Script >
  
  "< mx:TabNavigator x ="379"y ="77"width ="331"height = '302' xmlns:mx = ' http://www.adobe.com/2006/mxml" > "
  < mx:Canvas label = "Job Information" width = "280" height = "289" >
  < mx:Label text="{Application.application.dgUserRequest.selectedItem.effdt}"/ >
  < / mx:Canvas >
  < / mx:TabNavigator >

  Ok. This is because the SCRIPT must be inside the mx:TabNavigator.

  Flex is great, but this kind of things really annoy me ;)

• Problems with tdms built executable; memory.cpp write error

  Hello

  I have a problem with writing tdms files in bed which executable, that I created with the Builder application in LabView 8.2.1.

  I created a small requesting readings some channels in the DAQmx. This schould results written in a PDM file. All this happens within a while loop, even the steps open-entry-closing-PDM.

  This test in the development environment everything is fine. But if I create an executable file and try this on the same and other computer, I received an error warning.

  The error that says: error on line 342, memory.cpp

  Is there anyone who has any idea what is the problem? What I have to insert something in the creation of PDM application designer?

  best looks, T.Malec

  The problem of TDMS is special to 8.20. However, you cannot run the executable with a new runtime, because the compiled code is not compatible between major releases (example: code compiled with 8.5.0 will run on 8.5.1, but not on 8.6.x).)

  Herbert

• Almost every time that I do a right-click to display a menu to do something such as delete or copy, the following error message appears: program internal error:.\Src\IntegrationToolsHolder.cpp,21

  Original title: internal program Errror

  I use XP Professional 32-bit.

  Almost every time that I do a right-click to display a menu of something for example delete or copy, you receive the following error message.

  Program internal error:.\Src\IntegrationToolsHolder.cpp,21

  If I click OK on the error message, it goes & I can then right click New & the appropriate menu appears and works correctly.

  Any ideas, please, as to what is the cause?

  Kind regards

  I told you I want to talk to you soon as you try these things.

  How to boot in Safe Mode and Clean worked for you?  Not at all useful?

  You said about this 2 weeks ago?

  Yet once, I fell in this place and the time and effort wasted because MS Answers forums invite to no system information when a new question is asked - but I digress.

  Update of security 908513 is included in Service Pack 3 update.

  Since forums MS Answers asks you any information from system when a new question is asked, we don't even know what Service Pack you have.  If you have SP3, you already have the update.  Two weeks and we don't know what is your Service Pack, what is your antivirus/antimalware environment...  We know that you have XP Pro 32-bit however.

  What you're likely to have is an extension of the Explorer Shell with a malfunction, and you can usually understand as follows:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  If you can really achieve almost everytime you do a right-click and choose something like delete or copy, you're well on your way to understand.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success about the errors with the extension and to what other people have done on it... Maybe just to get an update of the program that adds the suspicious extension.

  You can Google something like:

  Explorer XP crashing

  (you must complete your suspect on behalf of add on)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the extensions one at a time non-Microsoft keep a list so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately turned off, to disable an extension does not require a restart, but if you find the problem, I reboot and retest in all cases to be sure that the problem has disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• First elements Timecode.cpp - 1014 error when adding media

  Software: First elements 11

  Camera: Sony DCR TRV22E

  OS: Windows 7

  When selecting Add multimedia elements, I get: [..-.. \Src\Timecode.cpp-1014] error several times, when the capture window finally arrives he says that the capture device is currently offline.

  This happens not only when the unit is plugged in and power but also when the camera is not connected.

  I tried different IEEE 1394 drivers available in windows 7 and none of them work.

  Host compatible OHCI 1394 controller

  Controller of compatible host OHCI 1394 (Legacy)

  VIA 1394 compatible OHCI Host Controller

  The connection to the camera via firewire is ok because I can download a video of him using Nero Essentials video, I can't do it through first elements 11.

  Post edited by: foradobeuse Oops, I put the incorrect error code in the title, it should be timecode.cpp - 1014

  I think I solved this problem.

  I have a number of external USB connected, for example, hard drives, webcams, mouse, keyboard etc., devices so I unplugged individual devices until I found that the Error 1014 is more appeared when adding media.  I plugged the other USB devices back in but kept the last disconnected device and can now add media from my miniDV via firewire.

  I don't think we can let off the hook here PE11, since I had no problems with USB so far and each capture freeware program that I tried did not have a video capture problem I had plugged in any USB device.

  Thanks to all who have contributed and I hope this helps other users faced with Error 1014, look at the number of points of view on this discussion after only a few days (~ 300) I don't think I was the only one.

• 0x1A7102DF fpsane.cpp - Labview crashes

  Hello!

  I'm trying to run a vi which includes a 'Open FPGA VI Référence' function. However, an error and it says that "not compiled FPGA VI. When I try to compile the FPGA VI a message saying "The VI is broken". I try to run the FPGA and when appears in the error list, there is no error or warning in the list, although the name on the fpga includes the Red 'X' ('show warnings' is checked).

  After a while, I realized what the location problem. Joint there are a few files. The image shows a sequence structure, where if I delete the last column, the VI becomes "compilable" (the broken arrow disappears). However, when I try to compile, the system freezes completely and labview closes automatically. Error reports are also attached. No idea how solve the problem?

  Thanks in advance

  Pablo

  Hi Pablo.

  I see that you're talking about the subject in this thread as well: http://forums.ni.com/t5/LabVIEW/Broken-FPGA-VI-but-error-list-empty/m-p/2742980/highlight/true#M8104...

  If you attach your project files, I'll help you with troubleshooting, please download the whole project.

  In the meantime, I can recommend some tips n tricks on how to free up space on your screen by changing the structure of the sequence. Use a shift register to increment the value of the address.
  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/avoid_overusing_sequence_structures/

  Best regards

• An error in this Applescript that I can't understand

  Hi, I searched some forums and found this script below which I modified. It works great except for a single statement:

  runScript If = 1 then number error -128 I want the script to do is, when a USB drive is mounted and is in the ignoredVolumes as "USB Untitled" I want the script to stop. What I can't understand is, runScript is set to 1, "Untitled USB" Monte, runScript is not changed, why don't the script stops with an error "user cancelled"? On the other hand, if a key USB Monte is not in the ignoredVolumes, runScript is set to 2 and copy the file I want it. What hurts? It's probably something that will be very obvious when I see the answer.

  Thanks for any help with this problem,

  Mike.

  
  

  
  

  property ignoredVolumes: {'10,10 30 1. 5 't', 'files 1. 5 't', "Untitled USB"} - add if necessary

  property videoExtensions: {"avi", "mov", "mpg", "wmv", "mp4" and "mkv"}

  the value newVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / new")

  the value oldVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / old")

  game runScript to 1

                 tell application "System events".

  the value rootVolumes to disk (POSIX file ' / Volumes ' in the text)

  the value allVolumes to name of every element of disc of rootVolumes

  the value numofallVolumes to the County of allVolumes

  Repeat with the present book in allVolumes

  say application 'Finder '.

  if (the present book is not in ignoredVolumes and (this book as text) is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  runScript If = 1 then number error -128 - it does not give a 'User cancelled' error when "Untitled USB" is mounted

  runScript If = 2 then

                                                                          try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / new ") as text) to newVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in folder a." buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  Try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / old ") as text) to oldVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in the folder B" buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  display the dialog box "USB key will Auto Eject in 10 seconds or click OK... "buttons button 1 with the title"copy Complete - Eject? "default {'OK', 'No'} which gives after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the button returned of result is "OK" or gave up a result then ejection of the this book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  end if

  end if

  end if

  end say

  end Repeat

            end say

  The way in which your external block If is currently based, the script can't do anything when this book is in the ignoredVolumes, it can not yet test the runScript value. Try something like this:

  If the present book is in the ignoredVolumes then

  game runScript to 1

  on the other

  if (the present book as text is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  end if

  end if

  
  

  Of course, you need to remove a "end if' the end of the script.

  
  

  
  

• Trying to empty the trash.  After clicking on empty the trash.  An error comes up saying that this cannot be done due to the error 50.  Tried to check and repair disk permissions.  This finished.  Then tried to empty the trash again and got the same error

  I tried to empty the trash. After clicking on empty the trash. An error comes up saying that this cannot be done due to the error 50.

  Tried to check and repair disk permissions. This finished.

  Then tried to empty the trash again and got the same error 50 yet.

  I rebooted my macbook. When it restarted it flashed the apple logo, progress bar began to charge up to 15%, then the black and white code popped up for a few seconds, then a box pops up saying "your computer has restarted because of an error, press any key to restart." It is now is an endless restart loop.

  I can't go in safe mode or in disk utility.

  Any suggestions on what to try?

  Thank you

  What happens when you try to restart without danger as indicated to OS X Yosemite: start in safe mode

• I have a problem when I want to print an email page.it shows me an error that seems to come from a program that blocks the appearance windows.thos do sais.what do?

  Question
  I have a problem when I want to print an email page.it shows me an error that seems to come from a program that blocks the emerged Windows.ce do sais.what do? Edit

  Can you check this problem on Firefox 9?

  • getfirefox.com

• Satellite Pro A300-1NT - errors in display driver that causes bluescreen

  Since I bought my laptop in 2009, I got errors in display driver that cause the PC to blue screen. This happens several times a week. Sometimes, it recovers on its own.
  I have not found a display driver later than in 2008 and have updated the latest version of the BIOS.

  Help?

  If you couldn't find a display driver on [Page Driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]. You can try to install from the website of the provider (Intel, Ati or nvidia)

  Post edited by: Jeka -?