To remove the error message about the network drive

Similar Questions

• pixel shader - get an error message about the 2.0 pixel shader

  Why do I get an error message about the 2.0 pixel shader and how can I solve this problem

  This indicates that your video card is not capable of using pixel shader 2.0 technology.
  Check that your video card is compatible with the minimum requirements of the game or software you use.

• Remove the network adapter - error

  Hello

  I use the following code to remove all NICs connected to the specific virtual machine.

  Sometimes the workflow completes without error, but most of the time, I get the following error in the vCenter: invalid configuration for the device '1'.

  What can I change in my code?

  var nicsToRemove = [];

  for each {(device var in vm.config.hardware.device)

  If (device instanceof VcVirtualVmxnet

  || device instanceof VcVirtualVmxnet2

  || device instanceof VcVirtualVmxnet3

  || device instanceof VcVirtualE1000

  || device instanceof VcVirtualPCNet32

  || device instanceof VcVirtualEthernetCard) {}

  Here, you can add custom logic to decide whether to remove the network card

  This code example removes all network adapters

  nicsToRemove.push (device);

  }

  }

  var vmConfigSpec = new VcVirtualMachineConfigSpec();

  var deviceChanges = [];

  var deviceConfigSpec = new VcVirtualDeviceConfigSpec();

  System.log (VM. (Name)

  for each {(var nic in nicsToRemove)

  deviceConfigSpec.operation = VcVirtualDeviceConfigSpecOperation.remove;

  deviceConfigSpec.device = nic;

  System.log ("the nic is:" + nic.connectable.status);

  vmConfigSpec.deviceChange = deviceChanges;

  If (nic.connectable.status == 'ok') {}

  deviceChanges.push (deviceConfigSpec);

  }

  }

  try {}

  myTask = vm.reconfigVM_Task (vmConfigSpec);

  } catch (ex) {}

  System.Warn ("the reconfiguration of the VM error:" + ex);

  }

  It looks like your code is wrong here:

  for each {(var nic in nicsToRemove)

  deviceConfigSpec.operation = VcVirtualDeviceConfigSpecOperation.remove;

  deviceConfigSpec.device = nic;

  System.log ("the nic is:" + nic.connectable.status);

  vmConfigSpec.deviceChange = deviceChanges;

  If (nic.connectable.status == 'ok') {}

  deviceChanges.push (deviceConfigSpec);

  }

  }

  I think it should be:

  for each {(var nic in nicsToRemove)

  deviceConfigSpec.operation = VcVirtualDeviceConfigSpecOperation.remove;

  deviceConfigSpec.device = nic;

  System.log ("the nic is:" + nic.connectable.status);

  If (nic.connectable.status == 'ok') {}

  deviceChanges.push (deviceConfigSpec);

  }

  }

  vmConfigSpec.deviceChange = deviceChanges;

  You also probably want to get out the task if deviceChanges.length<= 0="" since="" there="" is="" no="" nic="" in="" the="" desired="">

• I can't access to our private internet connection... I get the error messages like acquiring network address AND identity validation

  problem network address acquisition
  I can't access to our private internet connection... I get error messages like acquiring network address AND validation of identity no matter how long I wait nothing happens... Please help me.

  create a new internet connection or reset TCP/IP socket

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• How to remove the network profile

  Original title: Double Internet access

  I have reproduced the internet access points. My network is one, it is not named or protected, and the other is called another network without any protection. Other users in households show only one when they go to access, but it's the bad access. They show only internet access. There are seven in our region, but only 3 see the same info and signal excellent. How can I remove the 2 bad ones?  Don't know what Internet number I use.

  Hello

  This problem can occur if the wireless network is available in your particular range or coverage area.

  Please see the following link on how to remove the network not searched profile:

  To remove a wireless network connection

  http://TechNet.Microsoft.com/en-us/library/gg252588 (v = ws.10) .aspx

  You can also check the suggestions provided in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-can-i-remove-old-network-connections/679baf9b-0303-4B2C-AF51-92981477a43a

  Important: the above article contains steps that tell you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow these steps from the following link: http://support.microsoft.com/kb/322756/en-us

  Please answer us on the State of the question to help you further.

• Remove the network card

  Hello

  I want to go on a list of virtual machines and remove their network card.

  Is there a workflow that receives an array of virtual machines and remove the network card?

  If not, someone create a workflow\script do?

  Thank you!

  Here is an example of code to remove the network adapters one virtual machine (vm of input parameter)

  var nicsToRemove = [];
  
  for each (var device in vm.config.hardware.device) {
    if (device instanceof VcVirtualVmxnet
     || device instanceof VcVirtualVmxnet2
     || device instanceof VcVirtualVmxnet3
     || device instanceof VcVirtualE1000
     || device instanceof VcVirtualPCNet32
     || device instanceof VcVirtualEthernetCard) {
      // Here you can add some custom logic to decide whether to remove the network adapter
      // This sample code will remove all network adapters
        nicsToRemove.push(device);
    }
  }  
  
  var vmConfigSpec = new VcVirtualMachineConfigSpec();
  var deviceChanges = [];
  var deviceConfigSpec = new VcVirtualDeviceConfigSpec() ;  
  
  for each (var nic in nicsToRemove) {
    deviceConfigSpec.operation = VcVirtualDeviceConfigSpecOperation.remove;
    deviceConfigSpec.device = nic;  
  
    deviceChanges.push(deviceConfigSpec);
  }  
  
  vmConfigSpec.deviceChange = deviceChanges;  
  
  try {
    myTask = vm.reconfigVM_Task(vmConfigSpec);
  } catch (ex) {
    System.warn("Error while reconfiguring VM: " + ex);
  }
  

• missing hal.dll message after removing the hard drive

  Original title:Ok, I had the same problem on my hard drive missing hal.dll. My question is what windows xp writes the cmos on my computer?

  OK, I had the same problem on my hard drive missing hal.dll. My question is what windows xp writes the cmos on my computer? The reason why I ask, is that I physically removed the hard drive from the computer and then start the computer I get the same message hal.dll lack. Since the hard drive is not installed, the only place where this message comes's cmos or bios of the computer.
  I know it seems odd, but I couldn't believe it when I saw it after removing the hard drive. It used to be with older computers and Windows 95 or 98 when you took a hard drive that wasn't working and installed with one that works from a different computer, you could swap out and boot the computer and make a few changes to some drivers if you.

  So what is windows xp write to the memory cmos on my computer?

  > Ok, I had the same problem on my hard drive missing hal.dll.

  The same as what? If you reference another thread, please include a link to it.

  > My question is what windows xp writes the cmos on my computer?

  It is not write anything for her at all.

  > Lack of the reason why I ask this is that I physically removed the hard drive from the computer and then start the computer I get the same message hal.dll.

  I think that you're wrong. I would like to say two things happening:

  1. you have more than one hard drive and the problematic drive was not removed, or

  2. you deleted something other than a hard drive.

  Do you have a CD in your CD drive by chance?

  What is the brand and model of your PC? Are you able to get into the BIOS?

• I can't connect you on some client computers on a domain environment unless I have remove the network cable.

  I have almost five machines on my LAN that cannot log on to the domain, unless I have remove the network cable and then it connects.
  Please advise?

  On the domain controller or problems by communicating with the domain controller, when you remove the network cable, you connect with that caching of credentials.  Also look at the DNS settings on the RODC, the RODC DNS should point to itself, make sure that the machines are all on the same subnet.

  John

• difficulty to remove the network wireless to my laptop

  Hi - I'm unable to remove the network my laptop wireless. I have windows Vista Home premium on a Dell Inspiron 1525. I need to delete the list of wireless network in order to re - install (due to changes to the security settings). When I try to remove it, it disappears, but then within 5 seconds it appears again, like a ghost in my computer. Help, please

  Perhaps, he keeps coming back because you're connected to the Internet.

  I assume you mean: network and sharing Center, manage wireless networks, one of the networks on this list, your right you click on the network and clicked on delete network.

  Well, if you click Properties, you can change the security settings.

  If you were logged on to the disconnected from the Internet and then you can remove it and if it works you will see it come back.

  But he will always be there even if you don't see it.

  To remove it completely connect to the Internet with another connection, not one you want to delete.

  Open the network and sharing Center click on customize, click on merge or delete network connections, select the connection that you want to remove and click on delete. This removes the registry.

  If you are unable to connect to the Internet to do this follow these steps:

  Press the Windows Logo key and the R key to open the run.

  type: regedit, click OK

  Navigate to: HKLM/SOFTWARE/Microsoft/Windows NT / CurrentVersion / NetworkList / profiles

  Click on one of the profiles below to view on the right side. Look at the name of the profile to make sure it is the right one.

  When you see one you want to remove a right click the highlighted one on the left side and click on delete.

• After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?

  After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault.  Any ideas to fix this?

  This was the solution!  The works of vpn as $ 1 million now.  I followed the instructions above to enter the uninstall program and selecting the repair option.  I rebooted the machine, then used the troubleshooting on vpn software compatibility option.  Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.

  Thanks, Nick!

  Rick

• Satellite Pro P300 - remove the HARD drive to make a backup?

  My P300 went to my local store to repair for a network card problem. I thought it was just a software problem or driver, so I wasn't worried that my machine is still under warranty. After investigation, they stated that they could not resolve the issue, so would be to reformat and reinstall the OS, they thought they should solve the problem.

  To my horror, I found that they had broken the seals of guarantee and open to the top of the machine. They claimed the only way to save the P300 before reformat it, is to remove the HARD drive!
  Is this true?
  (It turns out that a broken chip is to blame, but because they violated the warranty, Toshiba will not touch!)

  Can anyone say about this the removal of HD to support it please?

  Hey,.

  Normally it of not necessary to restore the factory settings with to remove the HARD drive but don t you worry about this. The laptop can still be opened from a service provider authorized without losing the warranty.

  I also put t know why they did, perhaps they have checked the material. It would be possible because they have professional diagnostic tools.

  But interesting to know whether or not your problem is now resolved?

• Can't deleted iPhoto Library the network drive backup

  I made a backup of my library iPhoto on a network drive. Since then, I realized Time Machine made a better job of backing up my iPhoto library. So I planned to remove the library for free space.

  When I try, I get this message:

  "The operation cannot be performed because you have not granted access to some of the elements."

  If I can spend in the library and digging around, I find there are hundreds, maybe thousands of articles where I don't have permission. Y at - it a way to replace that can simply remove the library?

  Which does not imply iPhoto somehow - maybe you can get help from the forum for your operating system, but most likely, you need support from the supplier of the network drive - this is the question is

  I would ask that your post moved to the captain El forum and see if some one can help

  LN

• I have Windows Vista and have recently received an error message about Adobe Flash Player Update Service 11.6 is this something I need to download?

  After having been online for some Germans, the error message about Adobe Flash Player Update Service 11.6 r602 constantly comes up.  Do I have to buy this update?

  HI Maria,

  Please go to the Microsoft Community Forums.
  After the description of the question, I understand that you want to install Adobe Flash Player Update Service 11.6.
  Let me go ahead and help you with the issue.
   
  I want to tell you that you don't have to buy this update, it is free to download. You can go ahead and install the update that is offered automatically.
   
  You can find out which version of Adobe Flash Player is currently installed on the computer:
  Check out the link:
  http://helpx.Adobe.com/Flash-Player/KB/find-version-Flash-Player.html

  Note: Follow step 4 of this article to install the latest version of Adobe Flash Player.

  
  If the problem persists, you can display in the Community Forums of the Flash Player to get help:
  http://forums.Adobe.com/community/flashplayer
   
  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• Access to the network drive. Unable to drag files to USB

  I can see the files on the network drive, but when I try to drag the file to a USB drive it. He said that problem access the hard disk, but I can open the file on that...   Any ideas would be appreciated

  Hello

  1. What is the exact error message that you receive?

  2 have you tried copier\paste manually?

  I suggest copier\paste manually the files on the USB drive and check to see if the same problem happens.

  You can also check this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  It will be useful.