To stop continuous print spooler

Similar Questions

• Why stop automatic printer spooling service on windows 2007?

  Why stop automatic printer winding service and sharing on windows 2007?

  Hello

  You're talking about Windows 7? We have just Windows 8 and Windows 2007 could be a long, long, long way to go. Please try the second solution from the following link:

  http://social.technet.Microsoft.com/forums/en/w7itproperf/thread/fd7f46d3-Baa1-4a38-9AD3-dec5426d9297

  I hope this helps.

• Print spooler problem. ERROR (0X000006BE)

  Print spooler problem.  I have a problem with the spooler to stop continuous printing.   I get this ERROR (0x000006be).   I've seen a lot of suggestion already... such as printer drivers are corrupt, need to clear the printer, etc.  I already went to SERVICES and connected so that administrator, assign the automatic print spooler, restarted the Services 50 times, etc.  Nothing works.  In response to a lot of suggestions, NOTE: I have not a printer is installed, I did not have any printer software installed, there is no DRIVER not installed appears to be damaged.  When I go to control panel > printers... There is no printer listed.  When I click on add a PRINTER, I get the message (0x000006be).  Any suggestions

  Hi Wireem,

  What is the brand and model of your printer?

  I suggest you to follow the steps and check if it helps.

  Method 1: Install the latest software and drivers for the printer from the printer manufacturer website and check if it helps.

  Method 2: You can also follow the link and run Microsoft Fix - it and check if that helps.

  Diagnose and automatically fix problems printing and printer

• DEP stoppong my printer spooler

  spooler does not

  Hello

  1. have you made changes on the computer before this problem?
  2. what you are trying to print?
  3. What is the full error message or error code?
  
  If you cannot print due to Data Execution Prevention stops the print spooler, then I suggest you to try the following methods and check if it helps.
  
  Method 1:
  
  Restart the print spooler device

  a. Click Start, select Control Panel and then click on Administrative Tools.
  b. double-click on Services.
  c. in the user account control window, click on continue.
  d. click on print spooler.
  e. click Stop to stop the print spooler.
  f. Click Start to restart the print spooler.
  g. click OK.
  h. restart the computer and check if that helps.

  
  Method 2:
  
  Try the following steps:
  
  a. Click Start, right click computer and select Properties.
  (b) in the window that appears, click Advanced (on the left panel) system settings.
  (c) in the first box that says Performance, click on the settings button.
  d. in the window that opens, click the Data Execution Prevention tab at the top.
  e. There should be a box of exceptions in the middle of this window. Click the Add button and navigate to the C: drive, then Program Files, then the iTunes folder, and then choose the iTunes exe.
  f. Add the exception, and then click OK in the window of the DEP.
  
  You can also try these four steps:
  
  a. go to programs and features in Control Panel, click on turn Windows features on or off.
  b. click + sign printing services.
  c. Select LPD and LPR. You must remove the Internet printing Client. Restart your PC to ensure that there is no error in the spooler service.
  d. to re-add your printer driver.
  
  Reference:

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• Print spooler crashes

  OK... very detailed and very annoying problem.

  File (multiple Machines, not just my own)
  Computers
  Computer 1 - Windows 7 home 64-bit
  2 computer - Windows 7 Ultimate 64 Bit family
  3 computer - Windows 7 Professional 64 bit
  Network printers
  1,2,3,4 - Samsung Clp-620ND printer
  5.6 - Samsung CLP-610ND printer
  Symptoms
  Randomly, try to print a document
  This requires a preview before printing, or create a PDF or JPEG printing will stop the print spooler.
  The print spooler crashes and the program and any other program that requires access to this ability will be block.
  (Odd Note: this also affects programs like Corel Draw creating a view)
  Stop the print spooler and clean the cache of the spooler, and then restarting the spooler does NOTHING.
  Stop the spooler will unlock programs but of course allow me to print.
  The ONLY and I mean the ONLY thing that works is set to zero.
  Since it's 3 work computers, restart anywhere from 1 to 4 times a day is not effective and a little boring.
  Time
  This started occurring immediately after an update of microsoft 3 months ago. I was unable to identify the cause of the update.
  Measures ALREADY taken.
  Remove the hardware and the driver / driver package from every single computer on the network / re - install the drivers (no luck)
  Remove the hardware and the driver / driver package from every single computer on the network / install different drivers (no luck)
  Use of Mr. Fix - it for the printer problems (no luck)
  Re-install WINDOWS (works until this bad update draws once again, and I can't just turn off update)
  Turn off the printer for print jobs queued (works but not good because that causes major problems with printing)
  Uninstall / install all the drivers as administrator.
  Turn off Port forwarding / share for each printer (no luck)
  Install the shared USB printers (no luck)
  Turn off windows Defender, I found an article that describes that an update of the virus definition started blocking the printer ports (no luck)
  I tried third party drivers (no luck)
  Stop the spooler / Clear Cache / Start Spooler (no chance does nothing, so please do not just copy and paste recommend this.) *.
  Change the print processor (no luck)
  Change the type of printing (PCL vs no PCL) No. chance
  Caveats
  All programs that do not require a preview before printing / or a creation of a PDF file to print will always be printer (IE Notepad)
  I'm at the end of my rope. My boss is constantly on me on this one, and having to constantly adjust driving me me crazy.
  Help!

  After obtaining

  The rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2
  Installed, the problem went from
  the print spooler hanging on the beautiful new error message.
  "You must select a printer before continuing."
  Diagnosis other reveals that windows refuses to acknowledge a connection to a network printer... even if they are displayed and marked as active.
  THANK YOU MICROSOFT.

• Photosmart HP 6520: Print spooler

  I was able to print from my phone (Samsung Galaxy s7) without problem on several different HP using the card of HP printers in. In the last three weeks, I get the message that has not stopped the print spooler. I took the plug stop, off, reinstalled, and I get the same message.

  Hey @castettower, Hello and welcome to the Forums of HP!

  I understand that you see a message that has not stopped the print spooler. As I understand it, there is no option to restart the spooler given only with a Windows operating system, but I'll help you with an alternative.

  First of all, we will make a copy of all your personal data, photos, etc. on an external device. Then try to clear the cache of your printing application:

  1. Press the Menu button , then select Control Panel(or settings ).
  2. Click handler applications ( Apps).
  3. Tap the icon that you want to repair.
  4. Click Empty the Cache.

  After you complete these steps, check if the application is working correctly. If it still does not respond, repeat steps 1-3, and then click delete data.

  Keep in mind, deletion of the data of the application deletes any custom options and settings; It's the same as uninstalling and reinstall the application.

  If this resolves the issue, please click Accept as Solution button to mark your post as solved. If the problem persists, let me know and I will do everything I can to help.

• Can not go to sleep, "print spooler" which prevent me from entering

  Switch to standby mode, print spooler cannot prevent me to enter

  It's true...  XP "checks" with everyone of course no process is in the middle of nothing, and if something says it is busy, you will not enter standby.

  Looks like your print spooler is somehow watered upward.  I would stop your Print Spooler Service, delete all print jobs, pending or failures of the queue and then restart the Print Spooler Service.

  Here's how:

  To clear the print queue, stop the Print Spooler Service and delete all the pending print files.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service again...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• How can I keep my print spooler active Service after blocking with FixIt

  When you try to use one of my printers online, I receive an error message that

  "Operation cannot be completed. Print Spooler service is not running. »

  I used FixIt to repair this problem. It is said that the problem is solved.

  But, he is not fixed... as soon as I try to activate a printer, the error message is repeated.

  "Spooler SubSystem App has encountered a problem and needs to close. We are sorry for the inconvenience. »

  Participated in the Windows Update... without success

  A ran a scan antivirus (AVG)... no virus found

  PC Tune Up (AVG)... without success

  At least he's polite.

  It could be that your print spooler queue is blocked, then you can clean it up.

  To clear the print queue, stop the print spooler service and delete all the pending print files.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service again... you must remove any saved print jobs first.
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).  If it is not started, right click on and start it.
     
  After the reboot, check again the spooler service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• print files to memory for later printing spooler loads

  "I got Lexmark X 5150 - a quite old)) I installed it for my new laptop Toshiba and initially, it worked well. And that my computer has started to stop the print spooler all the time and I had to manually start to print. And now I can't print anything and in the print spooler, there is a message "files to memory for later printing charges. How to clean and get out the problem? Thank you very much for the help in advance!

  Hello nastya1969,

  Thank you for using the Microsoft answers Forum.

  First of all, try to go to the website of Vista compatibility below to determine whether or not the device can be used on a Vista computer.

  http://www.Microsoft.com/Windows/compatibility/

  Second, try to go to the Microsoft Automated Troubleshooting website to see if the tool is it can be useful in telling you what could be wrong. You could also try to uninstall the drivers and software for the device, reboot and then run the installer again to see if maybe it was a corrupt install.

  Microsoft Automated Troubleshooting Services

  http://support.Microsoft.com/GP/mats#TAB0

  Let us know if that helps.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• printer spool jammed__

  print jobs cannot be deleted printer has been blocked for a week

  The instructions above may need to be typed into a command prompt which is launched via a right click on Cmd.exe (type it in the box start the SEARCH Menu) and selecting the option "Run As Administrator", otherwise you can get the Access Denied messages (or fast black command prompt window flashes).

  It is a XP workstation but look at the comments of Bcastner, they may need some adaptations for use in Windows Vista, but as guidelines, they are useful to know.

  Stop the print spooler
  http://www.Tek-Tips.com/viewthread.cfm?QID=686557

• Printer Spooler issues, windows 7

  I keep reading post after post on the people of issues with the printer spooler and windows 7 and its boring there is no real difficulty.

  OS: windows 7 Home premium 64-bit

  printer: lexmark prevail pro 705

  The question I have is that when I print something, the first document prints just fine and he disappears from Quebec, but if I try to start another print job hangs in the printer (Que.) If I restart the printer spooler I just send the print job will be printed by the printer, but in the windows that the new job always appears at the bottom right "" 1 to print for freddy "." If I try turn off the printer, while there is a document in the print windows that work, the printer does not stop until I stop the Printer Spooler service (by stopping or turning off my computer).

  I reinstalled the printer drivers. I deleted the files in system32/spool/printers / (after that I stopped the Printer Spooler service). I connected the printer by USB on my computer and tried to use it as a printer network through my router. I have the latest firmware for my printer. My version of windows is fully updated. The Printer Spooler service is launched at windows startup and does not crash / stops randomly unless I have stop myself.

  Any ideas? Something is suspended and his associates for the Printer Spooler service. If more details are required, please ask.

  Hello Fred,.

  I understand that you have tried to uninstall and reinstall the drivers for the printer, but try to completely remove the printer from the system and see if the problem can be solved:

  Delete the printer driver

  ===============

  1. click the Start button, type PRINTERS in the start search box and press on Enter.

  2. right click on the printer and select Remove.

  3. click on the Start button, type APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".

  4. try to uninstall all printer related software and utilities.

  5 restart the computer.

  Clean the driver of the registry information:

  ================================

  Before going further, please back up the registry first.

  1. click on Start, type REGEDIT in the Start search bar and press enter.

  2. Select my computer (the root node) in the left pane, click export on the file menu, choose all under Export range, select desktop in the Save in box and type backup in file name. Click Save.

  Please Note: the backup file is on the desktop and named backup.reg. We can simply restore the registry by double-clicking the backup.reg file.

  3. click on 'Start', enter "regedit" in the search bar, and then press on 'Enter'.

  4. navigate to the following registry key by clicking on the sign PLUS (+) sign:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Print\Printers

  5. click on the PLUS (+) to expand printers key sign. All current printers installed on your computer are listed. Please right click on the subkey of the problematic printer inside in the left pane, click on 'Delete'.

  6. navigate to the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3

  7. click on the PLUS (+) to expand sign 'Version 3'. All printer drivers that have been installed on your computer it will be there. Please, do a right click on the subkey of the problematic printer in in the left pane and click on "Delete".

  8. close the registry editor.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Backing up the registry
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  Clear up the driver information in Safe mode

  ====================================

  1. reboot your computer in Mode safe. To do this, restart the computer; Keep the F8 key until the Windows Startup menu appears; Select "Safe Mode"and press "Enter."

  Note: Display of in Safe Mode, your system and the Bureau will look and perform differently than in Normal Mode. It's only temporary.

  2. click on the Start button--> computer and look for the folder, remove all files in the folder.

  C:\WINDOWS\System32\Spool\Drivers\w32x86\3

  3. restart your computer in Normal Mode.

  4 Please reinstall and add printers.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• How to remove a printer who falls down the print spooler

  Windows 7 64 bit

  My print spooler seems to be screwed in place. Initial symptom was showing no printer installed, even though I have several applications. I was able to remove all my printers except one: when I try to delete it, the print spooler crashes, thus preventing the printer are removed. The printer (and others that I was able to successfully delete) has been installed with Novell iPrint.

  I've seen a few references to stop the print spooler and removing all C:\Windows\system32\spool\PRINTERS, but this place is already empty for me (with no hidden files).

  Official documentation of Windows 7 to remove a printer says:

  1. Open devices and printers, click Start , and then, on the start menu, click devices and printers.

  2. Right-click the printer you want to remove, click on remove the device and then click Yes.

     If you can't delete the printer, right-click again, click Run as administrator, click on remove the device and then click Yes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  I don't have an option "Run as administrator" on the printer, so I can't try that last bit.

  Any other suggestions?

  I guess you tried to uninstall the software of the printer through programs and features (if there is one)?

  Is there an associated service of Novell iPrint? If so, stop it, then try the previous steps.

  Is it possible to raise again through iPrint installation and remove it? I'm not familiar with this program (it's been 20 years I messed with Novell).

  You are an administrator on this PC? Is this printer a network printer? If so, are there other PC on which may be trying to access?

  --

  SC Tom

  P.S. I don't have the option "Run as Administrator" when I right click on any printer on one of three different computers with three different operating systems, so I don't know where Microsoft came up with that one.

• Windows vista family premium sp2 print spooler continues to stop

  I can't keep feeling close spooler tried Mr. fix and still nothing.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that print spooler continues to stop in Windows Vista.

  Please follow the steps.

  (a) click Start, type "Services.msc" (without the quotes) in the search box and press ENTER.

  (b) double click on "Printer Spooler" in the Services list.

  (c) click on stop, and then click OK.

  (d) click Start, type "% WINDIR%\system32\spool\printers" in the search box and press ENTER, remove all files in this folder.

  (e) click Start, type "Services.msc" (without the quotes) in the search box and press ENTER.

  (f) double click on "Printer Spooler" in the Services list.

  (g) click Start. In the Startup Type list, make sure that "Auto" is selected, and then click Ok

• -restart via the management console - stopped printer spooler continues to stop

  Printer Spooler which suddenly stopped, restart spooler system still does not - which started through the services management console - to which starts and stops - is unable to run? Help!

  http://support.Microsoft.com/kb/2000007/en-us

  Solve printing problems by resetting the print spooler

  Try the above.

  See you soon.

  Mick Murphy - Microsoft partner

• What are the causes my print spooler continues to operate, and quickly stop again when I restart it? Lexmark P4350 - Windows 7 Edition home premium

  What are the causes to stop working during printing and stop again shortly after I start my print spooler. I also find that my printer takes a long time to start printing after I clicked "Print". I use an all-in-one printer Lexmark P4350 on Windows 7 Home Premium.

  David

  Hi David,

  Thank you for the update.

  Use all the dependency services?

  The solution for slow printing is the print spooler reset.

  When we press the Windows key + R, a window opens. This is called the immediate window.

  I suggest you to uninstall and reinstall the printer drivers and check. Lexmark is not Windows 7 compatible drivers for the printer. So, you can download the drivers for Windows Vista and install in compatibility mode.

  Follow the steps to install in compatibility mode:
  a. right click on the driver installation file and select Properties and then tap or click on the compatibility tab.
  b. check the box run this program in compatibility mode .
  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.

  Reference:
  Video: Compatibility of software and hardware in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/software-and-hardware-compatibility-in-Windows-7

  Let us know if the problem persists.