To the help of two time Capsules, but a as a external hard drive only

I just bought the new Time Capsule 2 TB "ac" and created a new network home wireless with it (TC is connected by Ethernet to the Modem/Router). I also use this TC to my Time Machine backup. Now, I would like to use my old Time Capsule ' don't (dish, 2012) as an external hard drive in my network in order to make manual backups of various data by drag-and - drop. I donnot want to expand my network wirelessly with the old TC. How can I include in my network just like an external hard drive?

Very simple... Connect TC Old WAN LAN new TC... the old Installer TC mode bridge... and wireless off.

He then worked as an external drive in the network.

Tags: Wireless

Similar Questions

  • Can I use time capsule from Apple and an external hard drive that is connected to my Mac at the same time to save?

    I have an external hard drive (1 TB ADATA HV620) and a time capsule of Apple 2009. So far I have used the external drive-DATA to back up regularly on my Mac, but it uses one of my USB slots. I would like to start using the time capsule from Apple to everything back up, as it does so wireless, but I still want to be able to back up by using the ADATA hard drive occasionally. Is it possible to use two devices to back up or can I use only one device? Thank you.

    You can use the two devices, but Time Machine... If that's what you use to back up... can back up only to a disc at a time. So if you set up Time Machine to back up on both discs, it will support drive until one first, then the other after the first drive of the backup is complete.

  • How to set my time capsule from apple for my external hard drive backup?

    I installed a Time Capsule from Apple on my network.  It seems to work very well.  I need to use it to back up my external drive (if possible)

    Can someone give me directions?

    Thank you

    Jean S

    If you use Time Machine, open the system preferences pane, click Options, and remove the external drive from the exclusion list. It is not possible for all formats of volume.

    If you use a different backup product, see its documentation.

    (141941)

  • I deleted all my photos and music from my mac and moved to my time capsule. It still shows my hard drive as full? I have to format

    I deleted all my photos and music from my mac and moved to my time capsule. It still shows my hard drive as full? I have to format

    If you restarted the computer, which can help the system see the

    amount available content recently removed as free to crush.

    Sometimes, a reboot with a quick operation of the SHIFT key down, can

    help the system file check and minor repairs on start up.

    • Try safe mode if your Mac does not end commissioning - Apple Support

    A moment after this restart, you should see a login to continue

    If secure boot will be available. You could repair disk permissions

    in this mode, or use it for troubleshooting. Restart normally

    subsequently pressing don't all the keys, just restart. IF that is not

    help, then try this short method to rebuild the Spotlight index; It can

    Take the time to complete the process:

    • Rebuild the Spotlight index on your Mac - Apple-Support-link

    https://support. Apple.com/en-us/HT201716

  • My slideshow said opening program there is not enough space on I: but I: is an external hard drive. Why is it not open c:

    At the opening of my slide show program he says there is not enough space on I: but I: is an external hard drive. Why is it not open c: I have used before with no problems. Is there a way to force it to open it on my computers built in the hard drive?

    Hello

    1. what Slideshow program do you use?

    2. you try to open a slide show file or the program itself?

    3. If you try to open the file, then where is it?

    4. have you made a recent software or hardware changes to the system?

    If you are trying to oepn the file, then you can try to copy the file to the desktop and check if it helps.

  • How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate? I use Windows Vista backup program (Service Pack 2),

    How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate?  I use Windows Vista backup program (Service Pack 2), and I need to do backups plus two from other computers on the same external hard drive.  To do this, I think I would need to identify each backup file separate I know which file to specify if I need to do a restore.

    How can I accomplish this? The program does not seem to give me the ability to specify a file to which to write the backup during a given session files.  In addition, I do not understand why I can not see the file name in Windows Explorer - my files options are defined to be able to view hidden and system.  Would be grateful for any help you can provide, tonight if possible.   Best regards, Oliver for Norm

    Hello

    See this link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  • I have CS5 on my laptop. I lost the installation cd. Can I save CS5 on an external hard drive to reinstall?

    I have CS5 on my laptop. I lost the installation cd. Can I save CS5 on an external hard drive to reinstall?

    Moving to download, installation, setting up

    Hello

    Please see the installer direct download: Download Adobe Creative Suite 5 products

    You can download it whenever you want and run the installer.

    Kind regards

    Sheena

  • Windows detected new hardware wizard appears each time I try to connect an external hard drive via the USB port.

    Whenever I try to connect an external hard drive into a USB port, Windows detected new hardware wizard will appear. He then not recognize the external drive at all. It does not appear in disk management. In Device Manager, it is listed as a 'device' USB bus controllers not. Under "other devices", there the question mark yellow and says the device is not configured correctly (code 1). External hard drive works fine on other PCs. It's a plug-and-play device. Port and USB cable work fine with other devices. Just this external hard drive has never worked on this PC.

    Hello

    I suggest that you try to remove USB controllers to the clean boot state and control.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
    See also:
  • How can I remove the write protection from my photos to transfer to an external hard drive?

    I have Windows XP and I want to transfer my photos on an external hard drive, but I can't remove write protection. I right click and uncheck the box, but it changes on its own. How can I transfer my photos?

    Have you seen dialogue indicating files can't be copied?
    If_Yes_what at - he say and how have you tried to copy
    the files?

    Maybe the info will help you...

    OK... when the external hard drive is connected to your
    PC... admittedly with a drive letter to start.
    My computer.

    Once you know what that is... try to drive letter the following
    and let us know what is the result.

    Select (highlight) the file names of the photos you want to
    copy on the external hard drive. Right-click on the selected group
    (or the folder itself if you want that all the photos) and the
    menu choose... Send to... and choose the drive letter of
    the external drive.

    Then uncheck "read-only" you left click... "." Apply / OK?
    (it works in a lot also selected)

  • Time machine does not recognize my external hard drive Passport

    My 2009 iMac is 10.7.5 Lion BONES, 2.66 GHz, Intel Core 2 Duo, 2 GB of memory, 1067 Mhz.  I have 2.62 GB free on a hard drive 320 GB internal.

    My Passport external hard drive is formatted for Mac, 500 GB, and fully compatible with OSX 10.7.5.

    He worked well with Time Machine for four months and now is not recognized.  It is recognized by my Mac Air 2012.

    The Passport will run for about 10 seconds in the back to the top on Time Machine and then stop, with an error message, and then the icon disappeared from my screen.  Disk utility does not recognize.

    All that info and you are unable to share the message with us? Too bad...

  • The West WDH1CS10000 Digital My Book Home Edition 1 TB External Hard Drive

    After contacting a trojan virus, which I was able to get rid due to malware, my book was no longer recognized by my pc. It appears on the workstation

    as well as drive C, drive D, DVD RW drive e. Image Factory. My book came as F: drive but it does not open when I click on it. I disconnected and hung

    Once again, but with the same results.  It continues to blink and the Properties tab says it works correctly. Is it possible to reset it. I am a senior and can

    do a few things on the computer please keep things simple. LOL thank you for your time.

    Hi JackieFerrs

    It is possible that the virus has every firmware corrupted on that either its MBR (Master Boot Record). Unfortunately, the other means that your data is probably lost. But... before you'll start to panic please see below what you can do.

    Please visit this link: 'Western Digital My Book Home Edition 1TB_downloads' and...

    1. use the backup utility to backup your data if you have not done.

    2 use the software update on hard drive firmware update.

    3. use the software (all) link to download software for your Windows PC.

    4. download and install Drive Manager (if you wish).

    5. If still no luck on the connection that enables the link diagnostic tool to scan your drive for some questions.

    I hope this helps.

    All the best.

    Muzzy

  • LR4 ~ help setting up of so 2 computers share an external hard drive.

    Hi all

    I'm helping a friend set up his 4 Lightroom on his office laptop computers. Ideally, we would like the catalog on an external drive that we attached to the two computers. I already loaded the LR4 s/w on both, but put catalogs in the default location in the image file in a folder called Lightroom Photo.

    1. How can I change the default on the external drive?

    2 is what drive be interchangeable between the mobile and desktop?

    Any help will be greatly appreciated.

    Thank you

    (1) copy or move the catalog file, i.e. the file with the <  .lrcat="">extension and, possibly, previews, i.e. the file with the <  .lrdat="">extension on the external drive.

    I recommend to create a top level on the named external folder "catalogue Lightroom and saw" and established catalog and found there.

    Note: You can put the catalog where you want; It doesn't have to be in the default location. And, the catalog may not be on the same folder as the pictures.

    -On two computers - double-click the file catalog and Lr will open with her. LR will "remember" the location of the catalog. Later by default, Lightroom opens the most current catalog at startup.

    (2) Yes, but make sure that the drive has the same drive letter on both computers. If the drive letters are different, you will get the "missing image / file ' message.

  • How to tell the computer to change the timbre of time & date on all files from external hard drives?

    Problem caused by the time change this morning.  Internal drive is exactly 60 minutes off (earlier) of/that the corresponding files on external drives.  Problem always happens to changes in time.

    Hello

    Try these steps and check:

    1. right click on start.

    2. Select Explorer

    3. Select Folder Options > tools > offline files

    4 activate the offline files, and then click OK

    5. navigate to the files and folders on the external drive you want to synchronize

    6. right click on the files and select make available offline, click Next

    7. in offline files Wizard should start

    8. Select automatically synchronize the offline files when I connect and disconnect my computer

    9. click on next

    10. Select create a shortcut to the folder on the desktop offline files

    11. click on finish

    12. click on start > all programs > Accessories > synchronize

  • Flash DRIVE - through works of Time Capsule, but not directly to the Mac.

    What I want to achieve:

    -Access to the USB - stick when it is connected directly to the MBA with USB cable.

    The working configuration:

    -USB-drive ("coffee") connected to Time Capsule and used as an external hard drive to save the files (like huge-any libraries).

    Does not:

    -USB-player ("coffee") is directly connected to the MBA.

    Possible cause:

    -The drive is secured by a setting that I could have done on the Time Capsule and so only time Capsule can access.

    More information:

    Solved!

    Well, then shame on me, but it all seemed to give my user rights to access the drive... I thought about it while searching for the settings on the possession of the car.

    Solved!

  • Cannot access my backup time machine on external hard drive once I changed my hard drive

    Since I changed my hard drive on my mac pro book I can't access the time machine back up on my external hard drive. All the shows when I connect the hard drive, but I can't access it.  Any ideas?

    I use El Captain MacBook Pro (15-inch mid-2012),

    By changing the hard drive, you have also lost all preferences, including those for Time Machine. You can have success by cloning back from the old system to the new drive to get back them.

    Or, simply erase the backup drive, reconfigure Time Machine preferences, then let time Machine do a new backup.

Maybe you are looking for

  • Satellite U500-1F5: eco and FN buttons do not work after BIOS update

    Hello world I hope I can find a solution for my problems here. I bought a new Toshiba Satellite U500 (PSU9ME),I'm updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center. Last week I received an alert to updat the B

  • Lost the password for my iPad

    Separated from this thread. I'm on my laptop. I want to use my I - pad. but I forgot my password on my i - pad.  How can I reset or get password on my i - pad, if I can not open it without the correct password.

  • Launcher

    I'm eager to try another Launcher on my 6.0.1. system, but I would like to be sure, I know how to uninstall it before doing so. Where can I find the Launcher? And how is it installed? If it needs to be located alongside other applications, what is hi

  • (Redirected) Venue 11 pro - does not detect a different view

    Hello I have several of these tablets pro 11 place and none of the others have this problem.  It is connected to a dock and an external monitor via hdmi to vga converter.  It does not detect the external display.  The others work fine.  This one had

  • How to print several images and select like in windows xp when you right click and select print

    Hi, I have Windows 7 and I recently wanted to print something I that I was accustomed to Windows XP, when you right click on a photo and you can check which photos you want to print from a folder and choose the format of pocket or something I really