To use my computer, such as a fax machine with a printer wireless, I still need a phone wire connection?

With the HUP, you can use your computer as

a fax. but I have a wireless printer? should I still dial if I use my computer as a fax machine.


Yes, you would need a phone connection to use the fax machine.


Check out these articles:
How to send a fax in Windows XP

Use your computer to print, scan, fax

Tags: Windows

Similar Questions

  • Someone has dealt with a flashing icon of a printer or a fax machine with a camera that appears randomly in your toolbar

    Anyone dealt a flashing icon of a printer or a fax machine with a camera that appears randomly in your toolbar. This icon claims to be a mistake by microsoft and does not require my attention. However, this intefers with my programs and screen diplay icon. Anyone know how to fix this... Thank you in advance.


    1. What is the full error message?
    2. The message mentions that there is error in Microsoft?
    3. What is the version of Windows installed on the computer?
    4. Are you referring to the toolbar or the task bar?
    5. In which toolbar you will see the icon?
    Perform a clean boot that will know if any third-party application is causing a conflict and become a reason for the question. Check out the link and follow the steps.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    Note: once the diagnosis is made, follow step 7 of section to configure the computer to start the Normal start.
  • A friend used my computer and sync is set up with HIS email, and I would like to delete that and put in my e-mail address.

    I don't remember set up sync ACCT. But am not computer savvy (can get). Check Sync and discovered an acct is set, but not with my email. My friend used my computer and I don't know if she wanted to do, but now ACCT. is his email, and I would like to change this, but am afraid to delete all data and make a slurry of something already messed up.

    Use: Tools > Options > synchronization > ungroup this device

  • Using measure computing library UL (device USB-1208FS) with CVI


    I'm trying to implement the system of company Measurement Computing USB-1208FS ( in our test software tool which has been programmed in Ansi C using the CVI compiler.
    To make the first steps, I am building an executable based on the Ansi C «DaqInScan01.c» example code
    While I have no problem with the compilation of the code, the linker complains with errors shown below. Although the cbw32.lib is registered with my project, ICB seems not to be able to reference the functions of the library.
    What I am doing wrong?
    Is there the CVI samples available to guide me in the first steps regarding this device?
    I use WinXP SP3, CVI is version 9.01

    Thank you for your support

    Hello IEE_newsoft,

    Looking at the screenshot you posted, a recommendation is to make sure that the header file and library with the same name, also have you been able to call the dll or lib successfully in another environment, IE such as visual studio to check there is nothing wrong with the files. Also look at this Developers Zone, it shows you how use a third party dll of CVI and shows you how you can use either dynamic or static linking to call your dll.

    Hope this helps

  • Windows 7 Professional, I cannot stop using a password to connect. Nobody else uses this computer. How can I cancel with a password?

    I need no password protection. Windows 7 Pro does not allow me to cancel the need to use a. Who can be replaced?

    Here you go:

    1. press Windows + R key on your keyboard.
    2. Enter the following command and press ENTER:
    3 click your account name.
    4. uncheck the box that requires users to enter a password.
    5. click on OK.
    6. Enter your password when you are prompted, and then click OK.
  • OfficeJet 7500 has the configuration of the fax machine with 2 telephone lines

    I have an Officejet 7500 a. The phone is a double line, phone double issue. The 2nd line/number is the number of fax. There is also a DSL service on the line and an answering machine for two lines on a phone. There is no separate cycles for two numbers.

    For installation, I shared the line out of the wall socket. We're going to the DSL modem. The other goes to a DSL filter.

    I tried to hang the black line of HP filter, then the line-1 printer. Then, out of the printer 2 - ext to a separator with several phones, including one with an answering machine. However, all the features of line 2 has been removed from all phones. I guess the line black/printer fails to pass. However I could pass the test of fax,

    So I had the idea of dividing the two lines into individual lines, feed on the second line in the printer (using the HP black line) and then again, and then recombine the lines and send them on phones. Now all the features of two line seems to work for phones, but when I run the fax test, it does not say "you do not use the type of appropriate phone cord.

    It looks like this:

    DSL filter - Splitter-L1 - L1-Splitter (recombine) - phones

    -L2 - HP Black line - 1-line 2 - ext - L2-

    I don't know why it's a failure, or what I have to do to make this work?

    For completeness, the separator is a 3 line separator, but we have nothing on the line 3. It is divided as follows:

    L1 + L2 + L3 Splitter - L1 + L3 (effectively L1)-cross

    -L2 + L3 (effectively L2)-for Officejet

    -L1 + L2 + L3 (not used)


    Well, I seem to be at the end of the game. I tried sons of single line of the fax to the telephone/answering machine and fax test still does not work. I turned off also error correction mode and that made no difference.

    BUT it doesn't matter because the phones and fax all seem to work very well. I sent a fax to the service HPFAXME (several times) and it worked fine and in. The answering correctly and fax catch fax calls and ignores the voice calls. If someone meets the fax call they hear 3 beeps and the line is silent. In case, answering machine or direct pick-up on any phone, the fax is correctly. I also tried the FaxZero service and it worked fine.

    So, I will be content with that, even though the fax test fails. It bothers me because I do not let "loose ends" lying around, but since I can't read the mind of the engineers who designed it, and how they expected over this configuration, which I think would be relatively common, I'm just spinning my wheels.

  • Photosmart c6380 fax put in place - do I need and how to connect

    I have a photosmart c6380.  I want to use the fax feature. The present printer/scanner are ed wireless hook.   Do I need a fax modem?  If so what kind? How do I connect it?  Thanks in advance

    Hi matman69,

    Unfortunately, this printer is not configured for the fax.  You can scan a document and attach it to an e-mail.  There are pay sites on the Internet that will allow you to send {or receive} a document from your computer to a standard fax machine.  An example would be

  • Computer cannot connect via wifi with Lexmark printer x 4550

    Hi I have a lexmark x 4550 printer, I got a new modem network and now my computer will not communicate with my printer wireless. (it works with a usb cable connected to it)

    Moved from feedback

    Original title: impression of the printer

    Hi Charky,

    1. what version of Windows is installed on the computer?

    2. what happens when you try to connect to the printer?

    3. do you get an error message? If so, what is the exact message?

    4 have have there been recent changes made on the computer before the show?

    Operating system Windows am I running?

    I suggest you to refer to the links and check if it helps.

    How to identify a Wireless Communication problem and resolution tips

    How to reconfigure your inkjet printer to join your network wireless using the wireless setup utility

    You can also get in touch with Lexmark Support for assistance.

    Let us know the results. We will be happy to help you further.

  • Computer laptop Windows 7 can see the desktop of Windows XP, but cannot ping or you connect

    I've seen hundreds of threads describing problems similar to mine, but none of the suggested fixes worked in my case so I'm starting a new thread.  I bought a new laptop with Windows 7 Home Edition.  My setup before the new laptop was as follows:

    Cable modem router NetGear WGT624v3---> desktop Windows XP Home Edition SP3--->

    I have set up portable Win 7 with the same name of the Office XP Workgroup.  The username and password are the same on both.  File and printer sharing is enabled on both.  The XP desktop laptop Win 7 in the workgroup in my network places.  It can successfully ping the laptop Win 7.  It can access shared folders on the Win 7 machine with no problems.

    My problem is that the connection seems one-sided.  Laptop Win 7 will usually display the XP desktop in the network when Windows Explorer opens.  It still display the XP desktop in the network map in network and sharing Center.  However, I can't map a network drive on the XP desktop by using the name of computer or IP address.  I can't even ping the XP desktop.  But if I start the Office XP in Safe Mode with networking, the Win 7 laptop can ping and access shared folders on the XP desktop computer.

    I tried to disable the firewall on both machines.  I confirmed that the appropriate ports are open for sharing files on both machines.  Safe mode they suggest the problem lies with Windows XP, but I'm running out of things to try.  And the various solutions I've seen in the Strait of similar positions as urban legends.

    Hi Meghmala,

    Thanks for the great tips.  You got me in the right direction.  After configuring my XP machine for a clean boot I have to ping, see and access shared files on desktop XP from Win 7 laptop.  Then, I have considered the services and startup programs that has been disabled for the clean boot.  I found a Cisco VPN service which I had previously used to fix on my office intranet.  I disabled this service and the corresponding to my next selective startup startup file.  I was still able to connect to the computer to Office XP.  I think that the VPN service was the cause of the problem even though I had no open an active VPN session.  Thanks again for this problem.  I tried to solve this problem for weeks.

  • Cannot connect to a WPA - PSK with WLAN DW1520 Wireless-N particular, but can when no security is set to wireless. How can I get the card to use WPA - PSK?

    I have a DW1520 Wireless-N WLAN Half-Mini card in an Alienware M17X10. I am trying to connect my home through a TRENDNet TEW-435BRM access DSL issue in WPA - PSK.

    I was able to get the card to use the accounts wireless WPA2-PSK and WPA - PSK in other areas is not a problem directly related to WPA - PSK.

    I can get it to connect to the network when the diffuse TRENDnet without security (free release) and when directly plugged into the wireless router, cable - but every time I go to dissemination of WPA - PSK it can't connect?

    While in WPA - PSK the WLAN card can 'see' the network and wireless router can see the 'computer' (and is a 'trust machine'). I have one couple of other previous model Dells connected to the network without problem or needed changes if any ideas why I would have questions here?

    The driver installed is the 'last' to

    I tried to restart the router and the computer without success. I use Windows Firewall.

    No bright sparks that can point me in the right direction?

    Thank you



    Try resetting the password in the part of the router wireless, then copy and paste it to the wireless card.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Can I use the same windows on my virtual machine?

    I had windows pre-installed in my dell laptop (Latitude E6420). I did not have the cd key but I extracted using a program called Magical jelly bean key finder. Now, I have the following information on my windows installation

    Windows 7 Professional Service Pack 1
    Product no.: XXXXXXXX
    Installed from media "OEM."
    Computer name: XXXXX
    Registered owner: XXXXX
    Registered organization: Microsoft
    Now, I want to install linux on my machine and use the current windows in a virtual machine inside the linux host. Is is possible if I completely uninstall this windows of my computer and reinstall the virtual machine with the same key?
    I'm not very familiar with this also can someone guide me what are the steps I have to take if this is possible.

    Hi Andre,

    Thank you for your answer, but this does not completely answer my question. I also read that OEM installation does not install the same windows on another machine (virtual machine is like different machine even if I do this on the same machine) and installation of the mine is OEM type.

    More important still, how install windows in the virtual environment? If I format the computer and install linux, in addition to this install virualbox and install inside windows that use the cd - key and it will work. ? I doubt it because the windows is already activated in this machine.

    The extract of the contract (EULA) for Windows 7 and applies to the retail and OEM of Windows 7 versions. So, Yes, you can reinstall it in a Virtual Machine.

    Yes, you will need to format the machine under Linux, then reinstall Windows 7 in a computer program virtual suitable as Oracle Virtual Box 4.2, VMWare Player 5.0 or VMWare Workstation. You can then use the product key located on the COA sticker to reactivate the license.

  • Error: The computer cannot communicate with the printer; printers HP officejet 4500 wireless all-in-one

    Original title: hp officejet 4500 wireless all-in-one printer / moved, unplugged and replugged and then in the new House when turned on laptop hp, now it will not find printer

    I need help with getting my hp laptop to communicate with my printer hp officejet 4500 wireless all-in-one, I moved and when I unpluggled everything and moved, when I tried to print something now my computer says it can not communicate with my printer, even if in the control panel it shows my printer has been verified as my default printer I don't know what to do?

    What is the version of Windows installed on the computer? For example, Windows 7, Vista, XP

    Please answer the question above so that we can better guide you.

    For now, you can read the following article.

    Printer in Windows problems

    Check if it helps.
  • Computer will not print wireless or network

    original title: my computer is anti-social

    It will not print wireless or network with other computers in the House.  any advice?


    1. what version of Windows is installed on the computer?

    2. were you able to print earlier?

    3. are you able to print via a wired connection?

    4. What is the brand and model of your printer?

    5. are you aware of any changes made to the computer, before the show?

    Method 1:

    Temporarily disable your antivirus software, and then print.

    Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

    Method 2:

    Check out the following link.

    Printer in Windows problems

    I hope this helps.

  • I still need a fax of legal documents. What are the options for p-1030 pavion with Windows 7?

    What are the options for p-1030 pavion with Windows 7.  I still need a fax of legal documents?

    I would like to add a modem fax boarding card.  Is this possible with windows 7 or HP?

    Linda, welcome to the forum.

    I suggest try Windows Fax and Scan (Control Panel / devices and printers / Fax) to see if it does what you need.  It allows to send and receive faxes without a fax machine.  When you click fax it will open and give you instructions on how to configure the application.

    Please let us know if this solved your problem or not.

  • A cleaner PC interrupts my programs whenever I use my computer

    Original title: network adapter wireless network Ethernet NIC device

    PC cleaners interrupted my programs whenever I use my computer... they are not wanted, nor have they been invited to. How can that I get RID of them?

    Please advice Me.


    PC Cleaner and PC Cleaner Pro are malicious software and must be eliminated.

    How to remove PC Cleaner<- check="" the="" removal="" methods="" here="" however="" be="" aware="">
    malicious software can turn so it's maybe not accurate.

    PCclean - also check the methods of hair removal here


    This tool troubleshooting for Windows 7 - Vista is very similar - use XP RUN instead of start.

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be harder to detect as
    the cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to If she finds something or not does not mean that you should not
    check with the other methods below.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free

    SuperAntiSpyware Portable Scanner - free

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool

    Microsoft Malicious removal tool - 64 bit

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.   <-->  <-->

    Choice of PCmag editor - Prevx-, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).


    If necessary here are some free online scanners to help the


    Original version is now replaced by the Microsoft Safety Scanner

    Microsoft safety scanner


    Other tests free online


    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7


    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)


    If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)

    How to do a repair installation to repair Windows 7


    For extreme cases:

    Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
    This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
    uses aggressive methods to detect these threats, there is a risk that it can select some
    legitimate programs for removal. You should use this tool very carefully and only after
    you have exhausted other options.


    If you are in North America, you can call 866-727-2338 for virus and spyware help
    infections. See for more details. For
    international information, see your subsidiary local Support site.

    Microsoft support - Virus and Security Solution Center

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Maybe you are looking for

  • Ethernet save after update of the OS

    Hello I was wondering if it is asked to fill out an Ethernet back to my Time Capsule after each update of the OS? I ask in what concerns assuring him a 'reliable' return to the top. Thank you very much!

  • Why Ctrl + arrow left and combinations of keys Ctrl + right arrow changed?

    All versions of Firefox prior to v10, ouCtrl Ctrl + left + right while the cursor was in an editable control would cause the cursor to the beginning of the next or previous word, respectively, as is the standard in practically all the facilities I've

  • HP2542 said in offline mode when I want to print Winsows 8.1

    I am running Windows 8.1. My printer is HP Deskjet 2542. When I try to print, I get a message printer offline. I have a LenovoG50.

  • Acer Travelmate 5744z does not start, Option not Bios

    Hi,IAM having an Acer Travelmate 5744z laptop and it installed Windows 7.Yesterday I forgot to stop the laptop while I sleep and today morning when I turned it on it started reume windows, then I accidentally pressed the power button and it is just o

  • HPE HP8 1360t DVI connections and two monitors

    I recently bought a new HP8 HPE 1360t directly from HP. I finally got around to get set up last night. I like almost everything about it, EXCEPT to try to figure out how to make it work with two monitors. Before buying, I contacted HP sales to confir