To validate a snapshot which option I choose.

Similar Questions

• my laptop keeps going to start page.__No regardless of which option to choose, that is to say. safe mode, safe mode, safe mode with command prompt, the last known good configuration, start windows normally, it's always the same

  my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw this post before and the invloved boot cd solution. I have not a cd ROM is there another way to solve this problem. Thank you people

  Thank you for taking the time to make this post very informative, excellent. Without the machine test myself that I can't be sure, but based on the age of the computer and what you wrote I suspect for lack of material. It could be something simple like the hard drive or RAM or something more serious like the motherboard. I wouldn't recommend replacing any material on such an old laptop.

  As long as the hard disk has been physically, you can recover your data easily. If the hard drive has failed, then you will need to send the drive to a professional drive savers data recovery company. It is quite expensive ($500-3700), but they can usually recover your data. Some insurance policies cover also, professional data recovery in order to check with yours. But let's be optimistic. ;-)

  IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company.

  I'll give you the information on how to test the hard drive to see if it's good physically and how to recover data when you can't in Windows but in doing these things requires a certain level of computer skills. You know yourself the best and that it would be better to take the laptop to a competent local professional. If you do this, do not use a type of BigComputerStore/GeekSquad of the place. Get recommendations from family, friends and colleagues.

  A. test equipment
  
  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. You will probably need to change the boot order. Your Dell can give you a temporary boot menu if you press F12 as the computer starts. If so, use your arrow key to select the CD drive. Otherwise, press F2 to enter in Setup (BIOS) and change the order of boot on the CD drive first. If the disk fails all physical tests, it must be replaced. Although readers of the laptop cost around $60, you should really consider if it is to put money in such an old machine. You can replace the disk, but the laptop is definitely at the end of its normal life and something else is doomed to failure.

  There is information about the RAM test and other materials here:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  B. retrieve data detach a healthy disk when you are unable to Windows
  
  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, which is an engraver of CD/DVD OR a USB stick with a capacity to hold your data OR an external USB hard disk formatted FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  C. recovery of activity for the future - http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - Don ' t Panic!

• Which option to choose for PL/SQL?

  Hello
  I just brought CD for oracle 9i server.
  
  It shows 3 options
  
  Oracle database
  
  integration and management of the oracle
  
  Oracle 9.2.1.0 client
  
  should which option I choose. I want just the components associated with PL/SQL. That's all.
  
  Published by: closeguy2005 on May 1st, 2009 05:53

  Why you install an old version?

  Download and install at least 10 g 2, or even to 11g.

  Incidentally (I almost hate to ask this question) what operating system do you use?

• Catch Erros or that they fail silently? Which Option to choose?

  I heard that there is a problem with the Flash players when dealing with errors of execution, so I all advnatage if I take the error
  in the catch block, create an alert class and display it to the user?

  
  Above this option to let happen to fail silently.

  
  Please share your ideas on this.
  Thanks in advance.

  There is no rule of thumb for this. It depends on your condition. If you encounter an error for which you wish to inform your user name (may be giving them alternatives or simply asking them to try again later), you can choose to capture and display pop-up windows. If the error does not affect your user name, you can choose to let them fail silently.

• Could not start up - which option to choose?

  When I started my computer, the message "the last attempt to restart the system from its previous location failed.  Try to restart again? "I then 2 options" Delete restoration data and proceed to the system startup "or"continue with system restart. "  What happens if I select the first option?  What data do I have to restore?

  Hi mojo29,
   
  Follow the steps listed in this article to resolve the problem:
  Windows XP stops responding at the Welcome screen

• match volume - which option should I choose?

  I've got eleven files wav in a show, and I have them in the box volume of correspondence in the hearing. I do not know which option to choose; for example match to peak, loudness, etc..  Please, some kind soul, advice in plain language for an old soul.

  You are an Angel, and if I had the power, I would reject some wings on you!

  Thank you very much

  Nancy

• In the tab "install windows" to reinstall Vista I have to choose the "country and region", "time and money" and "keyboard", but there are no options to choose in the "country and region.

  Restoration of the system, Vista Home Premium re installation problems.

  After doing a system restore and restart the laptop, I get on the tab "install windows" Reinstall Vista and I have to choose the "country and region", "time and money" and "keyboard", but there is no options to choose from when I click on the tab "country and region" so I cannot proceed with the installation.

  Hi Cbx_banananuts-Walter,

  You can try to reinstall Windows Vista again and check if the problem persists:

  Installation and reinstallation of Windows Vista

  Hope the helps of information.

• Dell Inspiron 531 - summer pc try to restore factory settings and hit the F8 key after close to a dozen times. I never see the advanced options to choose the factory restore. HELP please...

  tried to restore factory settings and hit the F8 key after close to a dozen times.  I never see the advanced options to choose the factory restore.   HELP please...  I'm following indications out of Dell's web site as well.    UGH

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  If you have problems with the process of recovery of Dell, contact Dell at the link above.

  It's Dell recovery, not Microsoft software/process of.

  See you soon.

  Mick Murphy - Microsoft partner

• Minecraft mods - no option to choose my archives online

  Original title: Minecraft Mods

  I am trying to download the mod too many items for Minecraft 1.8. I followed a tutorial and at some point, I need to open a JAR file with my archives. I right click and go to open with, and my archives does not appear. All that comes is Java (TM) Platform SE binary. I click on it and nothing happens. I try to understand why it does not give me the option to choose my archives online, but I turn upwards with nothing. I was looking around on my computer for my archives, but I can't find anything. I use windows 8. I would appreciate help from someone.

  Hello Nick,

  Thanks for posting your query in Microsoft Community Forum.

  Since you are facing any problem related to the Minicraft game or need information, I suggest you to report your query in their support for the best support site:

  http://www.minecraftforum.NET/topic/883157-Minicraft-help/

  Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• I have 3 radio button options to choose, but I want only a certain one for calculating sales tax. How can I assign a calculation to an option button?

  I have 3 radio button options to choose, but I want only a certain one for calculating sales tax. How can I assign a calculation to an option button?

  Ok. Let's say the name of the radio button group is "Radio1", the value of exports in this field is '3', the name of the subtotal is "Subtotal" and tax rate is 16%. You can use this code as the custom calculation of the tax field script:

  Event.Value = (this.getField("Radio1").valueAsString == "3")? Number (this.getField("Subtotal").valueAsString) * 0.16: 0;

• How can I purchase Adobe Edge animate for a month? There is no option to choose anywhere.

  How can I purchase Adobe Edge animate for a month? There is no option to choose anywhere.

  I have never done this, but I read that when you subscribe to a regime of selected cloud, such as a program, you can select annual paid every month, or every month

  The monthly package can then be cancelled at any time without penalty... but this IS NOT automatic, you must cancel or you will be charged each month

• Hi, I want to install my cc, cc in lightroom photoshop and bridge to another drive to C: /... I can't find any option to choose my destination with my creative cloud software. Can you help me? Sorry for my bad English.

  Hi, I want to install my cc, cc in lightroom photoshop and bridge to another drive to C: /... I can't find any option to choose my destination with my creative cloud software. Can you help me? Sorry for my bad English.

  With the application of CC open, select the gear icon in the upper right, and then choose Preferences.  In the preferences of the screen select creative cloud and then look for the drop-down list installation location

• I need to buy Photoshop, Indesign and Illustrator. Which plan to choose?

  I need to buy Photoshop, Indesign and Illustrator. Which plan to choose? Fact the ' comprehensive individual plan at a$ 49 p/m include Indesign? Their description of this don't plan that States "last Photoshop, Illustrator and more, most characteristic of the clouds"... what I "and more"! Thank you

  Their description of this don't plan that States "last Photoshop, Illustrator and more, most characteristic of the clouds"... what I "and more"! Thank you

  A lot of people seem to be confused by this incomplete wording, short on the front page of cloud.

  Creative test free cloud & plans: Adobe Creative Cloud

  Complete cloud inclusions appear elsewhere on the Adobe website

  Explorer Adobe desktop applications | Adobe Creative Cloud

  If you need 3 or several apps for membership full cloud (comprehensive individual plan) is the way to go.

• Displays the properties of all my .dll files are applications of unknon, which gives me an option to choose an application to open it with. I need help. thxs

  Here is an example of the properties of one of my .dll files: c:\windows\system32\microsoft.ManagementConsole.dll - file Type: unknown Application - opens with: unknown Application - (if I try to open it, it asks me to choose in my list, or search the Web for an application)

  My problem is, I don't know what the hell I do! Laughing out loud. I don't even know now why I even noticed it.  Anyway, I guess my question is 1) should I I even try to choose an application to open .dll files, or is it a security setting, so I won't be able to open the files that I have no business opening? (2) my properties should apply real knon, instead of saying we don't know? How do I find a list of file names that tell you what you should choose to open different applications or extensions?

  I appreciate all help. I fear I can screw up my laptop and I'm on League when it comes to such things.

  Thanks again for any useful information. :)

  Michelle

  What you see, it's normal.  It is not possible for a user to directly open a .dll (Dynamic Link Library) file.   The file contains functions that can use other programs, but it cannot open or run by itself.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Choice while conversion? Which one to choose?

  Then I played with converter and am trying to figure out what options I have do I choose as a virtual final conversion physics?  can someone help me decide which are the best?

  I've take the virtual machine and run it on a different physical machine all together so the old physical machine will be gone, and the virtual conversion will be left.

  I understand that I should probably use sysprep to generate a new SID by choosing Customize the identity of the virtual machine.

  If the physical machine is not existence more must I use customize the identity setting and use sysprep, or should I even bother with that and just create it without the customization?

  To achieve this for good any help will be useful.  Advice please.

  No, the Windows SID is "changed" when you install the operating system.  Or when you run NewSID later or similar utility.