Toll-free indicated what power disconnected from the Satellite L30-134

Similar Questions

• For the Archives: The upgrade of the Satellite L30-134

  I'm one of those old cell phones off a friend who had retired as being obsolete.

  However with a little time and money, it is possible to upgrade to a very usable machine.

  Not a power by any stretch but perfectly adequate for browsing the internet and watching videos (about 720 p watchable) standard definition etc.

  So as the search of these forums for more information for this project, I found a lot of conflicting advice, and some of my questions were not answered at all. I hope by documenting my experiences here I can help someone in the same position in the future.

  * Model *.

  This machine is the Toshiba Satellite L30-134, part number: PSL33E-00E013G3. It's probably very similar, but not necessarily the same as the other models L30. No invert them.

  * Original configuration *.

  Processor - Intel Celeron m 410 (Cache of 1 MB, 1.46 GHz, 533 MHz FSB, Socket M). It is a simple version of the Core Duo (Yonah core) processor core. It shares nothing in common and is not swapable with the previous generation Pentium M or processors Celeron Mr. He is also incompatible with the next generation of Core 2 Duo/Solo and Pentium and Celeron processors derived from these.

  Memory - A single 512MB SODIMM PC2 - 4200 (DDR2-533 MHz). This differs from the previous generation of DDR and the next generation of DDR3. The controller memory only supports single channel mode. There is no loss that the FSB of the processor is not fast enough to take advantage of the dual channel anyway.

  * BIOS *.

  My laptop came with very old version 1.3. Toshiba provides the latest version (3.10) for download. This is reported to be buggy and mess with the profiles of fan so I decided to leave it alone. I can confirm that my updates work without updating the BIOS.

  * Updates *.

  Processor - I swapped the Celeron for a Core Duo T2350 (1.87 GHz). Everything I read that all the Yonah core Core Duo/solo, Pentium and Celeron with a FSB of 533 are compatible. The FSB 667 models are not.

  The Core Duo T2450 at 2 GHz is the highest performing compatible processor but double the price on eBay. I paid just £12 (used) for the T2350 so there is really no reason to go down now, all of these parts are obsolete.

  RAM - there are 2 slots on this machine. Toshiba State a maximum of 2 GB, 1 GB in each slot. Unfortunately, the memory controller is very picky and survey of the weird errors, unless you get just the right ones.

  There is not enough information to understand it so for me it was a process of trial and error. Fortunately, I found an online retailer that guaranteed compatibility in 100% and returned by mail for free.

  The second pair of Poles worked well.

  Thanks for sharing!

• What you can say about Satellite L30-134

  I have to buy laptop for office work? and I choose Satellite L30-134? What do you think? It's my first time when I buy the laptop... I have only 700 maybe $ advise you something else? and second question why portable seria L30 have only 1 year warranty, and what cost per the warranty extension?
  My English in not very good, sorry. Thank you for your response.

  Hello

  The L30-134 is a portable simple to office applications and internet usage.
  But it s not suitable for hardcore gamer because of the hardware specifications. As far as I know that the laptop provides Intel-Celeron-M (Yonah) 410 1.5 GHz processor and ATI RADEON Xpress 200M 32 to 256 MB shared video memory graphics card.

  The standard warranty is 1 year and if you sign up on the page of Toshiba notebook you will get a 2-year extension

• Questions about the use of the battery and power on the Satellite L30-134

  Hi all!
  I have again L30-134. The questions are:
  -May this work of his power without battery installed on the computer?
  -a this model to charge the battery in time to work on machine plagged to supply AC circuit?
  Kind regards
  Andrew.

  Hello

  -As you know, if the battery is faulty you can always use your laptop with AC power only. Answer is: YES.
  -Here, I agree with explanation s chain. The battery will be recharged but slower.

• Problems upgrade memory on the Satellite L30-134

  I just bought 2 x 1 GB memory for my L30-134 PC4200 and installed that they work fine in the BIOS, see and read as they should do, but when windows starts up it will crash with the two modules are installed, don't ever get to the screen with the loading bar crossing and then I get the blue screen.

  I forgot to take note of the error code, I'm afraid... (Silly I know). If I remove one of the modules and module installation original 512 with just 1 the 1 GB ones that it works perfectly. BIOS has been updated to the latest version 3.10, and again, I get the same problem...
  because everything looks good go in the BIOS I think that its more likely to be a software problem (windows) any maybe some damage data in the registry or maybe a virus... anyone have any ideas?

  In addition, the laptop is actually my step son and he really wants to have the CPU improved Celeron 410 to one that is a little faster. When we look at first in this we was told that several processors are compatible (although not really worth the hassle of installation) they were cel m 450 2 GHz, dual core t2060 and t2080 pent, as well as the core duo t2250, so he bought the t2250 and it wouldn't surprise, or should I say it power on with no display and the stopcock and just epeated cycle. So didn't take is not a genius to establish it was not compat...

  I know the t2080 are used in of the L30 and 1.73 533 FSB with 1 MB L2 cache-65nm and do walk. The t2250 is identical apart from the L2 cache is 2 MB and deepening varies from c to MB depends on when you bought it... because oe it already has the CPU it will sell and use the money to purchase one that will work. If anyone has any info that could help to ensure that it doesn't end up going round in circles I would really appreciate it...

  Oh and just to make laugh you all he was member of staff line Toshiba tech that had told him that the CPU would not work and that the L30 managed to take 2 x 1 GB memory and not once mentioned that there may be problems with two updates...
  Issues such as neither soddin work... lmao

  Are you sure;?  :|

  On the website provided in your posts, I found this info:

  _Radeon Xpress 200M_
  Memory interface:
  -UMA mode operation requires no additional memory
  -* DDR and DDR2 Support *.
  -* DDR speed * up to the * 400 mhz *.
  -* Speed DDR2 * until the * 667 mhz *.

  _Radeon Xpress 200_
  Memory interface:
  -UMA mode operation requires no external graphics memory
  -+ Variants available with single or double channel system memory support.
  -* Support for DDR or DDR2 memory *.
  -* Memory DDR * speeds * DDR400 *.
  -* Memory DDR2 * speeds * DDR2-667 *.

  concerning

• What is disconnecting from the computer

  I am a student of the University

  When you shut down Windows, all the programs you were using close, but the computer is not turned off.
  See sign out of Windows

• What happens if you use your computer, updatesare being downloaded, and you disconnect from the internet?

  What happens if you use your computer, updatesare being downloaded, and you disconnect from the internet?

  Nothing happens.  The download is incomplete and the updates are not installed.  The next time you go on the site to update or the next time that your automatic updates are are that the updates will be downloaded again.

  John

• I disconnected from the home group, but when I try to join the homegroup I can't because I put a password and I forgot the password. What should I do?

  Hello. I disconnected from the home group, but when I try to join the homegroup I can't because I put a password and I forgot the password. What should I do? TQ

  Hello. I disconnected from the home group, but when I try to join the homegroup I can't because I put a password and I forgot the password. What should I do? TQ

  Where can I find my homegroup password?

• When you reply to a post in a yahoo chat room, I suddenly said... you have been disconnected from the chat because you have accessed YAHOO! MESSENGER from another computer or device? That is what it is?

  When you reply to a post in a salon political discussion of yahoo, I suddenly get the message... you have been disconnected from the chat because you have accessed YAHOO! MESSENGER from another computer or device.  I did not as far as I know?  Thank you, Charles

  Hello

  The message "you have disconnected because you access Yahoo! Messenger from another computer or device." appears when you try to connect twice with the same Yahoo! ID. Someone knows your password and he at the same time connecting with you or you have Yahoo Multi Messenger and accidentally logging in twice. One solution is to change your Yahoo! password or not to use Yahoo Multi Messenger with the same ID.

  Good luck!

• Wireless router is disconnected from the PC (s) during the use of Firefox 37.0.1

  This problem occurred for the last 2 weeks whenever I use Firefox on each of the 2 PC's I use it every day. The problem may occur a few minutes after the start of Firefox, or it may be hours of continuous use before the connection is lost. It's okay if I'm in Firefox by itself or have the background applications running, but without a doubt requires Firefox runs before I see a problem.

  Configuration: WIN 8.1 and VISTA 64. the two latest updates.
  LAN: cable modem and Belkin wireless router; together with the latest firmware.
  Firefox v37.0.1 without add-ins or modules. Start page is 'empty '.

  Symptoms:
  Status bar Windows shows that I'm disconnected from the router.
  Router and the modem status LED shows that I am connected to the internet. Same thing for the VICTORY of the network status app. It shows no connection to router.

  The problem can be temporarily fixed by power cycling the router. Or, in the meantime just a random delay the connection may (or may not) be restored on its own.

  I also use a standalone PC application that streams the text given in short bursts and runs all day (no video or music... just short lines of text) with no problems until I launch Firefox in the background. Then he can go a few hours before the connection to the router is lost. I also often watch videos on my Tablet without the router problems. While typing in this issue on a PC I was disconnected from my router. I'm hoping to get some suggestions as to what to inspect or modify. Thank you!

  Fred, I had to leave the House early this morning and had no time to dig a cable long enough to reach my modem to try your suggestion. But, what I did was half of your suggestion. I pushed the reset bit recessed on the modem and left the House around 08:30 with Firefox running on both computers. Seven hours later everything is normal. No router disconnects and I gave a very good workout system.

  I have also now initial notice that connects to the web sites are faster.

  It is obviously a logical explanation for what was going on, but to an outside observer (), I see absolutely no logical link to the 'solution' for the rest of the universe. I won't lose sleep on. And I'm going to ask you more specifically when the next puzzle problem occurs! Thank you, Fred!

• SOLUTION for your HP printer disconnect and/or constantly disconnecting from the network

  If you are having a problem printing, scanning or fax with any HP printer because of this be disconnected and constantly disconnecting from the network, here again is the fix!

  I thought that this all after several failed attempts with HP Support, my Internet access provider and various troubleshooting tasks including reinstall the HP software and more and more.  Well, through self teaching on internet and exhausting search for 6 months, I FINALLY thought to it.  OMG!  I'm a paramedic (not IT) and a little computer but far not an expert.  I have all of you here!  Nobody seems to have the answer, but I'm sure that I'm doing it to 97%.  Whatever it is, if it please answer and let me know that it worked for you!  :-)

  It doesn't matter if your printer is installed cable or wireless.  You don't reinstall your software, no recycling power of your printers or your router/Modem.  Your printer is unstable on the network and continues to log out or disconnect from the network it is NOT because the software is glitched, it isn't a firewall problem by saying, is not a router problem, is not a problem with your power cord, because most networks use a 'Beach' and IP addresses for security reasons This kind of "cycles" the IP addresses of the devices to reduce the risk of an attack.  A printer is not a threat, but the 'network' don't own human intelligence, so he does not know this.  Here are my step by step instructions on how to basically your printer address IP (static IP) instead of change back through a cycle so drop your printer on the network or disconnected.

  Funny, if you're someone who has had the elements in your print queue, they will not print, and you turn your printer off and on again and suddenly your print... well documents, join my club.  The reason it works is that when you turn on the printer, it starts with the same IP address before cycle.  If you are someone who is sitting there for a while and all of a sudden your printed documents without changing you something... it is because through the cycle of change of IP address, it hits your printers IP address and the network would allow him to print.  Not very funny, I know.  It took me forever to figure out why my printer would print sometimes, but not always.  Since I thought at this point, I can SCAN, PRINT, and use all the features of my HP software installed like HP, Photosmart Essentials Solution Center.

  On your printer, go to menu/Setup/network and press OK.  In the network menu, print a "network configuration page" so you can see the IP address and other settings of your printer.

  Now, back to the main menu on the screen of your printers.  Or you can go to your web browser and type the IP address using decimal numbers too and this will take you to the web page of your printers.  Choose: setup\network, then press OK.  Look for the IP settings and press OK. Choose "manual" instead of "automatic". Manually enter the IP address it as well as the default gateway that you can see the Network Setup page you printed earlier.  Note: If you manually set the IP Address of the printer, make sure that it is outside the range of your router's DHCP. Otherwise you might encounter a problem with IP addresses on your network duplicate. (If you don't know how to do this, write back and I'll explain).  Don't forget to click "save changes".  Now, restart your computer, and print just what you want.  :-)

  A trick I often use with DHCP network printers:
  In printers and faxes, right-click on the printer and select "Properties".  Click Add a new port.  Choose standard TCP/IP port configured for the host name of the printer. Read the host name of the network printer configuration sheet.
  
  Using my method means that you always connect to the printer even if its IP address changes (which can happen with the dynamic configuration). This does not jeopardize the security of your network.  It shows just your printer to stay put and stop traveling the highway of IP address.  :-)

  The DHCP range is the range of IP addresses that the router distributes automatically as devices to join the network.  The DHCP range is determined by the router and each brand has a range that is set at the factory (which can be changed by you).

  Default value for the DHCP of your D-link is 192.168.0.100 to 192.168.0.199.  Thus, outside the DHCP range est.2 a.99.200 a.254.

  Is a handy cheat sheet attached.

  You can change this interval by entering the router settings page - type the router's IP address in a browser, enter the login information and access the DHCP parameter area (varies depending on router, hunting around).

• Why is that every time I open an application that my phone disconnects from the wifi

  Everytime I open an application that my phone disconnects from the wifi.

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• Tecra A2 crashes when you are disconnected from the internet

  We have a customer with a Tecra A2 provided by ourselves that, after 5 months without a problem from time to time, hangs when it is disconnected from the internet.
  Reboot the laptop and the internet can be found sometimes up to 20 times and then it blocks again when we disconnect from the internet IE. A Ref post causing VOIP problems were found and the software disabled and disconnected hardware. No difference. Running XP SP2, IE6, Kaspersky Anti Virus, Tiscali ISP ADSL, modem ADSL Tiscal (a new requested just in case). A lot of work to do and lose valuable time with customer problem.
  Thank you

  Hello

  It seems that a 3rd party software causes this very strange problem.
  You suggested that VOIP is causing the problem. Well, the problem is that Toshiba doesn't support any 3rd party software and applications.
  What I can suggest is to check the Event Viewer logs. You will find all the errors that appear on the OS. Double-click the error and you should see the description of Microsoft.
  Maybe you will find a solution.

  Good luck

• Try to disconnect from the iCloud on my Macbook Air (El Capitan 10.11.2) but in system preferences, it says I have to create a new password for my Admin account - and then the new password I get says "password does not match"?

  I am trying to add my outlook email account to the Mail app, but because it's the same email for my iCloud, for some reason, they are linked, and I discovered that I need to disconnect from iCloud, and then add the outlook account.

  But when I try to disconnect from the iCloud in system preferences > accounts on the internet, it says I have to create a separate password - but when I get one it says "passwords do not match"? I tried to do different and same, nothings working: S

  The dialog box is like this:

  [Stop using iCloud?]

  Create separate password for (name of the admin account)

  -You will no longer be able to log in or unlock your screen with your icloud password, and you will need to remember two passwords separately.

  iCloud password: __________

  New password: __________

  Check: _

  Index of password: __________

  [Use the separate password?]

  Not sure why that is, that the password does not when it's supposed to be the new s password?

  Also, I would like to know what to put in the box check?

  Help much appreciated!

  Thank you

  Oh wow. I just realized I was leaving the case confirm the void and the message "password does not match" mentioned. I just need to retype my password. Hilarious that I have not worked this one earlier.

• Current file to use when it is disconnected from the network wireless/wired - shared network drive

  Hello

  We have a problem where we receive a "file in use" message when you are disconnected from the network. To reproduce the problem, what we do is:

  (1) connect to the wired network wireless disabled with

  (2) create a test document

  (3) to enter text and save on network share

  (4) remove the network cable

  (5) add additional text

  (6) reconnect the network cable

  (7) try to save the file to the network share

  At the beginning by clicking the X is the new message you want to save. Click Yes and the message arrives until the next time you hit the Hit of X no. and he loses the last change.

  From here we then go up to the network share, open the file and it comes up with "file in use. Open read-only. File is opened by us (Administrator account), and there is NO temporary file in the shared folder.

  Tried so far:

  -Run net config server/autodisconnect:-1 for trying to stop it disconnect the share

  -Checked pane, pane preview and off 'display the description of the pop-up window for folder and desktop items '.

  -Windows Update

  We try to reproduce on wired connection, because it is easier to reproduce that disconnects wireless. Seems to have an impact on several operating systems. Share folder is shared on a Windows 2008 R2 x 64 machine.

  Is this a known problem or is there something that we can configure to try to prevent the locking file after logging out? Ideally, we want the decline to go unnoticed and provide uninterrupted service to the user, unless they are trying to save during the fall.

  Thanks in advance for comments :)

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.