Too bright light on the screen of Portege 3440CT (running Windows 2000)

Similar Questions

• The driver install Portege 4000 with Windows 2000 Pro

  Hi all.

  I'm having a small problem with a reinstall of windows 2000 on my portege p4000. Everything seems to work fine except for the wireless. All drivers are in and there is nothing in Device Manager is listed as unmanned, the wireless client shows the connection to my router, but ipconfig shows that there is no link at all.

  If I installed drivers and utilities in the wrong order? I would use my recovery CD, but they are damaged.

  Is anyone know the correct order to install drivers or where I can get this information?

  Thank you very much

  Rob.

  Hello

  The order of the Portege 4000 W2000 facilities:

  -Windows 2000
  -Chipset utility
  -Display driver
  -Audio driver
  -Toshiba Software Modem
  -SMSC IrCC NDIS Miniport V5.1.2500.0 device driver
  -Logitech Mouseware
  -Toshiba Common modules
  -Toshiba Power Saver
  -Toshiba Utilities
  -Toshiba Mobile Extension
  -Toshiba Console
  -Toshiba controls
  -Toshiba Hotkey Utility for display devices
  -Toshiba SD Card Driver
  -Toshiba internal LAN Driver
  -Driver LAN wireless
  -Toshiba Client Manager
  -Switch Device network
  -Toshiba Wireless Hotkey
  -Bluetooth Stack for Windows by Toshiba
  -Windows Media Player 7

  I hope this helps.

  Good bye

• Two messages appear on the screen of Portege R

  Hello

  I'm a newcomer, has soon
  I have a small problem when I start my Portege
  Before that I could use, two windows appear on the screen saying in Portuguese:

  Window 1

  Problema ao iniciar C:\Users\Vasco Afonso\AppData\Local\FormBalance\Bin\FormBalance.d he's X

  Impossível service o modulo especificado

  Window 2

  Problema ao iniciar C:\Users\Vasco Afonso\AppData\Local\DinerVirtual\Bin\DinerVitual X. DLL

  Impossível service o modulo especificado

  I ran twice MacAfee antivirus software and clean some Associates book lines, but it remains the same I boot the laptop.

  Clues appreciated, please

  Concerning

  V.

  Download and install https://www.piriform.com/ccleaner/download

  This program can remove the wrong file references.

• Satellite L655-11J: feuture request: turn off the light of the screen?

  It is more a request that it is:
  can add a key on the flashcard to the lights of the screen?
  Is it possible to do?

  and is it possible to turn off the lights (hard disks, power supply, lamps wireless, load) as on old laptops in the hardware configuration :)

  It requires more than a question

  Hello

  > is it possible to turn off the lights (hard disks, power supply, lamps wireless, load) as on old laptops in the hardware configuration

  I m 665 not owner, but in my U400 BIOS I could turn on and off the media lights using the option titled Illumination.

  > can add a touch on the flashcard to turn off the lights of the screen?
  > Is it possible to do?
  Don t think you can do that and who knows what software features would be available in the future

• Can I make in the light of the screen stay longer?

  I have my laptop connected to the TV to watch a game on the internet. The screen light turns off every few minutes. Can I change this?

  "Light of the screen?

  Do you mean it goes in STANDBY mode or HIBERNATION or SCREEN saver?

  Just disable the screen saver, change the time before computer sleeps / hibernates...

• When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  The solution is here:

  http://support.Microsoft.com/kb/321305?WA=wsignin1.0

• I want too much now if the Pro Flight Yoke System running on windows xp

  Original title: Pro Flight Yoke System

  Hello

  my flight simulator works fine now
  but now I want too much now if the Pro Flight Yoke System running on windows xp
  If only my knowledge please
  was soon luuk

  Hello

  Pro Flight Yoke System is compatible with Windows 7, Windows Vista and Windows XP.

  For more information visit: http://www.saitek.com/uk/prod/yoke.html

• stop the display of the controls at the bottom of the screen during video playback on windows media player

  How to stop the display of control at the bottom of the screen during video playback on windows media player

  How to stop the display of control at the bottom of the screen during video playback on windows media player

  Use the following steps and controls will NOT appear when you play multimedia player mode full-screen:

  Open Windows Media Player > tools > Options > Performance tab > uncheck "Controls display full screen" > apply/OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7.

  My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7. It was running and display very well last night. When I turned on this morning the monitor lit up but show just a gray-white screen and no office. When I attached an external monitor, I could see desktop and all other programs and Windows 7 routines seem to work very well.

  MB

  Press the Windows logo key and the p key, and then set up the PC to display on the built-in monitor only cycle through with the arrow key.  You can make this Store if you want - key Windows-p, right arrow once, paused for a few seconds & the laptop monitor should then appear normally.

  You can do so at the end of each session using the external display while you are ready for the use of the laptop on its own later.

• Migration of the domain controller Active Directory of windows 2000 server to a Server 2008.

  I have an old machine that is running Windows 2000 server and it's our only one domain controller in a mixed 2000/2003/2008 server environment. I would like to move to one of the servers 2008 Active Directory and make the PDC and withdraw from the old box of 2000.

  I saw a sea of documentation about the updated/move ActiveDirectory, but no clear examples of what I need to accomplish.

  Can I do a dcpromo on a 2003 server, synchronization of the 2000 box, retire the 2000 Server, then dcpromo th 2008 Server 2003 Server? I know this may seem simplistic to a complicated procedure, but I have not really found anything to support...

  A simple link to a procedure taken care of step by step would be great.

  Thanks for all the ideas in advance.
  Mike

  The Forum Windows Server would be the appropriate forum for your inquiry.

• Vmxnet3 disconnects abruptly from the vDS on a server running Windows R2 2012

  Vmxnet3 abruptly disconnects the vDS on a server running Windows 2012 R2. When this occurs, the affected server also loses its static IP address for a 169. address.

  Any ideas on what could cause this problem. It happens 2 Wk12 servers in a production environment of servers W2k12 100.

  Hello.

  Have you tried to re-install vmtools and restart on this vm?

• Brightness fluctuates as the screen changes (watch movies or open windows for example)

  Ive a brand new HP Pavilion 15 and Ive noticed when I opened a window or the screen goes a dark to a light image (for example, while watching the video), brightness adjusts in increments of half the second.

  For example, with a background image dark, I opened a window, I see in the white area of the window, half a second after opening the brightness of "whiteness" is rather dull and increments of bleachers, it becomes clearer and brighter.

  It takes about 3-4 seconds for the light to continue to increase.  I also note, it is not just the window that shines upward, but the lighter areas of the background also brighten at the same pace.

  Its extremely irritating and I can't find the settings to this.  It feels as if the brightness is self-adjustment according to what is on my screen, but I can do myself with the brightness setting!
  I have tried this with the setting of brightness placed as high as possible and at various levels but still seem to get the same result.

  Any help would be appreciated.  Is it a hardware failure?

  Jowelboy, if you're still here, I found a solution...

  If you have the Intel HD graphics card on your laptop, the GUI driver is probably the substitution of all the Windows settings you are trying to change.

  Follow these steps:

  1. Go to the start screen for Windows and search for 'Intel '. Under 'Settings' select "Intel HD Graphics" or Intel Graphics and Media Control Panel"(there are many ways to get to this setting). You can also right click on your desktop and select "Graphics properties", but make sure it has the "Intel" logo next to it.
  2. Once you are in the Intel graphic user interface, go to the power--> battery--> Turn OFF "Display Power Saving Technology." Depending on your driver version, this GUI can vary in appearance, but in the end, you are eager to find and disable "Display Power Saving Technology."
  3. You won't see a difference to what you click on 'Apply', how you will probably notice your screen brighten. It will ask you to confirm. That should solve.

  (I can't take credit for this fix. The nice people at EightForums.com posted a nice tutorial here, but if you're like me, you have tried everything that does not. It is the last step of the tutorial (described above) that it resolved for me. Someone should really sticky this issue as it has been updated a few times in these forums.

• 32L3441DG - bright green but the screen remains black

  I turned on my PC and my TV, everything has worked perfectly.

  When I came home from school, my PC was on but I turned off my TV when I went to school. I tried to turn it back on, the light was blinking red and green as usual when you turn it on. When he stopped flashing green, the screen remains black.

  

  Posted by Patrick p
  

  I turned on my PC and my TV, everything has worked perfectly.

  When I came home from school, my PC was on but I turned off my TV when I went to school. I tried to turn it back on, the light was blinking red and green as usual when you turn it on. When he stopped flashing green, the screen remains black.

  Hello, I have the same problem.
  I can hear TV-Programm, but the screen remains black.
  Uwe,

• Compatibility of the screen for Portege 4000

  the screen on my portege 4000 has just gone.a new screen would be more the thing is worth.there are a lot of old computers laptops toshiba on-site auction of spare parts, have a list of compatible screens that fit lcd portege connectors? laptop model, type etc.

  I put t found much information on the display in the Portege 4000 but to my knowledge it s 12 VF2072P01 Toshiba screen with resolution 1024 x 768

• Replacing the screen on Portege R500

  Hello

  I have a Portege R500 and I managed to break the screen.
  Part number is LTD121EWEK. Do I need to replace it with the same or are they some compatible screens which will be adapted?

  Thank you
  Wooju

  It is always best to use the same parts. So you'll be sure that everything will be OK.
  Question on other compatible screens is interesting, but I don't think anyone here can give a definitive answer or.

  Contact the nearest service Toshiba and ask for help. They have access to the database of Toshiba and they can check which screens can be used on this portable Portege model.

  By the way: I found the same info that you can use LCD TDG (LTD121EWEK) on the internet.