too many archiving logs to be generated

In my oracle9i database, too many archiving logs to be generated per day.

What could be the reason?

Kind regards
MKA.

Hello

experienced developers that there are too many duplicates present and implemented to date.

So developers are updating a Table in order to eliminate duplicate rows, is it good? I'm not sure I understand the situation.

In any case, during the update operation, you will need to control the destination of the journal archived so that it does not completely fill. You can do this BACKUP and delete newspapers archived or compress them or moving to another location.

Otherwise, try checking whith the developers if you define a primary key or a Unique constraint on this Table, in order to avoid the lines double in the future.

Hope this helps.
Best regards
Jean Valentine

Tags: Database

Similar Questions

  • How to control too many archived log generation

    Hello

    This is one of the interview questions,

    I answered it. Just as what the answer to this.

    How can we control the excessive generation of archived log?

    Thank you

    Hello;

    Archive is to ensure the recovery of the database, which can be done with NOLOGGING who does not put it at risk? (Data copy from one table to the other, for example).

    Excessive diagnosis Redo generation - limited with Nologging [ID 199298.1]

    Best regards

    mseberg

  • How many archived log sequence?

    Hello
    on10g R2,
    How to sequence in a journal archived?
    Any question about what sequences and threads and the SNA are in what journal archived?
    Or any other way to know who?
    Thank you.

    Select thread #, sequence #, first_change #, next_change # from v$ archived_log;

  • E/s and too many newspapers of archiving system

    Hi all

    It frustrates me. Our database of production began to produce too many logs archived redo instantly - once again. This has happened before; Two months ago, that our database was producing too many newspapers Archives. just then we started to get async IO error, we consulted a DBA and it restarted the database server by telling us that it was caused by the system (?).

    But after this restart, the amount of archive logs decreased significantly. I was remove the logs by hand (350 GB GB 300 DB arch), and after that the archive logs don't overrun never 10% of the area of archive of 300 GB. Currently, the newspapers increase by 1% (3 GB) for 7-8 minutes, which are already too.

    I checked in Enterprise Manager, the graph of I/o system is continuous and details show the process as ARC0, ARC1, LGWR (read sequential log file, db file write parallels are most active). Also Phsycal bed are very contradictory and exceed 30000 Ko at times. Undo tablespace is full almost all the time causing ORA-01555.

    The symptoms above all started today. The database is closed at 03:00 to perform a backup in offline mode and is open until 06:00 every day.

    Nothing has changed on the database (9.2.0.8), applications (11.5.10.2) or BONES (AIX 5.3).

    What is the reason for this more foolish behavior? Please help me.

    Thanks in advance.
    Kind regards.
    Burak

    So you say that log switches are increased by 5-6 to 130-140? It's a huge and unacceptable increase amount!

    Can you please also post the last lines of your alert.log file?

    What is the result of the following query?

    SQL > select Blocks_Processed sofar, totalwork Total_Work, round ((sofar/totalwork) * 100, 2) Percentage_Completed, Total_Work_Left totalwork-sofar, start_time Start_Time, round ((elapsed_seconds/60), 0) Elapsed_Minutes, substr (message, 1, 33) Message, username
    v $ session_longops;

    Ogan

  • DataGuard slowed db: generating the archive logs?

    Hello

    I have a 11.2.0.4 db using Data Guard to play with. I just set up and could do a failover and vice versa.

    However I have noticed there are great number of generated archive logs, one every minute. As it is an empty database, I wonder why?

    No recovery is generated by sessions:

    Select v$ session.sid, username, value/1024/1024 redo_size_MB
    v $ sesstat, v$ statname of v$ session
    where v$ sesstat. STATISTICS of # = v$ statname. STATISTICS FROM #.
    and v$ v = session.sid $sesstat.sid
    and name = "redo size."
    and > 0
    and username is not null
    2 3 4 5 6 7 8 value order;

    no selected line

    Logs are generated on the disc:

    -rw - r - 1 oracle oinstall K 77, 30 Nov 12:06 o1_mf_1_1119_c5rcg7b1_.arc

    -rw - r - 1 oracle oinstall 35K 30 Nov 12:07 o1_mf_1_1120_c5rcj3gh_.arc

    -rw - r - 1 oracle oinstall 103K 30 Nov 12:08 o1_mf_1_1121_c5rckzo0_.arc

    -rw - r - 1 oracle oinstall 36K 30 Nov 12:09 o1_mf_1_1122_c5rcmvo2_.arc

    -rw - r - 1 oracle oinstall 35K 30 Nov 12:10 o1_mf_1_1123_c5rcoqry_.arc

    -rw - r - 1 oracle oinstall 35K 30 Nov 12:11 o1_mf_1_1124_c5rcqmxm_.arc

    -rw - r - 1 oracle oinstall 35K 30 Nov 12:12 o1_mf_1_1125_c5rcsj2j_.arc

    -rw - r - 1 oracle oinstall 35K 30 Nov 12:13 o1_mf_1_1126_c5rcvd3t_.arc

    Someone has an idea of what to check?

    Concerning

    3

    Something abnormal. If this a test box, are you allowed to bounce the DB?

    If so, give it a shot and try.

    -Jonathan Rolland

  • Generational archiving log

    Hello

    Can we define generational archiving log in our pfile file?


    Regs,
    Brijesh

    Hello

    parameter Set ARCHIVE_LAG_TARGET

  • Find the archive logs generated per day (for 7.3.4 database)?

    I use a query like the one below to determine the average amount archives logs generated per day for a database for a month:

    Select sum (GB_USED_PER_DAY) count (GB_USED_PER_DAY) in (SELECT
    To_char(completion_time,'YYYY-mm-DD') completion_date,
    round (SUM (block_size *(blocks+1)) / 1024 / 1024 / 1024, 2) GB_USED_PER_DAY
    V $ archived_log
    WHEN TRUNC (completion_time) BETWEEN
    TRUNC(SYSDATE-30) AND TRUNC (SYSDATE)
    GROUP OF TO_CHAR(completion_time,'YYYY-MM-DD')
    order by 1 desc);

    This query does not work on Oracle 7.3.4 database. Anyone know how I can calculate average archive generation of newspapers per day for Oracle 7.3.4?

    Thanks in advance!

    Select substr(first_time,1,8), round (sum (bytes) /(1024*1024)) MB of v$ log group by substr (first_time, 1, 8);

  • When logging in to my email account, I get a red message that I tried to sign in too many times using an incorrect id or password

    After signing several times in & control my mail today, suddenly when signing once again, I get a red message that I tried to sign in too many times using an incorrect id or the password. WHAT? I have NOT changed or the other lately... and have certainly not today! I don't like having my daily work routine interrupted by this measure obviously fake message/security, when I don't do anything different from what I have already done many times today! Please correct this problem immediately... Without that I have to change anything or even interrupt my schedule. Thank you. By the way... I grow increasingly wary of any company of which the customer has as much bad contacting help with their product. And grow more and more suspicious with this incident. What is happening with your safety that I can't just leave my settings as is? Please take the time to look at this before decide me that your company's products just aren't worth the headache.

    Hello

    · What email client you use to access your emails?

    If you work on Hotmail or Windows Live then it would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/

    You can also access: Microsoft's strategy concerning lost or forgotten passwords: http://support.microsoft.com/kb/189126

  • Windows Mail is unable to send with 421 0x800CCC67 Too many messages. Third or fourth attempt is OK.

    Windows Vista SP2 on Dell Inspiron 530 HP s 2Gb 32-bit

    Windows Mail 6.0

    Complete error message is

    An unknown error has occurred. 'Xxxxxx', account: 'xxxxxx', server: 'mail.btinternet.com', Protocol: SMTP, server response: ' 421 too many messages', Port: 25, secure (SSL): no, Server error: 421, error number: 0x800CCC67

    Outgoing mail SMTP server (mail.btinternet.com) btinternet must

    Outgoing e-mail server has "requires authentication' checked (same settings as incoming).

    If I re - try several times, then the mail will be sent OK.

    We are talking only about 1 message per 'send '.

    I recently deleted a load of messages in the Inbox of reception and Sendbox - but that did not help.

    I tried to change the port number - but get the same question.

    I don't know if the problem is with Windows Mail or server btinternet.  The server stores not an excessive number of messages.

    As I thought might be the case, the problem was at the level of the BT server.

    I logged the issue with the support of BT Office.  Initially they wanted me reinstalled Windows Mail (and potentially lose all my email archives).  I resisted that and they to the engineering team.  I don't know what they have done (I'm told it was a known problem and they had to set some parameters at the end of the server).

    Everything they do seems to have solved satisfactorily the question, which has not reappeared.

    I think that it's rarely worth to try to resolve the generic Windows error codes only via Windows.

  • Too many running processes?

    While playing a game online (Aces High), the program stops working and I am getting an Aces High EXE.

    When you talk with their tech support they said I have too many processes running during the game. I looked into the Task Manager and it says I have 64 of them running. Aces High-tech support said I should about 35 processes running and maybe I could eliminate some of them. They also said that I should reduce the detail of the screen of the game a little.
    I use my pc for a game online and email and occasional printing. Should I have that a lot of process?

    I tried to find out what processes are for and I really can't understand them. So I don't know what to delete. What can I do to improve the performance of the machine without having to resort to the put in new RAM or something like that?
    It is only a year that the system specifications are as follows:
    HP model a6755y
    9550 Quad Core 2.2 Ghz AMD processor
    6.0 GB OF RAM
    Vista 64-bit system

    I thought that my system would be more than capable to run this game online with no problems.

    Can anyone help?

    Hello

    Yes, your system must be running that game however, there may be other reasons that he has trouble,
    including incorrect programming of their own. The tech you suport contacted had no idea regarding
    the real question.

    Have you tried running the 32-bit browser?

    See this site
    http://pietschsoft.com/post/2006/12/Vista-experience-update-Windows-Vista-x64-runs-32-bit-Internet-Explorer-by-default.aspx

    Internet Explorer 32-bit = C:\Program Files (x 86) \Internet Explorer\iexplore.exe

    Internet Explorer 64-bit = C:\Program may Explorer\iexplore.exe

    ====================================================

    These could help: (for browsers of 32 and 64-bit)

    Maybe something is blocking.

    What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
    machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

    IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

    IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

    Close and restart IE

    not better?

    IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
    "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

    Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
    are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

    Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
    are bad, but some can cause your question (toolbars are BHO).
    http://securityxploded.com/bhoremover.php

    Startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Also get Malwarebytes - free - use as scanner only.

    http://www.Malwarebytes.org/

    --------------------------------

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Help: too many newspapers using EzVPN

    Hello

    I've implemented EzVPN on ASA Version 9.2 (4) 5. My goal is just the address pool (10.11.10.x) VPN access everywhere instead of using the actual IP address of my laptop. NAT is not necessary on the SAA outside interface. I even only to not configure the inside interface.

    Everything works as expected, with the exception of too many even syslog messages from ' % ASA-4-402117: IPSEC: received a package not IPSec (Protocol = UDP) 10.11.10.1 to 10.11.10.255 "are generated.

    Configuration is shown below. Please help how I can get rid of these logs. Thank you very much.

    Robert

    local pool EZVPN_POOL 10.11.10.1 - 10.11.10.254 255.255.255.0 IP mask
    !
    interface Vlan1
    nameif outside
    security-level 0
    IP address dhcp setroute
    !
    permit same-security-traffic intra-interface
    !
    Crypto ipsec transform-set ikev1 VPN_TRAN aes - esp esp-sha-hmac
    Crypto ipsec pmtu aging infinite - the security association
    Dynamic crypto map VPN_DYMAP 10 set transform-set VPN_TRAN ikev1
    card crypto VPN_MAP 10-isakmp dynamic ipsec VPN_DYMAP
    VPN_MAP interface card crypto outside
    !
    Crypto ikev1 allow outside
    IKEv1 crypto policy 10
    preshared authentication
    aes encryption
    md5 hash
    Group 2
    life 86400!
    internal PROXY_VPN_POLICY group policy
    PROXY_VPN_POLICY group policy attributes
    value of 8.8.8.8 DNS Server 4.2.2.2
    Ikev1 VPN-tunnel-Protocol
    allow password-storage
    Split-tunnel-policy tunnelall
    !
    username privilege of John password XXXXXX 0
    username John attributes
    VPN-group-policy PROXY_VPN_POLICY
    !
    type tunnel-group PROXY_VPN_GROUP remote access
    attributes global-tunnel-group PROXY_VPN_GROUP
    address EZVPN_POOL pool
    Group Policy - by default-PROXY_VPN_POLICY
    IPSec-attributes tunnel-group PROXY_VPN_GROUP
    IKEv1 pre-shared key XXXXXX
    !

    Hi robert.huang,

    The error "% ASA-4-402117: IPSEC: received a package not IPSec (Protocol = UDP) 10.11.10.1 to 10.11.10.255" says that on the remote side sends traffic from 10.11.10.1 to 10.11.10.255 which is not sent through the IPSec tunnel. You can confirm with them.

    In addition, you can adjust the level of severity of this log message and define what level of logs must be sent to your syslog server so that it does not understand this, but I wouldn't recommend it.

    Kind regards
    Dinesh Moudgil

    PS Please rate helpful messages.

  • Error at the Check-in similar - too many items

    Hi all

    I have some documents that I need to Check-In similar to say a single A/B/C in A/B/D account.

    I did check in similar a few docs until I have started to receive the error that is mentioned below:

    When I check in similar CS throws an error as 'invalid metadata for < content ID >. Too many items.

    In addition, in the server it logs shows below error.

    Please suggest what the problem is here and what is his solution.

    < 29 December 2015 16:59:38 IST > < error > < oracle.ucm.idccs > < CMU-CS-060003 > < event generated by the user 'weblogic' host 'ucm.coxandkings.com:16200 '. >

    < 29 December 2015 16:59:38 IST > < error > < oracle.ucm.idccs > < CMU-CS-000001 > < general exception

    intradoc.common.ServiceException:! csCollectionInvalidMeta, CKIL_264341! csCollectionContentMaxed

    at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)

    at intradoc.server.Service.buildServiceException(Service.java:2260)

    at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)

    Collections. CollectionUserHandler.verifyContentNotMaxed (CollectionUserHandler.java:2997)

    Collections. CollectionUserHandler.verifyContentNotMaxed (CollectionUserHandler.java:2979)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)

    at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)

    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)

    at intradoc.server.Service.doCodeEx(Service.java:533)

    at intradoc.server.Service.doCode(Service.java:505)

    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)

    at intradoc.server.Service.doAction(Service.java:477)

    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)

    at intradoc.server.Service.doActions(Service.java:472)

    Collections. CollectionValidateCheckinData.doFilter (CollectionValidateCheckinData.java:64)

    at intradoc.shared.PluginFilters.filterWithAction(PluginFilters.java:114)

    at intradoc.shared.PluginFilters.filter(PluginFilters.java:68)

    at intradoc.server.DocServiceHandler.validateCheckinData(DocServiceHandler.java:1566)

    at sun.reflect.GeneratedMethodAccessor310.invoke (unknown Source)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)

    at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)

    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)

    at intradoc.server.Service.doCodeEx(Service.java:533)

    at intradoc.server.Service.doCode(Service.java:505)

    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)

    at intradoc.server.Service.doAction(Service.java:477)

    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)

    at intradoc.server.Service.doActions(Service.java:472)

    at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1322)

    at intradoc.server.Service.executeSubServiceCode(Service.java:3866)

    at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:1200)

    at intradoc.server.Service.executeServiceEx(Service.java:3861)

    at intradoc.server.Service.executeService(Service.java:3845)

    at intradoc.server.Service.doSubService(Service.java:3760)

    at sun.reflect.GeneratedMethodAccessor268.invoke (unknown Source)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)

    at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)

    at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)

    at intradoc.server.Service.doCodeEx(Service.java:550)

    at intradoc.server.Service.doCode(Service.java:505)

    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)

    at intradoc.server.Service.doAction(Service.java:477)

    at intradoc.server.Service.doScriptableAction(Service.java:3807)

    at sun.reflect.GeneratedMethodAccessor304.invoke (unknown Source)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)

    at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)

    at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)

    at intradoc.server.Service.doCodeEx(Service.java:550)

    at intradoc.server.Service.doCode(Service.java:505)

    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)

    at intradoc.server.Service.doAction(Service.java:477)

    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)

    at intradoc.server.Service.doActions(Service.java:472)

    at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)

    at intradoc.server.Service.executeActions(Service.java:458)

    at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)

    at intradoc.server.Service.doRequest(Service.java:1890)

    at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)

    at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)

    at intradoc.idcwls.IdcServletRequestUtils.doRequest(IdcServletRequestUtils.java:1343)

    at intradoc.idcwls.IdcServletRequestUtils.processFilterEvent(IdcServletRequestUtils.java:1715)

    at intradoc.idcwls.IdcIntegrateWrapper.processFilterEvent(IdcIntegrateWrapper.java:222)

    at sun.reflect.GeneratedMethodAccessor225.invoke (unknown Source)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.executeContentServerIntegrateMethodOnConfig (ServletUtils.java:1600)

    to idcservlet. IdcFilter.doFilter (IdcFilter.java:352)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:111)

    at java.security.AccessController.doPrivileged (Native Method)

    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)

    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)

    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)

    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)

    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:111)

    at java.security.AccessController.doPrivileged (Native Method)

    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)

    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)

    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)

    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)

    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)

    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)

    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)

    Kind regards

    Sanket

    https://jonathanhult.com/blog/2013/07/maximum-folders-and-items-folders_g-WebCenter-content-11g/

    Jonathan

    https://jonathanhult.com

  • Oracle database archive logs

    Hi all

    I searched the Oracle and Internet Documents. It is really hard to get information on the management of the archive Log, so I thought to post it here:

    Now, our Database 9i (EBS 11.5.x) was in no archive mode, so I allowed him to archive mode.

    Edit the pfile $ORACLE_HOME/admin/SID/pfile who will be /oracle/proddb/9.2.0/dbs/initPROD.ora

    ############################

    # Archive Log Destinations-benr(10/15/04)

    ############################

    Log_archive_dest_1 = ' location = / Uncordon / archive.

    log_archive_start = TRUE


    then connect to the database





    SQL > shutdown normal;

    SQL > startup mount exclusive;

    SQL > alter system set log_archive_start = TRUE scope = spfile;
    SQL > alter system set log_archive_dest_1='LOCATION= /oracle/archivelog '     scope=both;
         SQL > alter archivelog database;
    SQL > CHANGE the START of the SYSTEM ARCHIVE LOG;
    SQL > alter database open;
    SQL > alter system archive log all;
    SQL > change the start of the archive log system;
    SQL > archive log start;


    The next day, I checked the location of archive and sparked an archive of 1 GB even if there is no activity on the database.

    root@test4:/oracle/archivelog>ls
1_844.dbf   1_862.dbf   1_880.dbf   1_898.dbf   1_916.dbf   1_934.dbf
1_845.dbf   1_863.dbf   1_881.dbf   1_899.dbf   1_917.dbf   1_935.dbf
1_846.dbf   1_864.dbf   1_882.dbf   1_900.dbf   1_918.dbf   1_936.dbf
1_847.dbf   1_865.dbf   1_883.dbf   1_901.dbf   1_919.dbf   1_937.dbf
1_848.dbf   1_866.dbf   1_884.dbf   1_902.dbf   1_920.dbf   1_938.dbf
1_849.dbf   1_867.dbf   1_885.dbf   1_903.dbf   1_921.dbf   1_939.dbf
1_850.dbf   1_868.dbf   1_886.dbf   1_904.dbf   1_922.dbf   1_940.dbf
1_851.dbf   1_869.dbf   1_887.dbf   1_905.dbf   1_923.dbf   1_941.dbf
1_852.dbf   1_870.dbf   1_888.dbf   1_906.dbf   1_924.dbf   1_942.dbf
1_853.dbf   1_871.dbf   1_889.dbf   1_907.dbf   1_925.dbf   1_943.dbf
1_854.dbf   1_872.dbf   1_890.dbf   1_908.dbf   1_926.dbf   1_944.dbf
1_855.dbf   1_873.dbf   1_891.dbf   1_909.dbf   1_927.dbf   1_945.dbf
1_856.dbf   1_874.dbf   1_892.dbf   1_910.dbf   1_928.dbf   1_946.dbf
1_857.dbf   1_875.dbf   1_893.dbf   1_911.dbf   1_929.dbf   1_947.dbf
1_858.dbf   1_876.dbf   1_894.dbf   1_912.dbf   1_930.dbf   lost+found
1_859.dbf   1_877.dbf   1_895.dbf   1_913.dbf   1_931.dbf   test.txt
1_860.dbf   1_878.dbf   1_896.dbf   1_914.dbf   1_932.dbf
1_861.dbf   1_879.dbf   1_897.dbf   1_915.dbf   1_933.dbf

    Question

    1. How can I delete old logs archiving without using RMAN?

    2. How should I know which Archives connects to keep and delete?

    3. is there a way to know why the database generates so many newspapers to check-in?

    Hello

    Yes, you must keep this archive. You can schedule the job to compress files to archive (record use of space) and move it to another place as a backup.

    You can schedule both COLD backup once a week, in this case it is scabies archive for a week.

    HTH

  • How OE 6.0 behaves if there are too many messages stored in the Inbox or sent folders?

    Ability of OE message

    How OE 6.0 behave if there are too many messages stored in the Inbox or sent folders. And the number depends on whether or not they have been read. Is there a limit on the file deleted or is it supported by Auto removes permanent?

    Partially covered in your other post.

    General precautions for Outlook Express:

    Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

    Information on the maximum size of the .dbx files that are used by Outlook Express:
    http://support.Microsoft.com/?kbid=903095

    After you're done, followed by compacting your folders manually while working * off * and do it often.

    Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

    Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3

    And backup often.

    Outlook Express Quick Backup (OEQB Freeware)
    http://www.oehelp.com/OEBackup/default.aspx

  • too many startup programs

    Too many programs that start automatically when I log in I have to change this

    To identify what loads when you start using Autoruns (freeware from Microsoft).
     http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

    With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

    Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

Maybe you are looking for